HC/ATEX

HC/ATEX
Wall-mounted axial fans with ATEX
certification and possible Ex e,
Ex d, Ex tc and Ex tb markings

Ex “e” marked: II 2G Ex e
Wall-mounted axial fans with ATEX certification, with Ex “d” marked: II 2G Ex d
CEE ExII2G Ex e explosion-proof and CEE ExII2G Ex tc marked: II 3D Ex tc
Ex d, Ex tc, or Ex tb flame-resistant motor to work in Ex tb marked: II 2D Ex tb
explosive atmospheres of gas or dust. Notified authority: L.O.M
Identification No:
Fan: LOM3ATEX0157
• Impeller made from cast aluminium
• Airflow direction from motor to impeller
• Stuffing-box spark-proof included
• Protection guard against contacts, in accordance
HC-25...63 with standard UNE-EN ISO 12499:2010 included Finish:
in models 25 to 63, other models as accessory. • Rust retardant finish with ATEX paint,
• Support frame in sheet steel with aluminium strip containing no ferrous components, in
in the impeller area in accordance with Standard polyester resin polymerised at 190ºC, after
EN-14986:2007 phosphate free pre-treatment

Motor: On request:
• Class F motors with ball bearings and ATEX • Built-in motors with PTC
certification, Ex e explosion-proof • Special windings for different
and Ex d, Ex tc, or Ex tb flame-resistant electrical supplies and frequencies
• Three phase, 50Hz, 230/400V motors up to and • ATEX construction for different categories
including 4kW. 400/690V over 4kW • Fans with two-speed motor.
HC-71...100 • Fan working temperature: -20ºC + 40ºC • Ex d flame-resistant single-phase motors

Order code

HC/ATEX 25 2T/H Ex-e I F

Air circulation Execution of

Wall-mounted axial fans, with ATEX Impeller Number of motor pole T=Three-phase Ex-e: marked:
motor II 2G Ex e IIB T3 I=Impeller the fan
diameter 2=2900 r/min. 50 Hz M=Single-phase
Ex “d” marked: Motor->Impeller
in cm. 4=1400 r/min. 50 Hz
Marked: II 2G Ex d IIB T5 Execution
6=900 r/min. 50 Hz H=High airflow
II 2G c Ex tc marked: standard
L=Low airflow
II 2D c II 3D Ex tc
II 3D c Ex tb marked: A=Airflow-in F=Motor
II 2D Ex tb Impeller->Motor impeller
unit guard

G=Motor
impeller unit

Technical characteristics

Maximum current Installed Maximum Sound pressure

Model Speed
admissible (A) power airflow level
(r/min) 230V 400V 690V (kW) (m3/h) dB(A)
HC/ATEX-25-2T/H 2730 0.74 0.43 0.12 2200 64
HC/ATEX-25-4T/H 1400 1.28 0.74 0.12 1300 51
HC/ATEX-31-2T/H 2760 1.21 0.70 0.18 3650 72
HC/ATEX-31-4T/H 1400 1.28 0.74 0.12 2400 54
HC/ATEX-31-4T/L 1320 0.65 0.38 0.09 1800 52
HC/ATEX-35-2T/H 2770 2.08 1.20 0.37 6050 76
HC/ATEX-35-4T/H 1400 1.28 0.74 0.12 3550 58
HC/ATEX-35-4T/L 1400 1.28 0.74 0.12 2600 56
HC/ATEX-40-4T/H 1370 2.08 1.20 0.25 5200 63
HC/ATEX-40-4T/L 1400 1.28 0.74 0.12 4050 59
HC/ATEX-40-6T/H 910 2.42 1.40 0.25 3700 55
HC/ATEX-45-4T/H 1370 2.60 1.50 0.37 7300 66
HC/ATEX-45-4T/L 1370 2.08 1.20 0.25 5600 63
HC/ATEX-45-6T/H 910 2.42 1.40 0.25 5150 57
HC/ATEX-50-4T/H 1410 2.94 1.70 0.55 10200 69
HC/ATEX-50-4T/L 1370 2.08 1.20 0.25 7400 66

