Product data sheet

MICS3-CBUZ40IZ1P01
outdoorScan3

SAFETY LASER SCANNERS

 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

A Ordering information

Type Part no.

B MICS3-CBUZ40IZ1P01 1094472

C The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.

Other models and accessories www.sick.com/outdoorScan3

D
E Illustration may differ

Detailed technical data

H Features

I
Model Sensor including system plug (pre-mounted on the underside)

Application Outdoor 1)
Compressed air cleaning Not possible

J Protective field range 4 m

Warning field range 40 m

K Number of simultaneously monitored fields

Number of fields
≤ 8 2)
128

L Number of monitoring cases

Scanning angle
128

275°

M
Resolution (can be configured) 50 mm
70 mm
Angular resolution 0.39°

N Response time
Protective field supplement
≥ 115 ms

65 mm

O 1)
2)
 The safety laser scanner is suitable for use in industrial environments (indoors and outdoors).
 Protection or warning fields.

Safety-related parameters
P Type Type 3 (IEC 61496)

Q
Safety integrity level SIL2 (IEC 61508)

Category Category 3 (EN ISO 13849)

Performance level PL d (EN ISO 13849)

R Performance class SRS/SRSS

PFHD (mean probability of a dangerous fail-
Performance class D (IEC/TS 62998)

8.0 x 10-8 (EN ISO 13849)

S
ure per hour)

T 2 SAFETY LASER SCANNERS | SICK Product data sheet | 2023-01-19 17:12:36

Subject to change without notice
 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

TM (mission time) 20 years (EN ISO 13849)

Safe state in the event of a fault The safety outputs via the network are logic 0.

Functions
Restart interlock ✔

Multiple sampling ✔

Monitoring case switching ✔

Simultaneous monitoring ✔

Static protective field switching ✔

Integrated configuration memory ✔

Measured data output Via Ethernet

Interfaces
Connection type
Voltage supply 1 x male connector, M12, 4-pin, A-coded
Fieldbus, industrial network 2 x M12 female connectors, 4-pin, D-coded
Outputs
OSSD pairs 0
Safety outputs via network 8
Configuration method PC with Safety Designer (Configuration and Diagnostic Software)

Configuration and diagnostics interface USB 2.0, Mini-USB, Ethernet

Fieldbus, industrial network EtherNet/IP™

Protocol CIP Safety™
Device properties Common Industrial Protocol: The CIP Networks Library Volume 1, Edition 3.20
EtherNet/IPTM: The CIP Networks Library Volume 2, Edition 1.26
CIP SafetyTM: The CIP Networks Library Volume 5, Edition 2.13
Topology support DLR (Device Level Ring)
Display elements Graphic color display, LEDs

Electrical data
Protection class III (EN 61140)

Supply voltage Vs 24 V DC (16.8 V DC ... 30 V DC)

Power consumption 7 W (without output load)

Mechanical data
Dimensions (W x H x D) 114.6 mm x 150.7 mm x 114.6 mm (without system plug)

Weight 1.45 kg

Housing material Aluminum

Housing color RAL 2004 (pure orange), RAL 9005 (black)

Optics cover material Polycarbonate

Optics cover surface finish Outside with scratch-resistant coating

Ambient data
Enclosure rating IP65 (IEC 60529)

Ambient light immunity

1)
 More detailed data can be found in the operating instructions, chapter "Project planning".

2023-01-19 17:12:36 | Product data sheet SAFETY LASER SCANNERS | SICK 3


Subject to change without notice
 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

A Halogen light ≤ 12,000 lx (IEC 61496-3)

Sunlight ≤ 40,000 lx (IEC 61496-3)

B
Ambient operating temperature –25 °C ... +50 °C

Storage temperature –25 °C ... +70 °C

Ambient conditions

C Rain 10 mm/h 1)

Snowfall 3 mm/h SWE, Snow Water Equivalent 1)

D Vibration resistance
Fog ≥ 50 m (MOR, Meteorological Optical Range) 1)

IEC 60068-2-6, IEC 60068-2-64, IEC 60721-3-5, IEC TR 60721-4-3, IEC 61496-1,

E
IEC 61496-3
Class 5M1 (IEC 60721-3-5)
3M4 (IEC TR 60721-4-3)

F Shock resistance IEC 60068-2-27, IEC 60721-3-5, IEC TR 60721-4-3, IEC 61496-1, IEC 61496-3

Class 5M1 (IEC 60721-3-5)
3M4 (IEC TR 60721-4-3)
Continuous shock 100 m/s², 16 ms
150 m/s², 6 ms
EMC IEC 61496-1

H IEC 61000-6-2
IEC 61000-6-4

I
1)
 More detailed data can be found in the operating instructions, chapter "Project planning".

Other information

J
Type of light Pulsed laser diode

Wave length 845 nm

Detectable remission 1.8% to several 1000%

K Laser class 1M (21 CFR 1040.10 and 1040.11, IEC 60825-1)

Classifications
L eCl@ss 5.0 27272705

eCl@ss 5.1.4 27272705

M eCl@ss 6.0
eCl@ss 6.2
27272705

27272705

N eCl@ss 7.0
eCl@ss 8.0
27272705

27272705

O
eCl@ss 8.1 27272705

eCl@ss 9.0 27272705

eCl@ss 10.0 27272705

P eCl@ss 11.0
eCl@ss 12.0
27272705

27272705

Q ETIM 5.0
ETIM 6.0
EC002550

EC002550

R
ETIM 7.0 EC002550

ETIM 8.0 EC002550

UNSPSC 16.0901 39121528

S
T 4 SAFETY LASER SCANNERS | SICK Product data sheet | 2023-01-19 17:12:36
Subject to change without notice
 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

Dimensional drawing (Dimensions in mm (inch))

114,6
Ø 99,5 a
1
2

22 36,1 40,1
1,3 3
47,1
150,7

173,6

c
63,5

52,5
M5×7,5
44 85
112 12
134,2
114,6

①  Mirror axis of rotation

②  Scan plane
③  Required viewing slit (a: length of the viewing slit, b: minimum height above the scan plane, c: minimum height below the scan plane. See the
operating instructions for details.)

