PRODUCTION

& ASSEMBLY
PRODUCT CATALOG
 WHY MAKITA CORDLESS?
®

INNOVATIVE CORDLESS TECHNOLOGY

Makita designs and manufactures innovative cordless tools utilizing the latest advanced
technology that allows professionals the ability to use cordless tools on tasks previously
thought to be impossible. Our goal in designing manufacturing & assembly cordless tools
is to break away from the historical method of costly air hose operation and allow the
operator freedom with a powerful, accurate and ergonomic solution.

Makita’s launch of the Torque-Tracer wireless data communication tools add additional
value within the manufacturing environment by providing features with improved Quality
Assurance methods. Torque-Tracer’s ability to capture fastening characteristics adds a
traceability and communication component to quality management with subsequent gains
in productivity.

REDUCED ENERGY COSTS

Less Energy Consumption needed to power cordless tools than to power pneumatic tooling.
Extreme Energy Savings by eliminating air line and air tool leakage.
Higher Quality Control by reducing damage to manufactured products often caused by hoses and cords.
Reduced Operating Costs and down time by eliminating oilers and oil maintenance.
Reduced Maintenance Costs by minimizing down time to repair damaged products.

MORE FREEDOM
More Flexibility to roam from one workspace to the next
Greater Access and Maneuverability in confined workspaces and inside closed compartments
Increased Efficiency with the ability to interchange tools from one application to the next
Easier to Reposition Fastening System when assembly lines need to be rerouted, expanded or eliminated
Quicker Recoveries from power interruptions

SAFER WORKPLACE
Reduced Hazards caused by air hoses laying across floors or hanging from ceiling
Lighter Weight with Ergonomic Design for operator control
Lower Vibration and Noise for operator comfort
Environmentally Friendly low toxicity battery platforms

BRUSHLESS LOW-REACTION
MOTOR TECHNOLOGY
UP TO 50% LONGER MOTOR LIFE BENEFITS
The Makita-built brushless motor eliminates carbon brushes, enabling Dramatically reduces repetitive motion stress experience when
the motor to run cooler and more efficiently for longer life. operating clutch-based tools within assembly facilities.
The electronically-controlled brushless motor efficiently uses energy to Reduces cumulative wrist strain, operator fatigue, lowers the instance
match torque and RPM to the changing demands of the application. of injury caused by repetitive fastening tasks, and can reduce
company healthcare costs related to repetitive motion stress.

TECHNOLOGY
Clutch components utilizing proprietary, patented technology significantly
reduces the "kickback" experienced once final torque is applied by clutch tooling
Available as a retrofit to existing BFT, BFL*, and DFT** Series Makita
clutch tools, or included as OEM component on new tools.

*Available for BFL300FZ, 301RZ, 400FZ, and 402RZ models.

**Available for DFT085FMZ and 127FMZ models

2 Learn more at makitaassemblytools.com

 PRODUCTION
& ASSEMBLY PRODUCT CATALOG

BRUSHLESS PROGRAMMABLE SCREWDRIVERS

PAGE 4

ASSEMBLY PISTOL SCREWDRIVERS

PAGE 6

PRECISE CONTROL RIGHT ANGLE NUT-RUNNERS

PAGE 8

BRUSHLESS PRECISE CONTROL RIGHT ANGLE NUT-RUNNERS

PAGE 9

TORQUE TRACER
PAGE 10

PROGRAMMABLE SHUT-OFF IMPACTS

PAGE 12

HAZLOC® SCREWDRIVERS
PAGE 14

ACCESSORIES
PAGE 15

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 3
SCREWDRIVERS

BRUSHLESS
PROGRAMMABLE
SCREWDRIVERS
PRECISE TORQUE CONTROL SCREWDRIVERS

Lightweight and Ergonomic Color-Coded Identification Plate

Only 6-3/4" in length and weighs only With unique I.D. number
2.4 lbs. with battery
(DFT023FMZ and DFT045FMZ models)

Large Pass/Fail L.E.D.

