Hydraulic Microdrilling Rig

SM-6

_SM-6-2017.indd 3 12/04/17 17:21

 SM-6 Hydraulic Microdrilling Rig
APPLICATIONS

stroke 1400 mm stroke 1900 mm stroke 3400 mm stroke 2400 mm

990

990
2000
990

1000
990

500

5770

4770
4270
3770

2600

1850
+290
-140
180

max 1810
min 1270
max 5290 min 4750

Hoist & Feed system Motoreducer

Feed stroke 1400 mm 55.1 in 1900 mm 74.8 in 2400 mm 94.5 in 3400 mm 133.9 in
Rod length type (c/w one rotary head) 1,0 m 3.3 ft 1,5 m 4.9 ft 2m 6.6 ft 3m 9.8 ft
Maximum hoist pull/feed force 52 / 52 kN 11690 / 11690 lbf 52 / 52 kN 11690 / 11690 lbf 52 / 52 kN 11690 / 11690 lbf 52 / 52 kN 11690 / 11690 lbf

Rotary head range HR6F HR7G HR9F HT1700 HT3400

Gear ratio / Type 2/Hydraulic 2/Hydraulic 6/Manual 6/Manual 2/Hydraulic 2/Hydraulic 3/Hydraulic 3/Hydraulic 3/Hydraulic 3/Hydraulic
Max torque 575 daNm 4241 lbf*ft 700 daNm 5163 lbf*ft 810 daNm 5974 lbf*ft 1900 daNm 14013 lbf*ft 3400 daNm 3400 daNm
Max drilling speed 190 rpm 190 rpm 860 rpm 860 rpm 130 rpm 130 rpm 105 rpm 105 rpm 53 rpm 53 rpm
Inner passage 117 mm 4.6 in 66 mm 2.6 in 117 mm 4.6 in 100 mm 3.9 in 100 mm 100 mm

_SM-6-2017.indd 4 12/04/17 17:21

 SM-6 Hydraulic Microdrilling Rig
TECHNICAL DATA SHEET

Operating weight (approx.) 7000 kg 15432 lb

Undercarriage
- Track shoe width 300 mm 11.8 in
- Wheel base (centre idler to centre sprocket) 1780 mm 70.1 in
- Overall length 2303 mm 90.7 in
- Overall width (not extendable crawler) 1700 mm 67 in
- Travelling speed 1,65 km/h 1.03 mph
- Max climbing capacity (gradeability) 34 % (19°) 34 % (19°)
- Average ground pressure 0,067 MPa 9.7 psi
- Ground stabilizers n°2 fixed with inclined arm on front + n°2 fixed on rear n°2 fixed with inclined arm on front + n°2 fixed on rear
Power pack
- Diesel Engine make and model Deutz TCD3.6 L04 Deutz TCD3.6 L04
- Emission certification EU stage IV - US EPA tier4f EU stage IV - US EPA tier4f
- Diesel Engine power rating 100 kW @ 2000 134 HP @ 2000
- Fuel tank capacity 160 l 42 US gal
- Sound power level and sound pressure level LwA 105 - LpA 74 dB(A) LwA 105 - LpA 74 dB(A)
Hydraulic system
- Main pumps: variable axial pumps 200 l/min 53 US gal/min
- Set pressure main pumps 300 MPa 43511 psi
- Auxiliary pumps: gear pumps 86 + 23 l/min l/min 23 + 6 US gal/min
- Hydraulic oil tank capacity 270 l 71 US gal
Clamp & hydraulic joint breaker
- Nominal size 50 - 220 mm 2.0 - 8.7 in
- Maximum clamping force 140 kN 31473 lbf
- Maximum breaking torque 3000 daNm 22127 lbf*ft
Service winch
- Type controlled descent controlled descent
- 1st layer line pull 5 kN 1124 lbf
- 1st layer nominal rope speed 42 m/min 138 ft/min
Rope diameter 6 mm 0.24 in

STANDARD EQUIPMENT
• Steel undercarriage: width 1700 mm ring on the base machine enables • Telescopic boom of 400 mm on base
and shoes 300 mm parallel drilling on the tracks up carrier
• Load sensing hydraulic system. Main to +/- 90° • Modular mast and hoist system by
pump: variable axial type • Counter slide: slew ring on mast motoreduced
• Kinematic mechanism: for +/- 180° rotation • Rotary cradle with side shifting
Swiveling boom articulation by slew • Sliding mast by cylinder • Full radio remote control

