Scribd
Upload
48 views1 page

Installation Manual ROSA Switch

Uploaded by

samran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Installation Manual ROSA Switch

Uploaded by

samran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Installation Manual STx Switch

EAE KNX Rosa Switch Series Rosa IM R1.0

Operation and Display Installation


Installation of the product is done with the help of the flange which is
inside the box. The flange is fixed to the junction box by using screws
while the arrows on flange are headed to up. The switch is placed into
the junction box by positioning the EAE logo upwards and then reclining
it to the flange. The switch is slowly turned clockwise to give the right
position to it on the flange. After the clicks are on the right position,
switch is turned counter-clockwise to lock it on the flange.

Locking Direction (CCW)

Locking Direction (CCW)

Description of the Device


Rosa premium push-button and thermostat series create a natural
harmony and adds value to your interior designs with elegant look and
sophisticated technology. Combined with KNX system, use of a single
Rosa switch would provide you the means to activating light scenes,
controlling blinds and setting a comfortable temperature. Rosa series Commissioning
which combine the familiar push button feeling with the latest Device default physical address is 15.15.255. Determination of the
technology are available in anthracite, ivory and cloud gray colours. physical address and setting of parameters are actualized with
Engineering Tool Software (ETS3/ETS4 or higher). “.knxprod” file must be
• 60x60 mm easy mounting to standard junction boxes. imported to the ETS. (http://www.eaetechnology.com/)
• 4 rockers can be programmed to perform different functions.
A detailed information about parameter configuration can be found
▪ Switching ▪ Value in Product Manual of device.
▪ Dimming ▪ Scene control Installation and commissioning of device may only be implemented
▪ Shutter/Blind ▪ Status notification by trained electricians. The relevant standards, directives, regulations
Technical Data and instructions must be observed when planning and implementing the
Type of protection IP 20 -EN 60 529
electrical installation.
Safety class II -EN 61 140 -When connecting the device make sure that the device can be isolated!
KNX Supply (1) - Voltage 21 V… 30 V DC SELV
- Current Consumption ≤ 10 mA -Protect the device against moisture, dirt and damage during transport,
Connections -KNX Bus connection terminal storage and operation!
Installation 60x60 mm standard box
Temperature range Ambient -5° C + 45° C -Do not operate the device out of the specified technical data which is
Storage -25° C + 55° C stated.
Humidity Max. air humidity 95 % no moisture
condensation -The device may only be operated in closed enclosures (Distribution
Dimensions Front face 85x85 mm boards)
Side- Surface 11 mm
Side- Under plaster 19,4 mm Cleaning
Weight 93 g If device becomes dirty, only a dry cloth can be used for cleaning. İt is not
Box Plastic, polycarbonate suitable to use wet cloths, caustics and solvents.
CE In accordance with the EMC guideline and low
voltage
Application Program Communication Objects -50
Number of Addresses(max) -254
Number of assignments(max) -255

© EAE Technology www.eaetechnology.com


Ikitelli Org.San.Bolg. Ziya Gokalp Mah. Eski Turgut Ozal Cad.
No: 20 34490 Basaksehir/Istanbul Tel: +90 212 549 97 13

You might also like