Scribd Logo
Upload

Welcome to Scribd!

  • 185 views

    Jotafix Pu Topcoat PDF

    Uploaded by

    cahyo hutomo
    This document provides information on Jotafix PU Topcoat, a two-component, chemically curing aliphatic acrylic polyurethane coating with a glossy finish. It is intended for use as a topcoat on marine vessels, specifically for decks, superstructures, and topsides. The product has good gloss retention and is a high-solids coating designed to be applied with a brush or roller. It has certifications for low flame spread and meets various international regulations for marine equipment coatings. Application instructions, recommended film thicknesses, and surface preparation guidelines are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Jotafix Pu Topcoat PDF

    Uploaded by

    cahyo hutomo
    185 views2 pages
    This document provides information on Jotafix PU Topcoat, a two-component, chemically curing aliphatic acrylic polyurethane coating with a glossy finish. It is intended for use as a topcoat on marine vessels, specifically for decks, superstructures, and topsides. The product has good gloss retention and is a high-solids coating designed to be applied with a brush or roller. It has certifications for low flame spread and meets various international regulations for marine equipment coatings. Application instructions, recommended film thicknesses, and surface preparation guidelines are also summarized.

    Original Title

    JOTAFIX PU TOPCOAT.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Jotafix PU Topcoat, a two-component, chemically curing aliphatic acrylic polyurethane coating with a glossy finish. It is intended for use as a topcoat on marine vessels, specifically for decks, superstructures, and topsides. The product has good gloss retention and is a high-solids coating designed to be applied with a brush or roller. It has certifications for low flame spread and meets various international regulations for marine equipment coatings. Application instructions, recommended film thicknesses, and surface preparation guidelines are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    185 views2 pages

    Jotafix Pu Topcoat PDF

    Uploaded by

    cahyo hutomo
    This document provides information on Jotafix PU Topcoat, a two-component, chemically curing aliphatic acrylic polyurethane coating with a glossy finish. It is intended for use as a topcoat on marine vessels, specifically for decks, superstructures, and topsides. The product has good gloss retention and is a high-solids coating designed to be applied with a brush or roller. It has certifications for low flame spread and meets various international regulations for marine equipment coatings. Application instructions, recommended film thicknesses, and surface preparation guidelines are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data Sheet

    Approved 36902;36903 2 36902 polyurethane ^(ValidationDate) 1

    Jotafix PU Topcoat

    Product description
    This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with good
    gloss retention. It is a high solids product. To be used as topcoat in atmospheric environments. Specially
    designed for application with brush and roller.

    Typical use
    Marine:
    Recommended for topside, deck and superstructure.
    Other

    Approvals and certificates


    Grain, Newcastle Occupational Health

    When used as part of an approved scheme, this material has the following certification:
    - Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5
    and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
    IMO 2010 FTP Code Ch. 8
    Additional certificates and approvals may be available on request.

    Colours
    according to colour card and Multicolor Industry tinting system (MCI)

    Product data
    Property Test/Standard Description

    Solids by volume ISO 3233 61 ± 2 %


    Gloss level (GU 60 °) ISO 2813 gloss (70-85)
    Flash point ISO 3679 Method 1 28 °C
    Density calculated 1.4 kg/l
    VOC-US/Hong Kong US EPA method 24 (tested) 334 g/l
    (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
    VOC-EU IED (2010/75/EU) (theoretical) 336 g/l
    VOC-China GB/T 23985-2009 (tested) 301 g/l
    VOC-Korea Korea Clean Air Conservation Act (tested) 375 g/l

    The provided data is typical for factory produced products, subject to slight variation depending on colour.
    All data is valid for mixed paint.
    Gloss description: According to Jotun Performance Coatings' definition.

    Date of issue: 6 September 2018 Page: 1/5

    This Technical Data Sheet supersedes those previously issued.


    The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
    Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
    Technical Data Sheet
    Jotafix PU Topcoat

    Film thickness per coat


    Typical recommended specification range

    Dry film thickness 50 - 80 μm


    Wet film thickness 85 - 140 μm
    Theoretical spreading rate 12.2 - 7.6 m²/l

    Surface preparation
    To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
    contamination.

    Surface preparation summary table

    Surface preparation

    Substrate Minimum Recommended

    Coated surfaces Clean, dry and undamaged compatible Clean, dry and undamaged compatible
    coating (ISO 12944-4 6.1.4) coating (ISO 12944-4 6.1.4)

    Application
    Application methods
    The product can be applied by

    Spray: Air spray or airless spray may be used.


    Brush: Recommended. Care must be taken to achieve the specified dry film thickness.
    Roller: Recommended. Care must be taken to achieve the specified dry film thickness.

    Product mixing ratio (by volume)

    Jotafix PU Topcoat Comp A 9 part(s)


    Jotafix PU Topcoat Comp B 1 part(s)

    Thinner/Cleaning solvent
    Thinner: Jotun Thinner No. 10 / Jotun Thinner No. 26

    Guiding data for airless spray


    Nozzle tip (inch/1000): 13-19

    Date of issue: 6 September 2018 Page: 2/5

    This Technical Data Sheet supersedes those previously issued.


    The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
    Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com

    You might also like