Name: ______________________________________ Date: ________________________

Virtual Lab (Gizmo): Mineral Identification

Vocabulary: crystal, density, hardness, homogeneous, luster, mass, mineral, streak, volume

Prior Knowledge Questions (Do these BEFORE using the Gizmo.)

1. Suppose you find a yellow piece of metal in a stream. How could you tell if it is real gold?

_________________________________________________________________________

_________________________________________________________________________

2. In the city a street peddler offers to sell you a diamond ring for thirty bucks. How could you
test if the rock in the ring is a real diamond?

_________________________________________________________________________

_________________________________________________________________________

Gizmo Warm-up: Determining density

A mineral is a naturally formed crystal. You can
identify a mineral by its properties. In the Mineral
Identification Gizmo, under Choose property to test,
select Density.

1. Mass is the amount of substance in an object.

Drag the mineral sample onto the balance.

What is the mass of the mineral? ___________

(Units are grams, g.)
Balance Grad. cylinder
T
2. Volume is the amount of space an object takes up. The volume is measured by how
much the water rises in a graduated cylinder. Drag the mineral into the cylinder.

What is the volume of the mineral? ___________ (Units are milliliters, or mL.)

3. Density is a measure of how “light” or “heavy” an object is for its size. To find the density
of an object, divide the mass by the volume. (Calculators are recommended.)

What is the density of the mineral? _____________ (Units are grams per milliliter, g/mL.)

2019
 Get the Gizmo ready:
Activity A:  Under Property, select Appearance.
Mineral properties  Check that Sample A is on the screen. (If not,
press Previous until sample A is there.)

Question: What properties allow us to identify minerals?

1. Observe: Minerals are made of atoms in a repeating pattern and often form crystals. The
shapes of crystals can help identify the mineral. Luster is the way the mineral’s surface
reflects light. There are many ways to describe luster, four examples are shown. Color can
sometimes be a useful way to identify a mineral, but it is not always reliable.

A. Describe the crystal shape of Sample A: __________________________________

B. Describe its color and luster: _________________________-

___________________

2. Calculate: Select the Density test. What is the density of Sample A? __________________

3. Measure: Select the Hardness test. Hardness is a measure of how easily a mineral can be
scratched. It is measured on a scale of 1 to 10 called Mohs scale. If a mineral scratches a
fingernail (hardness 2.5) but not a penny (3.5), its hardness is about 3.

A. Drag the mineral sample across each test object. Which objects are scratched?

___________________________________________________________________

B. What is the estimated hardness of the mineral? _____________________________

4. Observe: Select the Streak test. The streak is the color of a material’s powder. You can
observe the streak by rubbing the mineral across a tile called a “streak plate.”

Drag the mineral sample across the streak plate. What color is the streak? ______________
Note: If the mineral is harder than the streak plate (about 6.5), it won’t leave a streak.

5. Observe: Select the Acid test. Some minerals cause hydrochloric acid to bubble and fizz.

Drag the eyedropper of acid over to the mineral. Does the acid fizz? ___________________

6. Identify: Now it is time to identify the mineral. Look at your Mineral Key. Find a mineral that
has properties that match Sample A. Type the name under Mineral name in the Gizmo and
press Submit. It may take several guesses to get it right.

2019
What mineral is Sample A? __________________________________________________

2019
 Activity B:
Get the Gizmo ready:
Identifying
 Click Next so that Sample B is showing.
minerals

Goal: Use a key to identify minerals.

1. Collect data: Use the Gizmo to collect data about minerals B through F. Fill in the data table.

Crystal Color/ Fizzes in

Sample Density Hardness Streak
shape Luster acid?

2. Identify: Use the Mineral Key to identify minerals B through F. Submit your answers in the
Gizmo. (Use the Previous and Next buttons to switch samples.) Record your results below:

Sample Mineral name (first try) Mineral name (actual) Correct on first try?
B
C
D
E
F

3. On your own: Continue to practice identifying minerals. (There are 26 samples in the Gizmo:
A through Z.) Record your findings in your notebook or on separate sheets of paper.

4. Form a conclusion: Which properties were most useful for identifying minerals? Why?

_________________________________________________________________________

_________________________________________________________________________

2019
 Mineral Key
Use the following steps to identify a mineral:
1. Decide if the mineral is metallic or non-metallic based on its luster and streak.
2. If the mineral is non-metallic, decide if it is light or dark in color.
3. Find a mineral in the list with the same density and hardness as your sample.
4. Check that the other properties—crystal shape, color, streak, acid reaction—match.

Metallic minerals (luster of each mineral ranges from metallic to dull)

Crystal Fizzes
Mineral Color Density Hardness Streak
shape in acid?
Galena Cubic/
Gray 7.5 g/mL 3 Dark gray No
(lead ore) irregular
Golden
Gold Irregular 19.3 g/mL 3 Yellow No
yellow
Graphite
Irregular Dark gray 2.2 g/mL 2 Gray No
(pencil lead)
Hematite Red-brown
Irregular 5.3 g/mL 6 Red-brown No
(iron ore) to black
Magnetite
Irregular Black 5.2 g/mL 6 Black No
(iron ore)
Malachite
Irregular Dark green 4.0 g/mL 4 Light green No
(copper ore)
Pyrite Cubic/ Greenish
5.0 g/mL 6 Dark green No
(fool’s gold) irregular yellow
Silver
Silver Irregular 10.5 g/mL 3 Gray No
gray

Non-metallic minerals, mostly dark in color (glassy, pearly or dull luster)

Crystal Color/ Fizzes
Mineral Density Hardness Streak
shape luster in acid?
Corundum Hexagon/ Dark red,
4.0 g/mL 9 No streak No
(Ruby) irregular glassy/dull
Dark red,
Garnet Ball shape 4.0 g/mL 7 No streak No
glassy/dull
Black/white,
Mica Flat sheets 3.0 g/mL 3 White No
glassy
Hexagon/ Variable,
Topaz 3.5 g/mL 8 No streak No
irregular glassy

2019
Non-metallic minerals, mostly light in color (glassy, pearly or dull luster)
Crystal Color/ Fizzes
Mineral Density Hardness Streak
shape luster in acid?
Rhombus/ Variable,
Calcite 2.7 g/mL 3 White Yes
irregular glassy
Pyramid/ Variable,
Diamond 3.5 g/mL 10 No streak No
irregular glassy
Variable,
Dolomite Irregular 2.9 g/mL 4 White Yes
pearly/dull
Rectangle/ Pink/white,
Feldspar 2.6 g/mL 6 White No
irregular pearly
Pyramid/ Variable,
Fluorite 3.2 g/mL 4 White No
irregular glassy
Rectangle/ Variable,
Gypsum 2.3 g/mL 2 White No
irregular pearly/dull
Variable,
Halite Cubic 2.2 g/mL 3 White No
glassy
Variable,
Kaolinite Irregular 2.6 g/mL 2 White No
dull
Hexagon/ Variable,
Quartz 2.6 g/mL 7 No streak No
irregular glassy
Yellow,
Sulfur Irregular 2.1 g/mL 2 Yellow No
waxy
Variable,
Talc Irregular 2.7 g/mL 1 White No
pearly

2019