This document provides instructions for connecting a C7 cable to the main board of a Volvo S40-V40. The instructions state to remove all plastic covers to access the main board with nails and engines. Connection points are located on the back side of the board and cable leads should be soldered to these points as shown in photos.
This document provides instructions for connecting a C7 cable to the main board of a Volvo S40-V40. The instructions state to remove all plastic covers to access the main board with nails and engines. Connection points are located on the back side of the board and cable leads should be soldered to these points as shown in photos.
This document provides instructions for connecting a C7 cable to the main board of a Volvo S40-V40. The instructions state to remove all plastic covers to access the main board with nails and engines. Connection points are located on the back side of the board and cable leads should be soldered to these points as shown in photos.
This document provides instructions for connecting a C7 cable to the main board of a Volvo S40-V40. The instructions state to remove all plastic covers to access the main board with nails and engines. Connection points are located on the back side of the board and cable leads should be soldered to these points as shown in photos.
USE C7 CABLE, REMOVE ALL PLASTIC COVERS, NOW WE HAVE ONLY MAIN BOARD WITH NAILS AND ENGINES; WITH THESE METHODS YOU DON´T NEED TO TOUCH EITHER SCREENS OR NAILS. LOCATE POINTS ON THE BACK SIDE OF THE BOARD LIKE PHOTOS BELOW AND SOLDER CABLE LEADS AS THEY SHOW TO US:
