Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Panel Specification Clause 21

    Uploaded by

    Pottem Vanithareddy
    This document contains a technical specification template for a switchboard with sections for the bidder to fill in details of the switchboard components. The bidder is to specify information such as the make, ratings, and standards for items including air circuit breakers, current transformers, miniature circuit breakers, and indicating instruments that will be used to meet the requirements shown on the single line diagram for the switchboard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Panel Specification Clause 21

    Uploaded by

    Pottem Vanithareddy
    23 views2 pages
    This document contains a technical specification template for a switchboard with sections for the bidder to fill in details of the switchboard components. The bidder is to specify information such as the make, ratings, and standards for items including air circuit breakers, current transformers, miniature circuit breakers, and indicating instruments that will be used to meet the requirements shown on the single line diagram for the switchboard.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a technical specification template for a switchboard with sections for the bidder to fill in details of the switchboard components. The bidder is to specify information such as the make, ratings, and standards for items including air circuit breakers, current transformers, miniature circuit breakers, and indicating instruments that will be used to meet the requirements shown on the single line diagram for the switchboard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views2 pages

    Panel Specification Clause 21

    Uploaded by

    Pottem Vanithareddy
    This document contains a technical specification template for a switchboard with sections for the bidder to fill in details of the switchboard components. The bidder is to specify information such as the make, ratings, and standards for items including air circuit breakers, current transformers, miniature circuit breakers, and indicating instruments that will be used to meet the requirements shown on the single line diagram for the switchboard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MAXPRO SPEC. No.: NSK2/OSBL/43/034_Rev.

    4 PAGE 30 OF 31
    21.0 TECHNICAL PARTICULARS AND DATA TO BE FILLED BY BIDDER (DG PCCs):

    DESCRIPTION VENDOR TO FILL IN


    A GENERAL
    1 Make L&T / SCHNEIDER / SIEMENS
    2 Enclosure material GI sheet
    3 Type Single front, Modular,
    Compartmentalized, Draw out type
    4 Thickness of sheet metal 2 mm for load bearing members, 1.6
    mm for non-load bearing members & 3
    mm for Gland Plate
    5 Paint Shade Siemens Grey (RAL-7032)
    6 Cable entry
    6.1 Incoming Bottom
    6.2 Outgoing
    B BUSBARS
    1 Rated continuous current As shown on SLD
    2 Busbar material As shown on SLD
    3 Busbar size Vendor to indicate. Bus bar size shall
    be same, uniform through out the
    Switchboard
    4 Ground bus size Not less than 50 x 6 mm Aluminium
    5 Bus with insulating sleeves Yes
    6 Clearances Ph/Ph, Ph/n & Vendor to specify
    Ph/earth
    7 Short circuit current rating As shown on SLD
    8 Busbar support insulator make & Vendor to specify
    voltage class
    9 Final Temperature busbars 85 deg C
    C ACB/MCCB
    1 Make L&T / SIEMENS / SCHNEIDER
    2 Voltage, frequency & poles 415V, 50 Hz, 3Ph, 3P with bolted
    neutral
    3 Rated current As per SLD
    4 Short circuit withstand rating As shown on SLD
    5 Rated ultimate short circuit Vendor to specify
    current (Icu)
    6 Rated service short circuit current Vendor to specify
    (Ics)
    7 Rated short circuit making current Vendor to specify
    (Icm)
    8 Total interrupting time (ms) Vendor to specify
    9 Operating mechanism Manual, Quick Make & Quick Break
    10 Trip - free feature Required
    11 Provision for pad locking facility in Required

    12 No. of auxiliary contacts Vendor to specify


    D CURRENT TRANSFORMER
    MAXPRO SPEC. No.: NSK2/OSBL/43/034_Rev.4 PAGE 31 OF 31
    DESCRIPTION VENDOR TO FILL IN
    1 Make KAPPA / AE
    2 Type & services Epoxy cast resin
    3 Voltage & frequency 415V, 50Hz
    4 Ratio As required
    5 Rated VA burden As required
    6 Accuracy class As required
    7 Short circuit current rating As shown on SLD
    8 Class of Insulation Vendor to specify
    9 Terminals type Bolted, Fixed type
    E MINIATURE CIRCUIT BREAKER
    1 Make L&T / SIEMENS / INDO ASIAN
    2 Type Vendor to specify
    3 Rated voltage Vendor to specify
    4 Rated current As per SLD
    5 Category of duty Vendor to specify
    6 Rupturing capacity (Prospective
    Vendor to specify
    current)
    7 Maximum let through current for
    Vendor to specify
    1 second
    8 Time current characteristics Vendor to specify
    F INDICATING INSTRUMENTS
    1 Make L&T/Schneider-Conzerv / Rishabh /
    Siemens
    2 Size Min.96 mm x 96 mm
    3 Type Vendor to specify
    4 Range for Incoming & Outgoing Vendor to specify
    G WIRING
    1 Size 2.5 Sq.mm Copper Minimum for
    power, 2.5 Sq.mm copper for CT
    secondary and 1.5 Sq. mm for control
    circuits
    2 Insulation PVC
    3 Voltage class 600/1100 V

    You might also like