Indicates sufficient and
Built-In L.E.D. Light insufficient fastening
Illuminates work surface achievement and audibly alerts
for better visibility in low operator to failed fastenings
light environments

6-Phase Rundown Programming

Brushless Motor RPM and Directional programing
Makita-built motor technology via USB port for multi-stage
provides higher speeds and rundown control. Provides better
advanced monitoring quality fastening and assists
in cross-thread detection.

Lithium-Ion Battery
For extended run time and
total lifetime charge cycles

MAINTENANCE MODE
Audible Signal
• Included software has the ability to pre-program
For incomplete
or bad fastening
a maintenance cycle
• Tool notifies operator at maintenance
interval for calibration and/or preventative
maintenance needed

SMART SYSTEM
Auto Battery Shutoff
• Shuts off the tool when battery
capacity is less than 5%
• Ensures consistent fastening torque
DFT045FMZ
14.4V Lithium-Ion Brushless
Cordless 1/4" Hex Screwdriver
(Battery not included)

PASS/FAIL L.E.D. LAMP RPM & DIRECTIONAL

Large Pass/fail lamp indicates sufficient and PROGRAMMING
insufficient fastening achievement and audibly RPM and Directional programing via
alerts operator to failed fastenings. USB for multi-stage rundowns.

4 Learn more at makitaassemblytools.com

PRECISE TORQUE CONTROL SCREWDRIVERS

DFT023FMZ DFT045FMZ DFT085FMZ / DFT085FMAZ* DFT127FMZ / DFT127FMAZ*

Voltage 14.4V 14.4V 14.4V 14.4V

Capacities 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank

Fastening Torque .5-2 Nm (4-18 in. lbs.) 1-4 Nm (9-35 in. lbs.) 3-8 Nm (27-71 in. lbs.) 5-12 Nm (44-106 in. lbs.)

No Load Speed (RPM) 400 - 1,300 150 - 900 150 - 900 100 - 600

Length (w/Battery) 6-1/4” 6-1/4" 7-1/2” 7-1/2”

Height (w/Battery) 9-3/4” 9-3/4" 10” 10”

Width (w/Battery) 2-13/16” 2-13/16" 2-13/16” 2-13/16”

Weight (w/Battery) 2.4 lbs. 2.4 lbs. 2.9 lbs. 2.9 lbs.

Battery BL1430B, BL1415NA BL1430B, BL1415NA BL1430B, BL1415NA BL1430B, BL1415NA

*FMAZ suffix indicates Low-Reaction model.

LITHIUM-ION BATTERY BRUSHLESS MOTOR

Precision sensor informs operator of insufficient battery Makita-Built motor technologies provide higher
charge level through visual and audible indicators. speeds and advanced monitoring.

BUILT-IN L.E.D. LIGHT TORQUE ACCURACY

Built-in L.E.D. light illuminates work surface for “Real World” accuracy has earned certification within
better visibility in low light environments. major Automotive and Aerospace Assemblers achieving
repeatability within 4% of mean torque.

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 5
SCREWDRIVERS

ASSEMBLY PISTOL
SCREWDRIVERS
PRECISE CONTROL SCREWDRIVERS

Torque Set Window Color Coded ID Plate

Allows the operator to view the For easy tool and application
desired torque setting identification

Rubber Chuck Cover

Protects the workpiece

Smooth Shut-Off Operation

"Quick-Change" 1/4" Hex Chuck Once preset torque is achieved,
the clutch activates, automatically
Accepts standard 1/4" hex bits halting applied torque

Externally Accessible Brushes

Built-in L.E.D. Lamps
Allows for easy service replacement
Illumintates the work surface for better and extended motor life
visibility in low light environments

Two-Piece d-28R Motor

Forward/Reverse Switch
Replaceable armature and powerful
Conveniently located for increased rare earth magnet
comfort and efficiency

Large On/Off Switch

Equipped with a delayed re-start

Pass/Fail Indicator Lamp

Nut and Bolt Construction & Audible Signal
Allows repeat disassembly, Provides operator with immediate
preventing damage to the housing feedback on fastening achievement

