HOLLAND

2014
HOLLAND COUPLING PRODUCTS

CATALOG & SPECIFICATION GUIDE
OFFERING AN EXTENSIVE RANGE OF PINTLE

HOOKS, DRAWBARS, AND COUPLERS TO
MEET YOUR APPLICATION NEEDS
XL-PH10397SG-en-US Rev D
YOUR COMPLETE SOURCE
FOR COMMERCIAL VEHICLE
PRODUCT SOLUTIONS
In 2006, two industrial icons merged

to form SAF-HOLLAND, a global leader in
the design and manufacture of high-quality
components and systems for the commercial
vehicle industry. Today, SAF-HOLLAND represents
a range of brands providing suspension/axle
systems, fifth wheels, kingpins, coupling products,
landing gear and liftgate solutions for truck, tractor,
bus, and trailer applications.
• FIFTH WHEELS • MECHANICAL SUSPENSION/ • SEVERE-DUTY VOCATIONAL

• LANDING GEAR AXLE SYSTEMS AIR-RIDE SUSPENSIONS
• KINGPINS • TRAILER AXLES/BRAKES • BUS AIR-RIDE SUSPENSIONS
• COUPLINGS • AIR-RIDE SUSPENSION/AXLE • STEER AIR-RIDE

SYSTEMS SUSPENSIONS
• LIFTGATES
• KINGPINS
www.safholland.com
Contents
Reference Sections
Part Number Index ............................................................................................................................................................................. 2
Replacement Parts Numbers ............................................................................................................................................................... 4
National Stock Number (NSN) Reference Chart................................................................................................................................... 4
Coupling Products by Mounting Type and Rated Capacities ............................................................................................................... 5
Identifying Marks on Pintle Hooks, Couplers and Drawbars ................................................................................................................ 6
Drawbar Compatibilty Chart ............................................................................................................................................................ 42
General Safety Information ............................................................................................................................................................. 62
Coupling System Selection ............................................................................................................................................................... 64
Operating Conditions ....................................................................................................................................................................... 65
Cushioning Systems ......................................................................................................................................................................... 65
Mounting Information ...................................................................................................................................................................... 66
Glossary ........................................................................................................................................................................................... 67
Pintle Hooks EH-3050 & EH-HD Mounting Options .................................. 38

EH-3050 & EH-HD Dimensions and Parts .............................. 39
Rigid Mount
EH-20/40/60 Replacement Parts ........................................... 39
BH-200RN & BH-50mmRN .................................................. 8
DB-010EJ1 & DB-020FK1 ..................................................... 40
PH-10RP ............................................................................. 9
PH-T-60-AOL-8 ................................................................. 10
PH-30RP ........................................................................... 11 Drawbar Eyes and Hinge Assembly
DB-1250-3 ........................................................................... 44
Swivel Mount DB-040DQ1 ......................................................................... 45
PH-30SA ........................................................................... 12 DB-060FQ1 .......................................................................... 45
PH-30SB ........................................................................... 13 DB-100FQ1 .......................................................................... 45
PH-T-60-AOS-L-8 .............................................................. 14 DB-1228-1 ........................................................................... 46
PH-760 ............................................................................. 15 DB-1238 .............................................................................. 46
PH-775-01552 .................................................................. 16 DB-1245-1 ........................................................................... 46
PH-775SL.......................................................................... 17 DB-1235-1 ........................................................................... 46
DB-1235-3 ........................................................................... 46
Rigid Mount - Air Cushioned
DB-1400 .............................................................................. 48
PH-300 & PH-300-R .......................................................... 18
DB-1422 .............................................................................. 48
PH-210 ............................................................................. 19
DB-1400AC (Air Cushioned)................................................. 49
PH-310 ............................................................................. 20
DB-1407 Series .................................................................... 50
PH-550 ............................................................................. 21
DB-1407-SE.......................................................................... 51
PH-400 / 400-H ................................................................ 22
DB-1407-S ........................................................................... 51
PH-410 ............................................................................. 24
DB-045BW1 ......................................................................... 52
PH-419 ............................................................................. 25
DB-45BS1............................................................................. 52
Air Chamber Assemblies and Mounting Kits ..................... 26
DB-610-30 ........................................................................... 53
Couplers DB-1249-49 ......................................................................... 53
CP-400-H ............................................................................. 28 Drawbar Hinge Assembly ..................................................... 54
CP-360................................................................................. 29
CP-740 & CP-730................................................................. 30 Coupling Products & Accessories
PH-990ST71 ......................................................................... 31 Drawbar Guides ................................................................... 56
BH-50 .................................................................................. 32 Tow Hooks ........................................................................... 56
Pintle Hook Wear Gages ...................................................... 57
Couplers (non-road) for Industrial/GSE
Plunger Adjustment Gages ................................................... 57
CP-400-GSE & CP-400-CA ................................................... 34
XA-T-150-AF and CP-T-150-S02986..................................... 35
EH-3050......................................................................... 36–39 Dolly Spotter
EH-HD ............................................................................ 36–39 Dolly Master TF-675 and TF-675-1 ................................. 58–59
XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 1

Part Number Index
PART NUMBER PAGE NO. PART NUMBER PAGE NO. PART NUMBER PAGE NO.
AA-52550-1 6 PH-10RP41 9 PH-775-01552 4, 16
AA-52550-2 6 PH-10RP51 4, 9 PH-775-01552-1 16
AA-52550-4 6 PH-16-B 4, 6 PH-775-E 4
AA-55220-3 6 PH-30 4, 6 PH-775SL 17
BH-50 5, 32 PH-30RP 5, 36, 42, 57 PH-775SL11 6, 17, 65
BH-50mmRN 5, 36, 42, 57 PH-30RP41 4, 6, 11 PH-775SL21 4, 6, 17
BH-50mmRN41 8 PH-30RP51 4, 11 PH-990ST71 5, 6, 342, 65
BH-50mmRN51 8 PH-30SA 5, 42, 57, 65 PH-T-60-AL 4, 6
BH-200RN 5, 36, 42, 57 PH-30SA41 4, 12, 65 PH-T-60-AOL-8 4, 5, 6, 10, 36, 42
BH-200RN41 8 PH-30SA51 12 PH-T-60-AOS-L-8 4, 5, 6, 14, 42, 57
BH-200RN51 4, 8 PH-30SB 5, 42, 57, 65 PH-T-60-C 4
CP-360 4, 5, 6, 29, 42 PH-30SB41 4, 13 PH-T-60-S08350 4
CP-380 4, 6 PH-30SB51 13 PH-T-60-S10646 10
CP380-A 4 PH-30SE51 12, 13 PH-T-90-A 4, 6, 57
CP-400-5A 4, 6 PH-35 6 PH-T-100-A 4, 6
CP-400-CA 4, 5, 6, 34 PH-75 4 PH-T-125-A 4, 6
CP-400-GSE 5, 6, 34, 42 PH-200 4, 6, 57 PH-T-126-A 4, 6, 57
CP-400-H 4, 5, 6, 28, 42 PH-207A 4 PH-T-370 4
CP-400-S04729 4 PH-210 5, 6, 19, 42, 56, 57, 65 RK-02536 18
CP-730 4, 5, 30, 42 PH-210RA 26 RK-02536 22
CP-730-S05745 4 PH-210RA11 4, 19 RK-02772 15
CP-740 5, 6, 30, 42 PH-210RF 26 RK-03179 18
CP-T-150-S02986 35 PH-210RM 26 RK-05961 15
DB-010EJ1 5, 6, 40, 42 PH-210RM11 19 RK-06683 32
DB-020FK1 5, 6, 40, 42 PH-210RN 26 RK-62-O 10, 14
DB-030DQ1 6, 42 PH-210RN11 4, 19 RK-1024 54
DB-040DQ1 4, 5, 6, 42, 45 PH-300 5, 6, 18, 26, 42, 56, 57, 65 RK-10291 31
DB-045BS1 5, 43, 52 PH-310 5, 6, 20, 42, 56, 57, 65 RK-10545 17, 19, 20
DB-045BW1 5, 6, 43, 52 PH-310RA 26 RK-10545-1 17, 19, 20
DB-060FQ1 4, 5, 6, 43, 45 PH-310RA11 20 RK-10632 11, 12, 13
DB-100FQ1 5, 6, 43, 45 PH-310RF 26 RK-10632-1 11, 12, 13
DB-610-30 4, 5, 6, 43, 53, 65 PH-310RM 26 RK-11438 38
DB-1228-1 5, 6, 42, 46, 47 PH-310RM11 20 RK-11439 38
DB-1235-1 4, 5, 6, 42, 46, 47 PH-310RN 26 RK-11440 38
DB-1235-3 5, 6, 42, 46, 47 PH-310RN11 20 RK-11510 17
DB-1238 4, 5, 6, 42, 46, 47 PH-400 5, 6, 22, 26, 42, 56, 57, 65 RK-11789 38
DB-1245-1 5, 6, 42, 46, 47 PH-400-H 5, 6, 22, 26, 57 RK-775 16
DB-1249-2H 4, 6 PH-410 5, 6, 24, 42, 56, 57, 65 RK-T-61 14
DB-1249-49 4, 5, 6, 42, 53 PH-410RA 26 RK-T-150-S02986 35
DB-1249-S06588 4 PH-410RA11 24 RK-T-551 31
DB-1250-3 4, 5, 6, 42, 44 PH-410RF 26 TF-675 58, 59
DB-1250-15 4 PH-410RM 26 TF-675-1 58, 59
DB-1307-S 4, 6 PH-410RM11 24 TF-10520 57
DB-1385 4 PH-410RN 26 TF-10521 57
DB-1400 5, 6, 43, 48 PH-410RN11 24 TF-10522 57
DB-1400AC 5, 6, 43, 49, 65 PH-419 5, 6, 25, 42, 56, 57, 65 TF-10523 57
DB-1407 5, 6, 43, 50, 565 PH-419RA 26 TF-10612 57
DB-1407-S 5, 6, 43, 50, 565 PH-419RA11 25 TF-10960 57
DB-1407-SE 5, 6, 43, 50, 565 PH-419RF 26 TH-10050-3 56
DB-1422 5, 6, 43, 48 PH-419RM 26 TH-10050-3L 56
EH-20/40 4 PH-419RM11 25 TH-10050-3R 56
EH-3050 4, 5, 36, 37, 38, 42 PH-419RN 26 TH-10050-5 56
EH-3050AL-13 38 PH-419RN11 25 TH-10050-5L 56
EH-3050AL-14 38 PH-550 5, 226, 42, 56, 57, 65 TH-10050-5R 56
EH-3050AL-17 38 PH-760 5, 6, 15, 42, 57 XA-01154 29
EH-HD 5, 36, 37, 38, 39, 42 PH-760M-A 4 XA-01740 30
MH-1800-D 6 PH-760M-X 4 XA-02234 32
PH-10RP 5, 36, 42, 57 PH-775 4, 5, 16, 42, 57 XA-02235 32
2 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

Part Number Index
PART NUMBER PAGE NO. PART NUMBER PAGE NO. PART NUMBER PAGE NO.
XA-02240 32 XA-T-361 31 XB-E-552-1 16
XA-02241 32 XA-T-56 12, 13 XB-H-38 32
XA-02555 56 XA-T-60-A 6 XB-11048 8, 9, 10, 11, 12, 13, 14
XA-02556 56 XA-T-88 29, 30 XB-11157 8, 9, 10, 11, 12, 13, 14
XA-02608 18, 19, 20, 22, 24, 25, 26 XB-02724 32 XB-HNH-34-F 15
XA-02721 32 XB-02745 32 XB-PWM-38-78 32
XA-04108 32 XB-0310 18 XB-S10647 17, 20, 24, 25
XA-04156 18, 20, 22, 24, 25, 26 XB-03103 18, 21, 22 XB-T-199 18, 19, 20, 22, 24, 25, 26
XA-04337 32 XB-03104 17, 18, 20, 21, 22, 24, 25 XB-T-20-2 29, 30
XA-04430 32 XB-03731 30 XB-T-307 31
XA-05146 19 XB-0437 31 XB-T-33-A 29
XA-05246 32 XB-04473 28, 34 XB-T-362 31
XA-05263 32 XB-04847 35 XB-T-377 29
XA-05491 21 XB-05493 21 XB-T-45-1 14
XA-05492 21 XB-05496 21 XB-T-60 12, 13, 15, 30
XA-05494 21 XB-05497 21 XB-T-61 31
XA-05738 30 XB-05498 21 XB-T-89-4 8, 9, 10, 11, 12, 13, 14
XA-05739 30 XB-05514 32 XB-T-9N 12, 13
XA-05740 30 XB-05825 21 XB-T-993 31
XA-06101 29, 30 XB-06150 30 XB-T-993-1 31
XA-07766 29 XB-06181 34 XB-T-9N 12, 13
XA-08636 15 XB-10109 28, 34 XB-TLN-1000-7 31
XA-09862 26 XB-10537 17, 20, 24, 25 XD-361 6
XA-10008 31 XB-10738 31 XD-380 6
XA-10089 15 XB-11048 8, 9, 10, 11, 12, 13, 14 XD-400 6
XA-10198 26 XB-11157 8, 9, 10, 11, 12, 13, 14 XD-400-5-1 6
XA-10286 31 XB-120-2 15 XD-731 6
XA-10287 31 XB-127 15, 16 XD-01155-1 6
XA-11042 30 XB-165945 18, 19, 20, 22, 24, 25, 26 XD-02275-1 6
XA-11545 18, 19, 20, 22, 24, 25, 26 XB-166321 26 XD-02384-2 6
XA-10546 17 XB-21-S-187-1250 30 XD-5275 54
XA-10802-F 12 XB-21-S-250-1250 32 XD-5315 54
XA-10802-R 12 XB-21-S-312-1250 30 XD-10286 6
XA-10891 13 XB-21-S-500-1000 30 XD-10570 6
XA-128 15 XB-3094 29 XD-10572 6
XA-199-4 16 XB-3547 32 XD-10573 6
XA-199-9 15 XB-382 28, 34 XD-11231 6
XA-211 34 XB-403 28, 30, 34 XD-361 6
XA-392 29 XB-5 29 XD-380 6
XA-393 29 XB-639 32 XD-400 6
XA-394 29 XB-646 35 XD-400-5-1 6
XA-401-X1 34 XB-708 28, 34 XD-5275 54
XA-401-X3 28 XB-757 16 XD-5315 54
XA-402-X1 28 XB-758 14 XD-731 6
XA-402-X1 34 XB-763 15 XE-1228 6
XA-404-X 28, 34 XB-763A 15 XE-1230 6
XA-732 30 XB-767 14, 15, 29, 30 XE-1235 6
XA-736 30 XB-767-10 16 XE-1245 6
XA-749-2 16 XB-770-1 31 XE-1249 6
XA-766-2Z 16 XB-771-1 15 XE-1249-2H-10 6
XA-768 15 XB-772 15 XE-1249-48 6
XA-782 16, 17 XB-773 14, 15, 16 XE-1385 6
XA-768 15 XB-781-1 16, 17 XE-02137-HLH 6
XA-T-2 35 XB-771-1 15 XE-10373 6
XA-T-56 12, 13 XB-772 15 XE-T-87 6
XA-T-60-A 6 XB-773 14, 15 XE-T-91 6
XA-T-150-AF 4, 35 XB-80-1 31 XW-1235 6
XA-T-317-8 31 XB-C-375-C-150 32 XW-1249-48 6

Replacement Part Numbers & NSN Reference Chart
Replacements for Discontinued Models

