Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Energy Savers AC

    Uploaded by

    riteshrishabh
    The document discusses air conditioner energy savers, which are dual-sensor devices that optimize compressor run time and save electricity by continuously measuring room temperature, coil temperature, and ambient conditions. By using algorithms, they maintain precise temperature set points while minimizing run time. Case studies found savings of 28% on a 1.5 ton split AC and overall savings of up to 35% are estimated, with payback periods of 4-6 months. The energy savers can be used on most packaged and split ACs up to 20 tons and help convert 2-star ACs to 4-star efficiency.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Energy Savers AC

    Uploaded by

    riteshrishabh
    16 views6 pages
    The document discusses air conditioner energy savers, which are dual-sensor devices that optimize compressor run time and save electricity by continuously measuring room temperature, coil temperature, and ambient conditions. By using algorithms, they maintain precise temperature set points while minimizing run time. Case studies found savings of 28% on a 1.5 ton split AC and overall savings of up to 35% are estimated, with payback periods of 4-6 months. The energy savers can be used on most packaged and split ACs up to 20 tons and help convert 2-star ACs to 4-star efficiency.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses air conditioner energy savers, which are dual-sensor devices that optimize compressor run time and save electricity by continuously measuring room temperature, coil temperature, and ambient conditions. By using algorithms, they maintain precise temperature set points while minimizing run time. Case studies found savings of 28% on a 1.5 ton split AC and overall savings of up to 35% are estimated, with payback periods of 4-6 months. The energy savers can be used on most packaged and split ACs up to 20 tons and help convert 2-star ACs to 4-star efficiency.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views6 pages

    Energy Savers AC

    Uploaded by

    riteshrishabh
    The document discusses air conditioner energy savers, which are dual-sensor devices that optimize compressor run time and save electricity by continuously measuring room temperature, coil temperature, and ambient conditions. By using algorithms, they maintain precise temperature set points while minimizing run time. Case studies found savings of 28% on a 1.5 ton split AC and overall savings of up to 35% are estimated, with payback periods of 4-6 months. The energy savers can be used on most packaged and split ACs up to 20 tons and help convert 2-star ACs to 4-star efficiency.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Technical Bulletin No 5 - Energy Savers

    For Air Conditioners

    22nd May 2020

    Air conditioning is one of the highest energy consumers in the


    residential and industrial sectors. Many advancements in refrigeration
    & air conditioning took place in the past few years giving birth to high
    Energy Efficiency Ratio (EER) ACs but still the Air conditioner is not
    customized for each climate zone separately. Hence a common setting
    for the hottest climate zone is getting employed in all the Air
    Conditioners.
    Since air conditioners are not designed for different climatic zones. When the set tempe rature is
    achieved, the compressor continues to run for an additional fixed period say 6-8 minutes known as
    the overcooling period which is required only for few hours in a day in peak summer but it is over-
    utilized because of the balance of time. This is the area where closed-loop algorithm-based
    technology comes in to picture, where the compressor run cycle is optimized as per the geographical
    climatic conditions with the help of dual sensors.

    1 - AC Energy Savers

    How it Works...

    • AC energy savers are simple dual-sensor based closed-loop microprocessor controlled units.
    • It equipped with a room temperature sensor and cooling coil temperature sensor through which
    the feedbacks were collected. This enables the energy saver to adapt to change in the ambient
    conditions automatically & saves electricity.

    • It continuously measures room, Coil, and ambient temperature and by using multiple algorithms,
    maintains a precise set temperature while optimizing the compressor run time to save
    electricity.

    There is a provision for programming different settings like required set temperature, cooling coil
    temperature, and compressor off delay timing. This is a compact device wherein the integration with the
    existing ACs is simple.

    Suitability

    2 - Works with most types of AC's

    • These devices can be employed to different types of AC’s like packaged, split, centralized ACs
    up to 20TR.

    • This doesn't work with VRV air conditioner systems.

    • It is observed that the energy savings potential will be much effective for those air
    conditioning units which are operating for long-running hours than the intermittent operating
    ones. (Particularly the ACs used in the industries like drive panel room, laboratory, etc)
    Benefits

    • Detects ambient temperature and automatically maintains the precise set temperature
    irrespective of ambient seasonal changes
    • Can be connected to existing AC

    • Optimize the compressor run-time thereby saves electricity

    • Converts 2 star to 4 star AC

    • Extend the compressor life

    • A simple device with a remote and electronic display

    Saving Potential

    • As per the supplier, the energy saver cuts your electricity bill up to 35 % with a payback of 4-6
    months. But it depends on the type of air conditioner, set temperature,etc.,
    Case study 1 (TATA Communication Ltd)

    Installed on a 1.5 Ton split AC which was running almost 24 hrs/day. Power consumption without energy
    saver was found as 32.5 kWh and with energy saver was found to be 23.3 kWh. There was no variation
    observed in room temperature in both cases. Nearly 28 % energy savings with energy saver was
    observed at an attractive payback period of less than 4 months.

    Case study - 2

    3 - Savings achieved at different locations

    Sources
    • Airtron Energy saver - http://www.magnatron.in/air-conditioning-energy-saver/
    • Airco Savers - http://www.airco-saver.com/

    Please contact for more info


    N Muthusezhiyen

    Principal Counsellor | Confederation of Indian Industry (CII) CII-Sohrabji Godrej Green Business Centre
    Survey No -64, Kothaguda Post, Near Hitec City, Hyderabad-500084

    E Mail: [email protected]

    Web: www.greenco.in

    Arun Victor Paulraj

    Counsellor | Confederation of Indian Industry (CII) CII-Sohrabji Godrej Green Business Centre Survey No
    -64, Kothaguda Post, Near Hitec City, Hyderabad-500084

    M: 9177577400

    E Mail: [email protected]

    Web: www.greenco.in

    You might also like