Anti-Slip Dimpled Grip

Provides comfort and operator control USER-FRIENDLY
ELECTRONIC CONTROLS
BFT126FZ
Utilizing ISO5393 Standards 14.4V Lithium-Ion Cordless • Soft start to suppress reaction and allow for smooth fastening
All BFT Series models provide Cm 1/4" Hex Screwdriver • One-second restart delay minimizes
ratings > 1.67 (Battery not included) the potential for operator double-hits
• Delayed restarter controls the motor so that it doesn’t start
until one second passes after a screw has been driven; the motor
Torque Accuracy does not start even if switch trigger is pulled
• Reduces deviation from pre-set fastening torque caused by
+/- 10% with Cm ≥ 1.67
unintentional over-tightening environment

14.4v

REPETITIVE ACCURACY SMART SYSTEM

Torque Accuracy Auto Battery Shutoff
• Long-life clutch provides consistent operation within • Shuts off the tool when battery capacity
+/-10% of mean torque with real-world is less than 5%.
repeatability consistencies within +/-4%. • Ensures consistent fastening torque.

Indication Lamp and Audible Alert

• Precision sensor indicates fastening
sufficiency and battery power conditions
with light and/or audible alert.

6 Learn more at makitaassemblytools.com

PRECISE TORQUE CONTROL SCREWDRIVERS

BFT022FZ BFT044FZ BFT083FZ

Voltage 14.4V 14.4V 14.4V

Capacities 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank

Fastening Torque 0.5-2.0 Nm (4-18 in. lbs.) 1-4 Nm (9-35 in. lbs.) 3-8 Nm (27-71 in. lbs.)

No Load Speed (RPM) 700 950 80

Length 7-7/8" 7-7/8" 7-7/8"

Height (w/Battery) 10-1/4" 10-1/4" 10-1/4"

Width 2-9/16" 2-9/16" 2-13/16"

Weight (w/Battery) 3.3 lbs 3.3 lbs 3.3 lbs

Battery BL1430B, BL1415NA BL1430B, BL1415NA BL1430B, BL1415NA

BFT084FZ / BFT084FAZ* BFT126FZ / BFT126FAZ*

Voltage 14.4V 14.4V

Capacities 1/4" Hex Shank 1/4" Hex Shank

Fastening Torque 3-8 Nm (27-71 in. lbs.) 5-12 Nm (44-106 in. lbs.)

No Load Speed (RPM) 780 410

Length 7-7/8" 7-7/8"

Height (w/Battery) 10-1/2" 10-1/4"

Width 2-9/16" 2-9/16"

Weight (w/Battery) 3.3 lbs 3.3 lbs

Battery BL1430B, BL1415NA BL1430B, BL1415NA

*FAZ suffix indicates Low-Reaction model.

ADVANCED TECHNOLOGY LOW OWNERSHIP

Two-Piece D-28 Motor COST
• Replaceable armature allows greater Designed for High Endurance Applications
serviceability. • Nut and bolt housing assembly ensures
• Dual sealed ball bearings for less friction and long term housing integrity.
greater efficiency. • Replaceable brushes easily accessed without
• High performance fan reduces temperatures the need to open the tool housing.
and increases tool life. • Solder-less internal components
• High-grade magnet generates maximum for easy and fast replacement.
performance.

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 7
RIGHT ANGLE NUT-RUNNERS

BRUSHLESS PRECISE CONTROL

RIGHT ANGLE NUT-RUNNERS
BUILT-IN ELECTRONIC SYSTEM

• Soft start to suppress reaction and allow USB Port

for smooth fastening For RPM and directional
• One-second restart delay minimizes the potential programming for multi-stage
for operator double-hits rundown control
• Reduces deviation from pre-set fastening torque
caused by unintentional over-tightening environment Color Coded ID Plate
For easy tool and application
identification

14.4v
Pass/Fail Indicator Lamp
& Audible Signal

DFL083FZ
Built-in Job Light 14.4V Lithium-Ion Brushless Cordless
3/8" Sq. Drive Angle Nut Runner
Iluminates work surface for better
(Battery not included)
visibility in low light environments

DFL083FZ DFL083F5Z DFL125FZ DFL125F5Z DFL204FZ

Voltage 14.4V 14.4V 14.4V 14.4V 14.4V

Capacities 3/8" Square Drive 1/4" Square Drive 3/8" Square Drive 1/4" Square Drive 3/8" Square Drive

Fastening Torque 2-8 Nm (18-71 in. lbs.) 2-8 Nm (18-71 in. lbs.) 5-12 Nm (44-106 in. lbs.) 5-12 Nm (44-106 in. lbs.) 8-20 Nm (71-177 in. lbs.)

No Load Speed (RPM) 150 - 700 150 - 700 100 - 700 100 - 700 100 - 440

Length (w/Battery) 22 22 22 22 22

Height (w/Battery) 3-5/32" 3-5/32" 3-5/32" 3-5/32" 3-5/32"

Width 4-11/64" 4-11/64" 4-11/64" 4-11/64" 4-11/64"

Weight (w/Battery) 4.7 lbs. 4.7 lbs. 4.7 lbs. 4.7 lbs. 4.7 lbs.

Battery BL1430B/BL1460A BL1430B/BL1460A BL1430B/BL1460A BL1430B/BL1460A BL1430B/BL1460A

RPM & DIRECTIONAL PASS/FAIL INDICATOR

PROGRAMMING LAMP
RPM and directional programming via USB • Indicates sufficient and insufficient fastening
port for multi-stage rundown control achievement and audibly alerts operator to
failed fastenings.

8 Learn more at makitaassemblytools.com

BRUSHLESS PRECISE CONTROL
RIGHT ANGLE NUT-RUNNERS
TORQUE-SPECIFIC TO INSTALL FASTENERS ACCURATELY
"Real World" accuracy has earned certification within major automotive and aerospace assemblers
achieving repeatability within 4% of mean torque

Pass/Fail Indicator Lamp

& Audible Signal 18V LXT Compatibility
Indicates sufficient and insufficient
Makita’s 18V LXT® battery is
fastening achievement and audibly
compatible with over 175 LXT®
alerts operator to failed fastenings
cordless tools

Built-in L.E.D. Light Programmable Speed Control Mounting Holes

DFL651FZ
18V LXT® Lithium-Ion Cordless Illuminates work surface for better 80-200 RPM; down shift and Allow for easy fixturing and
High Torque 3/8" Angle Nut Runner visibility in low light environments counterclockwise rundown capabilities balancing
(Battery not included)
6-Phase Rundown Programming
for better quality fastenings

DFL302FZ/DFL302FAZ*† DFL403FZ / DFL403FAZ*† DFL651FZ† / DFL651FAZ*†

Voltage 14.4V 14.4V 18V LXT®

Capacities 3/8" Square Drive 3/8" Square Drive 3/8" Square Drive

Fastening Torque 16-30 Nm (142-266 in. lbs.) 25-40 Nm (221-354 in. lbs.) 25-65 Nm (221-575 in. lbs.)

No Load Speed (RPM) 70 - 230 50 - 220 80-200

Length (w/Battery) 22 22 23"

Height (w/Battery) 3-5/32" 3-5/32" 4-9/16"

Width (w/Battery) 4-11/64" 4-11/64" 2-15/16"

Weight (w/Battery) 5.1 lbs. 5.1 lbs. 6 lbs

Battery BL1430B/BL1460A BL1430B/BL1460A BL1830B, BL1840B, BL1850B

*FAZ suffix indicates Low-Reaction model.

†
Programmability via USB port.

BALANCING/TETHERING BUILT-IN L.E.D. LIGHT

• Conveniently placed threaded holes on the • Built-in L.E.D. light illuminates work surface
top and side of tool allow for easy balancing for better visibility in low light environments.
or tethering in your workstation application.