Discontinued Replaced By Discontinued Replaced By
CP-380 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP-400-CA PH-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-210RA11
CP380-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP-400-H PH-200-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-210RN11
CP-400-5A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XA-T-150-AF* PH-207A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued
DB-1250-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DB-040DQ1 PH-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-30RP41
DB-1307-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued PH-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued
DB-1385 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DB-060FQ1 PH-T-60-AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-10RP51
EH-20/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EH-3050 PH-T-90-A & PH-T-100-A . . . . . . . . . . . . . . . . . . . PH-30SA41
PH-16-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BH-200RN51 PH-T-125-A & PH-T-126-A . . . . . . . . . . . . . . . . . . PH-30SB41
* Mounting hole pattern different
National Stock Number* (NSN) Reference Chart

*also refered to as ‘NATO’ Stock Number
HOLLAND Cage Code** – 74410

HOLLAND Casting Code – HLH
**NATO Commercial and Governmental Entity (NCAGE) Code
DESIGNATED HOLLAND CURRENT

NSN MODEL STATUS
MODEL NUMBER HOLLAND MODEL
PINTLE HOOKS
2540012653887 Obsolete BH-200RN51
2540006519484 PH-T-60-C Obsolete No Replacement
2540007072564 PH-T-370 Active (special order) PH-T-370
2540007760103 PH-760M-X Series Active PH-760M-S Series
PH-30 Obsolete PH-30RP51
2540008359039
PH-T-60-AOL-8 Active PH-T-60-AOL-8
2540008916831 PH-T-60-AL Obsolete PH-10RP51
2540012819723 PH-75 Obsolete No Replacement
2540013373725 PH-760M-A Series Active PH-760M-A Series
2540013768063 PH-T-60-AOS-L-8 Active PH-T-60-AOS-L-8
2540013892221 PH-T-60-AOL-8 Active PH-T-60-AOL-8
2540014759206 PH-775-E Active PH-775-E
2540015070802 PH-775-01552 Active PH-775-01552
2540015306881 PH-T-60-S08350 Spec’d no paint – Contact SAF-HOLLAND for information
2540015584395 PH-775SL21 Active PH-775SL21
COUPLERS
2540012137842 CP-360 Active CP-360
2540004999407 CP-400-5A Active CP-400-5A
2540007687455 CP-400-CA Active CP-400-CA
2540011460115 CP-400-S04729 Active CP-400-S04729
2540012058577 CP-360-S01340 Active CP-360-S01340
2540013594964 CP-730-S05745 Active CP-730-S05745
DRAWBARS
2540011647252 DB-060FQ1 Active DB-060FQ1
2540011647252 DB-1385 Obsolete DB-060FQ1
2540011924699 DB-1238 Active DB-1238
2540012356865 DB-1235-1 Active DB-1235-1
2540013825836 DB-1249-S06588 Active DB-1249-S06588
2540014619306 DB-1250-3 Active DB-1250-3
2540014886221 DB-610-30 Active DB-610-30
5306011974369 DB-1249-2H Active DB-1249-2H
5306012698693 DB-1249-49 Active DB-1249-49

Coupling Products by Mounting Type and Rated Capacities
MAXIMUM GROSS
MAXIMUM MAXIMUM GROSS TRAILER WEIGHT WITH
MODEL MOUNT VERTICAL LOAD TRAILER WEIGHT A MAXIMUM VERTICAL
LOAD OF 500 LB. (227 KG)
lb. kg lb. kg lb. kg
PINTLE HOOKS
Rigid - Hook Rating 4,000 1,814 20,000 9,072
BH-200RN / BH-50mmRN
Rigid - Ball Rating 1,000 454 10,000 4,536
PH-10RP Rigid 2,000 907 10,000 4,536
PH-T-60-AOS-L-8 Swivel 3,600 1,633 18,000 8,165
PH-T-60-AOL-8 Rigid 6,000 2,722 30,000 13,608
PH-30RP Rigid 6,000 2,722 30,000 13,608
PH-30SA Swivel 6,000 2,722 30,000 13,608
PH-30SB Swivel 6,000 2,722 30,000 13,608
PH-760 Swivel 9,800 4,445 49,000 22,226
PH-775 Swivel 20,000 9,072 100,000 45,360
‘AIR CUSHIONED’ PINTLE HOOKS
PH-300 / PH-300-R Rigid 18,000 8,165 72,000 32,659
PH-210 Rigid 18,000 8,165 90,000 40,824
PH-310 Rigid 20,000 9,072 100,000 45,360
PH-400 / PH-400-H Rigid 20,000 9,072 100,000 45,360
PH-410 Rigid 20,000 9,072 100,000 45,360
PH-419 Rigid 20,000 9,072 100,000 45,360
PH-550 Rigid 25,000 11,340 100,000 45,360
COUPLERS – DROP JAW
CP-400-H Rigid 7,500 3,402 30,000 13,608
CP-360 Rigid 3,000 1,361 52,000 23,587
CP-730 Swivel 20,000 9,072 100,000 45,360
CP-740 Rigid 20,000 9,072 100,000 45,360
COUPLERS – PIN & CLEVIS
PH-990ST71 Swivel 3,000 1,361 100,000 45,360
BALL HITCH
BH-50 8,000 3,629 80,000 36,288
COUPLINGS (NON-ROAD) FOR INDUSTRIAL / GSE
CP-400-GSE / CP-400-CA Rigid 7,500 3,402 30,000 13,608
EH-3050 Rigid 500 227 50,000 22,680
EH-HD Rigid 1,000 454 50,000 22,680
DB-010EJ1 Weld-On 2,000 907 10,000 4,536 20,000 9,072
DB-020FK1 Weld-On 4,000 1,814 20,000 9,072 40,000 18,144
DRAWBARS
DB-1250-3 Rigid Bolt-On 3,000 1,361 15,000 6,804 50,000 22,680
DB-1228-1 Rigid Bolt-On 4,000 1,814 20,000 9,072 60,000 27,216
DB-1238 Rigid Bolt-On 4,500 2,041 22,000 9,979 70,000 31,752
DB-1407-SE Swivel Weld-On 500 227 34,000 15,422
DB-1235-1 Rigid Bolt-On 7,000 3,175 35,000 15,876 90,000 40,824
DB-1235-3 Rigid Bolt-on 7,000 3,175 35,000 15,876 90,000 40,824
DB-1407-S Swivel Weld-On 500 227 40,000 18,144
DB-040DQ1 Rigid Bolt-On 8,000 3,629 40,000 18,144 60,000 27,216
DB-1245-1 Rigid Bolt-On 8,000 3,629 40,000 18,144 90,000 40,824
DB-1249-49 Rigid Bolt-On 9,000 4,082 45,000 20,412 85,000 38,556
DB-045BW1 Swivel Weld-On 9,000 4,082 45,000 20,412 85,000 38,556
DB-045BS1 Rigid Bolt-On 9,000 4,082 45,000 20,412 85,000 38,556
DB-610-30 Swivel Weld-On 9,000 4,082 45,000 20,412 85,000 38,556
DB-060FQ1 Rigid Bolt-On 15,000 6,804 60,000 27,216 90,000 40,824
DB-1407 Series Rigid Bolt-On 16,000 7,258 85,000 38,556 120,000 54,432
DB-1400 Rigid Weld-On 18,000 8,165 90,000 40,824 120,000 54,432
DB-1422 Rigid Weld-On 18,000 8,165 90,000 40,824 120,000 54,432
DB-100FQ1 Rigid Bolt-On 20,000 9,072 100,000 45,360 125,000 56,700
DRAWBARS ‘AIR CUSHIONED’
DB-1400AC Rigid Weld-On 18,000 8,165 90,000 40,824 120,000 54,432

Identifying Marks on Pintle Hooks, Couplers and Drawbars
PART NUMBER MAIN FRAME NUMBER DISTINGUISHING FEATURES

PH-16-B XE-02137-HLH 2˝ Fixed Ball Duplex Hitch
PH-30 AA-52550-4 Has Push-Button Lock
PH-30RP41 AA-52550-4 Rigid Pintle Hook with 4-Bolt 1.75˝ x 2.38˝ Bolt Pattern
PH-35 AA-52550-1 Swivel Pintle Hook with Mounting Flanges
PH-200 XD-02384-2 7/8˝ 4-Bolt Mounting
PH-210 XD-10570 7/8˝ 4-Bolt Mounting
PH-300 XD-01155-1 7/8˝ 6-Bolt Mounting 1.88˝ x 6˝ Spacing
PH-310 XD-10572 7/8˝ 6-Bolt Mounting 1.88˝ x 6˝ Spacing
PH-400 XD-02275-1 7/8˝ 10-Bolt Mounting
PH-400-H XD-02275-1 7/8˝ 8-Bolt Mounting
PH-760 AA-52550-2 3/4˝ 2-Bolt Mounting Flanges 6.5˝ Apart
PH-775SL11 AA-55220-3 74410 Swivel Pintle Hook with Housing
PH-775SL21 AA-55220-3 74410 Swivel Pintle Hook with Housing
PH-T-60-AL XA-T-60-A 1/2˝ 4-Bolt Mounting 2.12˝ x 3.4˝ Bolt Pattern
PH-T-60-AOL-8 AA-52550-4 Has Cotter Pin and Chain Latch Lock
PH-T-60-AOS-L-8 AA-52550-1 Swivel Pintle Hook with Mounting Flanges
PH-T-90-A XE-T-91 Swivel Pintle Hook with Mounting Flanges and Square Spring
PH-T-100-A XE-T-87 Swivel Pintle Hook with Mounting Flanges and Round Spring
PH-T-125-A XE-T-87 Swivel Pintle Hook - Undermount and Round Spring
PH-T-126-A XE-T-91 Swivel Pintle Hook - Undermount and Square Spring
PH-990ST71 XD-10286 Swivel Pintle Hook with Housing and Large “Fish Mouth”
CP-360 XD-361 Rigid Coupler 6-Bolt Mounting
CP-380 XD-380 Rigid Coupler 4-Bolt 4.5˝ x 4.5˝
CP-380-A XD-380 Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern and Secondary Lock
CP-400-5A XD-400-5-1 Rigid Coupler 4-Bolt 1.5˝ x 3.25˝ Bolt Pattern
CP-400-CA XD-400 Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern
CP-400-GSE XD-400 Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern
CP-400-H XD-400 Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern with Secondary Lock
CP-740 XD-731 Rigid Couper with Hood
DB-010EJ1 DB-010EJ1 2.5˝ I.D. Eye with 2˝ x 4˝ Mounting Base
DB-020FK1 MH-1800-D 3˝ I.D. Eye
DB-030DQ1 XE-10373 2.5˝ Eye with 4-Bolt Mounting for 1/2˝ Bolts
DB-040DQ1 XE-10373 2.5˝ Eye with 4-Bolt Mounting for 5/8˝ Bolts
DB-060FQ1 XE-1385 3˝ I.D. Eye with 4-Bolt Mounting for 3/4˝ Bolts
DB-100FQ1 XE-1385 3˝ I.D. Eye with 4-Bolt Mounting for 7/8˝ Bolts
DB-045BW1 Date Stamp Only 2.38˝ I.D. Eye Drawbar with Housing 3˝ x 4˝ x 6˝
DB-610-30 XW-1249-48 3˝ I.D. Eye Drawbar with Housing 3˝ x 4˝ x 6˝
DB-1228-1 XE-1228 2.5˝ I.D. Eye with 6-Bolt Mounting 1.25˝ x 3˝ Shank
DB-1235-1 XE-1235 3˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.12˝ Shank
DB-1235-3 XW-1235 3.0˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.0˝ Shank
DB-1238 XE-1230 3˝ I.D. Eye with 6-Bolt Mounting 1.62˝ x 3˝ Shank
DB-1245-1 XE-1245 2.38˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.12˝ Shank
DB-1249-2H XE-1249-2H-10 3˝ I.D. Eye with 2˝ O.D. x 4.25˝ Shank
DB-1249-49 XE-1249-48 3˝ I.D. Eye with 2˝ O.D. x 8.5˝ Shank
DB-1250-3 Date Stamp Only 2.5˝ I.D. Eye Drawbar with 1.5˝ Diameter x 3.25˝ Shank
DB-1307-S-1 XE-1249 3˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 8.25˝
DB-1400 DB-1400 2.38˝ I.D. Eye Weld-on Drawbar
DB-1400AC-1 DB-1400AC 2.38˝ I.D. Eye Weld-on Drawbar with Snubber on 12˝ Rod
DB-1400AC-4 DB-1400AC 2.38˝ I.D. Eye Weld-on Drawbar with Snubber on 10˝ rod
DB-1407-S Date Stamp Only 2.38˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 8.25˝
DB-1407-SE Date Stamp Only 2.38˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 9.63˝
DB-1422 1422 2.38˝ I.D. Eye Drawbar for “A-Frame” Mounting

PINTLE HOOKS
• Combination Ball / Hook
• Rigid Mount
• Swivel Mount
• NoLube™
• Air Cushioned
Pintle Hooks – Rigid Mount
BH-200RN41 Features 2˝ diameter ball

BH-50mmRN41 Features 50mm diameter ball Mounting Dimensions
Application
A rigid mount pintle hook that combines a pintle hook and ball hitch. 6.39˝
5.39˝
Designed for customers who need the strength and capacity to pull
trailers equipped with drawbars, as well as the flexibility to pull trailers
with a 2˝ or 50mm ball hitch.
TM
One-hand operation and

automatic secondary lock 2.00˝
Patent #7,431,321 or
50mm
Our unique design is: BALL 8.73˝
• Stronger and more durable
than removable ball designs. 6.75˝
• Shape eliminates premature 1.63˝
wear typically caused by the
drawbar pulling against the
ball. 2.00˝
• Provides better oscillation
Forged from and articulation in off-road
a special steel conditions than a removable
alloy that 4.50˝
ball design.
is heat treated 3.38˝
for strength,
and durability.
.53˝
Available with a
tethered lock pin
as BH-200RN51 or
BH-50mmRN51 1.75˝
Weight: 10 lbs. (4.5 kg)
High
e
capa st
comb city .46˝
in
Capacities in its ation
class
.
Pintle Hook:
4,000 lbs. (1,810 kg) Maximum Vertical Load
20,000 lbs. (9,070 kg) Maximum Gross Trailer Weight Replacement Parts
2˝ Ball / 50mm Ball: For BH-200RN41/50mmRN41
1,000 lbs. (454 kg) Maximum Vertical Load use RK-10636
XB-T-89-4
10,000 lbs. (4,540 kg) Maximum Gross Trailer Weight XB-11048
Drawbar Eye Dimensions

2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
Additional Information For BH-200RN51/50mmRN51

use RK-10636-1
• For off-road* applications, reduce the above maximum
capacities by 25% and use with a swivel-mount drawbar. XB-11157
• Tested in accordance with SAE J847.
• For additional specification detail, refer to document numbers:
XL-PH377 for BH-200RN41 XB-T-89-4
XB-11048
XL-PH385 for BH-200RN51
XL-PH379 for BH-50mmRN41
XL-PH384 for BH-50mmRN51
* See definition on page 67

PH-10RP41
Application Mounting Dimensions
A rigid mount pintle hook designed for over-the-road
5.39˝
and off-road towing.
TM
Cast steel body is heat One-hand operation and
treated for strength automatic secondary lock
and durability. Patent #7,431,321
5.81˝
3.75˝
The hook is designed

for maximum
articulation and
reduced wear. 1.63˝
4.50˝
3.38˝
1.69˝
Available with a
tethered lock pin .53˝
as PH-10RP51
Weight: 7.5 lbs. (3.4 kg) 1.75˝
.25˝
Capacities
2,000 lbs. (910 kg) Maximum Vertical Load
10,000 lbs. (4,540 kg) Maximum Gross Trailer Weight
Replacement Parts
2˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. For PH-10RP41 use RK-10632
XB-T-89-4
Additional Information XB-11048

capacities by 25% and use with a swivel-mount drawbar.
• For additional specification detail, refer to document number
XL-PH350. For PH-10RP51, refer to XL-PH387. For PH-10RP51
use RK-10632-1
* See definition on page 67 XB-11157
XB-T-89-4
XB-11048

PH-T-60-AOL-8
A rigid mount pintle hook designed for over-the-road and
off-road towing within stated capacities.
Forged from a special steel

alloy that is heat treated The latch is cast steel
for strength and durability. alloy and heat treated for 5.73˝
1.88˝
strength and long life. 7.30˝
6.32˝
4.50˝
3.38˝
1.69˝
Weight: 11 lbs. (5 kg)

1.75˝
Capacities .53˝ DIA.

