0% found this document useful (0 votes)
49 views14 pages

HEF40106B

Uploaded by

James Janson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
49 views14 pages

HEF40106B

Uploaded by

James Janson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

HEF40106B

Hex inverting Schmitt trigger


Rev. 10 — 7 October 2022 Product data sheet

1. General description
The HEF40106B is a hex inverter with Schmitt-trigger inputs. Inputs include clamp diodes. This
enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.

2. Features and benefits


• Wide supply voltage range from 3.0 V to 15.0 V
• CMOS low power dissipation
• High noise immunity
• Schmitt trigger input discrimination
• Fully static operation
• 5 V, 10 V, and 15 V parametric ratings
• Standardized symmetrical output characteristics
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
• Complies with JEDEC standard JESD 13-B
• ESD protection:
• HBM JESD22-A114F exceeds 2 kV
• MM JESD22-A115-B exceeds 200 V

3. Applications
• Wave and pulse shapers
• Astable multivibrators
• Monostable multivibrators

4. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
HEF40106BT -40 °C to +125 °C SO14 plastic small outline package; 14 leads; SOT108-1
body width 3.9 mm
HEF40106BTT -40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; SOT402-1
14 leads; body width 4.4 mm
Nexperia HEF40106B
Hex inverting Schmitt trigger

5. Functional diagram

1A 1Y
1 2

2A 2Y
3 4

3A 3Y
5 6

4A 4Y
9 8

5A 5Y
11 10

6A 6Y
13 12 A Y

mna204 mna025

Fig. 1. Functional diagram Fig. 2. Logic diagram (one inverting buffer)

6. Pinning information

6.1. Pinning

T package
SOT108-1 (SO14)

1A 1 14 VDD TT package
SOT402-1 (TSSOP14)
1Y 2 13 6A

2A 3 12 6Y 1A 1 14 VDD
1Y 2 13 6A
2Y 4 11 5A
2A 3 12 6Y
3A 5 10 5Y 2Y 4 11 5A
3A 5 10 5Y
3Y 6 9 4A
3Y 6 9 4A
VSS 7 8 4Y VSS 7 8 4Y

aaa-035586 aaa-035587

6.2. Pin description


Table 2. Pin description
Symbol Pin Description
1A, 2A, 3A, 4A, 5A, 6A 1, 3, 5, 9, 11, 13 input
1Y, 2Y, 3Y, 4Y, 5Y, 6Y 2, 4, 6, 8, 10, 12 output
VDD 14 supply voltage
VSS 7 ground (0 V)

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 2 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

7. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level.
Input Output
nA nY
L H
H L

8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
Symbol Parameter Conditions Min Max Unit
VDD supply voltage -0.5 +18 V
IIK input clamping current VI < -0.5 V or VI > VDD + 0.5 V - ±10 mA
VI input voltage -0.5 VDD + 0.5 V
IOK output clamping current VO < -0.5 V or VO > VDD + 0.5 V - ±10 mA
II/O input/output current - ±10 mA
IDD supply current - 50 mA
Tstg storage temperature -65 +150 °C
Tamb ambient temperature -40 +125 °C
Ptot total power dissipation Tamb = -40 °C to +125 °C [1] - 500 mW
P power dissipation per output - 100 mW

[1] For SOT108-1 (SO14) package: Ptot derates linearly with 10.1 mW/K above 100 °C.
For SOT402-1 (TSSOP14) package: Ptot derates linearly with 7.3 mW/K above 81 °C.

9. Recommended operating conditions


Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
VDD supply voltage 3 15 V
VI input voltage 0 VDD V
Tamb ambient temperature in free air -40 +125 °C

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 3 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