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 9
SCREWDRIVERS

TORQUE TRACER
SMART TOOLS PROVIDING QUALITY ASSURANCES
VIA WIRELESS COMMUNICATION
• Identifies multiple fastening characteristics for each rundown
• Flexible systems conform to a broad variety of environments
• Maintains cordless freedom of operator benefits while improving quality assurance best practices
• Provides an energy efficient alternative to pneumatic platforms involving verifiers/qualifiers
• Adds traceability measures in environments wanting cordless flexibility and safety
• An alternative to expensive DC electric tool platforms
• Uses Bluetooth frequency spectrum and Adaptive Frequency Hopping
to assure an interference-free environment

14.4v ®

"Quick Change" 1/4" Hex Chuck Built-in L.E.D. Lamps

Long-life Clutch for High Repeatability Makita-Built Brushless Motor

Auto-Stop Fastening Functioning Long-life Clutch for High Repeatability

Built-in L.E.D. Lamps Torque Set Window

Makita-Built Brushless Motor Slim-Line Anti-Slip Dimpled Grip

Slim-Line Anti-Slip Dimpled Grip L.E.D. Operator Signal and Audible Alarm

L.E.D. Operator Signal and Audible Alarm Auto Battery Shutoff

Auto Battery Shutoff

BFT041RZ BFL201RZ
14.4V Lithium-Ion Cordless 1/4" Hex 14.4V Lithium-Ion Cordless
Torque Tracer Screwdriver 3/8" Sq. Drive Torque Tracer
(Battery not included) Angle Nut Runner
(Battery not included)

®
Model: RCV02

BLUETOOTH® RECEIVER BRUSHLESS MOTOR 14.4V LITHIUM-ION

Bluetooth receiver provides communication with tool. Makita-Built motor technologies provide higher High productivity with reduced weight.
24v discreet I/O for PASS/FAIL/BATCH to communicate with PLC. speeds and advanced monitoring. Very low self-discharge rates.
Serial port for downloading fastening data and torque values to PC.

10 Learn more at makitaassemblytools.com

TORQUE-TRACER WIRELESS COMMUNICATION TOOLS

BFT041RZ BFT082RZ / BFT082RAZ BFT124RZ / BFT124RAZ

Voltage 14.4V 14.4V 14.4V

Capacities 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank

Fastening Torque 1-4 Nm (9-35 in. lbs.) 4-8 Nm (35-71 in. lbs.) 6-12 Nm (53-106 in. lbs.)

No Load Speed (RPM) 800 860 600

Length 7-1/2" 7-1/2" 7-1/2"

Height (w/Battery) 10-1/2" 10-1/2" 10-1/2"

Width 2-13/16" 2-13/16" 2-13/16"

Weight (w/Battery) 3.3 lbs 3.3 lbs 3.3 lbs

Battery BL1430B BL1430B BL1430B

*RAZ suffix indicates Low-Reaction model.

BFL201RZ / BFL201RAZ* BFL301RZ / BFL301RAZ* BFL402RZ / BFL402RAZ*

Voltage 14.4V 14.4V 14.4V

Capacities 3/8" Sq. Drive 3/8" Sq. Drive 3/8" Sq. Drive

Fastening Torque 10-20 Nm (89-177 in. lbs.) 16-30 Nm (142-266 in. lbs.) 25-40 Nm (221-354 in. lbs.)

No Load Speed (RPM) 360 260 200

Length 16-7/8" 18-3/4" 18-3/4"

Height (w/Battery) 3-7/8" 3-7/8" 3-7/8"

Width 2-13/16" 2-13/16" 2-13/16"

Weight (w/Battery) 3.8 lbs 4.4 lbs 4.4 lbs.

Battery BL1430B BL1430B BL1430B

*RAZ suffix indicates Low-Reaction model.