Replacement Parts
Drawbar Eye Dimensions RK-62-O
2˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. XB-11048
XB-11157
Additional Information
XL-PH203, or XL-PH333 for PH-T-60-S10646. XB-T-89-4

PH-30RP41
A versatile rigid mount pintle hook designed for over-the-road and
5.39˝
off-road towing.
TM
One-hand operation and

automatic secondary lock
Patent #7,431,321 5.81˝
The hook is
designed for
maximum
articulation and 5.69˝
reduced wear.
1.94˝
Available 4.50˝
with a 3.38˝
Forged from a special steel tethered 1.69˝
alloy that is heat treated lock pin as
for strength and durability. PH-30RP51
.53˝
Weight: 8.4 lbs. (4.2 kg) 1.75˝
.25˝
Capacities
Replacement Parts
Drawbar Eye Dimensions For PH-30RP41 use RK-10632
XB-T-89-4
XL-PH351. For PH-30RP5refer to XL-PH364. For PH-30RP51 use RK-10632-1
XB-T-89-4
XB-11048

Pintle Hooks – Swivel Mount (with Spring Shock Absorption)
PH-30SA41
A split flange mount, swivel style pintle hook designed for over-the-road and
off-road applications. The spring provides shock absorption at the coupling—
ideal for utility and construction applications.
6.75˝
Forged from a special steel .63˝

alloy that is heat treated for MAX
TM
REFERENCE 7.75˝
One-hand operation and strength and durability.
Patent #7,431,321 5.88˝
16˝
9.25˝
.53˝ 4.50˝
A steel spring provides 2.25˝
shock absorption.
2˝
Cast ductile iron mounting 5.88˝

flanges for max. 5/8˝ plate. Available with 4.25˝
a tethered
lock pin as 2.50˝
1˝
PH-30SA51.
Weight: 32 lbs. (14.5kg) 4˝
8˝
Capacities
Replacement Parts
For PH-30SA41 use RK-10632 For PH-30SA51
2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. use RK-10632-1
XB-T-89-4
XB-11048

capacities by 25%. Not for use with a swivel-mount drawbar.
• Tested in accordance with SAE J847. XB-T-89-4
XB-11048
XL-PH368. For PH-30SA5refer to XL-PH369.

XB-T-60
XA-10802-F
XA-10802-R
PH-30SE41
XB-T-9N
XA-T-56
XB-T-52
Available with a XB-767

tethered lock pin
as PH-30SE51.

Pintle Hooks – Swivel Mount (with Spring Shock Absorption)
PH-30SB41
An under-mount, swivel style pintle hook designed for over-the-road
and off-road applications. The spring provides shock absorption at the
coupling—ideal for utility and construction applications.
9.44˝
TM
Fully machined, One-hand operation and 7.75˝

high-strength, cast ductile automatic secondary lock
iron housing with a zerk Patent #7,431,321
5.88˝
fitting for easy lubrication.
.94˝
BRACE LUG
ATTACHMENT
16˝
12˝
10.38˝
Steel spring 7.88˝
provides shock 5.19˝
absorption.
2.5˝
.81˝
Integrated mount 1.75˝
for cross-bracing. Available
with a
tethered 1.25˝
Weight: 38 lbs. (17.2 kg) lock pin as
PH-30SB51 10.19˝
Capacities
Replacement Parts
RK-10632 For PH-30SB51
2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. XB-T-89-4
use RK-10632-1
XB-T-69-C

XB-T-89-4
• Tested in accordance with SAE J847. XB-11048
XL-PH365. For PH-30SB5refer to XL-PH371.

XB-T-60
PH-30SE41
XB-T-9N
XA-T-56
XB-T-52
Available with a
XA-10891
tethered lock pin
as PH-30SE51.

Pintle Hooks – Swivel Mount
PH-T-60-AOS-L-8
A split flange mounted, swivel style pintle hook designed for over-the-road
and off-road applications.
The body is forged from special alloy steel that is heat treated for
strength and durability. The special pintle shape is designed for maximum 4.67˝
articulation and reduced wear.
2.95˝
Latch is cast steel alloy and heat
treated for strength and long life. 1.88˝
Swivel housing
includes a bottom
mounted grease 2.68˝
fitting for easy .69˝
lubrication. MAX.
REFERENCE
4.00˝ 6.16˝
4.50˝ MIN. CLEAR

AREA
2.25˝
.88˝
Mounting flanges 1.44˝
allow for a maximum 2.88˝ 1.75˝
11/16˝ plate.
1.69˝ .53˝ HOLES

Weight: 15 lbs. (6.8 kg) 3.38˝ 1.28˝ DIA. HOL E
Capacities
Replacement Parts
2˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
Additional Information XB-T-20-2

XA-T-88
RK-T-61 XB-T-45-1
• Tested in accordance with SAE J847. (QTY. 4)
• For additional specification detail, refer to XB-773
document number XL-PH208. XB-767
XB-758
* See definition on page 67 (QTY. 4) XB-T-89
(QTY. 4)
RK-62-O
XB-11157
XB-11048
XB-T-89-4

PH-760
Heavy-duty construction for on- and off-road applications where a
.75˝ 1.50˝
significant amount of articulation is required. MAX.
REFERENCE
To ensure long life, the front Mounting flanges allow for

and rear flanges and pivot a maximum 3/4˝ plate. 7.6˝
1.81˝
bolt include zerk fittings for
for easy lubrication.
The forged steel
alloy body and
the cast steel latch
are heat treated 4.19˝ 8.75˝
for strength and 13.7˝
durability. 8.50˝
4.25˝ MIN. CLEAR
AREA
2.00˝
4.00˝
.78˝ DIA.
(2 HOLES REQ.)
3.25˝ 1.88˝ DIA. HOL E
The hook is
designed for
maximum
6.50˝
articulation. 3.25˝
Weight: 36 lbs. (16.3 kg) 3.50˝
Capacities 4.12˝ .75

BOLTS
9,800 lbs. (4,440 kg) Maximum Vertical Load (2 REQ.)
49,000 lbs. (22,230 kg) Maximum Gross Trailer Weight 8.50˝
Replacement Parts
3˝ I.D. with 1.25˝ to 1.63˝ diameter section. RK-02772
XB-T-60 XB-767
(Qty. 2) XA-763
XB-HNH-34-F
• For off-road* applications, reduce the above maximum (Qty. 2) XB-772
capacities by 25%. Not for use with a swivel-mount drawbar. (Qty. 2)
XA-763A
• For additional specification detail, refer to document RK-05961
number XL-PH215. XB-10089
XB-127
XB-773
* See definition on page 67 XB-771-1
XA-08636
XB-T-60 XB-10089
XB-128
XA-768
XA-199-6
(SUB-ASSY.) XA-08636
(SUB-ASSY.)

PH-775-01552 (Lubricated)
significant amount of articulation is required.
Cast steel alloy latch is 5.12˝
Grease fitting for heat treated for strength
easy lubrication. and durability.
1.75˝
4.38˝
6.56˝ 8.44˝
6.25˝
4.50˝
2.25˝
A one piece housing

keeps contaminants 2.25˝
from entering the 6.25˝
pintle hook assembly. 4.50˝
Body and housing are forged from

special steel alloy and heat treated for
high strength, and wear resistance. .94˝ DIA.
(4 HOLES)
6.50˝
3.25˝ MIN. CLEAR AREA

3.25˝ 2.25˝
6.50˝ 4.50˝
Capacities .28 X 45°

CHAMFER
20,000 lbs. (9,070 kg) Maximum Vertical Load 2.25˝ .94˝ DIA.
100,000 lbs. (45,360 kg) Maximum Gross Trailer Weight 4.50˝ (4 HOLES)
4.00˝ DIA. HOLE
Replacement Parts
3˝ I.D. with 1.63˝ diameter section. XB-120-2 RK-775
LATCH KIT
XB-E-552-1
• For off-road* applications, reduce the above maximum capacities
by 25%. Not for use with a swivel-mount drawbar. XA-766-2Z
• Tested in accordance with SAE J847. XB-767-10
• For additional specification detail, refer to document XB-757 XB-127

number XL-PH246. XB-781-1
XA-782
* See definition on page 67 XA-749-2
The Holland PH-775-01552 complies with NOM-035-SCT-2-2010

XB-780-1
Safety Specifications and Test Methods.
PH-775-01552-1
XA-199-4

PH-775SL11 (NoLube®)
significant amount of articulation is required.
4.00 MAX
5.27˝SQ.
A one-piece sealed housing keeps TM
contaminants from entering the One-hand operation and

pintle hook assembly. automatic secondary lock 1.75
Patent #7,431,321
4.43˝
Cast steel alloy latch is

heat treated for strength
and durability. 6.74˝ 8.26˝
6.62˝
4.50˝
2.25˝
SQ.
2.25˝
SQ.
4.50˝ 6.62˝
Available with
Body and housing are forged a tethered 0.91˝
from special steel alloy and 4 HOLES
lock pin as
heat treated for high strength PH-775SL21. MIN. CLEARANCE
and wear resistance.
® 6.75˝ SQ.
3.38˝
SQ.
.94˝
Weight: 57 lbs. (25.8 kg) No lubrication required. 4.03˝ THRU DIA.
WITH .28˝x 45˚
CHAMFER GAP
2.25˝ SQ.
CL
HOUSING
PROFILE
Capacities REF
4.50˝ TYP. SQ.

CL
Replacement Parts
RK-10545 LATCH KIT For PH-775SL21 use
3˝ I.D. with a 1.63˝ diameter section. RK-10545-1 LATCH KIT
XB-10537 XB-S10647
• For off-road* applications, reduce the above maximum capacities
by 25%. Not for use with a swivel-mount drawbar.
XB-03104
XB-10537
• For additional specification detail, refer to document
RK-11510
number XL-PH334. For PH-775SL2refer to XL-PH339. Seal Kit
XA-10546
Housing Subassembly

XB-781-1*
PH-775SN11
Hook Subassembly XA-780-1*
The Holland PH-775SL NoLube complies with NOM-0350-SCT-2-2010
XA-782*
PH-775SN21
Hook Subassembly
* Included in
Hook
Subassemblies

Pintle Hooks – Rigid Mount – Air Cushioned
PH-300 and PH-300-R

A rigid mount pintle hook designed for enhanced wear resistance. Used
for on- and off-road applications. 5.76˝ 7.25˝
.38˝ MIN .
Unique one-hand latch operation. Plunger/snubber force is 2.00˝ MAX.
Also available with reversed latch developed by the vehicle’s air
handle, PH-300-R (see inset). system to reduce wear and to
provide shock absorption. 10.5˝
6.00˝
Adjustable .94˝
plunger
3.8˝
.69˝
3/8˝ to 1/4”
NPT Reducer
3/8˝NPT Plug
7.5˝
3.25˝ 3.75˝
DIA. MIN . *
PH-300-R
Austenitic Manganese
(reverse latch) .12˝
steel alloy body 1.88˝ 6.00˝
for enhanced wear
resistance. 3.75˝
2.5˝
Weight: 42 lbs. (19 kg) 3.00˝ .81˝ DIA. TYP.

6.00˝ (6 REQ.)
The complete assembly includes a pintle hook, plunger, air chamber, and
mounting bracket. For pintle hooks without an air chamber, bracket, or
* Center hole not required if
plunger, order PH-300-1 or PH-300-R-1. used without air chamber.
The PH-300 can be operated with or without the air chamber. For easier
coupling, drawbar guides are available, see page 56.
Capacities Replacement Parts

72,000 lbs. (32,660 kg) Maximum Gross Trailer Weight PH-300 use RK-02536 PH-300-R use RK-03179

XB-03104
2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. XB-03104
XB-03103
• For off-road* applications, reduce the above maximum XB-165945 Included with
XB-T-199
• Tested in accordance with SAE J847 (Type II).

XA-04156
number XL-PH243. For PH-300-R, refer to XL-PH248.
Included with
* See definition on page 67 XA-11525 XB-165945
XB-T-199
XA-02608 Cylinder and Bracket Sub-Assembly

PH-210
A rigid mount pintle hook designed for trailers and semitrailers in doubles
and triples operations. Used for off- and over-the-road applications. Air 5.97˝ 7.06˝
cushioned snubber is designed to minimize the gap between the pintle 3/8˝ MIN
hook and the drawbar eye on vehicles with air systems. 2˝ MAX
Plunger/snubber force is developed by
the vehicle’s air system to reduce wear TM
and to provide shock absorption. One-hand operation and

automatic secondary lock 5.64˝ 10.71˝
Patent #7,431,321
.95˝
3.93˝
3/8˝ NPT PLUG .63˝

Air chambers
3/8˝ TO 1/4˝ NPT REDUCER
are available
for different
mounting 3.25˝ 8.5˝
widths; see Available with a DIA. 5.25˝
page 26.
Adjustable plunger
tethered lock pin.
(Replace “11” with “21”
MIN. * 2.62˝
in model number)
Cast steel alloy body is 3.00˝ 5.64˝
heat treated for increased
Weight: 38 lbs. (17.2 kg) strength and durability. 1.88˝
3.14˝
PH-210RA11 – Complete assembly includes a pintle hook, plunger,
air chamber, and mounting bracket. 3.25˝ .81˝ DIA.
6.50˝ TYP.
PH-210RN11 – Pintle hook without an air chamber, bracket or plunger. 4.25˝
PH-210RM11 – Pintle hook with plunger only. (4 REQ.)
For additional model numbers, see page 26.
The PH-210 can be operated with or without the air chamber. * Center hole not required if
For easier coupling, drawbar guides are available, see page 56. used without air chamber.
Capacities
18,000 lbs. Maximum Vertical Load
90,000 lbs. Maximum Gross Trailer Weight Replacement Parts
Drawbar Eye Dimensions RK-10545 LATCH KIT For PH-210RN21 use

RK-10545-1 LATCH KIT
2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. XB-10537 XB-S10647
XB-03104
• For off-road* applications, reduce the above maximum XB-03104
• Tested in accordance with SAE J847. XB-165945 Included with

XB-T-199
• For additional specification detail, refer to document XB-165945
number XL-PH340.
• Also available – PH210 Series with tethered lock pin. XA-04156
Replace “11” with “21” in model number.
Included with
* See definition on page 67 XA-11525 XB-165945
XB-T-199
The Holland PH-210 complies with NOM-0350-SCT-2-2010
Safety Specifications and Test Methods. XA-02608 Cylinder and Bracket Sub-Assembly

PH-310
and triples operations. Used for off- and over-the-road applications. Air 5.97˝ 7.06˝
cushioned snubber is designed to minimize the space between the pintle 3/8˝ MIN
hook and the drawbar eye on vehicles with air systems. 2˝ MAX
Plunger/snubber force is developed by TM

the vehicle’s air system to reduce wear
One-hand operation and 6.11˝ 10.71˝
and to provide shock absorption.
Patent #7,431,321
.95˝
3.93˝
3/8˝ NPT PLUG .63˝

