**********************************************************

Welcome to XBeach

version 1.23.5526 XBeachX release

date09-11-2018 11:14:26
URL:http://svn.oss.deltares.nl/repos/xbeach/trunk/
**********************************************************

Simulation started: YYYYMMDD hh:mm:ss time zone (UTC)

20230310 10:35:25 +0100

General Input Module

Reading input parameters:
XBeach reading fromparams.txt
--------------------------------
Backward compatibility:
instat =jons
--------------------------------
Physical processes:
wavemodel =surfbeat
cyclic =0 (no record found, default value used)
swave =1 (no record found, default value used)
single_dir =0 (no record found, default value used)
lwave =1 (no record found, default value used)
flow =1 (no record found, default value used)
sedtrans =1 (no record found, default value used)
morphology =1 (no record found, default value used)
avalanching =1 (no record found, default value used)
gwflow =0 (no record found, default value used)
ships =0 (no record found, default value used)
vegetation =0 (no record found, default value used)
setbathy =0 (no record found, default value used)
viscosity =1 (no record found, default value used)
advection =1 (no record found, default value used)
wind =1 (no record found, default value used)
--------------------------------
Grid parameters:
gridform =delft3d
depfile =bed.dep
xyfile =xy.grd
xori =.0000 (no record found, default value used)
yori =.0000 (no record found, default value used)
alfa =26.0000
posdwn =1.0000
nz =1 (no record found, default value used)
thetamin =-80.0000
thetamax =80.0000
thetanaut =0 (no record found, default value used)
dtheta =20.0000
--------------------------------
Model time parameters:
CFL =.7000 (no record found, default value used)
dtset =.0000 (no record found, default value used)
tstop =16200.0000
maxdtfac =50.0000 (no record found, default value used)
--------------------------------
Physical constants:
rho =1025.0000 (no record found, default value used)
g =9.8100 (no record found, default value used)
 depthscale =1.0000 (no record found, default value used)
--------------------------------
Initial conditions:
zsinitfile = None specified
--------------------------------
Wave boundary condition parameters:
wbctype =parametric
bcfile =jonswap.txt
taper =100.0000 (no record found, default value used)
nmax =.8000 (no record found, default value used)
lateralwave =neumann (no record found, default value used)
--------------------------------
Wave-spectrum boundary condition parameters:
random =0
fcutoff =.0000 (no record found, default value used)
trepfac =.0100 (no record found, default value used)
sprdthr =.0800 (no record found, default value used)
Tm01switch =0 (no record found, default value used)
rt =16200.0000 Warning: value > recommended value of7200
.0000
dtbc =1.0000
nspectrumloc =1 (no record found, default value used)
--------------------------------
Flow boundary condition parameters:
front =abs_2d
left =neumann (no record found, default value used)
right =neumann (no record found, default value used)
back =abs_2d
ARC =1 (no record found, default value used)
order =2.0000 (no record found, default value used)
highcomp =0 (no record found, default value used)
freewave =0 (no record found, default value used)
epsi =-1.0000 (no record found, default value used)
tidetype =velocity (no record found, default value used)
--------------------------------
Tide boundary conditions:
tideloc =2
paulrevere =land (no record found, default value used)
zs0file =tide.txt
--------------------------------
Discharge boundary conditions:
disch_loc_file = None specified
disch_timeseries_file = None specified
ndischarge =0 (no record found, default value used)
ntdischarge =0 (no record found, default value used)
beta =.1000 (no record found, default value used)
--------------------------------
Wave breaking parameters:
break =roelvink2 (no record found, default value used)
gamma =.5500 (no record found, default value used)
gammax =2.0000 (no record found, default value used)
alpha =1.0000 (no record found, default value used)
n =10.0000 (no record found, default value used)
delta =.0000 (no record found, default value used)
fw =.0300
fwfile = None specified
fwcutoff =1000.0000 (no record found, default value used)
breakerdelay =1.0000 (no record found, default value used)
--------------------------------
 Roller parameters:
roller =1 (no record found, default value used)
rfb =0 (no record found, default value used)
--------------------------------
Wave-current interaction parameters:
wci =0
hwci =.1000 (no record found, default value used)
hwcimax =100.0000 (no record found, default value used)
cats =4.0000 (no record found, default value used)
--------------------------------
Flow parameters:
bedfriction =chezy (no record found, default value used)
bedfricfile = None specified
bedfriccoef =55.0000 (no record found, default value used)
droot =.5000 (no record found, default value used)
dstem =.5000 (no record found, default value used)
maxcf =.0400 (no record found, default value used)
nuh =.1000 (no record found, default value used)
nuhfac =1.0000 (no record found, default value used)
smag =1 (no record found, default value used)
--------------------------------
Coriolis force parameters:
wearth =.0417 (no record found, default value used)
lat =.0000 (no record found, default value used)
--------------------------------
Wind parameters:
rhoa =1.2500 (no record found, default value used)
Cd =.0020 (no record found, default value used)
windfile = None specified
windv =.0000 (no record found, default value used)
windth =270.0000 (no record found, default value used)
--------------------------------
Sediment transport parameters:
form =vanthiel_vanrijn (no record found, default value use
d)
waveform =vanthiel (no record found, default value used)
sws =1 (no record found, default value used)
lws =1 (no record found, default value used)
BRfac =1.0000 (no record found, default value used)
facua =.1000 (no record found, default value used)
facSk =.1000 (no record found, default value used)
facAs =.1000 (no record found, default value used)
Tbfac =1.0000 (no record found, default value used)
turb =bore_averaged (no record found, default value used)
turbadv =none (no record found, default value used)
sus =1 (no record found, default value used)
bed =1 (no record found, default value used)
bulk =0 (no record found, default value used)
facsl =.1500 (no record found, default value used)
z0 =.0060 (no record found, default value used)
smax =-1.0000 (no record found, default value used)
bdslpeffmag =roelvink_total (no record found, default value used)
bdslpeffini =none (no record found, default value used)
bdslpeffdir =none (no record found, default value used)
reposeangle =30.0000 (no record found, default value used)
tsfac =.1000 (no record found, default value used)
Tsmin =.5000 (no record found, default value used)
facDc =1.0000 (no record found, default value used)
lwt =0 (no record found, default value used)
 betad =1.0000 (no record found, default value used)
fallvelred =0 (no record found, default value used)
dilatancy =0 (no record found, default value used)
--------------------------------
Bed composition parameters:
ngd =1 (no record found, default value used)
nd =3 (no record found, default value used)
por =.4000 (no record found, default value used)
D50 =.0004
D90 =.0005
rhos =2650.0000 (no record found, default value used)
dzg =.1000 (no record found, default value used)
dzg1 =.1000 (no record found, default value used)
dzg2 =.1000 (no record found, default value used)
dzg3 =.1000 (no record found, default value used)
sedcal =1.0000 (no record found, default value used)
ucrcal =1.0000 (no record found, default value used)
--------------------------------
Morphology parameters:
morfac =10.0000
morfacopt =1 (no record found, default value used)
morstart =.0000 (no record found, default value used)
morstop =16200.0000 (no record found, default value used)
wetslp =.1500
dryslp =1.0000
hswitch =.1000 (no record found, default value used)
dzmax =.0500 (no record found, default value used)
struct =1
ne_layer =reef.dep
--------------------------------
Output variables:
timings =1 (no record found, default value used)
tunits = None specified
tstart =.0000
tint =1.0000 (no record found, default value used)
tsglobal = None specified
tintg =120.0000
tspoints = None specified
tintp =1.0000 (no record found, default value used)
tsmean = None specified
tintm =16200.0000
nglobalvar =13
nglobalvar: Will generate global output for variable:zb
nglobalvar: Will generate global output for variable:zs
nglobalvar: Will generate global output for variable:u
nglobalvar: Will generate global output for variable:v
nglobalvar: Will generate global output for variable:H
nglobalvar: Will generate global output for variable:Fx
nglobalvar: Will generate global output for variable:Fy
nglobalvar: Will generate global output for variable:ceqsg
nglobalvar: Will generate global output for variable:ccg
nglobalvar: Will generate global output for variable:Susg
nglobalvar: Will generate global output for variable:Svsg
nglobalvar: Will generate global output for variable:sedero
nglobalvar: Will generate global output for variable:dzav
npoints =0 (no record found, default value used)
nrugauge =0 (no record found, default value used)
npointvar =0 (no record found, default value used)
nrugdepth =1 (no record found, default value used)
 rugdepth =.0000 (no record found, default value used)
nmeanvar =8
nmeanvar: Will generate mean, min, max and variance output for variable:zs
