Scribd
Upload
350 views5 pages

EBC-A40L Battery Tester: User Manual

The document is a user manual for the EBC-A40L battery tester. It describes the features, specifications, display and settings of the tester. The tester can charge and discharge batteries at currents up to 35A and 40A respectively and has buttons and interfaces to control settings and view test results.

Uploaded by

Sai Lao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
350 views5 pages

EBC-A40L Battery Tester: User Manual

The document is a user manual for the EBC-A40L battery tester. It describes the features, specifications, display and settings of the tester. The tester can charge and discharge batteries at currents up to 35A and 40A respectively and has buttons and interfaces to control settings and view test results.

Uploaded by

Sai Lao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

ZKETECH

EBC-A40L Battery Tester


（User Manual）

Release Date 2017-01-01


http://www.zketech.com

1. Features
The EBC-A40L tester is designed to charge and discharge batteries within 5V at a large current,
the maximum current it supports is 35A in charging and 40A in discharging.

2. Specifications

3. Connecting pattern

3.1 Testing connector

3.2 PC connection
The EBC-A40L tester can connect with a computer through a designated USB-TTL cable
3.3 Power supply:
AC 200V

4. Display and setting

4.1 Buttons
SET (1) —— setting knob
ON (2) —— start and stop.

EBC-A40L User Manual


Copyright (C) 2006-2017 ZKETECH
http://www.zketech.com

4.2 Testing interface

The first line shows mode (CC-constant current), voltage, and current.
The second line shows working process, working time (in minute) and capacity (automatic
switch between 0000mAh and 00.00Ah).
Working process reads OFF when the test stops and DSC or CHG in testing. It shows AT1 if
you choose automatic charging/discharging and 1 means the step 1 of current testing.
A short press on the “SET” button and the display changes to power and energy.

In auto test of “charge-discharge-charge”, you can check test results of each step by spin the
“SET” knob.

Press the “ON” button to start discharging test (shows DSC) and one more press to stop (shows
OFF).
You can open setting interface by press on the “SET” button for 2 seconds in the stop state
(This function is invalid when the tester being connected with the PC software).
4.3 Setting interface
The cursor default is on mode setting. Press “SET” button to move it to the value you want to
set up. Spin the “SET” knob to change parameters selected by the cursor. It will go back to the
limit value if your setting exceeds the allowed range. Press “ON” button then move to the next
item.
1) DSC-CC (Constant current discharge)

First line: mode and current setting.


Second line: cut-off voltage (testing automatically stops when voltage reaches below this value)
and the maximum testing time setting (no time limit if being set 0).
2) DSC-CP (constant power discharge)

EBC-A40L User Manual


Copyright (C) 2006-2017 ZKETECH
http://www.zketech.com

First line: mode and power setting.


Second line: cut-off voltage (testing automatically stops when voltage reaches below this value)
the maximum testing time setting (no time limit if being set 0).
3) CHG-CV (constant voltage-current charge)

First line: mode and current setting.


Second line: constant voltage, cut-off current (testing automatically stops when current reaches
below this value; can be set above 0.1A), and the auto mode setting:
— NOR —— normal mode，testing stops when charging finish.
— AUTO —— automatically go through the “charge-discharge-charge” round test.
Put the cursor on AUTO and a long-time press on the “ON” button can lead to the setting of
auto discharging parameters:

The first parameter is discharging current, and the second the cut-off voltage, the third is the
waiting time for step switches (you are suggested to wait for 5-10 minutes between charging
and discharging for the battery cooling).
After you finish setting, press the “SET” button for a long time to return to the previous setting
interface.
Press “SET” button for a long time in the first-level setting interface to save data and go back
to testing interface.
After finish setting, press “ON” button to start testing.
4.4 Setting examples
1) Discharge setting (discharge the Lithium battery from 3.7V to 2.8V at 5A)

2) Charge setting (charge the Lithium battery from 3.7V to 4.2V at 2.5A, cut-off current is
0.11A)

EBC-A40L User Manual


Copyright (C) 2006-2017 ZKETECH
http://www.zketech.com

3) Auto test setting (charge the 3.7V Lithium battery at 2.5A and discharge it at 5A, waiting
time is 5 minutes)

5. Precautions

1) Positive and negative connections should not be reversed.


2) Always use the tester within the allowed range.
3) PC connection software: EB Tester Software, download it from www.zketech.com.
4) PC connection: follow EB Tester Software User Manual.
5) Technical support: [email protected]
6) Taobao store: zke2006.taobao.com

We always focus on innovation and improvement and will keep upgrading the software. Please
frequently visit our official website: www.zketech.com to download the latest manuals.

EBC-A40L User Manual


Copyright (C) 2006-2017 ZKETECH

You might also like