10. Static characteristics


Table 6. Static characteristics
VSS = 0 V; VI = VSS or VDD; unless otherwise specified.
Symbol Parameter Conditions VDD Tamb = -40 °C Tamb = +25 °C Tamb = +85 °C Tamb = +125 °C Unit
Min Max Min Max Min Max Min Max
VOH HIGH-level |IO| < 1 μA 5V 4.95 - 4.95 - 4.95 - 4.95 - V
output voltage 10 V 9.95 - 9.95 - 9.95 - 9.95 - V
15 V 14.95 - 14.95 - 14.95 - 14.95 - V
VOL LOW-level |IO| < 1 μA 5V - 0.05 - 0.05 - 0.05 - 0.05 V
output voltage 10 V - 0.05 - 0.05 - 0.05 - 0.05 V
15 V - 0.05 - 0.05 - 0.05 - 0.05 V
IOH HIGH-level VO = 2.5 V 5V - -1.7 - -1.4 - -1.1 - -1.1 mA
output current VO = 4.6 V 5V - -0.64 - -0.5 - -0.36 - -0.36 mA
VO = 9.5 V 10 V - -1.6 - -1.3 - -0.9 - -0.9 mA
VO = 13.5 V 15 V - -4.2 - -3.4 - -2.4 - -2.4 mA
IOL LOW-level VO = 0.4 V 5V 0.64 - 0.5 - 0.36 - 0.36 - mA
output current VO = 0.5 V 10 V 1.6 - 1.3 - 0.9 - 0.9 - mA
VO = 1.5 V 15 V 4.2 - 3.4 - 2.4 - 2.4 - mA
II input leakage 15 V - ±0.1 - ±0.1 - ±1.0 - ±1.0 μA
current
IDD supply current all valid input 5 V - 0.25 - 0.25 - 7.5 - 7.5 μA
combinations; 10 V - 0.5 - 0.5 - 15.0 - 15.0 μA
IO = 0 A
15 V - 1.0 - 1.0 - 30.0 - 30.0 μA
CI input - - - 7.5 - - - - pF
capacitance

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 4 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

11. Dynamic characteristics


Table 7. Dynamic characteristics
Tamb = 25 °C; CL = 50 pF; tr = tf ≤ 20 ns unless otherwise specified.
For waveforms see Fig. 3; for test circuit see Fig. 4;
Symbol Parameter Conditions VDD Extrapolation formula [1] Min Typ Max Unit
tPHL HIGH to LOW nA to nY 5V 63 ns + (0.55 ns/pF)CL - 90 180 ns
propagation delay 10 V 29 ns + (0.23 ns/pF)CL - 35 70 ns
15 V 22 ns + (0.16 ns/pF)CL - 30 60 ns
tPLH LOW to HIGH nA to nY 5V 58 ns + (0.55 ns/pF)CL - 75 150 ns
propagation delay 10 V 29 ns + (0.23 ns/pF)CL - 35 70 ns
15 V 22 ns + (0.16 ns/pF)CL - 30 60 ns
tTHL HIGH to LOW output nY to LOW 5V 10 ns + (1.00 ns/pF)CL - 60 120 ns
transition time 10 V 9 ns + (0.42 ns/pF)CL - 30 60 ns
15 V 6 ns + (0.28 ns/pF)CL - 20 40 ns
tTLH LOW to HIGH output nY to HIGH 5V 10 ns + (1.00 ns/pF)CL - 60 120 ns
transition time 10 V 9 ns + (0.42 ns/pF)CL - 30 60 ns
15 V 6 ns + (0.28 ns/pF)CL - 20 40 ns

[1] Typical value of the propagation delay and output transition time can be calculated with the extrapolation formula (CL in pF).

Table 8. Dynamic power dissipation


VSS = 0 V; tr = tf ≤ 20 ns; Tamb = 25 °C.
Symbol Parameter VDD Typical formula where:
2
PD dynamic power 5V PD = 2300 × fi + Σ(fo × CL) × VDD (μW) fi = input frequency in MHz;
dissipation 10 V PD = 9000 × fi + Σ(fo × CL) × VDD (μW)
2 fo = output frequency in MHz;
2
CL = output load capacitance in pF;
15 V PD = 20000 × fi + Σ(fo × CL) × VDD (μW) Σ(fo × CL) = sum of the outputs;
VDD = supply voltage in V.

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 5 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

11.1. Waveforms and test circuit


tr tf
VI
90 %
input VM
10 %
0V

tPHL tPLH

VOH
90 %
output VM
10 %
VOL
tTHL tTLH
001aag197

Measurement points are given in Table 9.


Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
tr, tf = input rise and fall times.
Fig. 3. Propagation delay and output transition time

Table 9. Measurement points


Supply voltage Input Output
VDD VM VM
5 V to 15 V 0.5 × VDD 0.5 × VDD

VDD

VI VO
G DUT

RT CL

001aag182

Test data given in Table 10.