Air chambers
are available
for different
mounting 7.75˝
Available with a
widths; see tethered lock pin. 3.25˝ MIN. * 3.75˝
page 26. (Replace “11” with “21”
in model number)
Adjustable plunger 1.88˝ .12˝
Cast steel alloy body is 6.11˝
heat treated for increased 3.75˝
Weight: 39 lbs. (17.7 kg) strength, durability, and 3.13˝
wear resistance.
PH-310RA11 – Complete assembly includes a pintle hook,
3.00˝
plunger, air chamber, and mounting bracket. .81 TYP
6.00˝
PH-310RN11 – Pintle hook without an air chamber, bracket or plunger. (6 REQ.)
PH-310RM11 – Pintle hook with plunger only.
For additional model numbers, see page 26. * Center hole not required if
The PH-310 can be operated with or without the air chamber. used without air chamber.
For easier coupling, drawbar guides are available, see page 56.
Capacities
20,000 lbs. (9,070 kg) Maximum Vertical Load Replacement Parts
RK-10545 LATCH KIT For PH-310RN21 use
Drawbar Eye Dimensions XB-10537 XB-S10647
XB-03104
XB-03104 XB-10537
capacities by 25% and use with a swivel-mount drawbar. XB-165945 Included with
XB-T-199
XB-165945
XA-04156
number XL-PH341.
• Also available – PH310 Series with tethered lock pin.
Replace “11” with “21” in model number.
Included with
XA-11525 XB-165945
* See definition on page 67 XB-T-199


PH-550
A rigid mount pintle hook designed for trailers and semitrailers in doubles 5.8˝ 6.7˝
.50˝ MIN.
and triples operations. Used for off- and over-the-road applications. Air 2.25˝ MAX.
cushioned snubber is designed to minimize the gap between the pintle
hook and the drawbar eye on vehicles with air systems.
Plunger/snubber force is developed by Secondary lock pin.

the vehicle’s air system to reduce wear 10.7˝
and to provide shock absorption. 9.9˝
.38˝
Cast steel
alloy body is
heat treated 3/8˝ to 1/4”
for increased NPT Reducer
3/8˝ NPT Plug
strength, 1.63˝ DIA.
durability, and
wear resistance.
5.0˝
Adjustable
plunger.
1.5˝ MIN. DIA.
.812˝ DIA. 3.12˝ MAX. DIA.
6 HOLES
9.88˝
The complete assembly includes a pintle hook, bullet, mounting bracket, CL
and air chamber. For pintle hook and plunger only, order PH-550-1. 2.38˝
2.00˝ BULLET
The PH-550 must be operated with an air chamber. For easier coupling, NOSE
drawbar guides are available; see page 56.
2.12˝
3.56˝
1.12˝ 2.50˝
7.25˝
Capacities
XB-05497 XB-05493
XB-05499
XB-05825 SUB-ASSY.
XA-05492
Drawbar Eye Dimensions XA-05490 XB-06134
XA-05491
2.38˝ to 3˝ I.D. with 1.63˝ to 1.75˝ diameter section. XB-05825
XB-196-3
XB-03104
Additional Information XA-05494
XB-03103
XB-05496 XB-03104
number XL-PH261.
XB-165945 XB-T-199 Included with

The Holland PH-550 complies with NOM-0350-SCT-2-2010 Safety

XA-05754
Specifications and Test Methods. XB-T-199
Included with
XB-165945
XA-11525

PH-400 and PH-400-H

and triples operations. Used for off- and over-the-road applications. Air PH-400 and PH-400-H
cushioned snubber is designed to minimize the gap between the pintle
hook and the drawbar eye on vehicles with air systems. 5.76˝ 7.00˝
.75˝ MIN .
2.25˝ MAX.
Automatic secondary lock Unique one-hand
for improved safety. latch operation.
Plunger/snubber 10.43˝
force is developed 11.75˝
by the vehicle’s
air system to
reduce wear and
to provide shock .94˝
absorption.
5.00˝
Cast alloy
Air chambers steel body is
are available heat treated
for different 3.8˝ to 1/4”
for increased NPT Reducer .63˝
mounting widths; strength, 3.8˝NPT Plug
see page 26. durability,
and wear
resistance.
PH-400 PH-400-H
Adjustable plunger 7.6˝ 7.6˝
3.8˝ 3.25˝ * 5.00˝
Weight: 48 lbs. (21.8 kg) DIA. MIN.
3.8˝
The complete assembly includes a pintle hook, plunger, air chamber, and mounting 6.62˝
3.25˝ DIA. MIN * 10.43˝ 6.38˝
2.50˝
10.43˝
bracket. For pintle hooks without an air chamber, bracket, or plunger, order PH-400-1 1.81˝
2.38˝ 2.19˝
or PH-400-1-H. 2.00˝
1.06˝ 5.00˝
2.12˝
The PH-400 and PH-400-H can be operated with or without the air chamber. For 5.00˝
2.38˝
easier coupling, drawbar guides are available, see page 56. 2.50˝ 3.00˝ .81˝ DIA. TYP.
5.00˝ .81˝ DIA. TYP. 6.00˝ (8 REQ.)
(8 REQ.)
* Center hole not required if

used without air chamber.
Capacities
RK-02536
• Tested in accordance with SAE J847. XB-165945 Included with

XB-T-199
number XL-PH244 or PH-247.
XA-04156
Included with
The Holland PH-400 and PH-400-H complies with NOM-0350-SCT-2-2010 XA-11525 XB-165945
Safety Specifications and Test Methods. XB-T-199

THIS PAGE INTENTIONALLY LEFT BLANK

PH-410
A rigid mount pintle hook designed for trailers and semitrailers in doubles 5.97˝ 7.06˝
and triples operations. Used for off- and over-the-road applications. Air 3/8˝ MIN
cushioned snubber is designed to minimize the gap between the pintle 2˝ MAX
hook and the drawbar eye on vehicles with air systems.
One-hand operation and 7.70˝ 11.79˝

and to provide shock absorption.
Patent #7,431,321
.94˝
4.94˝
3/8˝ NPT PLUG

3/8˝ TO 1/4˝
NPT REDUCER .63˝
Air chambers
are available 7.63˝
for different 5.00˝
mounting widths; Available with a 2.50˝
tethered lock pin.
see page 26. (Replace “11” with “21”
3.25˝ MIN. *
in model number)
Adjustable plunger Cast steel alloy body is
heat treated for increased 2.38˝
strength, durability, and 2.00˝
wear resistance. 5.00˝
2.13˝
plunger, air chamber, and mounting bracket.
PH-410RN11 – Pintle hook without an air chamber, bracket or plunger. .81˝ THRU 3.81˝
PH-410RM11 – Pintle hook with plunger only. (6 REQ.)
Capacities
RK-10545 LATCH KIT For PH-410RN21 use
XB-03104
XB-03104
XB-165945 Included with
• Tested in accordance with SAE J847. XB-T-199
XB-165945
XL-PH342. XA-04156
• Also available – PH410 Series with tethered lock pin. Replace
“11” with “21” in model number.
Included with
XA-11525 XB-165945
XB-T-199


PH-419 Patented (US D687,747S)

(US D687,748S)

A rigid mount pintle hook designed for trailers and semitrailers used in 6.02" 7.40"
(152.9mm) (188.1mm)
doubles and triples operations. Used for off- and over-the-road applications. X=
3/8˝ MIN
Air cushioned snubber is designed to minimize the gap between the pintle 0.5 in.[12.7mm]-12.0 in.[304.8mm]
2˝ MAX
SEE MOUNTING STRUCTURE CHART
FOR CORRESPONDING
(9.5mm MIN
PART NUMBERS
hook and the drawbar eye on vehicles with air systems. (Page 6)
50.8mm MAX) 12.17˝
(309.1mm)
and to provide shock absorption. One-hand operation and .94˝

(23.8mm)
Patent #7,431,321
5.13˝
(130.2mm)
3/8˝ NPT PLUG

.66˝
Air chambers
are available 6.62˝
for different Available with a (168.2mm)
5.00˝
mounting widths; tethered lock pin. (127.0mm)
(Replace “11” with “21” 2.50˝
see page 26. in model number) (63.5mm)
Ø 3.25˝
(82.6mm)
Adjustable plunger
Austenitic Manganese 7.88˝ 2.00˝
2.38˝
Weight: 42 lbs. (19 kg) steel alloy body (200.0mm) (50.8mm)(60.3mm)
for enhanced wear
5.19˝ 2.13˝
resistance. (131.8mm) (54.0mm)
plunger, air chamber, and mounting bracket.
PH-419RN11 – Pintle hook without an air chamber, bracket or plunger.
Ø .81˝ THRU
3.31˝
PH-419RM11 – Pintle hook with plunger only. (20.6mm) (84.1mm)
(6 REQ.)
Capacities
RK-10545 LATCH KIT RK-10545-1 LATCH KIT
(See FastLatch Note Below)
XB-03104
3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
XB-03104 XB-10537
• Tested in accordance with SAE J847. XB-T-199
XB-165945
XL-PH10409. XA-04156
• Also available – PH419 Series with tethered lock pin. Replace
“11” with “21” in model number.
Included with
XA-11525 XB-165945
XB-T-199


Air Chamber Assemblies and Mounting Kits
AIR
CHAMBER/
SELECT “X” AIR
PLUNGER
DIMENSION CHAMBER
ASSEMBLY PINTLE HOOK PART NUMBERS *****
FOR ROD
P/N WHEN
MOUNTING LENGTH
ORDERED
SEPARATELY
PINTLE HOOK ONLY PH-210RN PH-300-1 PH-300-R-1 PH-310RN PH-400-1 PH-400-1-H PH-410RN PH-419RN
PINTLE HOOK WITH
PH-210RM PH-310RM PH-410RM PH-419RM PH-550-1
PLUNGER ONLY
.63˝ - 2.50˝ 1.8˝ XA-02608* PH-210RA PH-310RA PH-400 PH-400-H PH-410RA PH-419RA
PINTLE HOOK
WITH COMPLETE 2.0˝ - 12.0˝ 12.0˝ XA-10198*** PH-210RF PH-310RF PH-410RF PH-419RF
AIR CHAMBER .38˝ - 2.25˝ 1.8˝ XA-02608* PH-300 PH-300-R
ASSEMBLY
.50˝ - 2.25˝ XA-09862** PH-550**
WHAT’S INCLUDED:
* Includes plunger, mounting bracket, and air chamber.
** For PH-550, includes bullet, mounting bracket, and air chamber (plunger is factory installed to the pintle hook).
*** Includes plunger and air chamber with cut-to-length rod.
XA-02608 XA-09862
XB-T-199 XB-T-199 Included with
XB-165945 XB-165945
XB-165945
XA-04156
XA-05754
XB-T-199
Included with Included with
XA-11525 XB-165945 XB-165945
XA-11525
XB-T-199
XA-10198
XB-166321
Cut-to-length
air chamber rod
XA-04156

COUPLERS
TITLE HERE
• FastLatch
• Rigid Mount Ball / Hook
Combination
• Swivel Mount
Rigid Mount
• Pin & Clevis
Swivel Mount
• Ball & Receiver Hitch
NoLube
• Air Cushioned
Coupler – Rigid Mount (Over-the-Road)
CP-400-H
A versatile rigid mount coupler used for trailers and equipment in over-
the-road and off-road applications. Especially useful when frequent and
automatic coupling is desired, and when the weight of the drawbar makes
it impractical to lift. The latch automatically closes and locks upon coupling.
Minimal lubrication 2˝
and maintenance is
Body is cast steel
required.
alloy.
8.12˝
Jaw is forged
steel alloy and
heat treated .78˝ DIA. (4 HOLES)
for strength
and wear
resistance.
Secondary
6.00˝ 8.50˝
lock for
4.50˝
added safety.

2.25˝
4.50˝
6.00˝
Capacities
Replacement Parts
XA-401-X3
2.50˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. SUB ASSY. XB-403
capacities by 25% and use with a swivel-mount drawbar. Springs
attach
• For additional specification detail, refer to document number here
XL-PH233.
XB-10109
XB-382
XA-402-X1
XA-404-X
XB-04473

Coupler – Rigid Mount (Over-the-Road)
CP-360
A rigid mount coupler used for trailers and equipment in over-the-road
and off-road applications. Especially useful when frequent and automatic
coupling is desired, and when the weight of the drawbar makes it
impractical to lift. The latch automatically closes and locks upon coupling.
2.24˝
Body is cast steel alloy and

heat treated for strength. Jaw is cast steel
alloy and heat
treated for
strength and
To ensure long wear resistance.
10.13 ˝
life, grease
fittings are
provided for 10.00˝
easy lubrication. 8.50˝
1.50˝ 5.50˝
2.75˝
Secondary lock for

added safety. 2.38˝
Bottom handle pull is 6.44˝
primary lock release. 8.75˝
4.75˝

.84˝
.78˝ DIA.
6 HOLES
Capacities
Replacement Parts
capacities by 25% and use with a swivel-mount drawbar. XB-T-33-A
• For additional specification detail, refer to document number XB-T-377 XA-393 XB-5
XL-PH231. XA-01154
XB-T-377 XB-T-20-2
XB-767
XA-394 XB-3094
XA-07760
XA-T-88
XA-392
XA-T-88
XA-06101
XB-767

Coupler –Rigid and Swivel Mount (Over-the-Road)
CP-740 and CP-730

Application Mounting Dimensions (CP-740)
A very strong, specialized coupler used for trailers and equipment in
over-the-road and off-road applications. Especially useful when frequent
and automatic coupling is desired. The jaw automatically closes and
locks when the drawbar eye is inserted.
CP-740 Rigid Mount Hooded guide directs 12.75˝

the drawbar into the
Primary lock release 1.81˝
jaw for easy coupling.
mechanism.
Secondary lock
release mechanism
automatically locks
for added safety. 8.44˝
9.69˝
To ensure long life,

grease fittings (3) 13.0˝
are provided for 10.88˝
easy lubrication. Jaw is forged steel 9.38˝
4.69˝
alloy and heat treated 6.50˝
Body is cast steel alloy and for strength and wear 3.25˝
heat treated for strength resistance.
and wear resistance.
Weight: 70 lbs. (32.7 kg) 5.25˝
2.63˝
Capacities
20,000 lbs. (9,070 kg) Maximum Vertical Load .78˝ DIA.
100,000 lbs. (45,360 kg) Maximum Gross Trailer Weight THRU (6 REQ.)

3˝ I.D. with a 1.63˝ diameter section.
Replacement Parts
XB-767
XB-21-S-187-1250
number XL-PH268.
* See definition on page 67 XB-21-S-312-1250
XB-T-20-2
XA-11042 XA-732
CP-730 Swivel Mount
The CP-730 is an on- and off-road XB-403
XA-T-88
coupler featuring the CP-740 XB-06150
coupler with a lubricated, XB-21-S-500-1000 XB-T-60
swivel mount housing and XA-736
XA-01740
spring-loaded lock pin.
XA-06101
When the spring-loaded XA-05739
XB-767
lock pin is engaged, the XB-03731
coupler remains rigid XA-05738 XA-05740
when coupling, or when
towing a trailer equipped
with a swivel-style drawbar.
Simply disengage the lock pin to return
the coupler to swivel mode.
Please contact SAF-HOLLAND for more information.

