Interim Revision Announcement

Official May 1, 2018 Naproxen 1

rU = peak response of naproxen from the Sample

Naproxen Sodium Tablets solution
rS = peak response of naproxen from the Standard
solution
DEFINITION CS = concentration of USP Naproxen Sodium RS in
Naproxen Sodium Tablets contain NLT 90.0% and NMT the Standard solution (mg/mL)
110.0% of the labeled amount of naproxen sodium CU = nominal concentration of naproxen sodium in
(C14H13NaO3). the Sample solution (mg/mL)
IDENTIFICATION Acceptance criteria: 90.0%–110.0%
• A. IDENTIFICATION TESTS—GENERAL 〈191〉, Chemical Identifi- PERFORMANCE TESTS
cation Tests, Sodium • DISSOLUTION 〈711〉
Sample: Transfer an amount nominally equivalent to Buffer: 0.1 M of a phosphate buffer with a pH of 7.4,
about 250 mg of naproxen sodium from finely pow- containing 2.62 g/L of monobasic sodium phosphate
dered Tablets to a centrifuge tube. Add 12 mL of water and 11.50 g/L of anhydrous dibasic sodium phosphate
and 1 mL of hydrochloric acid. A dense white precipi- in water
tate is formed. Centrifuge the mixture. Use the clear Medium: Buffer; 900 mL
supernatant for the test. Apparatus 2: 50 rpm
Acceptance criteria: Meets the requirements Time: 45 min
• B. The retention time of the major peak of the Sample Standard solution: 50 µg/mL of USP Naproxen So-
solution corresponds to that of the Standard solution, as dium RS in Medium
obtained in the Assay. Sample solution: Dilute a filtered portion of the solu-
• C. The UV absorption spectra of the major peak of the tion under test with Medium as necessary to obtain a
Sample solution and that of the Standard solution exhibit nominal concentration of 50 µg/mL of naproxen so-
maxima and minima at the same wavelengths, as ob- dium (C14H13NaO3).
tained in the Assay. Instrumental conditions
ASSAY Mode: UV
Analytical wavelength: About 332 nm (maximum
absorbance)
Change to read: Analysis
Samples: Standard solution and Sample solution
• PROCEDURE Calculate the percentage of the labeled amount of
Mobile phase: Acetonitrile, water, and glacial acetic naproxen sodium (C14H13NaO3) dissolved.
acid (450:540:10) Tolerances: NLT 80% (Q) of the labeled amount of
Standard solution: 0.1 mg/mL of USP Naproxen So- naproxen sodium (C14H13NaO3) is dissolved.
dium RS in Mobile phase • UNIFORMITY OF DOSAGE UNITS 〈905〉: Meet the
•Sample stock solution: Nominally 1.0 mg/mL of
. requirements
naproxen sodium from Tablets prepared as follows.
Transfer an appropriate amount of naproxen sodium IMPURITIES
from NLT 20 Tablets, finely powdered, to a suitable
volumetric flask. Add 15% of the volume of water and Change to read:
sonicate for 5 min. Add 50% of the volume of Mobile
phase and sonicate for an additional 30 min, shaking • ORGANIC IMPURITIES
intermittently. Allow the solution to cool to room tem- Solution A: Dissolve 1.36 g of monobasic potassium
perature and then dilute with Mobile phase to volume. phosphate in 1 L of water. Adjust with triethylamine to
Centrifuge or pass a portion of this solution through a a pH of 6.5. Pass through a suitable filter of 0.45-µm
suitable filter.• (IRA 1-May-2018) pore size.
Sample solution: Nominally equivalent to 0.1 mg/mL Solution B: Acetonitrile
of naproxen sodium in Mobile phase from Sample stock Diluent: Acetonitrile and Solution A (50:50)
solution Mobile phase: See Table 1.
Chromatographic system
(See Chromatography 〈621〉, System Suitability.)
Mode: LC Table 1
Detector: UV 254 nm, diode array Time Solution A Solution B
Column: 4.6-mm × 15-cm; 5-µm packing L7 (min) (%) (%)
Flow rate: 1.2 mL/min 0 85 15
Injection volume: 20 µL
5 85 15
Run time: NLT 2 times the retention time of
naproxen 25 60 40
System suitability 45 50 50
Sample: Standard solution 50 85 15
Suitability requirements 60 85 15
Tailing factor: NMT 2.0
Relative standard deviation: NMT 2.0% Standard stock solution 1: •0.05 mg/mL• (IRA 1-May-2018)
of USP Naproxen Sodium RS in Diluent •• (IRA 1-May-2018)
.

Analysis .