Definitions for test circuit:
CL = load capacitance including jig and probe capacitance;
RT = termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig. 4. Test circuit for measuring switching times

Table 10. Test data


Supply voltage Input Load
VDD VI tr, tf CL
5 V to 15 V VSS or VDD ≤ 20 ns 50 pF

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 6 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

12. Transfer characteristics


Table 11. Transfer characteristics
VSS = 0 V; see Fig. 5 and Fig. 6.
Symbol Parameter Conditions VDD Tamb = -40 °C to +85 °C Tamb = -40 °C to +125 °C Unit
Min Typ [1] Max Min Max
VT+ positive-going 5V 2.0 3.0 3.5 2.0 3.5 V
threshold voltage 10 V 3.7 5.8 7.0 3.7 7.0 V
15 V 4.9 8.3 11.0 4.9 11.0 V
VT- negative-going 5V 1.5 2.2 3.0 1.5 3.0 V
threshold voltage 10 V 3.0 4.5 6.3 3.0 6.3 V
15 V 4.0 6.5 10.1 4.0 10.1 V
VH hysteresis voltage 5V 0.5 0.8 - 0.5 - V
10 V 0.7 1.3 - 0.7 - V
15 V 0.9 1.8 - 0.9 - V

[1] All typical values are measured at Tamb = 25 °C.

VO VT+
VI VH
VT-

VO
VI
VH 001aag108
VT- VT+ 001aag107
Fig. 6. Waveform defining VT+ and VT- (between limits
Fig. 5. Transfer characteristic at 30% and 70%) and VH

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 7 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

001aal181 001aal182
100 1000
ID ID
(µA) (µA)
80 800

60 600

40 400

20 200

0 0
0 1 2 3 4 5 0 2 4 6 8 10
VI (V) VI (V)

a. VDD = 5 V; Tamb = 25 °C b. VDD = 10 V; Tamb = 25 °C


001aal183
2000
ID
(µA)
1600

1200

800

400

0
0 4 8 12 16 20
VI (V)

c. VDD = 15 V; Tamb = 25 °C

Fig. 7. Typical drain current as a function of input

001aal184
10
VI
(V)
8

VP

6
VN

0
2.5 7.5 12.5 17.5
VDD (V)

Tamb = 25 °C.
Fig. 8. Typical switching levels as a function of supply voltage

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 8 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

13. Application information


Some examples of applications for the HEF40106B are:
• Wave and pulse shapers
• Astable multivibrators
• Monostable multivibrators

R
CP

C C
001aal185
mna035

Fig. 10. Schmitt trigger driven via a


Fig. 9. Astable multivibrator high-impedance input

If a Schmitt trigger is driven via a high-impedance (R > 1 kΩ), then it is necessary to incorporate a

capacitor C with a value of ; otherwise oscillation can occur on the edges of a


pulse.
Cp is the external parasitic capacitance between inputs and output; the value depends on the circuit
board layout.

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 9 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

14. Package outline

SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

D E A
X

y HE v M A

14 8

Q
A2
(A 3) A
A1
pin 1 index
θ
Lp

1 7 L

e w M detail X
bp

0 2.5 5 mm
scale

DIMENSIONS (inch dimensions are derived from the original mm dimensions)


A
UNIT A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ
max.
0.25 1.45 0.49 0.25 8.75 4.0 6.2 1.0 0.7 0.7
mm 1.75 0.25 1.27 1.05 0.25 0.25 0.1
0.10 1.25 0.36 0.19 8.55 3.8 5.8 0.4 0.6 0.3 8
o
o
0.010 0.057 0.019 0.0100 0.35 0.16 0.244 0.039 0.028 0.028 0
inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004
0.004 0.049 0.014 0.0075 0.34 0.15 0.228 0.016 0.024 0.012

Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

OUTLINE REFERENCES EUROPEAN


ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION

99-12-27
SOT108-1 076E06 MS-012
03-02-19

Fig. 11. Package outline SOT108-1 (SO14)

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 10 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1

D E A
X

y HE v M A

14 8

Q
A2 (A 3 )
A
A1
pin 1 index

θ
Lp
L
1 7
detail X
w M
e bp

0 2.5 5 mm
scale

DIMENSIONS (mm are the original dimensions)


A
UNIT A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ
max.

mm
0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.72 8o
1.1 0.25 0.65 1 0.2 0.13 0.1
0.05 0.80 0.19 0.1 4.9 4.3 6.2 0.50 0.3 0.38 0o

Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

OUTLINE REFERENCES EUROPEAN


ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION

99-12-27
SOT402-1 MO-153
03-02-18

Fig. 12. Package outline SOT402-1 (TSSOP14)

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 11 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

15. Abbreviations
Table 12. Abbreviations
Acronym Description
CMOS Complementary Metal-Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model