Pin and Clevis Coupler – Swivel Mount (Over-the-Road)
PH-990ST71 (Rubber Cushioned)

A special frame-mount, swivel style pin and clevis coupler featuring a 23.28˝
“fish mouth” head and rubber cushions for shock absorption. Designed
for extreme-duty in over-the-road and off-road applications.
8.00˝
Easy to maintain and 4.00˝
requires no lubrication.
2.28˝
‘Fish-mouth’ 5.53˝
clevis head 10.28˝
helps guide the 9.88˝
4.94˝
drawbar into 8.00˝
position for 4.00˝
easier coupling 9 HOLES
1.50˝ FOR .75˝
4.43˝ DIA.
Internal rubber 2.00˝ BOLTS
cushions provide Wear plates
shock absorption. in fish mouth
18.23˝
provide a
replaceable
wear surface 13.80˝
and minimize
drawbar ‘slop’.
For added security, a safety pin
serves as a secondary lock.
The clevis pin is forged steel alloy 11.61˝ 11.67˝
7.38˝
that is heat treated for strength,
durability, and wear resistance.
2.75˝
DIA.
Capacities
Replacement Parts
XB-T-993 RK-T-551
3˝ I.D. with a 1.63˝ diameter section. XB-T-992
Parts required for PH-990ST71
XA-10287 May also be used with PH-T-990
Additional Information XB-T-61
(4 REQ.)
XB-T-307 (6 REQ.)
XA-10008 XB-770-1
• For off-road* applications, reduce the above maximum (2 REQ.)
XB-T-993 XA-T-361 XB-T-362 XA-T-317-8
• For additional specification detail, refer to document XB-T-993 XA-10286
XB-10738 XA-T-361
number XL-PH219. (4 REQ.) XB-TLN-1000-7
XB-780-1
XB-T-993-1
XB-0437
* See definition on page 67 XB-T-306 (6 REQ.)
RK-10291
XA-10008 XA-10287
(2 Req.) XB-T-61
XB-10738 (4 Req.)
(4 Req.)
XB-T-993

Ball & Receiver Hitch – Rigid Mount (Over-the-Road)
BH-50 (Includes Ball and Receiver Assemblies)

This ball hitch is ideal for heavy-duty over-the-road applications
6.75˝
where high articulation (up to 30°) in all directions is required, and in 5.0˝
1.0˝
applications where the vehicle and trailer remain coupled. The BH-50 DIA.
13.5˝
minimizes chucking. 1.75˝
17.0˝ 10.0˝ 3.25˝ 4.12˝
6.5˝
8.5˝
Top-mounted adjustment
ratchet provides easier Weld the receiver
coupling, uncoupling, and to the trailer frame 1.75˝ 1.06˝ DIA .
slack adjustment. or tongue. 4 MOUNTING HOLES
The release includes

a compression spring 6.0˝
to aid in uncoupling. The tethered 3.0˝
safety pin acts as
a secondary lock. .5˝ .5˝
Steel bolt-on 3.25˝ 7/16˝ min .
frame for ease 19.75˝ TONGUE
of installation NOTE: A minimum of 35 linear STRUCTURE
and strength. The 5˝ diameter steel alloy ball inches of weld of the size
noted is required to develop
is precision machined, and heat .5˝ sufficient hitch strength.
treated for superior strength,
durability and wear resistance. 2.5˝
5.8˝
Weight: 135 lbs. (61.2 kg) 7/16˝ min.

WELD ACROS S
7/16˝ min .
BOTH SIDES
THE BOTTO M
Replacement Parts
Capacities
RECEIVER ONLY
8,000 lbs. (3,630 kg) Maximum Vertical Load XA-02235
XA-04430
80,000 lbs. (36,290 kg) Maximum Gross Trailer Weight XB-02724 XB-21-S-250-1250
XB-PWM-38-78
XA-05264
XB-C-375-C-150
XB-PWM-38-78
number XL-PH254. XA-02240
XA-02234
XB-02745 D
XB-H-38
XB-639
XA-02241 XB-3547
XA-02721
BALL ONLY SUB-ASSY.
XA-04108
XA-05263
XA-04337
RK-06683
XB-02724 XB-21-S-250-1250
XA-05264 XB-PWM-38-78
XA-05263
XB-05514
XA-04337

COUPLINGS
INDUSTRIAL / GSE
• Couplers
• E-Hitch
• Lunettes
Coupler – Rigid Mount (Industrial / GSE)
CP-400-GSE and CP-400-CA

Strong rigid mount couplers that are designed for industrial material
handling and ground support applications. The CP-400-GSE and CP-400-CA
are useful where coupling is frequent, and quick and easy coupling release
is desired. The latch automatically closes and locks upon coupling.
The CP400-CA features an integral roller which accommodates a cable
release system to open the coupler from the driver’s position.
Lubrication and 2˝
maintenance are minimal. CP-400-CA
Cable
Release
Primary lock only;

no secondary
lock.
8.12˝
Body is cast
steel alloy.
.78˝ DIA. (4 HOLES)

Jaw is forged
alloy steel and
heat treated
for strength,
6.00˝ 8.50˝
toughness, and
durability. 4.50˝
4.50˝
Capacities 6.00˝
30,000 lbs. (13,610 kg) Maximum Drawbar Pull
Replacement Parts
IMPORTANT: There is no secondary lock mechanism.
This coupler is not designed for over- XA-401-X1
SUB ASSY.
the-road applications.
XA-211 XB-403
Drawbar Eye Dimensions XB-708

2.50˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section. Springs
attach here
• For more product specific mounting information and
operating instructions, refer to SAF-HOLLAND document
XB-06181
number XL-PH348 or XL-PH232.
XB-382
XB-10109
XA-402-X1
XA-404-X
XB-04473

XA-T-150-AF Bolt-On and CP-T-150-S02986 Weld-On

Automatic rigid mount coupler designed for a variety of industrial
material handling applications. Useful in instances where coupling is
frequent and quick coupling is desired. The latch automatically closes 5˝
and locks upon coupling.
Available without pre-drilled mounting holes for weld-on installation.
Order CP-T-150-S02986.
10.94˝
Body is cast
steel alloy.
3.13˝
1.5˝
3.38˝ .62˝ R. 7.19˝
1.25˝
6.66˝
3.5˝ 5.0˝
1.75˝
Bottom pull lock
release mechanism.
Jaw remains open upon lock release
and automatically closes and locks 1.5˝
when drawbar is inserted. 3.38˝
Weight: 15 lbs. (6.8 kg) .75˝
.53˝ DIA.
4 HOLES
.38˝ *See Note Below
Capacities for both Coupler and Coupler Ring XA-T-150-AF CP-T-150-S02986
50 lbs. (23 kg) Maximum Vertical Load NOTE: Maximum of 16.76 linear inches of .38˝
15,000 lbs. (6,800 kg) Maximum Drawbar Pull fillet weld required to develop rated capacity.
Replacement Parts
IMPORTANT: There is no secondary lock mechanism.
This coupler is not designed for over-the-
road applications. RK-T-150-S02986 Jaw Replacement Kit
XA-T-2
XB-04847
Maximum 1˝ diameter cross-section.
• For more product specific mounting information and XB-646
(2 Req.)
operating instructions, refer to SAF-HOLLAND document
number XL-PH235.

MODELS
EH-3050
• 30,000 lb. (13,610 kg) or 50,000 lb. (22,680 kg) Maximum
Drawbar Pull, depending on mounting fasteners
• 500 lb. (227 kg) Maximum Vertical Load
• Weight: 21.5 lbs. (9.8 kg)

2.25˝ (57mm) to 3.0˝ (76mm) I.D. with maximum 1.75˝ (44mm)
diameter section.
FLEX-MOUNT BOLT-ON FLANGE

For original equipment installations or retro-fit /
replacement of existing couplings.
The unique flex-mount bolt pattern is compatible with:
• Obsolete HOLLAND E-Hitch models EH-20 and EH-40
• HOLLAND pintle hook mounting patterns, including PH-10RP, NEW
PH-T-60-AOL-8, PH-30RP, BH-200RN and BH-50mmRN
EH-HD
• 50,000 lb. (22,680 kg) Maximum Drawbar Pull
• 1,000 lb. (454 kg) Maximum Vertical Load
• Weight: 27 lbs. (12.2kg)

2.25˝ (57mm) to 3.0˝ (76mm) I.D. with maximum 1.75˝ (44mm)
diameter section.
UNIVERSAL BOLT-ON FLANGE

For original equipment installations or retro-fit / replacement of
existing couplings.
Large mounting flange accommodates a broad range of fleet or OEM
specified mounting patterns including SAE and metric dimensioning.
• The user’s required mounting pattern, fastener sizes, and rated
NEW
capacities must be reviewed and approved by SAF-HOLLAND
• Bolt holes are drilled to specification by SAF-HOLLAND
• Standard mounting patterns or custom mounting patterns are
also available. Contact SAF-HOLLAND for information.
WELD-ON FLANGE
For original equipment installations or retro-fit /
replacement of existing couplings.
Full perimeter weld required for installation
• Bolt holes or holes for plug welding are not permitted

FEATURES
S
AUTO-LOCK PIN NEW
OPTIONAL AUTO-LOCK PIN
• Available option for EH-3050 and EH-HD models IMPACT PROTECTION

• Locks automatically upon closing; then unlocks with
ith
a 1/8-turn of the handle when opening
• Auto-lock pins and non-lock pins are interchangeable
between the EH-3050 (2014 and later) and EH-HD models
• Simple and efficient lock design – the keyway is cast into
the pin and the key is cast into the frame
Pin
Guard
DURABLE Internally
Mounted
• Cast carbon steel alloy construction including frame, pin Spring
and handle
• Proprietary, precision formed springs are tested to over
1 million compression cycles
• Pins are heat-treated and through-hardened for optimum
wear resistance
1/8 Turn for
‘Hold-Open’
Position
CORROSION PROTECTION
Keyway
• Frames receive a 6-stage phosphate pre-treatment prior Key
to an epoxy power coat finish. Standard colors are safety
yellow or white. Red is optionally available.
• Pins, springs and handles receive a thermal diffusion zinc
coating from a dry, chromate free coating process. This
process coats both the outer and inner surfaces of the pin.
• Pins are open on the bottom so that water, ice and debris
does not accumulate in the pin.
HOLD-OPEN FEATURE
A standard feature for all non-lock and auto-lock pins. When
the pin is raised to its full open position, a 1/8-turn of the
handle will engage the hold-open position of the key / keyway.
INTERCHANGEABLE HANDLE SETTINGS

All EH models are shipped with handles mounted in the fold-
down setting. To change to the other setting, simply remove
the handle, turn 180°, and reinstall.
FOLD-DOWN SETTING RIGID SETTING

Allows the handle to fold down The handle remains
towards the rear of the frame. rigid and will not fold.

EH-3050 Flex-Mount Bolt-On Flange

OVERALL DIMENSIONS
2.125˝
15.53˝ (54)
(394.4)
3.50˝
(88.9)
12.42˝
COMPLETE EH-3050 ASSEMBLY PART NUMBERS (315.4) Ø.53˝
12.42˝ 6X(13.5)
With Standard Non-Lock Pin (315.5)
EH-3050-13 Safety Yellow (Standard Color) 3.38

(85.7)
EH-3050-14 White (Standard Color) 9.31˝
3.50˝
1.75˝
2X (88.9)
(236.4) 2X(44.5)
EH-3050-17 Red (Optional Color)
With Optional Auto-Lock Pin
EH-3050AL-13 Safety Yellow (Standard Color) Ø.66˝
2X (16.7)
EH-3050AL-14 White (Standard Color) 3.93˝ 3.50˝
(99.9)˝ (88.9)
5.68˝ 5.0˝
EH-3050AL-17 Red (Optional Color) (144.3) (127)
VARIABLE FOUR (4) BOLT MOUNTING PATTERN

Use only Grade 8 bolts.
Two 1/2˝ bolts are required for all installations in either the top or middle rows.
Two bolts are required in the bottom row.
For 30,000 lb. (13,610 kg) MDBP installation, use upper slot sized for 1/2˝ bolts.
For 50,000 lb. (22,680 kg) MDBP installation, use lower slot sized for 5/8˝ bolts.
EH-3050 and EH-HD

Replacement Parts
EH-HD EH-3050 STANDARD OPTIONAL HANDLE

NON-LOCK PIN AUTO-LOCK PIN
Frames RK-11438 RK-11439 RK-11789 RK-11440
Not Sold Slotted Pin, Spring, Pin and Spring Assembly, Handle, Bolt,
Separately Washer Set Bolt, Locknut Bolt, Locknut Locknut

EH-HD Universal Bolt-On Flange and Weld-On Flange

OVERALL DIMENSIONS
2.125˝ 16.68˝
(54) (423.7)
13.38˝
(339.9)
7.32˝
(186.0) 13.57˝
10.27˝ (344.7)
(260.9) 8.48˝
(215.4)
2.06˝
(52.3)
4.27˝ 3.63˝
(108.5) (92.1)
6.08˝ 6.50˝
(154.5) (165.1)
MODEL PIN STYLE MOUNTING COLOR C

–
EH-HD XX XX XX
13 - Safety Yellow (standard)
‘Leave Blank’ for standard Non-Lock Pin See Mounting A
Pattern Codes 14 - White (standard) D
Add ‘AL’ for optional Auto-Lock Below
17 - Red (optional)
Part Number Example:

EH-HDAL-0013 = EH-HD Model with optional Auto-Lock Pin (AL), Weld-On Mounting (-00), Safety Yellow Color (13)
B
MOUNTING PATTERN CODES RATED CAPACITIES
MAXIMUM MAXIMUM
WELD-ON CODE DRAWBAR PULL VERTICAL LOAD
00 Full perimeter weld (see EH-HD Owner’s Manual XL-PH20007UM for welding specification) 50,000 lbs. (22,680 kg) 1,000 lbs. (454 kg)
BOLT-ON DIMENSIONS BOLT SIZE

CODES* ‘A’ ‘B’ ‘C’ ‘D’
01 1.75˝ (44.5mm) 3.38˝ (85.7mm) .50˝ (12.7mm) .50˝ (12.7mm) 30,000 lbs. (13,608 kg) 1,000 lbs. (454 kg)
04 4.50˝ (114.3m) 4.50˝ (114.3mm) .75˝ (19.0mm) .75˝ (19.0mm) 50,000 lbs. (22,680 kg) 1,000 lbs. (454 kg)
* Large mounting flange is designed to accommodate a broad range of fleet or OEM speficied mounting patterns including SAE and metric dimensioning.
Contact SAF-HOLLAND for more information regarding currently available patterns or for custom fleet/OEM requested mounting patterns.

Lunettes – Weld-on Lunettes (Industrial / GSE)
DB-010EJ1 and DB-020FK1

• Forged, one-piece steel alloy lunettes
• Non-hardened/non-painted for weldability
• Intended for industrial truck and GSE applications
• Tested in accordance with SAE J847
DB-010EJ1 DB-020FK1
Weld onto 2˝x 4˝ (11 Forged steel universal

gauge) structural tubing weld-on lunette
Rigid Tongue Trailers Hinged Tongue Trailers

500 lb. Maximum Vertical Load Weight
Capacities lb. kg lb. kg lb. kg
DB-010EJ1 GTW 10,000 4,536 20,000 9,072
15 6.8
2.88˝ (73.2mm) Eye VERTICAL 2,000 907 500 227
DB-020FK1 GTW 20,000 9,072 40,000 18,144
22 10
3˝ (76.2mm) Eye VERTICAL 4,000 1,814 500 227
• For additional specifications, refer to document XL-DB124.
Mounting Dimensions
DB-010EJ1 DB-020FK1
See note*
4.32˝ 2.25˝
3.75˝ 1.69˝
.91˝
See note**
5.9˝ .38˝
2.75˝
2.5˝ 3.00˝
1˝ DIA.
1.63˝
DIA.
2.88˝ 6.25˝
4.88˝
*NOTE: A minimum of 12˝ linear inches of .38˝ weld on **NOTE: 8.5˝ of linear weld .38˝ bevel groove weld
2˝x 4˝ (11 gauge) structural tubing required to (3˝x 1.25˝ bar used) required to obtain ratings.
obtain ratings.

