Cse 209 Final
Cse 209 Final
Marks – 40
[Answer all the questions]
CO2 1. (a) A sender wants to transmit data using CRC error detection and correction techniques. Now, Find [5]
the Code-word bits for CRC Encoder and Decoder. Assume, X1 is the last digit of your student ID.
[Hints: Convert Data word in binary and wrapped into 4 bits data]
(b) How the crosstalk is minimized in case of twisted-pair cable? Explain with proper diagram. [5]
CO2 2. (a) In Synchronous TDM, four 1X1X20 bps connections are multiplexed together. A unit is 1 bit. [5]
Here, X1X2 denotes last two digits of your ID. Now, find the followings.
(b) Show ASK, FSK and PSK with necessary diagrams for the data (X+1*10)10 [X represents [5]
last digits of your ID].
CO3 3. (a) “Frequency hopping spread spectrum (FHSS) is better than the direct sequence spread spectrum [5]
(DSSS) at high-frequency as well as higher-bit-rate”. Is the statement true or false? Clarify your
opinion.
(b) A station wants to transmit 10 X1X2 characters in which each character is encoded as 8 bits. Here, [5]
X1X2 denotes last two digits of your ID.
CO4 4. (a) Suppose, a routing table in a datagram network have two entries with the same [5]
destination address. If, you want to send a data using this routing table, will you face
any problem? Justify your answer
(b) Justify- why four errors can not be detected in two dimensional parity check code with proper [5]
example and explanation.
Page | 1