134
 HC/ATEX

Technical characteristics

Maximum current Installed Maximum Sound pressure

Model Speed
admissible (A) power airflow level
(r/min) 230V 400V 690V (kW) (m3/h) dB(A)

HC/ATEX-50-6T/H 935 2.77 1.60 0.37 6300 59

HC/ATEX-56-4T/H 1410 5.20 3.00 1.10 13000 72
HC/ATEX-56-4T/L 1410 2.94 1.70 0.55 11050 70
HC/ATEX-56-6T/H 935 2.77 1.60 0.37 8300 61
HC/ATEX-63-4T/H 1410 5.20 3.00 1.10 16450 74
HC/ATEX-63-4T/L 1410 3.81 2.20 0.75 14400 73
HC/ATEX-63-6T/H 935 2.77 1.60 0.37 12350 64
HC/ATEX-71-4T/H 1400 6.93 4.00 1.50 22150 78
HC/ATEX-71-6T/H 930 4.16 2.40 0.75 17300 66
HC/ATEX-80-4T/H 1440 12.30 7.10 3.00 33000 82
HC/ATEX-80-4T/L 1400 6.93 4.00 1.50 25000 79
HC/ATEX-80-6T/H 930 4.16 2.40 0.75 22000 71
HC/ATEX-80-6T/L 930 3.46 2.00 0.55 19200 70
HC/ATEX-90-4T/H 1450 15.76 9.10 4.00 43700 86
HC/ATEX-90-4T/L 1440 12.30 7.10 3.00 33700 83
HC/ATEX-90-6T/H 940 7.62 4.40 1.50 33300 76
HC/ATEX-90-6T/L 910 5.89 3.40 1.10 26550 73
HC/ATEX-100-4T/H 1440 12.00 6.93 5.50 54000 88
HC/ATEX-100-4T/L 1450 15.76 9.10 4.00 42750 84
HC/ATEX-100-6T/H 940 7.62 4.40 1.50 37000 78
HC/ATEX-100-6T/L 910 5.89 3.40 1.10 29000 76

Dimensions in mm

HC/ATEX 25...63 HC/ATEX 71...100

Ex-d Ex-e

Model A B C D E G H J K Model A B C D E G H J
HC-25 330 275 262 260 236.5 11 56 8.5 310 HC-71-4T/H 850 810 715 711 395 20 170 14.5
HC-31-2 400 336 310.5 308 264.5 11 65 10.5 380 HC-71-6T/H 850 810 715 711 395 20 170 14.5
HC-31-4 400 336 310.5 308 245.5 11 65 10.5 380 HC-80-4T/H 970 910 801 797 488 20 210 14.5
HC-35-2 465 390 362.5 360 275.5 11 76 10.5 450 HC-80-4T/L 970 910 801 797 458 20 210 14.5
HC-35-4 465 390 362.5 360 256.5 11 76 10.5 450 HC-80-6T/H 970 910 801 797 458 20 210 14.5
HC-40-4.../H 532 452 412.5 410 297.5 11 97.5 10.5 500 HC-80-6T/L 970 910 801 797 416 20 210 14.5
HC-40-4.../L 532 452 412.5 410 278.5 11 97.5 10.5 500 HC-90-4T/H 1170 1110 918 914 511 20 210 14.5
HC-40-6.../H 532 452 412.5 410 308.5 11 97.5 10.5 500 HC-90-4T/L 1170 1110 918 914 488 20 210 14.5
HC-45-4.../H 596 504 462.5 460 315.5 11 105 10.5 560 HC-90-6T/H 1170 1110 918 914 488 20 210 14.5
HC-45-4.../L 596 504 462.5 460 304.5 11 105 10.5 560 HC-90-6T/L 1170 1110 918 914 455 20 210 14.5
HC-45-6.../H 596 504 462.5 460 315.5 11 105 10.5 560 HC-100-4T/H 1170 1110 1003 999 548 20 220 14.5
HC-50-4T/H 665 562 516.5 514 325.5 11 115 10.5 640 HC-100-4T/L 1170 1110 1003 999 521 20 220 14.5
HC-50-4.../L 665 562 516.5 514 283.5 11 115 10.5 640 HC-100-6T/H 1170 1110 1003 999 498 20 220 14.5
HC-50-6.../H 665 562 516.5 514 351 11 115 10.5 640 HC-100-6T/L 1170 1110 1003 999 468 20 220 14.5
HC-56-4T/H 710 630 563 560 374 15 115 10.5 721 The measures correspond to the Ex “e” version