DRAWBAR EYES &
TITLE HERE
HINGE ASSEMBLY
• FastLatch
• Compatibility Chart
• Combination Ball / Hook
• Rigid Mount – Bolt-On/Weld-On
• Rigid Mount
• Air Cushioned
• Swivel Mount
• Swivel Mount
• NoLube
• Drawbar Hinge Assembly
• Air Cushioned
Drawbar Eye Compatibilty
NON-ROAD
IND/GSE USE ONLY
R R R R R R R R R R R
DRAWBAR NUMBER DB-010EJ1 DB-020FK1 DB-1250-3 DB-1228-1 DB-1238 DB-030DQ1 DB-1235-1 DB-1235-3 DB-040DQ1 DB-1245-1 DB-1249-49
Max Vertical Load 2,000 4,000 3,000 4,000 4,500 6,000 7,000 7,000 8,000 8,000 9,000
GTW 10,000 20,000 15,000 20,000 22,000 30,000 35,000 35,000 40,000 40,000 45,000
GTW w/500 lbs. Vertical 20,000 40,000 50,000 60,000 70,000 38,000 90,000 90,000 60,000 90,000 85,000
Eye I.D. Diameter 2.5˝ 3˝ 2.5˝ 2.5˝ 3˝ 2.5˝ 3˝ 3˝ 2.5˝ 2.38˝ 3˝
PINTLE HOOK MODEL MAX GTW
PH-10RP R 10,000 X X X X X X X X X X X
BH-200RN R 20,000 X X X X X X X X X X X
BH-50mmRN R 20,000 X X X X X X X X X X X
PH-T-60-AOS-L-8 S 18,000 X X X X X X X X X X X
PH-T-60-AOL-8 R 30,000 X X X X X X X X X X X
PH-30RP R 30,000 X X X X X X X X X X X
PH-30SA S 30,000 X X X X X X X X X X X
PH-30SB S 30,000 X X X X X X X X X X X
PH-300 / 300-R R 72,000 X X X X X X X X X X X
PH-210 R 90,000 X X X X X X X X X X X
PH-310 R 100,000 X X X X X X X X X X X
PH-400 / 400-H R 100,000 X X X X X X X X X X X
PH-410 R 100,000 X X X X X X X X X X X
PH-419 R 100,000 O X O O X O X X O O X
PH-550 R 100,000 X X X X X X X X X X X
PH-760 S 49,000 O O O O X O X X O O X
PH-775 S 100,000 O O O O X O X X O O X
COUPLER MODEL
CP-400-H R 30,000 X X X X X X X X X X X
CP-360 R 52,000 X X X X X X X X X O X
CP-730 S 100,000 O O O O O O X X O O X
CP-740 R 100,000 O O O O O O X X O O X
PH-990ST71 S 100,000 O O O O O O X X O O X
INDUSTRIAL / AVIATION GROUND SUPPORT EQUIPMENT (Non-Road)
CP-400-GSE / CA R 30,000 X X X X X X X X X X X
EH-3050 R 50,000 X X X X X X X X X X X
EH-HD R 50,000 X X X X X X X X X X X
R = RIGID X = COMPATIBLE
S = SWIVEL O = NOT COMPATIBLE
This information reflects only the dimensional compatibility between HOLLAND lunettes (eyes)
and HOLLAND pintle hook horns, coupler jaws and clevis pins.
This information is not an assurance of operational or application compatibility between coupling
products. Compatibility of the complete ‘coupling system’ requires additional information.
Please go to the Reference Sections of this catalog (page 61) for helpful information, including:
• Safety Information
• Coupling System Selection
• Operating Conditions
• Mounting Information

Drawbar Eye Compatibilty
S S R S S R R R R
DB-045BS1 DB-045BW1 DB-610-30 DB-060FQ1 DB-1407-S DB-1407-SE DB-1407-L-1 DB-1407-S-1 DB-1407-SE-1 DB-1400 DB-1400AC DB-1422 DB-100FQ1
9,000 9,000 9,000 15,000 500 500 16,000 16,000 16,000 18,000 18,000 18,000 20,000
45,000 45,000 45,000 60,000 40,000 34,000 85,000 85,000 85,000 90,000 90,000 90,000 100,000
85,000 85,000 85,000 90,000 40,000 34,000 120,000 120,000 120,000 120,000 120,000 120,000 125,000
2.38˝ 2.38˝ 3˝ 3˝ 2.38˝ 2.38˝ 2.38˝ 2.38˝ 2.38˝ 2.38˝ 2.38˝ 2.38˝ 3˝
PINTLE HOOK MODEL MAX GTW
X X X X X X X X X X X X X
X O O X O O X X X X X X X
O O X X O O O O O O O O X
O O O X O O O O O O O O X
O O O X O O O O O O O O X
COUPLER MODEL
O O X X O O O O O O O O X
O O X O O O O O O O O O O
O O X O O O O O O O O O O
O O O O O O O O O O O O O
INDUSTRIAL / AVIATION GROUND SUPPORT EQUIPMENT (Non-Road)
R = RIGID X = COMPATIBLE
S = SWIVEL O = NOT COMPATIBLE
This information reflects only the dimensional compatibility between HOLLAND lunettes (eyes)
and HOLLAND pintle hook horns, coupler jaws and clevis pins.
This information is not an assurance of operational or application compatibility between coupling
products. Compatibility of the complete ‘coupling system’ requires additional information.
Please go to the Reference Sections of this catalog (page 61) for helpful information, including:

Drawbar Eyes – Rigid Mount, Bolt-On Shank
DB-1250-3
• Forged, one-piece steel alloy drawbar
• Heat treated for strength
• I.D. of eye is induction hardened for wear resistance
DB-1250-3
Replacement Parts
XB-T-60
1.50˝ O.D. shank.
XB-T-9N
XA-T-56

500 lb. Max. Vertical Load Weight
DB-1250-3 GTW 15,000 6,804 50,000 22,680
9 4
2.5˝ (63.5mm) Eye VERTICAL 3,000 1,361 500 227
• Not recommended for swivel mount applications.
• When mounted, high clamp force is required to provide rated capacities.
• For off-road* applications, reduce published capacities by 25% and use with swivel-mount coupling.
Mounting Dimensions
DB-1250-3
9.12˝
1.50˝ 1.50˝- 6 UNC-2A
THREAD
5.50˝
DIA.
1.25˝ 1.50˝ 2.50˝ 1.53˝

DIA.
.19˝x 45° *
3.12˝ 3.25˝

Drawbar Eyes – Rigid Mount, 4 Bolt Flange
DB-040DQ1, DB-060FQ1 and DB-100FQ1

DB-040DQ1 DB-060FQ1
DB-100FQ1

500 lb. Max. Vertical Load Dimension Grade 8 Weight
Capacities lb. kg lb. kg ‘A’ Fastener Size lb. kg
DB-040DQ1 GTW 40,000 18,144 60,000 27,216
0.656˝ 5/8˝ 14 6.4
2.5˝ (63.3mm) Eye VERTICAL 8,000 3,629 500 227
DB-060FQ1 GTW 60,000 27,216 90,000 40,824
0.780˝ 3/4˝ 19 8.6
3˝ (76.2mm) Eye VERTICAL 15,000 6,804 500 227
DB-100FQ1 GTW 100,000 45,360 125,000 56,700
0.910 7/8˝ 19 8.6
3˝ (76.2mm) Eye VERTICAL 20,000 9,072 500 227
• IMPORTANT – DO NOT WELD – Not designed for welded installation.
• Use only new Grade 8 bolts and Grade C locknuts
• For additional specifications, refer to documents XL-DB126 and XL-DB125.
Mounting Dimensions
DB-040DQ1 DB-060FQ1 & DB100FQ1
6.83˝
6.13˝
3.71˝ ‘A’ 4.50˝
3.38˝ 2.25˝
2.25˝ .87˝
3.00˝ .75˝
2.25˝
1.25˝x 1.5˝
DIA. 1.63˝ 2.25˝
6.62˝ DIA.
4.50˝ 6.38 ˝
1.63˝ 4.50 ˝
1.44 ˝
2.5˝ DIA.
.63˝ ‘A’ 4.50˝

.71˝
6.38˝
1.25˝x 1.5˝
1.63˝
DIA. DIA.
6.00˝

Drawbar Eyes – Rigid Mount, Bolt-On, Rectangular & Square Shank
DB-1228-1, DB-1238, DB-1245-1, DB-1235-1 & DB-1235-3

• Forged, one-piece steel alloy drawbars
• I.D. of eye is induction hardened for wear resistance.
DB-1228-1 DB-1245-1
DB-1238 DB-1235-1
DB-1235-3

SAF-HOLLAND testing confirms that the type of drawbar mount for a rigid When used in hinged tongue
tongue trailer can affect the vertical load capacity of the tongue/drawbar trailer applications where
assembly due to the bolt loads associated with the particular mounting maximum vertical load cannot
type (reference chart below). exceed 500 lbs. (227 kg).
TONGUE
Hinged tongue capacities are not
affected by over/under-tongue
TONGUE
mounting.
Over-Tongue Mount Under-Tongue Mount

Vertical rating may be increased by
50% from over-tongue mount.

DB-1228-1 GTW 20,000 9,072 GTW 20,000 9,072 GTW 60,000 27,216
2.5˝ ID (63.5mm) Eye VERTICAL 4,000 1,814 VERTICAL 6,000 2,722 VERTICAL 500 227
DB-1238 GTW 22,000 9,979 GTW 22,000 9,979 GTW 70,000 31,752
3˝ ID (76.2mm) Eye VERTICAL 4,500 2,041 VERTICAL 6,750 3,062 VERTICAL 500 227
DB-1245-1 GTW 40,000 18,144 GTW 40,000 18,144 GTW 90,000 40,824
2.38˝ ID (60.5 mm) Eye VERTICAL 8,000 3,629 VERTICAL 12,000 5,433 VERTICAL 500 227
DB-1235-3 GTW 35,000 15,876 GTW 35,000 15,875 GTW 90,000 40,824
DB-1235-1 GTW 35,000 15,876 GTW 35,000 15,876 GTW 90,000 40,824
• SAF-HOLLAND recommends that all bolt holes be used.
• Use only Grade 8 bolts and Grade C locknuts.
• IMPORTANT – DO NOT WELD – Not designed for welded installation.

Drawbar Eyes – Rigid Mount, Bolt-On, Rectangular & Square Shank
Mounting Dimensions
DB-1228-1
DB-1238
17.25˝
.656˝ DIA. HOLES
A 1.50˝ 3˝
2.0˝ .75˝ E
TYP.
B 4.50˝
Dimensions Weight
A B E lb. kg
DB-1228-1 2.50˝ 1.25˝ x 1.50˝ Oval 1.25 20 9.1
DB-1238 3.0˝ 1.63˝ Round 1.62˝ 26 11.8
Mounting Dimensions
DB-1245-1
DB-1235-1
DB-1235-3
17.25˝
.656˝ DIA. HOLES
D
A 1.50˝
2.0˝
C E
TYP.
1.63˝ B
DIA.
Dimensions Weight
A B C D E lb. kg
DB-1245-1 2.38˝ 6.0˝ 0.75˝ 3.0˝ 3.0˝ 41 18.6
DB-1235-3 3.0˝ 6.5˝ 0.75˝ 3.0˝ 3.0˝ 41 18.6
DB-1235-1 3.0˝ 6.0˝ 0.82˝ 3.12˝ 3.12˝ 42 19.1

Drawbar Eyes – Rigid Mount, Weld-On
DB-1400 and DB-1422

DB-1400 DB-1422
Use with 3˝ channel or rectangular
tube mounting configuration.
Use with 3˝ channel

or square tubing.
Weld tabs can be heated and

bent ± 10° to accommodate
installation requirements.
Designed for 20° minimum
and 60° maximum angle. Designed for 30° angle.

DB-1400 GTW 90,000 40,824 120,000 54,432
14 6.4
2.38˝ (60.5mm) Eye VERTICAL 18,000 8,165 500 227
DB-1422 GTW 90,000 40,824 120,000 54,432
11 5
2.38˝ (60.5mm) Eye VERTICAL 18,000 8,165 500 227
• For off-road* applications, reduce the published capacities by 25% and use with a swivel-mount coupling.
• For additional specifications, refer to documents XL-DB113 and XL-DB116.
Mounting Dimensions
5.63˝
1.63˝ 1.63˝
1.63˝ DIA.
2.38˝ DIA. 2.38˝ DIA.
1.69˝ 1.69˝
2.88˝
26 LINEAR 2.75˝
INCHES
2.25˝
4.0˝
32 LINEAR
INCHES
.38˝
5.62˝ .38˝
1.56˝ 7.50˝
45 °
3.5˝
WILL
ACCEPT
20°- 60° CHANNE L
SPREAD
2.06˝
30°

Drawbar Eyes – Rigid Mount, Weld-On, ‘Air-Cushioned’
DB-1400AC Series: DB-1400AC-1, DB-1400AC-2, DB-1400AC-3, DB-1400AC-4

• Forged, one-piece steel alloy drawbar Mounting Dimensions
• Tested in accordance with SAE J847 1.63˝
DIA.
Use with 3˝ channel

or square tubing.
26 LINEAR
INCHES 2.7˝
Designed for 20° minimum
and 60° maximum angle.
.38˝
Snubber force is developed

by the vehicle’s air system to 1.56˝
provide shock absorption.
5.7˝
3.50˝ WILL ACCEPT 20° TO 60°

CHANNE L SPREAD

DB-1400AC GTW 90,000 40,824 120,000 54,432
14 6.4
2.38˝ (60.5mm) Eye VERTICAL 18,000 8,165 500 227
• For off-road* applications, reduce the published capacities by
25% and use with a swivel-mount coupling.
* See deefinition on page 67
Replacement Parts B
XA-1403
Drawbar includes A
a plunger and
turnbuckle
XB-165945
A = Distance required to mount air chamber
XA-1404-1 (12˝)
B = Rod length
XA-04297 XA-1404-2 (8˝)
XA-1404-3 (7˝) MODEL* DIM “A” DIM “B”
XA-1404-4 (10˝) DB-1400AC-1 15.25˝ 12.00˝
DB-1400AC-2 11.25˝ 8.00˝
DB-1400AC-3 10.25˝ 7.00˝
DB-1400AC-4 13.25˝ 10.00˝
*Air cylinder is NOT included; order separately.

Drawbar Eyes – Swivel Mount, Bolt-On Shank
DB-1407

500 lb. Max. Vertical Load
Capacities lb. kg lb. kg
DB-1407-L-1/-S-1/-SE-1 GTW 85,000 38,556 GTW 120,000 54,432
2.38˝ (60.5mm) Eye VERTICAL 16,000 7,258 VERTICAL 500 227
• For off-road* applications, reduce the published capacities by
25% and use with a rigid-mount coupling.
Mounting Dimensions Replacement Parts

A 3.75˝ 2.38˝
DIA.
B
C 1.56˝
D**
DIA.
5.13˝
2.00˝ DIA. .31˝ R
(2.03˝ HOLE SIZE) 6.50˝
1.63˝
**CHAMFER WEIGHT
MODEL NO. A B C
D lb. kg
DB-1407-S-1* 11.62˝ 9.4˝ 9.3˝ .38˝ x 45° 24 10.9

XB-T-318
DB-1407-L-1* 12.25˝ 10.1˝ 9.9˝ .38˝ x 45° 25 11.3
DB-1407-SE-1* 13.13˝ 10.9˝ 10.8˝ .38˝ x 45° 26 11.8 XB-05788
XB-05789
* Includes drawbar washer, nut and retaining ring.
** The mounting surface must have adequate chamfer, as
shown above, so that the drawbar mounts flush with the
mounting surface.