Pin assignment
Voltage supply

2 1

3 4

Pin Designation Description

1 +24 V DC Supply voltage +24 V DC
2 NC Not connected
3 0 V DC Supply voltage 0 V DC
4 FE Functional earth/shielding
For details see operating instructions

Ethernet

1 2

4 3
Pin Designation Description
1 TX+ Send data +
2 RX+ Receive data +
3 TX- Send data -
4 RX- Receive data -
Thread SH Shielding
For details see operating instructions

2023-01-19 17:12:36 | Product data sheet SAFETY LASER SCANNERS | SICK 5


Subject to change without notice
 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

A
B
Recommended accessories
Other models and accessories www.sick.com/outdoorScan3

Brief description Type Part no.

C Device protection (mechanical)

1 piece, Splash guard, only in conjunction with mounting kit 3 (2103049) Splash guard 2123205

D
1 piece, weather hood (only in conjunction with mounting kit 3) Weather hood 2103050

E
Mounting brackets and plates

F 1 piece, mounting bracket, Stainless steel V2A (1.4301), powder-coated IGP-DURA

face 5803A
Mounting kit 1a 2073851

1 piece, mounting bracket with protection of optics hood, Stainless steel V2A Mounting kit 1b 2074242
(1.4301), powder-coated IGP-DURA face 5803A

H 1 piece, alignment bracket, alignment with cross-wise axis and depth axis possible,
distance between mounting surface and device: 22.3 mm, only in conjunction with
Mounting kit 2a 2073852

mounting kit 1a (2073851) or 1b (2074242), Stainless steel V2A (1.4301), pow-

I der-coated IGP-DURA face 5803A

1 piece, Alignment bracket, alignment with cross-wise axis and depth axis possible, Mounting kit 2b 2074184
distance between mounting surface and device: 52.3 mm, only in conjunction with

J mounting kit 1a (2073851) or 1b (2074242), Stainless steel V2A (1.4301), pow-

der-coated IGP-DURA face 5803A
1 piece, Alignment bracket with protection for the optics cover, alignment with cross- Mounting kit 3 2103049

K
wise axis and depth axis possible

Other mounting accessories

L For loosening and tightening M12 plug connectors to the system plug with defined
torque (0,4 Nm)
Torque screwdriver
with attachment for
2081618

M12 plug connector

M Plug connectors and cables

Head A: female connector, M12, 4-pin, angled, A-coded YG2A64-020UE1XLEAX 2108122

N
Head B: Flying leads
Cable: Sensor/actuator cable, PUR, halogen-free, shielded, 2 m
Head A: female connector, M12, 4-pin, angled, A-coded YG2A64-100UE1XLEAX 2108123

O
Head B: Flying leads
Cable: Sensor/actuator cable, PUR, halogen-free, shielded, 10 m
Head A: male connector, M12, 4-pin, angled, D-coded YN2D34-020PN4MRJA4 2108116
Head B: male connector, RJ45, 4-pin, straight

P Cable: Fieldbus, PUR, shielded, 2 m

Head A: male connector, M12, 4-pin, angled, D-coded YN2D34-100PN4MRJA4 2108141
Head B: male connector, RJ45, 4-pin, straight

Q Cable: Ethernet, PUR, shielded, 10 m

AGV Dynamic Weather Assist

R
• Product type: Software SOW/DWA-FX00402010 1615375
• Items supplied: Software (Safety Designer project file with functional logic) as well
as operating instructions

S
T 6 SAFETY LASER SCANNERS | SICK Product data sheet | 2023-01-19 17:12:36
Subject to change without notice
 MICS3-CBUZ40IZ1P01 | outdoorScan3
SAFETY LASER SCANNERS

Brief description Type Part no.

Digital Services for Integration

• Application: Condition monitoring Monitoring Box out- 1614150
• Description: The Monitoring Box Basic is a scalable digital service for monitoring doorScan3 Basic
service and process data. The outdoorScan3 is used to monitor object detections
and the health status of the sensor. This provides an effective means of reducing
downtimes.
• Hosting: Off-premise: smartservice.sick.com, On-premise: Industrial PC or virtual
machine on the user's servers
• Type: App
• Contract type: SaaS
• Contract interval: Annual
• Supported products: outdoorScan3
• Vital data: Device status, operating hours, Error code, contamination, device tem-
perature
• Version: Release 1

Safety Laser Scanner Visualization

• Description: Single-place license SOW/VTL-LI007PCWI0 1116788
• Supported products: All microScan3 variants (except for microScan3 Core I/O vari-
ants), outdoorScan3 Pro – EtherNet/IP™
• Operating system: Windows XP and higher, The software can also be started via a
Windows-based virtual machine.

2023-01-19 17:12:36 | Product data sheet SAFETY LASER SCANNERS | SICK 7


Subject to change without notice
 SICK at a glance
Online data sheet

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-
tions. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-
ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the ma-
chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

Worldwide presence:
Contacts and other locations – www.sick.com

SICK AG | Waldkirch | Germany | www.sick.com