Scribd
Upload
64 views2 pages

Tamb-Si E

The Tamb-Si is an ambient temperature sensor designed to work with the Si-RS485TC-2T-v sensor. It has a Pt1000 temperature sensor housed in a stainless steel tube with IP67 protection. It connects easily to the Si-RS485TC-2T-v via a 3-pin socket. The sensor provides high accuracy for ambient or engineering room temperature monitoring and includes options for additional weather protection.

Uploaded by

Ramces Jay Aquino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views2 pages

Tamb-Si E

The Tamb-Si is an ambient temperature sensor designed to work with the Si-RS485TC-2T-v sensor. It has a Pt1000 temperature sensor housed in a stainless steel tube with IP67 protection. It connects easily to the Si-RS485TC-2T-v via a 3-pin socket. The sensor provides high accuracy for ambient or engineering room temperature monitoring and includes options for additional weather protection.

Uploaded by

Ramces Jay Aquino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tamb-Si

External Ambient Temperature Sensor for Si-RS485TC-2T-v

Short Description
Our ambient temperature sensor Tamb-Si as complement of the Si- sensor Si-RS485TC-2T-v comes equipped
with a stable INOX steel tube and a robust weatherproof cable. Thanks to the use of top quality components the
sensor achieves very high accuracy and is ideal for use in field environments (ambient temperature or
monitoring of engineering room).
Furthermore the measurement accuracy can be improoved with the optional weather protection (Shield Tamb-
Si).

Technical Data
Type Tamb-Si
Sensor Element Pt1000 1/3 Class B as per EN 60751
Sensor Housing INOX steel tube, 6 mm diameter, 50 mm length
Protection Level IP 67
Pin 1: Pt1000
Pin Assignment Pin 2: Pt1000
Pin 3: cable shield, isolated to INOX steel tube
Weight Approx. 110g
Operating Condition -40 bis +85°C
Sensor Cable Length: 3 m, PUR coated, shielded (LiYC11Y, 4 x 0.14 mm²)
Customs Tariff Number 90 25 19 00

Ingenieurbüro Mencke & Tegtmeyer GmbH ● Schwarzer Weg 43A ● 31789 Hameln ● Germany!
Tel. +49-5151-403699-0 ● Fax: +49-5151-403699-19 ● www.ib-mut.de ● [email protected]
Tamb-Si
External Ambient Temperature Sensor for Si-RS485TC-2T-v

Safety Instructions
The installation and assembly of electrical equipment must be carried out by electrically qualified persons.
The sensor may not be used with equipment whose direct or indirect purpose is to prevent human death or
injury, or whose operation poses a risk to humans, animals or property.

Electrical Connection
This sensor is designed for connecting to the Si- sensor type Si-RS485TC-2T-v. For connecting, remove the
protection cab of the 3-pole socket of the Si-RS485TC-2T-v and connect the Tamb-Si. To lock the cable connector,
the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 Ncm).

Installation Instructions
If mounted outdoors, avoid direct exposure to sunlight and rain to the sensor housing (INOX steel tube). If
necessary, provide protection from the sun and rain with the optional Shield Tamb-Si.
The sensor cable needs a cable grip close to the sensor housing.

Maintenance
The sensors should be checked once a year for damage, contamination and correct fitting.

User information
The sensor is designed for the measurement of air temperature. The warranty is for 1 year from the date of the
invoice for the intended use. M&T does not accept any liability for possible losses or damage due to the
incorrect usage of the sensor. Liability for consequential damages is excluded.

Optional Weather Protection Shield Tamb-Si

Page 2 of 2 Date: September 2021 Errors and changes excepted

You might also like