Radial Tape

EH CONNECTOR
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10m Ω max.
After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #22
• Applicable PC board thickness: 0.8 to 1.6mm

This, the thinnest, 2.5mm pitch connector, * Compliant with RoHS.

is 8.1mm in height after mounting and * Refer to "General Instruction and Notice when using
3.8mm in width. It is designed to meet the Terminals and Connectors" at the end of this catalog.
demand for the high-density connection of * Contact JST for details.
internal wires to printed circuit boards. It is
compact, highly reliable and low in cost. Standards ––––––––––––––––––––––
• Compact and slim Recognized E60389
• Highly reliable contact
Certified LR20812
• Polarizing guides
• Easy and effective crimping R50082349

Top entry type Side entry type Radial-tape

±
0
.
0
5

±
0
.
0
5

±
0
.
2.5 2.5min 3.8 2.5 2.5min 2.5 0
5 2.5min 4.4
Ø

+0.1 +0.1 +0.1

0.9 0 0.9 0 0.9 0
10.3

8.6
6.5
8.1

6.7min

4.2

2.2min
2.2min

Note: 1. The above figure is the figure viewed from soldering side.
2. Tolerances are non-cumulative: 0.05mm for all centers.
3. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.

Contact
Applicable wire Insulation O.D. Q'ty /
Model No.
mm2 AWG# (mm) reel
SEH-001T-P0.6 0.05~0.33 30~22 1.0~1.9
*SEH-001T-P0.6L 0.13~0.33 26~22 0.9~1.9 9,000
5.7
*SEH-002T-P0.6L 0.05~0.13 30~26 0.9~1.3
2.85 2.05 1.1
*SEH-003T-P0.6L 0.032~0.08 32~28 0.5~1.1 10,000

Material and Finish

2

Phosphor bronze, tin-plated (reflow treatment)

RoHS compliance
1.6 Note: 1. Contact JST for gold-plated products.
2. SEH-00( )T-P0.6L is low-insertion force type contact, for easier
insertion/withdrawal, which would be less resistant to the vibration.
The crimp height is different from the standard contact.
3. *Marked products are not TÜV approved.
4. Contact JST for details.
Applicator
Crimping Applicator Crimping
Contact machine Contact Crimp applicator
Crimp applicator Dies machine Crimping machine Dies
Crimpapplicator withdies with dies
MKS-L MK/SEH-001-06 APLMK SEH001-06 MKS-L MK/SEH-002-06L APLMK SEH002-06L
SEH-001T-P0.6 SEH-002T-P0.6L
*MKS-SC SC/SEH-001-06 APLSC SEH001-06 - - -
AP-K2N AP-K2N
MKS-L MK/SEH-001-06L APLMK SEH001-06L MKS-L-10 MK/SEH-003-06L APLMK SEH003-06L
SEH-001T-P0.6L SEH-003T-P0.6L
*MKS-SC SC/SEH-001-06L APLSC SEH001-06L *MKS-SC-10 SC/SEH-003-06L APLSC SEH003-06L
Note: *Strip-crimp applicator

TS S C0 19.01(EH) 1
EH CONNECTOR

Housing
Dimensions (mm) Q'ty /
Circuits Model No.
A B bag
2 EHR-2 2.5 7.0 1,000
3 EHR-3 5.0 9.5 1,000
B 4 EHR-4 7.5 12.0 1,000
A 5 EHR-5 10.0 14.5 1,000
(2.25) (2.5)
6 EHR-6 12.5 17.0 1,000
3.8
7 15.0 19.5 1,000
0.6
EHR-7
8 EHR-8 17.5 22.0 1,000
9 EHR-9 20.0 24.5 1,000
2 3 6 7 10 EHR-10 22.5 27.0 1,000
H JST

11 EHR-11 25.0 29.5 1,000

6.5

12 EHR-12 27.5 32.0 1,000

13 EHR-13 30.0 34.5 1,000
14 EHR-14 32.5 37.0 1,000
15 EHR-15 35.0 39.5 1,000
0.7
Circuit No.1
Material
PA 66, UL94V-0, natural (white)
RoHS compliance
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact
ex. EHR-2-oo-
(blank)…natural (white)
K…black R…red TR…tomato red E…blue Y…yellow
L…lemon yellow M…green O…orange N…brown
PL…purple PK…pink H…gray LE…light blue FY…vivid yellow

Shrouded header
The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors.
Model No. Dimensions (mm) Q'ty / box
Top entry type Circuits Top entry Side entry Top entry Side entry
(2 circuits) type type A B type type
B 3.8
2 B2B-EH-A S2B-EH 2.5 7.5 1,000 1,000
3 B3B-EH-A S3B-EH 5.0 10.0 1,000 1,000
3.3

4 B4B-EH-A S4B-EH 7.5 12.5 1,000 1,000

6

5 B5B-EH-A S5B-EH 10.0 15.0 1,000 1,000

6 B6B-EH-A S6B-EH 12.5 17.5 1,000 500
3.2

7 B7B-EH-A S7B-EH 15.0 20.0 1,000 500

8 B8B-EH-A S8B-EH 17.5 22.5 500 500
0.64
Circuit No.1 (2.5) A (1.6) 9 B9B-EH-A S9B-EH 20.0 25.0 500 500
10 B10B-EH-A S10B-EH 22.5 27.5 500 500
11 B11B-EH-A S11B-EH 25.0 30.0 500 250
(3 to 15 circuits) 250
3.8 12 B12B-EH-A S12B-EH 27.5 32.5 500
13 B13B-EH-A S13B-EH 30.0 35.0 250 250
14 B14B-EH-A S14B-EH 32.5 37.5 250 250
3.3

5.1
6

15 B15B-EH-A S15B-EH 35.0 40.0 250 250

Material and Finish

3.2

Post: Brass, copper-undercoated, tin-plated (reflow treatment)

Wafer: PA 66, UL94V-0, natural (white)
2.5 0.64

Circuit No.1 (2.5) A (1.6) RoHS compliance This product displays (LF)(SN) on a label.
Note: Also available and identified as model BxxB-EH is a top entry type having
B
a post extension length of 4.0mm
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
Side entry type 4.2
For availability, delivery and minimum order quantity, contact JST.
<Top entry type>
ex. B2B-EH-A-oo-
(blank)…natural (white)
4

6.7
5.2

K…black R…red E…blue Y…yellow M…green

<Side entry type>
2.2

ex. S2B-EH-oo-
(2.5) 0.64 3.2
(blank)…natural (white)
Circuit No.1 (2.5) A K…black R…red TR…tomato red E…blue Y…yellow
B
L…lemon yellow M…green O…orange N…brown
P…purple PK…pink H…gray LE…light blue FY…vivid yellow

2 TS S C0 19.0 1(EH )
 EH CONNECTOR

Shrouded header on radial-tape

Model No. Dimensions (mm) Q'ty /
TS type 7.5 4.4 Circuits
TS type TV4 type A B box
(2 circuits) 2.5 2.2
2 B2B-EH-TS - - - 1,400
3 B3B-EH-TS B3B-EH-TV4 5.0 10.0 1,400
6.5

5.4
4 B4B-EH-TS B4B-EH-TV4 7.5 12.5 700
5 B5B-EH-TS B5B-EH-TV4 10.0 15.0 700
(1)

Ø
1.5

0.64 6 B6B-EH-TS B6B-EH-TV4 12.5 700

17.5
7 B7B-EH-TS B7B-EH-TV4 15.0 20.0 700
8 B8B-EH-TS B8B-EH-TV4 17.5 22.5 700

Material and Finish

Pin/Post: Brass, copper-undercoated, tin-plated (reflow treatment)
Wafer: PA 66, UL94V-0, natural (white)

RoHS compliance This product displays (LF)(SN) on a label.

(3 to 8 circuits)
B <For reference> As the color identification,
A 2.5 4.4 the following alphabet shall be put in the underlined part.
Ø

2.5 0.64 2.2 For availability, delivery and minimum order quantity, contact
ex. B2B-EH-TS-oo-
6.5

5.6
1.5
(1)

(blank)…natural (white)
K…black R…red E…blue Y…yellow M…green N…brown
Ø

0.64
1.5

Taping specifications
2 and 3 circuits: 12.7
4 to 8 circuits: 25.4

TV4 type
B
A 2.5 4.4
20

2.5 0.64 2.2

6
9
6.5

5.6

18
(

Ø
Ø

0.7) 4
2.8

(
Ø

0.7)
2 circuits: 5.1 2 circuits: 2.5
3 to 8 circuits: 3.85 3 to 8 circuits: 5

12.7

Note: Conforms to JIC C 0806 of "Tape packaging of components with

unidirectional leads on continuous tapes".

Packaging specifications
Package type Flat pack (zigzag folded)
D
Distance between folds 24 indexing holes per fold (304.8mm)
Box size 316(W)X45(D)X330(H)mm
Distance between the end of the tape and
19.05mm
the first connector’s center line (either end)
H 2, 3 circuits 1,400 pcs. /box
Quantity
4~8 circuits 700 pcs. /box
Note: Products of different packaging specifications are also available.
Contact JST for details.
W

Distance between the end of the tape and

the first connector's center line (either end)

Tail tape Leader tape

TS S C0 19.01(EH) 3
EH CONNECTOR

Unit for wire-to-wire connection

Dimensions (mm) Q'ty /
Circuits Model No.
A B box
2 B2B-EH-A-TW 2.5 7.5 24,000
3 B3B-EH-A-TW 5.0 10.0 24,000
4 B4B-EH-A-TW 7.5 12.5 18,000
6 B6B-EH-A-TW 12.5 17.5 9,000
B
Material and Finish
Pin/Post: Brass, copper-undercoated, tin-plated (reflow treatment)
1.45 A Wafer: PA 66, UL94V-0, natural (white)
2.5
▭ 6.4 3.8
RoHS compliance This product displays (LF)(SN) on a label.

3.4
5.1

1.5
9.9
12

4 TS S C0 19.0 1(EH )