Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    GMP 1 0

    Uploaded by

    rasool
    This document describes tachogenerators with shafts ranging from 12 to 14 mm in diameter that have their own bearings. Key features include high response speeds, open circuit voltages from 40 to 175 mV per revolution, and top signal quality over the entire rotational speed range. Accessories include carbon brushes and spring disk couplings for connecting to shafts from 11 to 22 mm in diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GMP 1 0

    Uploaded by

    rasool
    24 views4 pages
    This document describes tachogenerators with shafts ranging from 12 to 14 mm in diameter that have their own bearings. Key features include high response speeds, open circuit voltages from 40 to 175 mV per revolution, and top signal quality over the entire rotational speed range. Accessories include carbon brushes and spring disk couplings for connecting to shafts from 11 to 22 mm in diameter.

    Original Title

    gmp-1-0

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes tachogenerators with shafts ranging from 12 to 14 mm in diameter that have their own bearings. Key features include high response speeds, open circuit voltages from 40 to 175 mV per revolution, and top signal quality over the entire rotational speed range. Accessories include carbon brushes and spring disk couplings for connecting to shafts from 11 to 22 mm in diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views4 pages

    GMP 1 0

    Uploaded by

    rasool
    This document describes tachogenerators with shafts ranging from 12 to 14 mm in diameter that have their own bearings. Key features include high response speeds, open circuit voltages from 40 to 175 mV per revolution, and top signal quality over the entire rotational speed range. Accessories include carbon brushes and spring disk couplings for connecting to shafts from 11 to 22 mm in diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Tachogenerators

    Shaft ø12 to ø14 mm with flange


    With own bearings

    GMP 1,0

    Features
    –– High response speed
    –– Open circuit voltage 40...175 mV per rpm
    –– Shaft ø12‑14 mm
    –– Top signal quality over the total rotational speed
    range by patented Longlife technique
    –– With own bearings
    –– Recognition of sense of rotation

    Optional
    –– Two separate tacho voltages (GMPZ 1,0)
    –– Second shaft end
    GMP 1,0

    Technical data - electrical ratings Technical data - mechanical design


    Reversal tolerance ≤0.1 % Housing ø110 mm
    Linearity tolerance ≤0.5 % Shaft ø12...14 mm
    Temperature coefficient ±0.05 %/K (idle) Protection DIN EN 60529 IP 55
    Isolation class B Admitted shaft load ≤80 N axial
    Calibration tolerance ±3 % ≤100 N radial
    Climatic test Humid heat, constant Materials Housing: aluminium die-cast
    (IEC 60068-2-3, Ca) alloy
    Shaft: stainless steel
    Performance 30 W (speed >3000 rpm)
    Operating temperature -30...+130 °C
    Armature-circuit time- <0.55 µs
    constant Resistance DIN EN 60068-2-6
    Vibration 10 g, 10-2000 Hz
    Open-circuit voltage 40...175 mV per rpm DIN EN 60068-2-27
    Shock 100 g, 6 ms
    Weight approx. 4.5 kg
    Connection Terminal box

    Subject to modification in technic and design. Errors and omissions excepted.


    Torque 2 Ncm
    Rotor moment of inertia 4.5 kgcm² 30/7/2010

    1 www.baumer.com/motion
    Tachogenerators
    Shaft ø12 to ø14 mm with flange
    With own bearings

    GMP 1,0

    Part number

    GMP 1,0 LT -

    Open-circuit voltage
    10 40 mV per rpm
    7 65 mV per rpm
    4 100 mV per rpm
    1 175 mV per rpm

    Data according to type

    Off-load Minimum load required depending Maximum Armature Armature


    Type
    voltage on speed range [rpm] operating speed resistance inductance

    0 - 1,000 0 - 3,000 0 - nmax


    U0 RL RL RL nmax R A (20°C) LA
    [mV/rpm] [kΩ] [kΩ] [kΩ] [rpm] [Ω] [mH]
    GMP 1,0 LT - 10 40 ≥ 0.15 ≥ 0.5 ≥2 6,000 12 90
    GMP 1,0 LT - 7 65 ≥ 0.4 ≥ 1.3 ≥5 6,000 33 225
    GMP 1,0 LT - 4 100 ≥1 ≥3 ≥ 12 6,000 81 550
    GMP 1,0 LT - 1 175 ≥3 ≥ 10 ≥ 12 3,400 275 1,650

    Superimposed ripple (for τRC = 1 ms): ≤ 1.0 % (peak-peak) ≤ 0.5 % (rms)

    Replacement switching diagram

    U(n)

    RA LA A1 R

    Subject to modification in technic and design. Errors and omissions excepted.


    U0(n) U(n) RL C -n n

    TACHO A2

    -U(n)

    LA RL
    τRC ≈ R · C τA ≈ U(n) = U0(n) ≈ U0(n) for R > RL >> R A
    RL R A + RL

    Polarity for positive direction of rotation: A1: + A2: - (VDE)


    30/7/2010

    2 www.baumer.com/motion
    Tachogenerators
    Shaft ø12 to ø14 mm with flange
    With own bearings

    GMP 1,0

    Terminal assignment Accessories


    View A - Connecting terminal Carbon brushes
    Polarity for positive direction of rotation
    Mounting accessories
    K 50 Spring disk coupling
    for shaft ø11...16 mm

    + K 60 Spring disk coupling


    for shaft ø11...22 mm

    A1 A2 -
    HK 2310

    Subject to modification in technic and design. Errors and omissions excepted.

    Dimensions
    positive direction of rotation

    HM97M24582
    30/7/2010

    3 www.baumer.com/motion
    Tachogenerators
    Shaft ø12 to ø14 mm with flange
    With own bearings

    GMP 1,0

    Subject to modification in technic and design. Errors and omissions excepted.


    30/7/2010

    4 www.baumer.com/motion

    You might also like