TOOL RECOGNITION RCV02 Bluetooth® Receiver

(Optional)
• Fastening torque values
• Fastening angle values
• Rundown rotations Built-in Transmitter
• Tool ID recognition
• Time/date snap
• OK-NOK parameter achievement
• Batch achievement

PROGRAMMING INTERACTIVITY RS-232C Serial Cable/Serial Required Facility PC

(Available at a local PC supply store)
• Torque value tolerance range
• Angle value tolerance range
• Rundown rotation min/max settings
• Tool lock down mode
• Tool brake option
• Soft start adjustment
• Calibration ability
• Batch management (PLC-based)
• Log all data from tool recognition

11
IMPACTS

PROGRAMMABLE
SHUT-OFF IMPACTS
EXTRA-COMPACT DESIGN

14.4v Compact and Lightweight

4-Pole Motor

Rubberized Bit Sleeve

Protects workpiece from scratches
and damages

Single L.E.D. Job Light

With preglow and afterglow
functions

Indicating Lamp
Easy-to-Pull Trigger Switch Model: BTW104Z, BTD044Z,
With a 6mm short stroke is ideal BTD064Z, BTD104Z
for assembly and munfactiuring
applications. Minimizes operators
hand and finger fatigue in long,
continuous operation in assembly
and manufacturing applications

Ergonomically Designed Handle

Provides comfortable grip and
Automatic Impact Stop System more control while minimizing
Model: BTW104Z, BTD044Z, hand fatigue and pain
BTD064Z, BTD104Z

Color Coded Plates

For easy model identification

35 Nm

65 Nm

95 Nm

BTD044Z
14.4V Lithium-Ion Cordless
1/4" Hex Impact Driver
(Battery not included)
Powered by 14.4V
Lithium-Ion Batteries
With battery fuel guage

12 Learn more at makitaassemblytools.com

PROGRAMMABLE SHUT-OFF IMPACT DRIVERS

BTD044Z BTD064Z BTD104Z

Voltage 14.4V 14.4V 14.4V

Capacities 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank

Maximum Torque 35 Nm (26 ft. lbs.) 65 Nm (50 ft. lbs.) 95 Nm (70 ft. lbs.)

Rundown Programming Yes Yes Yes

No Load Speed (RPM) 0 - 2,300 0 - 2,500 0 - 2,700

Impacts Per Minute (IPM) 0 - 3,500 0 - 3,500 0 - 3,500

Length 6-7/16" 6-7/16" 6-5/8"

Height (w/Battery) 9-5/16" 9-5/16" 9-7/8"

Width 2-5/8" 2-5/8" 2-15/16"

Weight (w/Battery) 2.4 lbs. 2.4 lbs. 2.4 lbs.

Battery BL1415NA BL1415NA BL1415NA

PROGRAMMABLE SHUT-OFF IMPACT WRENCHES

BTW104Z BTW151Z

Voltage 14.4V 14.4V

Capacities 3/8" Square Drive 1/2" Square Drive

Maximum Torque 95 Nm (70 ft. lbs.) 150 Nm (110 ft. lbs.)

Rundown Programming Yes Yes

No Load Speed (RPM) 0 - 2,700 0 - 2,300

Impacts Per Minute (IPM) 0 - 3,500 0 - 3,000

Length 5-11/16" 7-5/8"

Height (w/Battery) 9-7/8" 10"

Width 2-15/16" 3-1/16"

Weight (w/Battery) 2.4 lbs. 4.2 lbs.

Battery BL1415NA BL1430B

ADVANCED TECHNOLOGY PASS/FAIL INDICATOR

Vari-Torque System LAMP
• Pre-set the tool to stop at the programmed • Indicates sufficient and insufficient fastening
number of impacts, providing achievement and audibly alerts operator to
consistent torque when fastening. failed fastenings.