HC-56-4T/L 710 630 563 560 325.5 15 115 10.5 721

HC-56-6.../H 710 630 563 560 351 15 115 10.5 721
HC-63-4T/H 800 710 638 635 399 15 140 10.5 820
HC-63-4.../L 800 710 638 635 376 15 140 10.5 820
HC-63-6.../H 800 710 638 635 376 15 140 10.5 820
The measures correspond to the Ex “e” version

135
 HC/ATEX

Acoustic features
The specified values are determined according to free field measurements of pressure and sound levels in dB(A) at an equivalent distance of
twice the fan’s span plus the impeller’s diameter, with a minimum of 1.5 m.

Sound power Lw(A) spectrum in dB(A) via frequency band in Hz.

Model 63 125 250 500 1000 2000 4000 8000 Model 63 125 250 500 1000 2000 4000 8000
25-2/H 38 48 65 65 73 69 62 53 56-4/L 43 58 68 73 79 80 76 69
25-4/H 25 35 52 52 60 56 49 40 63-4/H 43 60 73 80 85 86 81 74
31-2/H 46 56 73 73 81 77 70 61 63-6/H 33 50 63 70 75 76 71 64
31-4/H 28 38 55 55 63 59 52 43 63-4/L 48 63 73 78 84 85 81 74
31-4/L 26 36 53 53 61 57 50 41 71-4/H 47 64 77 84 89 90 85 78
35-2/H 50 60 77 77 85 81 74 65 71-6T/H 35 52 65 72 77 78 73 66
35-4/H 32 42 59 59 67 63 56 47 80-4/H 60 81 88 93 96 92 85 74
35-4/L 30 40 57 57 65 61 54 45 80-6/H 49 70 77 82 85 81 74 63
40-4/H 28 45 57 65 70 70 66 59 80-4/L 57 78 85 90 93 89 82 71
40-4/L 29 45 55 59 66 66 62 55 80-6/L 48 69 76 81 84 80 73 62
40-6/H 20 37 49 57 62 62 58 51 90-4/H 64 85 92 97 100 96 89 78
45-4/H 33 50 63 70 75 76 71 64 90-6/H 54 75 82 87 90 86 79 68
45-4/L 36 51 61 66 72 73 69 62 90-4/L 61 82 89 94 97 93 86 75
45-6/H 24 41 54 61 66 67 62 55 90-6/L 51 72 79 84 87 83 76 85
50-4/H 36 53 66 73 78 79 74 67 100-4/H 68 88 96 101 103 100 93 82
50-4/L 39 54 64 69 75 76 72 65 100-6/H 58 78 86 91 93 90 83 72
50-6/H 26 43 56 63 68 69 64 57 100-4/L 64 84 92 97 99 96 89 78
56-4/H 39 56 69 76 81 82 77 70 100-6/L 56 76 84 89 91 88 81 70
56-6/H 28 45 58 65 70 71 66 59

Characteristic curves
Q = Airflow in m3/h, m3/s and cfm. Pe= Static pressure in mmH2O, Pa and inwg.

136
 HC/ATEX

Characteristic curves
Q = Airflow in m3/h, m3/s and cfm. Pe= Static pressure in mmH2O, Pa and inwg.

137
 HC/ATEX

Characteristic curves
Q = Airflow in m3/h, m3/s and cfm. Pe= Static pressure in mmH2O, Pa and inwg.

138
 HC/ATEX

Characteristic curves
Q = Airflow in m3/h, m3/s and cfm. Pe= Static pressure in mmH2O, Pa and inwg.

Accessories
See accessories section.

INT AR VSD3/A-RFT CUADROS P R RI S INT-ATEX

VSD1/A-RFM

139