Scribd
Upload
84 views5 pages

How To Add IP Camera To The Indoor Station

1. The document provides instructions for adding an IP camera to an indoor station, including adding the door station to the iVMS-4200 software, configuring the indoor station's remote settings by inputting camera information like port 554 and channel 1, and ensuring the camera resolution is 1280x720 or less and uses H.264 encoding. 2. It notes the camera can be accessed through the NVR by filling in the channel number and disabling stream encryption. 3. Finally, users can view the live camera feed by selecting it in the live view menu.

Uploaded by

TEUKU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views5 pages

How To Add IP Camera To The Indoor Station

1. The document provides instructions for adding an IP camera to an indoor station, including adding the door station to the iVMS-4200 software, configuring the indoor station's remote settings by inputting camera information like port 554 and channel 1, and ensuring the camera resolution is 1280x720 or less and uses H.264 encoding. 2. It notes the camera can be accessed through the NVR by filling in the channel number and disabling stream encryption. 3. Finally, users can view the live camera feed by selecting it in the live view menu.

Uploaded by

TEUKU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

0

Title: How to add IP camera to the indoor station Version: v1.0 Date: 2020/11/24
Product: Video Intercom Page: 1 of 3

to add IP camera to the indoor station

1. Add Devices on iVMS-4200


1) Search for online devices and add the door station on iVMS-4200, enter username
and password, and then confirm that the device is online.

1
Title: How to add IP camera to the indoor station Version: v1.0 Date: 2020/11/24
Product: Video Intercom Page: 2 of 3

2.
1) Choose the Indoor Station Remote Configuration, then go to Intercom IP
Camera Information Port as
554, Channel No as 1. Set Manufacturer Protocol as HIK Protocol. Input user
name, password and save.

2
Title: How to add IP camera to the indoor station Version: v1.0 Date: 2020/11/24
Product: Video Intercom Page: 3 of 3

Note: The resolution of the IP camera should less than or equal to 1280*720 resolutions, the
decoding type should be H.264.

Note: You can access NVR channel by filling the corresponding channel number in Channel NO
and disable the Stream Encryption function due to the video intercom architecture
it.

3.
1) Choose Live View Network Camera IPC then you can watch the live view.

3
0

You might also like