Drawbar Eyes – Swivel Mount Assembly (with Rubber Cushion)
DB-1407-SE and DB-1407-S Weld-On Assemblies

• Steel housing features replaceable rubber bushings
Hinged Tongue Trailers

Capacities lb. kg lb. kg
DB-1407-SE GTW 34,000 15,422
50 22.6
2.38˝ (60.5mm) Eye VERTICAL 500 227
DB-1407-S GTW 40,000 18,144
45 20.4
2.38˝ (60.5mm) Eye VERTICAL 500 227
• Rubber cushioned housings are recommended for hinged tongue trailer applications only.
• For off-road* applications, reduce the published capacities by 25% and use with a swivel-mount coupling.
• For additional specifications, refer to documents XL-DB119 and 118.
Mounting Dimensions
DB-1407-SE DB-1407-S
Minumum of 34 linear inches Minimum of 34 linear inches
of .38˝ fillet weld is required of .38˝ fillet weld is required
to develop rated capacity. .38˝ to develop rated capacity.
.38˝
13.13˝ 3.75˝ 11.62˝ 3.75˝
9.5˝
11.0˝ 1.56˝
1.56˝
DIA.
DIA.
5.50˝ 5˝ 2.38˝ 1.63˝

2.38˝ DIA. DIA.
DIA. DIA. 1.63˝
.44˝ .37˝
9.63˝ 6.50˝ 8.25˝ 6.50˝
.38˝
Replacement Parts XB-05789
XB-05789
XA-05809 XA-05798 XA-05799
XA-05807 XB-05813
XA-05833-SE
XA-05833-S
XB-05788
XB-05808
XB-05788
XB-05813
XB-05808

Drawbar Eyes – Swivel Mount Assembly
DB-045BW1 Weld-On Assembly

• Steel block housing features close dimensional tolerances Replacement Parts
• Features grease zerk for easy lubrication XB-121
XB-T-316-A
XB-T-318
DB-045BS1 Bolt-On
XA-610-23
XB-767
DB-045BW1 DB-045BS1

500 lb. Max. Vert. Load Weight
DB-045BW1 Assembly GTW 45,000 20,412 85,000 38,556
38 17.2
2.38˝ (60.5mm) Eye VERTICAL 9,000 4,082 500 227
DB-045BS1 Drawbar GTW 45,000 20,412 85,000 38,556
23 10.4
2.38˝ (60.5mm) Eye VERTICAL 9,000 4,082 500 227
• For off-road* applications, reduce the published capacities by 25% and use with a rigid-mount coupling.
• For additional specifications, refer to document XL-DB131 or XL-DB132.
Mounting Dimensions
* See note below 15.0˝
.38˝ 1.56˝ 3.75˝ 8.5˝
15.0˝ REF Ø2.38˝
5.12˝ 4.00˝
1.63˝
2.38˝
3.75˝ 6.00˝
12.25˝ .38˝ Ø2.03˝
3˝ (DEPTH) 6˝ CLEARANCE
* See note below HOLE
.38˝
*NOTE: Minimum of 24 linear inches of .38˝ fillet NOTE: The mounting surface must have an adequate
weld required to develop rated capacity. chamfer, as shown above, so that the drawbar
mounts flush with the mounting surface.

Drawbar Eyes – Swivel Mount Assembly
DB-610-30 Weld-On Assembly

• Steel block housing features close dimensional tolerances Replacement Parts
• Features grease zerk for easy lubrication XB-121
XB-T-316-A
XB-T-318
DB-1249-49 Bolt-On
XA-610-23
XB-767
DB-610-30 DB-1249-49

500 lb. Max. Vert. Load Weight
DB-610-30 Assembly GTW 45,000 20,412 85,000 38,556
36 16.3
3˝ (76.2mm) Eye VERTICAL 9,000 4,082 500 227
DB-1249-49 Drawbar GTW 45,000 20,412 85,000 38,556
24 10.9
3˝˝ (76.2mm) Eye VERTICAL 9,000 4,082 500 227
• For off-road* applications, reduce the published capacities by 25% and use with a rigid-mount coupling.
• For additional specifications, refer to document XL-DB109 or XL-DB106.
Mounting Dimensions
* See note below
.38˝ 17.12˝
17.125˝ REF .
6.25˝
DIA.
4˝ 6.25˝ 3.00˝ 2˝
3˝ DIA. DIA.
DIA.
.38˝
5.5˝ 1.63˝ DIA. 5.50˝ 6˝ Ø2.03˝
6˝ SECTION
1.63˝ 14˝ 14.00˝ CLEARANCE
DIA. 3˝ (DEPTH ) HOLE
SECTION
.38˝ * See note below
*NOTE: Minimum of 24 linear inches of .38˝ fillet NOTE: The mounting surface must have an adequate
weld required to develop rated capacity. chamfer, as shown above, so that the drawbar
mounts flush with the mounting surface.

Drawbar Hinge Assembly
Drawbar Hinge Bracket / Frame Bracket / Equalizer Bushing Assembly

Carbon steel alloy castings.
Symmetrical design allows

use in either right-hand or
left-hand positions.
Shown with un-torqued nut
Capacity (Pair)
Complete Assembly Weight (pair): 70.4 lbs. (31.9 kg)
XD-5315 Hinge Bracket

Accepts
3˝ (76mm) square tubing or standard channel
3˝ x 4˝ (76mm x 102mm) rectanglar tubing or standard channel
Weight
15.7 lbs. (7.1 kg)
RK-1024
Bushing Assembly
XD-5275 Frame Bracket
Accepts
4˝ (102mm) square or rectangular tubing or standard channel
Weight
7.5 lbs. (3.4 kg)
RK-1024 Equalizer Bushing Assembly

Bushings XD-5275
Rubber Frame Bracket
Weight
12 lbs. (5.4 kg)
XD-5315
Additional Information Hinge Bracket
capacities by 25%.

COUPLING
ACCESSORIES
• Drawbar Guides
• Pintle Hook Wear Gages
• Plunger Adjustment Gages
• Tow Hooks
• Dolly Spotter
Coupling Accessories
Drawbar Guides: XA-02556 (left) and XA-02555 (right)

Application
Used in conjunction with PH-210,
PH-300(R), PH-310, PH-400(H),
PH-410, PH-419 and PH-550 Series 3.00˝
pintle hooks to simplify the coupling
procedure by guiding the drawbar
into the pintle hook throat.
For installation instructions, refer to
document number XL-PH353. 7.75˝
XA-02556 XA-02555
Left drawbar guide Right drawbar guide
Weight: 8 lbs. (3.6 kg) Weight: 8 lbs. (3.6 kg)
TH-10050-3 and TH-10050-5

Super strong and tough, these tow hooks are designed to be used in
pairs for tow cable or chain attachment. The tow hooks are designed TH-10050-3L, -3R
for emergency towing only. Forges steel alloy tow hooks are heat 3.6˝
treated and angled configuration.
3.9˝ 2.0˝
6.4˝
7.3˝ 1.0˝
.94˝ .6˝
3˝
.8˝
TH-10050-3L (left) and -3R (right) 2.4˝
Use (2) 3/4˝ Grade 8 bolts 3.2˝
.781˝
TH-10050-5L (left) and -5R (right) TYPICAL
Use (2) 20mm Grade 8 bolts
Full Face Mount* rating: 45,000 lbs. (20,410 kg)
Full Cantilevered Mount** rating: 33,000 lbs. (14,970 kg) TH-10050-5L, -5R
Weight: 4.6 lbs. (2.1 kg) each 92mm
*Full Face Mount **Full Cantilevered Mount

The mounting face of the The mounting face of the tow hook 100mm 50mm
tow hook is fully supported. extends beyond the mounting structure.
163mm
186mm 25mm
20mm 15mm
80mm
Max. 1˝ 20mm
60mm
81mm
Additional Information 21mm
TYPICAL
• For more product specific mounting information and operating
instructions, refer to document number XL-PH-310.

Coupling Accessories
Pintle Hook Wear Gages PINTLE HOOK WEAR GAGE

PH-550 TF-10520
PH-760, PH-775 (including NoLube models) TF-10521
PH-T-AOL-8, PH-T-60-AOS-L-8 TF-10522
PH-T-90-A, PH-T-126-A TF-10523
PH-300, PH-300-R, PH-400, PH-400-H TF-10612
PH-10RP with Frame Numbers XD-11047

TF-10960
and XE-10635, PH-30RP, PH-30SA, PH-30SB
Wear Gages are not available for the following

HOLLAND pintle hook models:
BH-200RN
BH-50mmRN
PH-10RP with Frame Number XB-11047-10
PH-210
PH-310
PH-410
PH-419
Plunger Adjustment Gages

Application
The plunger adjustment gage establishes proper air cylinder
plunger adjustment.
PH-200, PH-300, PH-400, PH-400-H PH-210, PH-310 and PH-410 Series

and PH-550 Series
TF-03147 TF-03147-10
PLUNGER PLUNGER
PLUNGER PLUNGER
ADJUSTMENT ADJUSTMENT
TOOL TOOL
LOCK NUT LOCK

HORN NUT HORN
Product Information
• For more product specific mounting information and • Not available for PH-419
operating instructions, refer to document number XL-PH304.

Dolly Spotter
TF-675 and TF-675-1 Dolly Master™

Application
The Dolly Master is a fast and economical way to spot converter dollies in the yard. The Dolly Master
is an air-operated, all steel, truck-mounted system featuring a vertical slide with 1.75˝ coupling
pin. A double-acting air cylinder, using the trucks air supply, moves the slide up and down. The
pneumatic control switch is located inside the cab for driver convenience.
Note: Dolly Master is not intended for use in trailer coupling or trailer spotting.
Operation
Align the coupling pin under the drawbar eye. Move the in-cab switch to ‘UP’. The pin lifts the drawbar
until the pin contacts the stop bar. This securely holds the drawbar eye during spotting.
Once the dolly is spotted, simply move the in-cab switch to “DOWN’. The pin lowers the drawbar and,
once lowered, disengages with the drawbar eye.
A B C
A B C
D D
TF-675 TF-675-1
A Maximum drawbar elevation range: 9˝ A Maximum drawbar elevation range: 9˝
B 12˝ usable stroke B 12˝ usable stroke
C 14.75˝ total stroke C 15.25˝ total stroke
D Provide adequate clearance D Provide adequate clearance
Capacities Capacities
390 lbs. (177 kg) Maximum Lift @ 80 psi 390 lbs. (177 kg) Maximum Lift @ 80 psi
15,000 lbs. (6,800 kg) Maximum DBP 15,000 lbs. (6,800 kg) Maximum DBP

Dolly Spotter
TF-675 and TF-675-1 Dolly Master™

The Dolly Master can be bolted or welded to the tow vehicle.
It has few moving parts so it’s easy to maintain.
Up/Down cab control allows the driver to secure and release the dolly from within the cab.
TF-675 TF-675-1
VERTICAL SLIDE
VERTICAL SLIDE
The stop mechanism holds the
dolly tongue securely while
The air cylinder (not shown)
repositioning the dolly.
actuates the slide by utilizing
the tractor air supply.
The air cylinder (not shown)
actuates the slide by utilizing The stop mechanism holds the
the tractor air supply. dolly tongue securely while
repositioning the dolly.
COUPLING PIN COUPLING PIN
Weight: 136 lbs. (61.7 kg) Weight: 156 lbs. (70.8 kg)
TF-675 Mounting Dimensions TF-675-1 Mounting Dimensions
26.25˝
14.75" 26.25˝
8.50˝ 6.0˝ 8.625˝ 6.00˝

12.00˝ 12.00˝
Replacements Parts Replacements Parts
XB-0839 XB-C-95
XB-T-69-C
XB-E-540 XB-C-375-C-125 XA-2524-R-12
XB-698
XB-01996 (4 REQ.) XA-08370
XA-08364
XB-T-61
XA-686 (4 REQ.)
XA-2524-R-13-1
XA-694
XB-T-61 XB-T-69-C
XB-C-95 XB-C-375-C-125
(4 REQ.) (4 REQ.)
XB-T-69-A XA-687 XA-08375
XA-08361
XA-07839 TUBE XB-05679-2 XB-E-540
(CYLINDER PROTECTION) XB-698 XB-0839
XA-2524-R-12 XB-01996
XB-1031
• For more product specific mounting information and
operating instructions, refer to document number
XL-PH-240-01 for TF-675, or document number
XL-PH388 for TF-675-1


REFERENCE
SECTIONS
• Warranty
• Cushioning Systems
• Glossary
General Safety Information
Introduction
In the following section of this catalog, you will notice the 8. Prior to use, always inspect a coupling device for
terms “IMPORTANT” and “WARNING” followed by important excessive wear, cracks, bent or deformed components,
product information. Those terms are described as follows: secure mounting, and damaged or missing parts.
Immediately inspect a coupling device which has been
IMPORTANT: Included additional information that if not subjected to overload or binding due to jackknifing or
followed could lead to hindered product excessive articulation.
performance. Failure to inspect a coupling device prior
to use could result in vehicle and trailer
Indicates a potentially hazardous situation separation which, if not avoided, could
which, if not avoided, could result in death result in death or serious injury.
or serious injury. 9. Never strike any part of a coupling product with a
hammer or other tool as parts could break.
General Safety Information 10. Mounting bolts must be long enough to provide a
minimum of two (2) full threads beyond the end of the
In the safety information below, you will notice the term nut. Always use new ASTM Grade 8 bolts with ASTM
‘WARNING’ which indicates a potentially hazardous Grade C lock nuts with hardened steel washers for
situation which, if not avoided, could result in death or installation and mounting. Torque to manufacturer’s
serious injury. specifications and do not over-torque.
1. Always read the Product Specification Sheet or Failure to use a long enough bolt or
Owner’s Manual associated with each product before proper fastener type for mounting could
installation or use of the product. These manuals are result in vehicle and trailer separation
shipped with each product or can be obtained from which, if not avoided, could result in
the SAF-HOLLAND website at www.safholland.us. death or serious injury.
2. Do not modify or add to these products. 11. Verify that the drawbar size is compatible with the
coupling device of the tow vehicle. Refer to the
3. Never exceed the manufacturer’s rated capacities of
‘Drawbar Compatibility Chart’ located in this catalog.
a coupling device, including Maximum Gross Trailer
Weight and Maximum Vertical Load. 12. Verify that a pintle hook latch closes and locks
4. For over-the-road applications, SAF-HOLLAND completely prior to use.
recommends that a coupling device be equipped with Failure to correctly close and lock a pintle
both a primary and secondary lock. hook latch can result in vehicle and trailer
5. For off road applications or vehicle operation over separation which, if not avoided, could
rough terrain, use a 1) swivel-mount coupling device result in death or serious injury.
with a rigid-mount drawbar, or 2) a rigid-mount 13. Check the pintle hook latch gap, which is the space
coupling device with a swivel-mount drawbar. Never between a closed latch and the top of the pintle hook
use a swivel-mount coupling device with a swivel- horn. If the latch gap is 0.38˝ (9.5mm) or larger, do not
mount drawbar. use the pintle hook.
6. For rigid tongue trailers towed with ball, pintle hook 14. Do not over-articulate a coupling connection by
or coupler style coupling devices, most hitch and trailer jackknifing or binding during vehicle operations.
manufacturers recommend a vertical (tongue) load of
10% - 15% of the gross trailer weight (GTW). Do not Failure to avoid over-articulation of a
tow a trailer that has a negative vertical load. coupling connection due to jackknifing
or binding could result in failure of the
coupling device(s) which, if not avoided,
IMPORTANT: Do not weld on these products, except
could result in death or serious injury.
as specified by SAF-HOLLAND for welded
installation. 15. Do not apply grease or other lubricants to the hook
of the coupling device or drawbar eye which may
Weld repairs to repair a broken part or to trap abrasive sand and dirt which can accelerate wear
build-up a worn surface are strictly in the coupling connection. Additionally, grease or
forbidden. Such weld repairs could locally other lubricants can hide cracks or damage present in
alter the chemistry and heat treatment of coupling components.
the metal, alter the strength of the coupling 16. Follow inspection and maintenance guidelines listed
device, or create a stress concentration that in the Product Specification Sheet or Owner’s Manual
could result in structural failure resulting in available from the coupling manufacturer.
death or serious injury.