nmeanvar: Will generate mean, min, max and variance output for variable:u
nmeanvar: Will generate mean, min, max and variance output for variable:v
nmeanvar: Will generate mean, min, max and variance output for variable:H
nmeanvar: Will generate mean, min, max and variance output for variable:ceqsg
nmeanvar: Will generate mean, min, max and variance output for variable:ccg
nmeanvar: Will generate mean, min, max and variance output for variable:Susg
nmeanvar: Will generate mean, min, max and variance output for variable:Svsg
outputformat =netcdf
outputprecision =double (no record found, default value used)
ncfilename = None specified
netcdf output to:xboutput.nc
remdryoutput =1 (no record found, default value used)
--------------------------------
Output projection:
projection = None specified
rotate =1 (no record found, default value used)
--------------------------------
Wave numerics parameters:
scheme =warmbeam (no record found, default value used)
snells =0 (no record found, default value used)
--------------------------------
Flow numerics parameters:
eps =.0050 (no record found, default value used)
eps_sd =.5000 (no record found, default value used)
umin =.0000 (no record found, default value used)
hmin =.2000 (no record found, default value used)
secorder =0 (no record found, default value used)
--------------------------------
Sediment transport numerics parameters:
thetanum =1.0000 (no record found, default value used)
cmax =.1000 (no record found, default value used)
--------------------------------
Bed update numerics parameters:
frac_dz =.7000 (no record found, default value used)
nd_var =2 (no record found, default value used)
split =1.0100 (no record found, default value used)
merge =.0100 (no record found, default value used)
--------------------------------
Finished reading input parameters
--------------------------------
Unknown, unused or multiple statements of parameterC inparams.txt
------------------------------------
Building Grid and Bathymetry
------------------------------------
Initializing .....
readtide: reading tide time series fromtide.txt ...
--------------------------------
Initializing spectral wave boundary conditions
--------------------------------
NetCDF outputformat
Creating netcdf variable:zb
Creating netcdf variable:zs
Creating netcdf variable:u
Creating netcdf variable:v
Creating netcdf variable:H
Creating netcdf variable:Fx
 Creating netcdf variable:Fy
Creating netcdf variable:ceqsg
Creating netcdf variable:ccg
Creating netcdf variable:Susg
Creating netcdf variable:Svsg
Creating netcdf variable:sedero
Creating netcdf variable:dzav
Creating netcdf variable:zs_mean
Creating netcdf variable:zs_var
Creating netcdf variable:zs_min
Creating netcdf variable:zs_max
Creating netcdf variable:u_mean
Creating netcdf variable:u_var
Creating netcdf variable:u_min
Creating netcdf variable:u_max
Creating netcdf variable:v_mean
Creating netcdf variable:v_var
Creating netcdf variable:v_min
Creating netcdf variable:v_max
Creating netcdf variable:H_mean
Creating netcdf variable:H_var
Creating netcdf variable:H_min
Creating netcdf variable:H_max
Creating netcdf variable:ceqsg_mean
Creating netcdf variable:ceqsg_var
Creating netcdf variable:ceqsg_min
Creating netcdf variable:ceqsg_max
Creating netcdf variable:ccg_mean
Creating netcdf variable:ccg_var
Creating netcdf variable:ccg_min
Creating netcdf variable:ccg_max
Creating netcdf variable:Susg_mean
Creating netcdf variable:Susg_var
Creating netcdf variable:Susg_min
Creating netcdf variable:Susg_max
Creating netcdf variable:Svsg_mean
Creating netcdf variable:Svsg_var
Creating netcdf variable:Svsg_min
Creating netcdf variable:Svsg_max
Writing file definition.
Setting up boundary conditions
--------------------------------
Calculating spectral wave boundary conditions
--------------------------------
Reading spectrum at location1
waveparams: Reading from:jonswap.txt ...
XBeach reading fromjonswap.txt
nmodal =1 (no record found, default value used)
Hm0 =4.0000
fp =.0667
gammajsp =3.3000
s =20.0000
tma =0 (no record found, default value used)
mainang =220.0000
fnyq =1.0000
dfj =.0050 (no record found, default value used)
Interpreting spectrum at location1
Values calculated from interpolated spectrum:
Hm0 =4.00 m
 Trep =13.72 s
Mean dir =220.43 degN
Overall Trep from all spectra calculated:13.72 s
Calculating Fourier components
5.0% done
10.0% done
15.0% done
20.0% done
25.0% done
30.0% done
35.0% done
40.0% done
45.0% done
50.0% done
55.0% done
60.0% done
65.0% done
70.0% done
75.0% done
80.0% done
85.0% done
90.0% done
95.0% done
100.0% done
Wave energy outside computational domain at offshore boundary:.0%
Calculating short wave time series for theta bin1 of8
Calculating short wave time series for theta bin2 of8
