Scribd Logo
Upload

Welcome to Scribd!

  • 52 views

    Brake Control Wiring Kit P/N 85060: Lnstallation Lnstructions Lnstrucciones de Instalación Directives de Montage

    Uploaded by

    James Deffinbaugh
    The document provides instructions for installing a brake control wiring kit, including connecting wires from the kit to the vehicle's stoplight switch, battery, ground, and brake lines. It warns to disconnect the negative battery cable before installation and ensure proper grounding to avoid intermittent braking issues. Circuit overloading risks are outlined and testing the installation with a test light before use is advised.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Brake Control Wiring Kit P/N 85060: Lnstallation Lnstructions Lnstrucciones de Instalación Directives de Montage

    Uploaded by

    James Deffinbaugh
    52 views1 page
    The document provides instructions for installing a brake control wiring kit, including connecting wires from the kit to the vehicle's stoplight switch, battery, ground, and brake lines. It warns to disconnect the negative battery cable before installation and ensure proper grounding to avoid intermittent braking issues. Circuit overloading risks are outlined and testing the installation with a test light before use is advised.

    Original Title

    N85060

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing a brake control wiring kit, including connecting wires from the kit to the vehicle's stoplight switch, battery, ground, and brake lines. It warns to disconnect the negative battery cable before installation and ensure proper grounding to avoid intermittent braking issues. Circuit overloading risks are outlined and testing the installation with a test light before use is advised.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    52 views1 page

    Brake Control Wiring Kit P/N 85060: Lnstallation Lnstructions Lnstrucciones de Instalación Directives de Montage

    Uploaded by

    James Deffinbaugh
    The document provides instructions for installing a brake control wiring kit, including connecting wires from the kit to the vehicle's stoplight switch, battery, ground, and brake lines. It warns to disconnect the negative battery cable before installation and ensure proper grounding to avoid intermittent braking issues. Circuit overloading risks are outlined and testing the installation with a test light before use is advised.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    READ THIS FIRST: lnstallation lnstructions 85060IN Rev.

    A 12/09
    Read and follow all instructions
    carefully before beginning installation. lnstrucciones de instalación
    LISEZ CECI EN PREMIER: Directives de montage
    Lire et suivre toutes les instructions
    attenrivement avant le montage.
    LEA ESTO PRIMERO: Brake Control Wiring Kit
    Lea y siga todas las instrucciones
    cuidadosa-mente antes de iniciar la
    P/N 85060
    instalación.
    Trailer Connector

    12V Battery

    3
    20 Amp in-line Fuse Brake Control
    2

    1
    Wire-tap
    (supplied)

    Butt connectors
    (Supplied)
    Stoplight Switch- Connect to cold side
    (Voltage only when pedal is pushed)

    WIRE WIRE
    FUNCTIONS OF WIRES IMPORTANT: Wire colors shown are common
    NUMBER COLOR
    to most brake control unit. Read and follow
    1 Cold side of stoplight switch Red
    installation instructions supplied with Brake
    2 Battery (+) Black Control Unit before wiring.
    3 Ground (-) White
    4 Brake Blue

    1. Disconnect negative (-) cable before wiring Brake Control Unit. Use Ring Terminals for battery connections
    (provided).
    IMPORTANT: Read and follow all warnings and cautions on tow vehicle battery.

    2. Connect wires accordingly to the wiring diagram. Use butt connectors and wire tap provided.
    CAUTION: The WHITE(-) wire MUST be connected to a known ground or to a suitable ground location
    ( negative battery terminal). Inadequate grounding may cause intermittent braking or lack of sufficient voltage to trailer
    brakes.
    NOTE: When passing wire through sheet metal, always go through an existing grommet. Add a grommet or use
    silicone rubber to insulate the wire from the hole.

    WARNING
    All connections must be complete to function properly. Test and verify installation with a test light, circuit tester or trailer
    once installed.

    WARNING
    Overloading circuit can cause fires. DO NOT exceed lower of towing manufacturer rating or:
     Max. Right Turn, Left Turn, Stop, & Tail Light Circuits: (7.5 amps)
    Max. (+) Battery, Reverse, and Electric Brake Circuits: (30 amps) Read vehicle's owners manual & instruction
    sheet for additional information. Additional fusing may be required.

    @ 2009 Cequent Consumer Products,Inc.


    http://www.cequent-cpi.com
    Help hotline: 1-800234-6992

    You might also like