Ka331 1010762
Ka331 1010762
Ka331 1010762
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.fairchildsemi.com
KA331
V-F Converter
Features Description
• Guaranteed linearity: 0.01% max. This voltage to frequency converter provides the output
• Low power dissipation: 15mW at 5V pulse train at a frequency precisely proportional to the
• Wide range of full scale frequency: 1Hz to 100KHz applied input voltage. The KA331 can operate at power
• Pulse output compatible with all logic forms supplies as low as 4.0V and be changed output frequency
• Wide dynamic range: 100dB min at 10KHz full scale from 1Hz to 100KHz. It is ideally suited for use in simple
frequency low-cost circuit for analog-to digital conversion, long term
integration, linear frequency modulation or demodulation,
frequency-to-voltage conversion, and many other functions.
8-DIP
Rev. 1.0.0
©2001 Fairchild Semiconductor Corporation
KA331
Electrical Characteristics
Parameter Symbol Conditions Min. Typ. Max. Unit
VFC Non-Linearity VFCNL 4.5 ≤ VCC ≤ 20V - ±0.003 ±0.01 % Full-Scale
Conversion Accuracy Scale Factor ACCUR VI = -10V, RS = 14KΩ 0.90 1.00 1.10 KHz/V
Chang Of Gain With VCC VCC∆G/VCC 4.5V ≤ VCC ≤ 10V - 0.01 0.1 %/V
10V ≤ VCC ≤ 40V - 0.006 0.06
Rated Full - Scale Frequency f VI = -10V 10.0 - - KHz
INPUT COMPARATOR
Offset Voltage VIO 0°C ≤ TA ≤ +70°C - ±3 ±10 mV
Bias Current IBIAS - - -80 -300 nA
Offset Current IIO - - ±8 ±100 nA
Common-Mode Range VCM 0°C ≤ TA ≤ +70°C -0.2 - VCC-2.0 V
TIMER (PIN 5)
Timer Threshold Voltage VTH - 0.63 0.667 0.701 ×VCC
VCC = 15V,
Input Bias Current IBIAS - ±10 ±100 nA
0V ≤ V5 ≤ 9.9V
V5 = 10V - 200 1000 nA
Saturation Voltage VSAT I = 5mA - 0.22 0.5 V
CURRENT SOURCE (PIN 1)
Output Current IO RS = 14KΩ, V1 = 0V 116 136 156 µA
Change with Voltage ∆IO/∆V1 0V ≤ V1≤ 10V - 0.2 1.0 µA
Current Source Off Leakage ILKG - - 0.02 10.0 nA
REFERENCE VOLTAGE (PIN 2)
Reference Voltage VREF - 1.70 1.89 2.08 VDC
Stability vs Temperature STT - - ±60 - ppm/°C
Stability vs Time, 1000Hours STT - - ±0.1 - %
LOGIC OUTPUT (Pin 3)
I = 5mA - 0.15 0.50
Saturation Voltage VSAT V
I = 3.2mA - 0.10 0.40
Off Leakage ILKG - - ±0.05 1.0 µA
SUPPLY CURRENT
VCC = 5V 1.5 3.0 6.0
Supply Current ICC mA
VCC = 40V 2.0 4.0 8.0
2
KA331
Typical Applications
3
KA331
Mechanical Dimensions
Package
Dimensions in millimeters
8-DIP
)
6.40 ±0.20
0.031
0.79
0.252 ±0.008
1.524 ±0.10
0.060 ±0.004
0.018 ±0.004
0.46 ±0.10
(
#1 #8
0.362 ±0.008
MAX
9.20 ±0.20
0.378
9.60
#4 #5
0.100
2.54
5.08 3.30 ±0.30
MAX 0.130 ±0.012
0.200
7.62
0.300 3.40 ±0.20 0.33
MIN
0.134 ±0.008 0.013
+0.10
0.25 –0.05
+0.004
0.010 –0.002
0~15°
4
KA331
Ordering Information
Product Number Package Operating Temperature
KA331 8-DIP 0 ~ + 70°C
5
KA331
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
www.fairchildsemi.com
Authorized Distributor
Fairchild Semiconductor:
KA331