Calculating short wave time series for theta bin3 of8
Calculating short wave time series for theta bin4 of8
Calculating short wave time series for theta bin5 of8
Calculating short wave time series for theta bin6 of8
Calculating short wave time series for theta bin7 of8
Calculating short wave time series for theta bin8 of8
Calculating wave energy envelope at boundary.
5.1% done
10.2% done
15.3% done
20.4% done
25.5% done
30.7% done
35.0% done
40.1% done
45.3% done
50.4% done
55.5% done
60.6% done
65.7% done
70.1% done
75.2% done
80.3% done
85.4% done
90.5% done
95.6% done
100.0% done
Wave bin1 contains.00% of total energy
Wave bin2 contains.00% of total energy
Wave bin3 contains.83% of total energy
Wave bin4 contains9.19% of total energy
Wave bin5 contains34.11% of total energy
Wave bin6 contains35.20% of total energy
Wave bin7 contains19.03% of total energy
Wave bin8 contains1.63% of total energy
Writing wave energy toE_reuse.bcf ...
file done
Calculating primary wave interaction
5.0% done
10.1% done
15.1% done
20.1% done
25.1% done
30.2% done
35.2% done
40.2% done
45.2% done
50.3% done
55.3% done
60.3% done
65.3% done
70.4% done
75.4% done
80.4% done
85.4% done
90.5% done
95.5% done
100.0% done
Warning: shallow water so long wave variance is reduced using par%nmax
Calculating flux at boundary
5.1% done
10.2% done
15.3% done
20.4% done
25.5% done
30.7% done
35.0% done
40.1% done
45.3% done
50.4% done
55.5% done
60.6% done
65.7% done
70.1% done
75.2% done
80.3% done
85.4% done
90.5% done
95.6% done
100.0% done
Writing long wave mass flux toq_reuse.bcf ...
file done
--------------------------------
Spectral wave boundary conditions complete
--------------------------------
Boundary conditions complete, starting computation
Simulation 1.0 percent complete. Average dt 0.364 seconds
Time remaining 8 minutes and 11 seconds
Simulation 4.5 percent complete. Average dt 0.352 seconds
Time remaining 2 minutes and 53 seconds
Simulation 7.9 percent complete. Average dt 0.339 seconds
Time remaining 2 minutes and 35 seconds
Simulation 11.3 percent complete. Average dt 0.340 seconds
Time remaining 2 minutes and 25 seconds
Simulation 14.7 percent complete. Average dt 0.343 seconds
Time remaining 2 minutes and 16 seconds
Simulation 18.0 percent complete. Average dt 0.336 seconds
Time remaining 2 minutes and 11 seconds
Simulation 21.2 percent complete. Average dt 0.335 seconds
Time remaining 2 minutes and 7 seconds
Simulation 24.6 percent complete. Average dt 0.340 seconds
Time remaining 1 minutes and 58 seconds
Simulation 27.8 percent complete. Average dt 0.333 seconds
Time remaining 1 minutes and 54 seconds
Simulation 31.1 percent complete. Average dt 0.338 seconds
Time remaining 1 minutes and 48 seconds
Simulation 34.5 percent complete. Average dt 0.337 seconds
Time remaining 1 minutes and 41 seconds
Simulation 37.9 percent complete. Average dt 0.343 seconds
Time remaining 1 minutes and 35 seconds
Simulation 41.2 percent complete. Average dt 0.335 seconds
Time remaining 1 minutes and 32 seconds
Simulation 44.5 percent complete. Average dt 0.338 seconds
Time remaining 1 minutes and 26 seconds
Simulation 47.8 percent complete. Average dt 0.333 seconds
Time remaining 1 minutes and 20 seconds
Simulation 51.1 percent complete. Average dt 0.333 seconds
Time remaining 1 minutes and 16 seconds
Simulation 54.2 percent complete. Average dt 0.327 seconds
Time remaining 1 minutes and 13 seconds
Simulation 57.3 percent complete. Average dt 0.324 seconds
Time remaining 1 minutes and 8 seconds
Simulation 60.4 percent complete. Average dt 0.330 seconds
Time remaining 1 minutes and 3 seconds
Simulation 63.7 percent complete. Average dt 0.333 seconds
Time remaining 56 seconds
Simulation 66.9 percent complete. Average dt 0.324 seconds
Time remaining 52 seconds
Simulation 70.3 percent complete. Average dt 0.329 seconds
Time remaining 46 seconds
Simulation 73.5 percent complete. Average dt 0.328 seconds
Time remaining 41 seconds
Simulation 76.8 percent complete. Average dt 0.325 seconds
Time remaining 36 seconds
Simulation 80.0 percent complete. Average dt 0.326 seconds
Time remaining 31 seconds
Simulation 83.3 percent complete. Average dt 0.328 seconds
Time remaining 26 seconds
Simulation 86.6 percent complete. Average dt 0.330 seconds
Time remaining 20 seconds
Simulation 89.9 percent complete. Average dt 0.329 seconds
Time remaining 16 seconds
Simulation 93.3 percent complete. Average dt 0.331 seconds
Time remaining 10 seconds
Simulation 96.5 percent complete. Average dt 0.329 seconds
Time remaining 6 seconds
Simulation 99.6 percent complete. Average dt 0.327 seconds
Time remaining 1 seconds
Duration : 156.250000000000 seconds
Timesteps : 4858
 Average dt : 0.333470564018114 seconds
Unit speed : 3.611840735044841E-006 seconds/1
End of program xbeach