OPTIONAL EQUIPMENT

• Undercarriage with rubber crawler • DTH lubricator • Wire line winch

• Wide range of feed stoke: • Double rotary kit • Led working lights
1400 - 1900 - 3400 mm • EN16228 safety cage kit • Workin parameters monitoring & recor-
• Wide range of rotary heads • Tier 3 EDG Diesel engine ding system
• Jet grouting kit • Special Low Headroom mast • Triplex pump 200 lt/min
• Top hammer kit • Cylinder hoist & feed • Extractor device
• 320 mm clamp & breaker • Foam pump & washing kit

_SM-6-2017.indd 1 12/04/17 17:21

 SM-6 Hydraulic Microdrilling Rig
MOVIMENTATIONS
Stroke A1 H1a H1b
1400 - Zoom In 53° 2910 mm 114.6 in 3315 mm 130.5 in
1400 - Zoom Out 48° 2780 mm 109.4 in 3145 mm 123.8 in
1900 - Zoom In 40° 2815 mm 110.8 in 3115 mm 122.6 in
1900 - Zoom Out 35° 2665 mm 104.9 in 2935 mm 115.6 in
2400 - Zoom In 40° 3130 mm 123.2 in 3430 mm 135.0 in
2400 - Zoom Out 35° 2955 mm 116.3 in 3225 mm 127.0 in
3400 - Zoom In 40° 3765 mm 148.2 in 4065 mm 160.0 in

H2
H1
3400 - Zoom Out 35° 3540 mm 139.4 in 3810 mm 150.0 in

A1

Stroke A 2 H 2 Stroke A3 H 3
1400 - Zoom In 25° 625 mm 24.6 in 1400 27° 3660 mm 144.1 in
1400 - Zoom Out 35° 720 mm 28.3 in 1900 27° 3880 mm 152.8 in
1900 - Zoom In 25° 1075 mm 42.3 in 2400 20° 3660 mm 144.1 in
1900 - Zoom Out 35° 1030 mm 40.6 in 3400 12° 3350 mm 131.9 in
2400 - Zoom In 25° 1075 mm 42.3 in
2400 - Zoom Out 35° 1030 mm 40.6 in
3400 - Zoom In 25° 1075 mm 42.3 in
3400 - Zoom Out 35° 1030 mm 40.6 in

A2

H3
A3
Zoom Out
Zoom In

1950
1980

2480

max 2920
min 2240

445 390
1845
1050

935
1230
2825
1800

715 165

_SM-6-2017.indd 5 12/04/17 17:21

 SM-6 Hydraulic Microdrilling Rig
JET GROUTING

3°
3° 3°
8200

1850

460 1780 500 300 1100

JET GROUTING VERSION

Max rod diameter 114 mm 3.54 in
Max treatment depth in a single passage 8m 26 ft

_SM-6-2017.indd 6 12/04/17 17:21

 SM-6 Hydraulic Microdrilling Rig

All technical data are purely indicative and subject to change without notice
TRANSPORT, DIMENSIONS AND WEIGHTS

300 1100

1700

max 2700
min 2560

Technical data sheet SM6-001 03/2017

500
460 1780 1410

Transport configuration Length Weight

Stroke version 1400 mm 5260 mm 207.1 in 6750 kg 14881 lb
Stroke version 1900 mm 5350 mm 210.6 in 6800 kg 14991 lb
Stroke version 2400 mm 5350 mm 210.6 in 6850 kg 15102 lb
Stroke version 3400 mm 5740 mm 226.0 in 7150 kg 15763 lb

This brochure has been edited and distributed by SOILMEC Spa. The present document cancels and override any previous ones. This brochu-
re shall not be distributed, reproduced or exhibited without SOILMEC Spa. authorization in accordance with to SOILMEC web site disclaimer
condition.

SOILMEC Spa distributes machinery and structures all over the world, supported by SOILMEC Spa subsidiary companies and dealers.
The complete Soilmec network list is available on the web site www.soilmec.it

www.soilmec.it

_SM-6-2017.indd 2 12/04/17 17:21