General Safety Information
17. Always use SAF-HOLLAND Original Parts for repair.
Installation and use of non original
SAF-HOLLAND parts could result in
failure of the coupling device(s) which,
if not avoided, could result in death or
serious injury.
SAF-HOLLAND recommends that trailer and dolly
manufacturers, distributors, and users be familiar with
applicable national, state and local regulations governing
coupling systems and safety devices such as safety chains.
Within the United States, the following is a partial list of
sources for regulations and information pertaining to trailer
towing:
• National Highway Traffic Safety Administration (NHTSA) –
Federal Motor Carrier Safety Standards and Regulations
• National Association of Trailer Manufacturers (NATM)
• Trailer Safety Industry Coalition (TSIC)
• Society of Automotive Engineers (SAE) Design and Test
Standards
• American Trucking Association (ATA) – Technology &
Maintenance Council (TMC) Recommended Practices
• Truck Trailer Manufacturers Association (TTMA)
Recommended coupling and uncoupling procedures are also
available from several of the above listed sources.
Warranty
Products in this catalog are covered by SAF-HOLLAND’s
Commercial Warranty for Coupling Products. For North
America, this is a two-year parts and labor warranty. For other
countries or regions, refer to the appropriate coupling products
warranty available on our website.

Coupling System Selection
Coupling System Selection The type of load, density of the load, and placement of the
load in relation to the trailer axles will have a significant
Gross Trailer Weight (GTW) effect on the vertical load at the trailer tongue. Excessive
vertical loads, approaching 20% of gross trailer weight, can
GTW is the weight of an empty trailer plus the weight of its result in accelerated wear and over-loading of the coupling
maximum payload. This is shown as Gross Vehicle Weight devices.
Rating (GVWR) as specified by the trailer manufacturer and is
shown on the manufacturer’s identification label located on the Payload Changes Vertical Load
trailer. If the label is missing or unreadable, contact the trailer
1,000 POUNDS
manufacturer for GVWR information.
Always use the GVWR as supplied by the trailer manufacturer as
the ‘minimum’ gross trailer weight that the coupling system is to
be selected for.
If various size trailers will be towed, the trailer with the largest
GVWR must be used to determine the capacity requirements of
the coupling device.
If a tow vehicle will pull multiple trailers at the same time, as 4,000 POUNDS
with doubles, triples and road trains, the sum of the GVWRs
for all towed trailers must be used to determine the capacity
requirements of the coupling device.
Maximum Vertical Load
Vertical load is the upward force exerted on the drawbar eye
of the trailer and the downward force exerted on the coupling
device of the tow vehicle.
Hinged Tongue Trailer
8,000 POUNDS
The tongue is hinged to the trailer so that the tongue will
not transfer the vertical weight of the trailer or payload
to the coupling devices. The vertical load imposed on a
coupling device by a hinged tongue trailer is approximately
one-half of the weight of the hinged tongue/drawbar
assembly only. Where vertical load on the coupling device is
limited due to a hinged tongue, the maximum gross trailer Drawbar Compatibility
weight rating for the drawbar/eye may be increased (see The size of the drawbar eye (lunette) must be compatible with
drawbar product pages for specific ratings). the coupling device of the tow vehicle. This includes the inside
diameter (I.D.) of the eye and the cross-section dimension(s) of
PIVOT POIN T
DRAWBAR the eye. Proper eye selection will allow for adequate clearance
between the eye and it’s mating component to help prevent
binding between coupling components. If a trailer is to be pulled
by more than one tow vehicle, compatibility should be checked
with the coupling devices of each tow vehicle.
Over-The-Road Locking Systems
SAF-HOLLAND recommends that all couplers and pintle
Rigid Tongue Trailer
hooks used in over-the-road applications be equipped with
The tongue and trailer form a single rigid unit so that the both a primary lock and secondary lock. Holland FastLatch™
vertical load measured at the drawbar eye includes the incorporates both the primary and secondary locks into a single
weight of the trailer and its payload. The vertical load is integrated latch system.
generally recommended to be a minimum of 10% - 15%
of the maximum gross trailer weight.
WEIGHT HERE
TRANSFERRED HERE

Operating Conditions/Cushioning Systems
Operating Conditions Cushioning Systems

Off-Road / Rough Terrain Applications Holland cushioning (shock absorption) systems include:
Reduction in Rated Capacities • Rubber Mount
For off-road and rough terrain applications, the rated Absorbs shock loads from hard coupling, vehicle launch
capacities (MGTW and Maximum Vertical Load) of the and braking (reference Holland products PH-990,
coupling devices for both the tow and towed vehicles DB-1407-S, and DB-1407-SE).
should be reduced by a minimum of 25% to accommodate
the increase in dynamic loading.
Example – A pintle hook rated at 100,000 lbs. (45,360 kg)
MGTW and 20,000 lbs. (9,070 kg) maximum vertical load
would, for off-road applications, be rated at 75,000 lbs.
(34,020 kg) MGTW and 15,000 lbs. (6,800 kg) Maximum
Vertical Load. PH-990ST71 DB-1407-S
Articulation
Maximizing the range of articulation between the drawbar
• Steel Spring
eye of the trailer and the coupling device of the tow vehicle
is critical for good off-road performance. Holland pintle Absorbs shock loads during vehicle launch and
hooks are designed for maximum articulation with Holland acceleration (reference Holland products PH-30SA and
drawbars. Other considerations include: PH-30SB).
• A swivel-mount coupler/pintle hook or swivel-mount
drawbar can further enhance articulation in off-
road applications. The swivel-mount feature provides
rotation to help prevent binding between the drawbar
eye, coupler or pintle hook. Note however that you PH-30SA41
should never use a swivel-mount coupler/pintle hook
with a swivel-mount drawbar. The two swivel-mount
components could lead to over-rotation of the coupling • Pneumatic Snubber
device.
For vehicles equipped with air systems, a snubber
• It is important to coordinate the size of the drawbar with force supplied by an air service chamber helps to
eye with the mating component of the coupler or pintle minimize ‘free play’ or ‘slack’ between the drawbar eye
hook. Proper sizing will allow for optimum articulation and coupling device as well as absorbing shock loads
of the coupling system when driving over uneven during deceleration and braking (Reference Holland
terrain. Reference Drawbar Compatibility Chart on pages products PH-210, PH-300(R), PH-310, PH-400(H), PH-
42 – 43 for assistance in the selection process. 410, PH-419, PH-550, and DB-1400AC).
PH-210 DB-1400AC
PH-775SL11 NoLube
DB-610-30

Mounting Information
Mounting Information
Mounting Height
When mounting a coupling device, a height should be selected
that results in the chassis of the towed vehicle being close to
level with the ground. An offset in mounting height will create
vertical and horizontal displacement of the drawbar in relation
to the mating component of the coupling device. This mismatch
in height will lead to accelerated wear and changes in vehicle
handling.
Improper Mounting Height

(causing excessive vertical and horizontal movement)
Mounting Surface
The mounting surface for a coupling device must be flat and of
adequate strength to support the rated capacity of the coupling
device. It must have sufficient vertical load and horizontal load
capability to comply with the requirements of SAE J847.
Mounting Hardware
All mounting hardware must be new ASTM Grade 8 bolts with
hardened steel washers and ASTM Grade C locknuts. Bolts
should be of sufficient length to provide a minimum of two (2)
full threads beyond the end of the nut under recommended
torque.
Proper Fastener Selection
Bolt head designation

for Grade 8 is 6 equally
spaced bars as show.
A minimum of 2 full
threads must be exposed
after proper torquing.
To develop the full rated capacity of a coupling device, all

required mounting fasteners must be present with proper
and equal torque applied to each fastener. Torque values and
procedures should follow SAE J429 and are stated in the Owner’s
Manual shipped with each Holland coupling product. This
information is also available online at the SAF-HOLLAND website.

Glossary
ASTM Negative Vertical Load

American Society for Testing and Materials The load as an upward PAYLOAD
force measured at the

Converter Dolly / Dolly
drawbar located at Negative
An auxiliary axle chassis consisting of a frame with single or Vertical
the coupling end of
tandem axles, suspension, fifth wheel, and tongue with drawbar. Load
the trailer tongue. A
A dolly is used to convert a semi-trailer into a full trailer.
negative vertical load PAYLOAD
typically results from the
‘A’ Dolly
payload being placed
A converter dolly with a single point of Positive
behind the trailer axle Vertical
attachment to the towing vehicle; the
(see illustration). Load
point being located along the centerline “A” DOLLY
of the dolly.
Off-Road
‘C’ Dolly or ‘H’ Dolly Refers to terrain on which a tow/towed vehicle will operate
A converter dolly with two points of attachment to the that is ungraded, rough or undulating, with no maintained
towing vehicle; the points being equally spaced along the travel surface, generally considered to not be part of the public
centerline of the dolly. road system. Examples include agricultural fields, construction
sites, utility right-of-way, temporary logging roads, and what is
Drawbar commonly refered to as ‘two-track’ roads.
The structural member of the trailer tongue that attaches the
drawbar eye or lunette to the trailer tongue. Drawbars are Over-The-Road
typically bolt-on or weld-on and are available as rigid mount or Refers to terrain on which a tow/towed vehicle will operate that
swivel mount. is paved or features a graded surface, generally considered to
part of the public road system.
Drawbar Eye / Lunette
A round ‘doughnut’ shaped device used to couple a trailer SAE
tongue to a towing vehicle equipped with a coupling device Society of Automotive Engineers
such as a pintle hook or coupler. J429 - Mechanical and material requirements for externally
threaded fasteners
Drawbar Pull (DBP)
Drawbar Pull is the pulling force that a tow vehicle (truck, J847 - Trailer towbar eye and pintle hook/coupler
tractor, tug, etc.) is capable of producing, measured at the performance
coupling along the longitudinal axis of the tow vehicle and
Semi-trailer
expressed as a net horizontal force in pounds or Newtons. It
A trailer, except pole trailer, so constructed that a substantial
is the tractive effort of the tow vehicle on a specific driving
part of its weight rests upon or is carried by another vehicle or
surface, minus the force required to start, accelerate and
converter dolly.
maintain speed of the tow vehicle.
Tare Weight / Unloaded Vehicle Weight (UVW)
Full Trailer
The total weight of a vehicle at the ground, including normal
A trailer equipped with two or more axles that support the
fluids and equipment, in a condition to receive occupants and
entire weight of the trailer. Full trailers typically feature a hinged
payload.
trailer tongue.
Trailer Tongue
Gross Trailer Weight (GTW) / Maximum Gross Trailer
Weight (MGTW) The structural member of a trailer that connects to a towing
The actual total weight measured at the ground of a fully vehicle.
loaded trailer or multiple coupled trailers. Maximum Gross Trailer
Weight is the largest weight of both the trailer(s) and payload Vertical Load / Maximum Vertical Load
that can safely be towed by a coupling device. The load or downward force measured at the drawbar located at
the coupling end of the trailer tongue. Maximum Vertical Load is
Gross Vehicle Weight Rating (GVWR) the manufacturer’s recommended static vertical load (down) that
The value specified by the manufacturer as the loaded maximum can be safely applied to the coupling device.
weight of a single motor vehicle or trailer.
Jackknife
Over-articulation between the towing and towed vehicles
(generally greater than 90 degrees) that results in binding at the
coupling connection.


They’re called “Original Parts” for a reason!
Why trust anything else?
FIFTH WHEELS SUSPENSIONS LANDING GEAR
COUPLINGS LIFTGATES
Service parts for HOLLAND, SAF, NEWAY, and

former Binkley, Simplex, and TruckMaster Products.
SAF-HOLLAND is a leading supplier of highly efficient components, systems and service programs in the
SAF-HOLLAND, HOLLAND, SAF, NEWAY, SAF-HOLLAND Original Parts,

XL-PH10397SG-en-US Rev D · 2014-04-15 · Amendments and errors reserved ©SAF-HOLLAND, Inc.
global commercial vehicle industry. At SAF-HOLLAND, “Engineering Your Road to Success” is more than a
NoLube and FAST LATCH are trademarks of SAF-HOLLAND S.A.,

tagline for us. Providing engineered solutions that drive the success of our fleet customers around the world
is at the center of everything we do. Our three global product brands deliver both our promise and continued
innovation to our customers.
SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

TRAILER AXLES AND COUPLING AND LIFTING POWERED VEHICLE
SUSPENSION SYSTEMS TECHNOLOGIES SUSPENSIONS
Innovative, fleet-optimized, Reliable, fleet-trusted solutions Tough, fleet-proven air suspensions
trailer axle, braking and for safe and easy coupling and that provide extreme-duty
suspension systems that lifting operations as a result of performance for powered vehicles
maximize operating efficiencies. cutting-edge technologies and through advanced engineering and
global expertise. field experience.
Our global product brands bring more than 200 years of combined experience to the road and contribute to
increasing efficiency to the global commercial vehicle industry. With a team of over 3,000 employees and a
worldwide network of over 9,000 service partners, we work continuously for your success and make sure you
arrive safely at your destination.
HIGHLY-EFFICIENT COMPONENTS AND SYSTEMS FOR TRUCKS AND TRAILERS
EUROPE l NORTH AMERICA l SOUTH AMERICA l AFRICA l ASIA l MIDDLE EAST l AUSTRALIA
safholland.com
SAF-HOLLAND, Inc.
888.396.6501 Fax 800.356.3929
SAF-HOLLAND Canada Limited

519.537.3494 Fax 800.565.7753
Western Canada 604.574.7491 Fax 604.574.0244

HOLLAND

Uploaded by

Copyright:

Available Formats

HOLLAND

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HOLLAND

Uploaded by

Copyright:

Available Formats

What products and services does SAF-HOLLAND provide?

What products and services does SAF-HOLLAND provide?

What are some of the brands represented by SAF-HOLLAND?

What are some of the brands represented by SAF-HOLLAND?

2014

HOLLAND COUPLING PRODUCTS

OFFERING AN EXTENSIVE RANGE OF PINTLE

In 2006, two industrial icons merged

• FIFTH WHEELS • MECHANICAL SUSPENSION/ • SEVERE-DUTY VOCATIONAL

• KINGPINS • TRAILER AXLES/BRAKES • BUS AIR-RIDE SUSPENSIONS

• COUPLINGS • AIR-RIDE SUSPENSION/AXLE • STEER AIR-RIDE

Pintle Hooks EH-3050 & EH-HD Mounting Options .................................. 38

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 1

2 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 3

Replacements for Discontinued Models

National Stock Number* (NSN) Reference Chart

HOLLAND Cage Code** – 74410

DESIGNATED HOLLAND CURRENT

4 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 5

PART NUMBER MAIN FRAME NUMBER DISTINGUISHING FEATURES

6 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

• Combination Ball / Hook

BH-200RN41 Features 2˝ diameter ball

One-hand operation and

Drawbar Eye Dimensions

Additional Information For BH-200RN51/50mmRN51

* See definition on page 67

8 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

The hook is designed

Weight: 7.5 lbs. (3.4 kg) 1.75˝

• For off-road* applications, reduce the above maximum

* See definition on page 67 XB-11157

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 9

Forged from a special steel

Weight: 11 lbs. (5 kg)

Capacities .53˝ DIA.

6,000 lbs. (2,720 kg) Maximum Vertical Load

* See definition on page 67

10 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

One-hand operation and

Weight: 8.4 lbs. (4.2 kg) 1.75˝

* See definition on page 67 XB-11157

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 11

Forged from a special steel .63˝

Cast ductile iron mounting 5.88˝

• For off-road* applications, reduce the above maximum

* See definition on page 67

Available with a XB-767

12 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.

Fully machined, One-hand operation and 7.75˝

Additional Information XB-11157

• For off-road* applications, reduce the above maximum

* See definition on page 67

XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. 13

4.50˝ MIN. CLEAR

1.69˝ .53˝ HOLES

Additional Information XB-T-20-2

14 XL-PH10397SG-en-US Rev D 04-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc.