Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    TCSESM 10p Managed Switch

    Uploaded by

    Androent
    The document describes a 10-port managed Ethernet switch from ConneXium that supports speeds of 10/100/1000 Mbps. It has models with either all RJ45 ports or a combination of RJ45 and SFP fiber ports. As a managed switch, it provides features like VLANs, QoS, port security, and protocols for redundancy and timing to optimize performance and availability in industrial Ethernet networks.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TCSESM 10p Managed Switch

    Uploaded by

    Androent
    48 views7 pages
    The document describes a 10-port managed Ethernet switch from ConneXium that supports speeds of 10/100/1000 Mbps. It has models with either all RJ45 ports or a combination of RJ45 and SFP fiber ports. As a managed switch, it provides features like VLANs, QoS, port security, and protocols for redundancy and timing to optimize performance and availability in industrial Ethernet networks.

    Original Description:

    TCSESM 10p

    Original Title

    TCSESM 10p managed switch

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a 10-port managed Ethernet switch from ConneXium that supports speeds of 10/100/1000 Mbps. It has models with either all RJ45 ports or a combination of RJ45 and SFP fiber ports. As a managed switch, it provides features like VLANs, QoS, port security, and protocols for redundancy and timing to optimize performance and availability in industrial Ethernet networks.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views7 pages

    TCSESM 10p Managed Switch

    Uploaded by

    Androent
    The document describes a 10-port managed Ethernet switch from ConneXium that supports speeds of 10/100/1000 Mbps. It has models with either all RJ45 ports or a combination of RJ45 and SFP fiber ports. As a managed switch, it provides features like VLANs, QoS, port security, and protocols for redundancy and timing to optimize performance and availability in industrial Ethernet networks.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 7

    ConneXium

    11 U

    Product data sheet

    Managed Ethernet Switch - 10 Ports


    Description
    The ConneXium TCSESM103 family of 10 Port Managed Ethernet Switch supports Ethernet
    10 Mbit/s, Fast Ethernet 100 Mbit/s, and 1000 Mbit/s communications and includes 2 models.
    The Switch model that support all copper cable connections includes 8TX for 10/100 Mbit/s
    and 2TX/Gbit ports using RJ45 Connectors. The second Switch model also includes 8TX
    ports using RJ45 Connectors, and 2 Gbit Fiber Optic ports with SFP sockets. These SFP
    sockets allows the use of plug-in Fiber Optic modules that are available in both Multi Mode
    and Single Mode versions for applications requiring long cable distances or for environments
    with high electrical noise.

    The Managed Switch provides a range of services for management, diagnostics, security,
    performance, timing, and redundancy, allowing the switch operation to be tailored to the
    application. The use of Managed Switches in Industrial Ethernet networks helps to eliminate
    data collisions, increase network performance and availability, provide diagnostic and
    operation information, while simplifying network design in industrial automation applications.

    Features
    > Managed Ethernet Switch with user configured services
    and features

    > RJ45 connectors supporting IEEE 802.3 copper cable


    technology

    > SFP sockets for plug-in Fiber Optic Modules that are
    available in Multi-Mode and Single Mode types (see
    accessory table)

    > Network configurations include line, star, mesh, or ring


    structures

    > Supports the coupling of 2 rings using HIPER-Ring, and


    MRP protocols

    > Configure switches using Web browser, Telnet, or V24


    serial interface

    > Switch configuration backup to plug-in memory adapter,


    servers, or PC

    > High speed Ethernet communication rate – 10/100/1000


    Mb with auto sensing and auto-set for half/full duplex
    ConneXium Managed Ethernet Switches Page 2

    > Built-in 9.6-60 VDC/18-30 VAC Power Supply w/ redundant


    connections

    > Built-in LED Indicators for power and communications

    > Operating temperature range 0° to +60° C

    Models
    The ConneXium TCSESM103 family of Managed Ethernet Switches includes the following models:

    TCSESM103F23G0 10 Port Managed Switch 8TX/2TX-GBIT


    TCSESM103F2LG0 16 Port Managed Switch 8TX/2SFP-GBIT

    Overview
    The ConneXium model TCSESM103 family of Managed Ethernet Switch are layer 2 devices that
    connects Ethernet devices to an Industrial Ethernet network. A description for the capabilities and
    features that are available with the ConneXium Managed Ethernet Switches is provided below.

