Product data sheet ATV312H075N4

Characteristics variable speed drive ATV312 - 0.75kW -

Main
Range of product Altivar 312
Product or component Variable speed drive
type
Product destination Asynchronous motors
Product specific Simple machine
application
Assembly style With heat sink
Component name ATV312
Motor power kW 0.75 kW
Motor power hp 1 hp
[Us] rated supply 380...500 V (- 5...5 %)
voltage

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Supply frequency 50...60 Hz (- 5...5 %)
Network number of 3 phases
phases
Line current 2.7 A for 500 V
3.6 A for 380 V, 1 kA
EMC filter Integrated
Apparent power 2.4 kVA

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
Maximum transient 3.5 A for 60 s

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
current

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Power dissipation in W 41 W at nominal load
Speed range 1...50
Asynchronous motor Factory set : constant torque
control profile Sensorless flux vector control with PWM type motor
control signal
Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A,
R2B, LI1...LI6 terminal 2.5 mm² AWG 14
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5
mm² AWG 14
Supply Internal supply for logic inputs at 19...30 V <= 100 A
for overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to
10 kOhm) at 10...10.8 V <= 10 A for overload and
short-circuit protection
Communication port CANopen
protocol Modbus
IP degree of protection IP20 on upper part without cover plate
IP21 on connection terminals
IP31 on upper part
IP41 on upper part
Option card CANopen daisy chain communication card
DeviceNet communication card
Fipio communication card
Modbus TCP communication card
Profibus DP communication card

Complementary
Supply voltage limits 323...550 V
Network frequency limits 47.5...63 Hz
Prospective line Isc 1 kA
Continuous output current 2.3 A at 4 kHz
Speed drive output frequency 0.5...500 Hz
Nominal switching frequency 4 kHz

10/8/2011
1
Switching frequency 2...16 kHz adjustable
Transient overtorque 150...170 % of nominal motor torque
Braking torque <= 150 % with braking resistor for 60 s
100 % with braking resistor continuously
150 % without braking resistor
Regulation loop Frequency PI regulator
Motor slip compensation Adjustable
Automatic whatever the load
Suppressable
Output voltage <= power supply voltage
Tightening torque 0.6 N.m Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
0.8 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
Insulation Electrical between power and control
Analogue input number 3
Analogue input type AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000
Ohm
AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000
Ohm
AI3 configurable current 0...20 mA, impedance 250 Ohm
Sampling duration AI1, AI2, AI3 8 ms for analog
LI1...LI6 4 ms for discrete
Response time AOV, AOC 8 ms for analog
R1A, R1B, R1C, R2A, R2B 8 ms for discrete
Linearity error +/- 0.2 % for output
Analogue output number 2
Analogue output type AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bits
AOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits
Discrete input logic LI1...LI4 logic input not wired , < 13 V (state 1)
LI1...LI6 negative logic (source), > 19 V (state 0)
LI1...LI6 positive logic (source), < 5 V (state 0), > 11 V (state 1)
Discrete output number 2
Discrete output type R1A, R1B, R1C configurable relay logic 1 NO + 1 NC, electrical durability 100000
cycles
R2A, R2B configurable relay logic NC, electrical durability 100000 cycles
Minimum switching current R1-R2 10 mA at 5 V DC
Maximum switching current R1-R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, L/R = 7 ms
R1-R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, L/R = 7 ms
R1-R2 on resistive load, 5 A at 250 V AC, cos phi = 1, L/R = 0 ms
R1-R2 on resistive load, 5 A at 30 V DC, cos phi = 1, L/R = 0 ms
Discrete input number 6
Discrete input type LI1...LI6 programmable 24 V 0...100 mA with PLC, impedance 3500 Ohm
Acceleration and deceleration ramps Linear adjustable separately from 0.1 to 999.9 s
S, U or customized
Braking to standstill By DC injection
Protection type Input phase breaks drive
Line supply overvoltage and undervoltage safety circuits drive
Line supply phase loss safety function, for three phases supply drive
Motor phase breaks drive
Overcurrent between output phases and earth (on power up only) drive
Overheating protection drive
Short-circuit between motor phases drive
Thermal protection motor
Insulation resistance >= 500 MOhm at 500 V DC for 1 minute
Local signalling 1 LED red for drive voltage
Four 7-segment display units for CANopen bus status
Time constant 5 ms for reference change
Frequency resolution Analog input 0.1...100 Hz
Display unit 0.1 Hz
Type of connector 1 RJ45 Modbus/CANopen
Physical interface RS485 multidrop serial link
Transmission frame RTU
Transmission rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
4800, 9600 or 19200 bps Modbus
Number of addresses 1...127 CANopen
1...247 Modbus

2
Number of drive 127 CANopen
31 Modbus
Marking CE
Operating position Vertical +/- 10 degree
Product weight 1.8 kg

Environment
Dielectric strength 2410 V DC between earth and power terminals
3400 V AC between control and power terminals
Electromagnetic compatibility 1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Radiated radio-frequency electromagnetic field immunity test conforming to IEC
61000-4-3 level 3
Standards IEC 61800-5-1
Product certifications CSA
C-Tick
GOST
NOM
UL
Pollution degree 2
Protective treatment TC
Vibration resistance 1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity 5...95 % without condensation conforming to IEC 60068-2-3
5...95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for storage -25...70 °C
Ambient air temperature for operation -10...50 °C without derating with protective cover on top of the drive
-10...60 °C with derating factor without protective cover on top of the drive
Operating altitude <= 1000 m without derating
>= 1000 m with current derating 1 % per 100 m
RoHS EUR status Compliant
RoHS EUR conformity date 0913