Samples: Standard solution and Sample solution Standard stock solution 2: 0.01 mg/mL of USP
Calculate the percentage of the labeled amount of Naproxen Related Compound A RS in methanol
naproxen sodium (C14H13NaO3) in the portion of Tab- Standard stock solution 3: 0.01 mg/mL of USP
lets taken: Naproxen Related Compound L RS in methanol
System suitability solution: 0.5 mg/mL of USP
Result = (rU/rS) × (CS/CU) × 100 Naproxen Sodium RS and 0.5 µg/mL of USP Naproxen
Related Compound A RS in Diluent, from Standard

2017 The United States Pharmacopeial Convention All Rights Reserved.

 Interim Revision Announcement
2 Naproxen Official May 1, 2018

stock solution 1 and Standard stock solution 2, Calculate the percentage of naproxen methyl ester and
respectively any individual unspecified degradation product in the
Standard solution: 1.0 µg/mL of USP Naproxen So- portion of Tablets taken:
dium RS, and 0.5 µg/mL each of USP Naproxen Re-
lated Compound A RS and USP Naproxen Related •Result = (rU/rS) × (CS/CU) × 100• (IRA 1-May-2018)
.

Compound L RS in Diluent, from Standard stock solution

1, Standard stock solution 2, and Standard stock solution rU = peak response of naproxen methyl ester or
3, respectively any individual unspecified degradation
•Sample stock solution: Nominally 1.0 mg/mL of product from the Sample solution
rS = peak response of naproxen from the Standard
.

naproxen sodium from Tablets prepared as follows.

Transfer an appropriate amount of naproxen sodium solution
from NLT 20 Tablets, finely powdered, to a suitable CS = concentration of USP Naproxen Sodium RS in
volumetric flask. Add 15% of the volume of water and the Standard solution (mg/mL)
sonicate for 5 min. Add 50% of the volume of Mobile CU = nominal concentration of naproxen sodium in
phase described in the Assay and sonicate for an addi- the Sample solution (mg/mL)
tional 30 min, shaking intermittently. Allow the solu- •• (IRA 1-May-2018)
.

tion to cool to room temperature and then dilute with Acceptance criteria: See Table 2. Disregard any peaks
Mobile phase described in the Assay to volume. Centri- below LOQ (0.004% for naproxen methyl ester and
fuge or pass a portion of this solution through a suita- any individual unspecified degradation product,
ble filter.• (IRA 1-May-2018) 0.002% for naproxen related compound A, and
Sample solution: Nominally equivalent to 0.55 mg/mL 0.006% for naproxen related compound L).
of naproxen sodium in Diluent from the Sample stock
solution Table 2
Chromatographic system
Relative Acceptance
(See Chromatography 〈621〉, System Suitability.)
Mode: LC
Retention •• .

(IRA 1-
Criteria,
Name Time NMT (%)
Detector: UV 236 nm May-2018)

Column: 4.6-mm × 15-cm; 5-µm packing L7 Naproxen related ••

.

(IRA 1-

Column temperature: 40° compound Aa 0.63 May-2018) 0.2

••
.

Flow rate: 1.0 mL/min .

(IRA 1-
—
Injection volume: 10 µL Naproxen 1.00 May-2018)

System suitability Naproxen related ••

.

(IRA 1-
Samples: System suitability solution and Standard compound Lb 2.32 May-2018) 0.2
••
.

solution Naproxen methyl (IRA 1-

Suitability requirements
.

esterc 3.19 May-2018) 0.2

Resolution: NLT 6.0 between naproxen related com-
.

Any individual
pound A and naproxen, System suitability solution unspecified — •• (IRA 1-
Relative standard deviation: NMT 5.0% for
.

degradation product May-2018) 0.2

naproxen, naproxen related compound A, and •• (IRA 1-
naproxen related compound L, Standard solution —
.

Total impurities May-2018) 1.5

Analysis a 6-Methoxy-2-naphthoic acid.
Samples: Standard solution and Sample solution
.

b 1-(6-Methoxynaphthalen-2-yl)ethanone.
Calculate the percentage of naproxen related com-
.

c (S)-Methyl 2-(6-methoxynaphthalen-2-yl)propanoate.
pound A and naproxen related compound L in the
.

portion of Tablets taken: ADDITIONAL REQUIREMENTS

• PACKAGING AND STORAGE: Preserve in well-closed
Result = (rU/rS) × (CS/CU) × 100 containers.
• USP REFERENCE STANDARDS 〈11〉
rU = peak response of naproxen related compound USP Naproxen Sodium RS
A or naproxen related compound L from the USP Naproxen Related Compound A RS
Sample solution 6-Methoxy-2-naphthoic acid.
rS = peak response of naproxen related compound C12H10O3 202.21
A or naproxen related compound L from the USP Naproxen Related Compound L RS
Standard solution 1-(6-Methoxynaphthalen-2-yl)ethanone.
CS = concentration of USP Naproxen Related C13H12O2 200.23
Compound A RS or USP Naproxen Related
Compound L RS in the Standard solution
(mg/mL)
CU = nominal concentration of naproxen sodium in
the Sample solution (mg/mL)

2017 The United States Pharmacopeial Convention All Rights Reserved.