    Management Features Command Line Interface( CLI) - Switch configuration using


    commands. The interface is accessed via telnet or serial connection to
    a V24 serial port.
    Telnet Server - Used to access the switch to configure it using the CLI
    over an Ethernet connection.
    Web Management - Enables switch configuration and diagnostics
    using a web based interface through a standard web browser.
    Remote Monitoring (RMON) - An industry standard specification
    which supports monitoring and protocol analysis of local area
    networks. Used with a network management station that supports
    RMON probe functionality to monitor data at a switch port.
    Backup - Switch configuration backup to a memory backup adapter
    (EAM), to a server via TFTP, or to a PC.
    DHCP Option 82 - Allows a DHCP server that supports option 82 to
    assign the same IP address to any device connected to a particular
    switch port.

    Diagnostic Features Log Files - HTML file that logs up to 2000 events with time stamp,
    System File, HTML file that contains diagnostic information

    LED Indicators - For power, link/activity, fault detection and


    redundancy manager.
    Alarm Relay - External relay contact that alarms on configured
    switch status, such as power source fault detection, temperature, ring
    redundancy, connection error detection etc.

    SNMP Traps - User can configure switch to send SNMP traps for
    configured switch parameters to a device with Network Management

    Schneider Electric - All Rights Reserved


    April 29, 2010
    ConneXium Managed Ethernet Switches Page 3

    Software that support SNMP Traps.


    Port Mirroring - Copies data passing through one port
    (source) to another port to allow troubleshooting with a network
    protocol analysis tool.
    . IEEE 802.1ab Topology Discovery - Enables the automatic detection
    of devices and network topology mapping.

    Redundancy Features RSTP (Rapid Spanning Tree Protocol) - Industry standard protocol
    (IEEE 802.1) enabling deployment of ring and mesh architectures.

    MRP ( Media Redundancy Protocol) - An IEC standard (IEC


    62439) enabling deployment of ring architectures.

    HIPER-Ring ( High Performance Redundancy) - A propriety protocol


    for ring configurations.

    Ring Coupling – Interconnecting 2 ring that are using either the MRP
    or HIPER-Ring protocols.

    Dual Input Power Supply - Dual connections to the switch power


    Supply.

    Security Features Port Security (IP and MAC address based) – Configuration setting
    that restricts port access to devices with defined IP address or MAC
    addresses.

    SNMP V3 - Allows SNMP password encryption

    Performance Optimization Message Priority - Supports 4 priority queues so that high


    priority data traffic is not disrupted during times with high data traffic.

    Quality of Service (QoS) - Provides different priority levels to


    different applications, users, or data flow, to maintain a certain
    level of performance.

    Port Priority - Data packets with no priority information will be


    transmitted according to the priority of the port.

    Flow Control - Limits traffic during times of high traffic and transmits a
    “Pause” frame to the end device to indicate that the device should stop
    sending data.

    Differentiated Service Code Points ( DSCP) A 6-bit field in the


    header of IP packets to classify and prioritize traffic.

    Fast Aging after Disconnection - All device addresses learned by a


    port are removed from the switch buffer if the link goes down.

    Filtering Traffic Limiter - Used to limit the data rate for different types of
    traffic, such as Broadcast and Multicast packets a switch
    port can receive or transmit. Reduces the harmful effects of data storms
    on the network.

    Schneider Electric - All Rights Reserved


    April 29, 2010
    ConneXium Managed Ethernet Switches Page 4

    Virtual Local Area Networks ( VLAN) – Allows the creation of a


    logical subgroup of devices within a larger network in accordance with
    IEEE 802.1Q. Used to limit broadcasts and increase communication
    security.

    Internet Group Management Protocol (IGMP) Snooping - Multicast


    management protocol that allows the switch to analyze incoming IGMP
    packets and create a multicast list of which ports belong to which multicast
    group. As a result, multicast messages are only sent out ports to
    which devices are connected that need a message.