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 13
 CLASS I DIVISION 2 RATED
• UL listed for Class I Division 2 locations for maximum 50°C ambient
"Quick Change" 1/4" Hex Shank Chuck
• Meets the NEC Article 513 Aircraft Hangar
requirements for Class I Division 2 locations
• Tested to Mil Standard 810F, Method 511.4 Torque Adjusting System

Built-In L.E.D. Light

Auto-Stop Fastening Function

Anti-Slip Dimpled Grip

Beeper Indicator

L.E.D. Indicator

HAZLOC® SCREWDRIVERS

BFH040FRAE BFH040RAE BFH090FRAE BFH090RAE BFH120FRAE

Voltage 12V 12V 12V 12V 12V

Capacities 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank 1/4" Hex Shank

Max Fastening Torque (Nm) 0.8-4.5 Nm (7-40 in. lbs.) 0.8-4.5 Nm (7-40 in. lbs.) 3.4-9.0 Nm (30-80 in. lbs.) 3.4-9.0 Nm (30-80 in. lbs.) 5.0-12.0 Nm (44-106 in. lbs.)

No Load Speed (RPM) 400 400 400 400 400

L.E.D. Lamp YES NO YES NO YES

L.E.D. Pass/Fail YES YES YES YES YES

Audible Signal YES NO YES NO YES

Length 7-15/32" 7-15/32" 7-15/32" 7-15/32" 7-15/32"

Height 10-15/32" 10-15/32" 10-15/32" 10-15/32" 10-15/32"

Width 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16"

Weight 3.3 lbs 3.3 lbs 3.3 lbs 3.3 lbs 3.3 lbs

Battery BH1220 BH1220 BH1220 BH1220 BH1220

REPETITIVE ACCURACY SMART SYSTEM

Torque Accuracy Auto Battery Shutoff
• Long-life clutch provides consistent operation within • Shuts off the tool when battery capacity
+/-10% of mean torque with real-world repeatability is less than 5%.
consistencies within +/-4%. • Ensures consistent fastening torque.

Indication Lamp and Audible Alert

• Precision sensor indicates fastening
sufficiency and battery power conditions
with light and/or audible alert.

14 Learn more at makitaassemblytools.com

BATTERIES AND CHARGERS

Model No. Battery Voltage Cell Type Amp Hours Charge Time Charger(s)

BL1430B BL1430B 14.4V Lithium-Ion 3.0Ah 22 Minutes

DC18RC, DC18RD,
DC18SF
BL1415NA BL1415NA 14.4V Lithium-Ion 1.5Ah 20 Minutes

BL1820B BL1820B 18 V LXT® Lithium-Ion 2.0Ah 25 Minutes

BL1830B BL1830B 18 V LXT® Lithium-Ion 3.0Ah 30 Minutes

DC18RC, DC18RD,
BL1840B BL1840B 18 V LXT® Lithium-Ion 4.0Ah 40 Minutes
DC18SF
BL1850B BL1850B 18 V LXT® Lithium-Ion 5.0Ah 45 Minutes

BL1860B BL1860B 18 V LXT® Lithium-Ion 6.0Ah 55 Minutes

193931-1 BH1233C MAKSTAR 12 V ®

Ni-MH 3.3Ah 60 Minutes
DC18RC, DC18RD
193929-8 BH1220C MAKSTAR® 12 V Ni-MH 2.0Ah 30 Minutes

Model No. Description Voltage Cell Type Battery

BL1820B, BL1830B, BL1840B,

DC18RC 18V LXT® Lithium-Ion Rapid Optimum Charger 12V - 18V Lithium-Ion & Ni-MH BL1850B,BL1860B, BL1415NA, BL1430B,
BH1220C, BH1233C

BL1820B, BL1830B, BL1840B,

DC18RD 18V LXT® Lithium-Ion Dual Port Rapid Optimum Charger 12V - 18V Lithium-Ion & Ni-MH BL1850B,BL1860B, BL1415NA, BL1430B,
BH1220C, BH1233C

BL1820B, BL1830B, BL1840B,

DC18SF 18V LXT® Lithium-Ion 4-Port Charger 14.4V - 18V Lithium-Ion
BL1850B,BL1860B, BL1415NA, BL1430B