16. Revision history


Table 13. Revision history
Document ID Release date Data sheet status Change notice Supersedes
HEF40106B v.10 20221007 Product data sheet - HEF40106B v.9
Modifications: • Table 7: Typo corrected.
HEF40106B v.9 20211122 Product data sheet - HEF40106B v.8
Modifications: • The format of this data sheet has been redesigned to comply with the identity
guidelines of Nexperia.
• Legal texts have been adapted to the new company name where appropriate.
• Section 1 and Section 2 updated.
• Table 4: Derating values for Ptot total power dissipation updated.
HEF40106B v.8 20151210 Product data sheet - HEF40106B v.7
Modifications: • Type number HEF40106BP (SOT27-1) removed.
HEF40106B v.7 20111121 Product data sheet - HEF40106B v.6
Modifications: • Legal pages updated.
• Changes in Section 1 and Section 2.
HEF40106B v.6 20110823 Product data sheet - HEF40106B v.5
HEF40106B v.5 20110511 Product data sheet - HEF40106B v.4
HEF40106B v.4 20101115 Product data sheet - HEF40106B_CNV v.3
HEF40106B_CNV v.3 19950101 Product specification - HEF40106B_CNV v.2
HEF40106B_CNV v.2 19950101 Product specification - -

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 12 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger
injury, death or severe property or environmental damage. Nexperia and its

17. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Quick reference data — The Quick reference data is an extract of the
Data sheet status product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product Definition Applications — Applications that are described herein for any of these
[1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation
Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use
data sheet the objective specification for without further testing or modification.
product development. Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
Preliminary [short] Qualification This document contains data from
any assistance with applications or customer product design. It is customer’s
data sheet the preliminary specification.
sole responsibility to determine whether the Nexperia product is suitable
Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as
data sheet specification. for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
[1] Please consult the most recently issued document before initiating or
completing a design. Nexperia does not accept any liability related to any default, damage, costs
[2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s
[3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party
changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the
multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to
the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions Limiting values — Stress above one or more limiting values (as defined in
Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent
internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper)
modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those
warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the
and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
Short data sheet — A short data sheet is an extract from a full data sheet
the quality and reliability of the device.
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are
detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as
full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed
office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is
full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
Product specification — The information and data provided in a Product
terms and conditions with regard to the purchase of Nexperia products by
data sheet shall define the specification of the product as agreed between
customer.
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted
valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the
beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
Disclaimers may be subject to export control regulations. Export might require a prior
Limited warranty and liability — Information in this document is believed authorization from competent authorities.
to be accurate and reliable. However, Nexperia does not give any
Non-automotive qualified products — Unless this data sheet expressly
representations or warranties, expressed or implied, as to the accuracy
states that this specific Nexperia product is automotive qualified, the
or completeness of such information and shall have no liability for the
product is not suitable for automotive use. It is neither qualified nor tested in
consequences of use of such information. Nexperia takes no responsibility
accordance with automotive testing or application requirements. Nexperia
for the content in this document if provided by an information source outside
accepts no liability for inclusion and/or use of non-automotive qualified
of Nexperia.
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
In the event that customer uses the product for design-in and use in
special or consequential damages (including - without limitation - lost
automotive applications to automotive specifications and standards,
profits, lost savings, business interruption, costs related to the removal
customer (a) shall use the product without Nexperia’s warranty of the
or replacement of any products or rework charges) whether or not such
product for such automotive applications, use and specifications, and (b)
damages are based on tort (including negligence), warranty, breach of
whenever customer uses the product for automotive applications beyond
contract or any other legal theory.
Nexperia’s specifications such use shall be solely at customer’s own risk,
Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed
whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for
for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s
Terms and conditions of commercial sale of Nexperia. product specifications.
Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for
to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy
specifications and product descriptions, at any time and without notice. This between the translated and English versions.
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and
systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners.
of an Nexperia product can reasonably be expected to result in personal

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 13 / 14


Nexperia HEF40106B
Hex inverting Schmitt trigger

Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Ordering information....................................................1
5. Functional diagram.......................................................2
6. Pinning information......................................................2
6.1. Pinning.........................................................................2
6.2. Pin description............................................................. 2
7. Functional description................................................. 3
8. Limiting values............................................................. 3
9. Recommended operating conditions..........................3
10. Static characteristics..................................................4
11. Dynamic characteristics.............................................5
11.1. Waveforms and test circuit........................................ 6
12. Transfer characteristics............................................. 7
13. Application information............................................. 9
14. Package outline........................................................ 10
15. Abbreviations............................................................ 12
16. Revision history........................................................12
17. Legal information......................................................13

© Nexperia B.V. 2022. All rights reserved


For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: [email protected]
Date of release: 7 October 2022

HEF40106B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2022. All rights reserved

Product data sheet Rev. 10 — 7 October 2022 14 / 14

You might also like