Scribd
Upload
72 views18 pages

Test Matrix

The document describes an interface shear test that will be conducted using CLT panels. It includes details such as: - The CLT that will be used is 3-ply with a depth of 4.15 inches - Samples of size 6 inches by 5.5 inches will be cut from the CLT panels - A total of 36 samples will be cut and tested with either common smooth shank nails or ring shank nails - The volume of UHPC required for the interface shear test is estimated to be 1.72 cubic feet.

Uploaded by

Bipul Poudel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
72 views18 pages

Test Matrix

The document describes an interface shear test that will be conducted using CLT panels. It includes details such as: - The CLT that will be used is 3-ply with a depth of 4.15 inches - Samples of size 6 inches by 5.5 inches will be cut from the CLT panels - A total of 36 samples will be cut and tested with either common smooth shank nails or ring shank nails - The volume of UHPC required for the interface shear test is estimated to be 1.72 cubic feet.

Uploaded by

Bipul Poudel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 18

Interface Shear Test

Variables

Nail Types

Moisture State of CLT

Surface Roughness

Minor Test
Moisture Content Test

Summary
CLT USED = 3 ply (4.15" Depth)
Dimension of CLT panel available in Lab
Number of CLT panel required
Considering 0.25" as thickness of cutter
No. of 2x6 in width of 3 layer CLT
No. of 6"x5.5" x Full depth of CLT obtained from each row
Total wood pieces that can be cut
No. of CSHN required
No. of RSN required
Volume of UHPC required (ft^3)
CSHN = Common Smooth Shank Round Headed Nail (L=2.5" and Dia.=0.131")
RSN=Ring Shank Nail (L=2.4" and Dia.=0.157")

Details No of tests

Common Smooth Shank Round Headed Nail (3.32mm x 63.5mm) 6


Ring Shank Nail (4mmx60mm) 6
CSHN with water proofing membrane 6
CSHN with epoxy 6
RSN with water proofing membrane 6
RSN with epoxy 6
Not sure what to include here

CLT USED = 3 ply (4.15" Depth)


96" x 48"
1

4
16 16.69565217
64
36
36
1.576
No. of
No. of CSHN nails
Dimension of samples Wood pieces required RSN
required
required
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12
5.5"(H) x 5.5" (L) x Full depth of CLT 6 12

Sub Total(A) 36 36 36

Min[5.5" (H) x 5.5" (L) x Full depth of CLT] 8 0 0


Sub Total (B) 8
Total 44 36 36
Thickness
of UHPC Volume of UHPC
(") required (ft^3)
1.25 0.263
1.25 0.263
1.25 0.263
1.25 0.263
1.25 0.263
1.25 0.263

1.576

0 0

1.576
Determination of moisture transfer from UHPC to CLT

Density of CLT 30
Density of UHPC 150
Desity of styrofoam 2

Dimension of CLT

Number of specimens Length (in)

CLT + UHPC (With EPOXY INTERFACE) 6 6


CLT+UHPC (Without EPOXY INTERFACE) 6 6
Styrofoam+UHPC 6 6
SUMMATION 18

Summary
Total number of moisture content specimen 18
Total Number of CLT Block Required 12

6
Total Number of Styrofoam Block Required
Total UHPC Volume Required 1.88 ft^3
pcf
pcf
pcf

Dimension of CLT Dimension of UHPC Layer (Side Face) Dimension of UHPC Laye

Breadth(in) Height (in) Length(in) Breadth(in) Thickness(in) Length(in)

5.5 4 6 5.25 1.25 6


5.5 4 6 5.25 1.25 6
5.5 4 6 5.25 1.25 6
Dimension of UHPC Layer (Top Face)
Number of Horizontal
Number of vertical face
Breadth(in) Thickness(in) face

6.75 1.25 2 2
6.75 1.25 2 2
6.75 1.25 2 2
Volume of UHPC required Volume of CLT Weight of each specimen

(ft^3) (ft^3) (lb)

0.625 0.458 17.92


0.625 0.458 17.92
0.625 0.458 15.78
1.88 1.38
Interface Shear Test

Variables

Nail Types

Moisture State of CLT

Surface Roughness

Summary
CLT USED = 3 ply (4.15" Depth)
Dimension of CLT panel available in Lab
Number of CLT panel required
Considering 0.25" as thickness of cutter
No. of 2x6 in width of 3 layer CLT
No. of 6"x5.5" x Full depth of CLT obtained from each row
Total wood pieces that can be cut
No. of CSHN required
No. of RSN required
Volume of UHPC required (ft^3) for interface shear test
CSHN = Common Smooth Shank Round Headed Nail (L=2.5" and Dia.=0.131")
RSN=Ring Shank Nail (L=2.4" and Dia.=0.157")

Details No of tests

Common Smooth Shank Round Headed Nail (3.32mm x 63.5mm) 6


Ring Shank Nail (4mmx60mm) 6
CSHN with water proofing membrane 6
CSHN with epoxy 6
RSN with water proofing membrane 6
RSN with epoxy 6
Not sure what to include here

CLT USED = 3 ply (4.15" Depth)


96" x 48"
1

4
15
60
36
36
1.72
No. of
No. of CSHN nails
Dimension of samples Wood pieces required RSN
required
required
6"(H) x 5.5" (L) x Full depth of CLT 6 12
6"(H) x 5.5" (L) x Full depth of CLT 6 12
6"(H) x 5.5" (L) x Full depth of CLT 6 12
6"(H) x 5.5" (L) x Full depth of CLT 6 12
6"(H) x 5.5" (L) x Full depth of CLT 6 12
6"(H) x 5.5" (L) x Full depth of CLT 6 12

Sub Total(A) 36 36 36
Thickness
of UHPC Volume of UHPC
(") required (ft^3)
1.25 0.286
1.25 0.286
1.25 0.286
1.25 0.286
1.25 0.286
1.25 0.286

1.719

You might also like