193681-8 Battery Refreshing Adaptor 9.6V - 12V Ni-MH BH1233C, BH1220C

PRODUCTION TOOLING ACCESSORIES

BFT & BFL STANDARD TOOL COVER BTD SHUT-OFF IMPACT TOOL COVERS

Part No. Color Applicable Models Part No. Color Description

Pistol 454420-4 Blue
450331-1 Clear 454421-2 Clear Fits all Compact BTD impacts
418425-8 Red BFT022FZ, BFT044FZ/041RZ, 454422-0 Red
418424-0 Blue BFT084FZ/082RZ, BFT126FZ/124RZ
DFT STANDARD TOOL COVERS
418423-2 Yellow
Part No. Color Description
Right Angle
418066-0 Clear 424984-2 Clear
418065-2 Red 424985-0 Red
BFL082FZ, BFL122FZ, DFT023FMZ & DFT045FMZ
418064-4 Blue 424986-8 Blue
BFL202FZ/201RZ
418032-7 Yellow
424987-6 Yellow DF012DSE
424969-8 Clear 7.2V Lithium-Ion Cordless
BFT LOW-REACTION TOOL COVER 424968-0 Red 1/4" Hex Driver-Drill Kit
DFT085FMZ & DFT127FMZ
424967-2 Blue with Auto-Stop Clutch
Part No. Color Applicable Models
424966-4 Yellow Makita-built motor delivers 71 in.lbs.
Pistol of Max Torque in a compact design
A-51281 Clear DFT LOW REACTION TOOL COVERS
A-51275 Red BFT084FAZ/082RAZ, Part No. Color Description
A-51269 Blue BFT126FAZ/124RAZ 424973-7 Clear
A-51253 Yellow 424972-9 Red DFT085FMAZ & DFT127FMAZ
424971-1 Blue Low Reaction
BFL RIGHT ANGLE TWO-PIECE SETS (Set Requires both A & B)
424970-3 Yellow
Part No. Color Applicable Models
BL1430B & BL1415NA BATTERY COVER
418745-0 Clear
418744-2 Red Part No. Color Description
(A) BFL300FZ/FAZ, 301RZ/RAZ,
418743-4 Blue BFL400FZ/FAZ, 402RZ/RAZ 450599-9 Clear BL1430B Battery Cover
418691-7 Yellow 454407-6 Clear BL1415NA Battery Cover
418748-4 Clear TORQUE ADJUSTING KEY
418747-6 Red
418746-8 Blue (B) BFL300FZ/FAZ, 301RZ/RAZ Part No. Description Applicable Models TD012DSE
7.2V Lithium-Ion Cordless
418692-5 Yellow
1/4" Hex Impact Driver Kit
418751-5 Clear 765025-8 All clutch tools
Makita-built motor delivers 195 in.lbs.
418750-7 Red of Max Torque in a compact design
418749-2 Blue (B) BFL400FZ/FAZ, 402RZ/RAZ Torque Adjusting Key
418693-3 Yellow

To find a dealer near you, call us at 800-867-8265 Ext: 3121 7AM -4PM CST 15
 SMALLER. LIGHTER.
SMARTER.

ADVANCED
ERGONOMICS
6-STAGE
PROGRAMMABLE
PRECISION FASTENING
ONLY 6-3/8" • Spindle Direction by Time
IN LENGTH or Rotation
• Speed Management by
ONLY 2.4 LBS. Time or Rotation
WITH BATTERY
• Finishing Strategy

ALSO FEATURES PREVENTATIVE

DFT045FMZ MAINTENANCE SCHEDULING
14.4V Lithium-Ion Cordless
1/4" Hex Screwdriver

999CAT3 MAK-0516 MA-6607-16

The MAKITA® TEAL COLOR is the trade dress of Makita® Corporation and is protected under common law and
registered with the U.S. Patent and Trademark Office. The Makita® Black & White color combination is the trade
makitaassemblytools.com dress of Makita® Corporation and is protected under common law with the U.S. Patent and Trademark Office.