    Time Protocols Simple Network Time Protocol (SNTP) – Switch timing is


    synchronized to a network master clock.

    Precision Time Protocol (PTP) - IEEE1588 standard for time


    synchronization. Similar to SNTP but more precise.

    EtherNet /IP Adapter Capability - The ability to function as an EtherNet/IP adapter for
    implicit real-time I/O messaging and explicit messaging. Enables PLC access
    to switch diagnostic data.

    Schneider Electric - All Rights Reserved


    April 29, 2010
    ConneXium Managed Ethernet Switches Page 5

    Technical Specifications

    Supply Voltage 24 VDC


    Operating Voltage Range 9.6 to 60 VDC or 18 to 30 VAC
    Hold up time Min 10 ms @ 20.4 VDC
    Power Consumption @ 24 VDC
    TCSESM103F23G0 8.9 Watts Max.
    TCSESM103F2LG0 8.3 Watts Max.
    Module Dimension 74 mm W X 131mm H X 111mm D
    (2.91 X 5.16 X 4.37 in.)
    Weight 410 g (0.9lbs)
    Operating Temperature 0 to 60° C
    Storage Temperature -40 to 85° C
    Relative Humidity 95% non-condensing per IEC/EN60060-2-30Db
    Protection IP 20
    Altitude 2000 m
    Laser Protection Class 1, conforming to EN60825-1
    Shock and Vibration IEC 60068-2-6, IEC 60068-2-27
    EMC Immunity EN 61000-4-2, -3,-4,-5,-6,-9
    Radiated Emissions EN55011A/CISPR11A
    Approvals UL 508 & 1604
    CSA C22.2 No. 14 & No. 213
    CE Certificate

    Conformance RoHS Directive

    LED Indicators Power Present


    Data Rate (10/100Mbit/sec) - 1 per port
    Data Link Status - 1 per port

    MTBF

    TCSESM103F23G0 419,882 hr. at 25°C GB


    TCSESM103F2LG0 466,918 hr. at 25°C GB

    Schneider Electric - All Rights Reserved


    April 29, 2010
    ConneXium Managed Ethernet Switches Page 6

    Accessories
    Cables
    Description Part No. Available Lengths
    (M)
    TF Ethernet SFTP CAT5E RJ45 cables 490NTW000•• 2, 5, 12, 40, 80
    TF Ethernet SFTP CAT5E RJ45 490NTC000•• 5, 15, 40, 80
    crossed cables
    Ethernet M12-RJ45 CE light duty TCSECL1M3M•• 1, 3, 10, 25, 40
    cables
    •• = length in meters

    Fiber Module for SFP Connectors


    Description Part No.Field Side Cable Distance
    Connector
    Fiber Module - TCSEAAF1LFH00 LC 10-70 km with 9/125µn cable
    Single Mode
    Fiber Module - TCSEAAF1LFS00 LC 0-550 m with 50/125µn cable
    Multi Mode 0-550 m with 62.5/125µn cable

    Fiber Module - TCSEAAF1LFS00 LC 0-20 km with 9/125µn cable


    Single Mode
    Fiber Module - TCSEAAF1LFU00 LC 0-550 m with 50/125µn cable
    Multi Mode 0-275 m with 62.5/125µn cable

    Network Architectures
    Managed switches can be deployed in ring architectures to increase the networks ability to recover
    from an inoperable device or cable break. The Connexium managed switches include 3 redundancy
    protocols - RSTP, MRP, and HIPER-Ring,.

    Below are 2 of the network ring architectures that the Connexium Managed Switches currently support.

    Single Ring
    Represents a control network in a single ring
    structure to provide cable redundancy.

    Schneider Electric - All Rights Reserved


    April 29, 2010
    ConneXium Managed Ethernet Switches Page 7

    Dual-Ring/Single Message (Ring


    Coupled)
    Represents a control network in a Dual ring
    structure that provides greater redundancy
    than single ring

    Schneider Electric - All Rights Reserved


    April 29, 2010

    You might also like