ECHO Series

Hand-Held Ultrasonic Thickness Gages

for Corrosion and Precision Applications

n Simple to Operate n Corrosion and Precision Modes

n Hand Held n Live A-scan
n Field Upgradeable Options n Made in the USA
A Totally New Platform of Ultrasonic Thickness Gages
Our new ECHO series represents a totally new platform of ultrasonic thickness gages combining
corrosion and precision gaging into one tough, small package... The perfect size of fit and function!
Hold the ECHO in your hand and you will agree no detail has been overlooked and the ergonomics
are unmatched by any thickness gage in the industry! The new ECHO series comes in 3 configurations;
ECHO 9, ECHO 8 and ECHO 7. ECHO 9 is our corrosion gage using dual transducers, ECHO 7 is our
precision gage with 1 micron resolution using single element transducers and ECHO 8 is the ultimate unit
combining both dual and single element transducers.

The new ECHO series can non-destructively The ECHO series has a remarkable sunlight
measure essentially any engineering material readable 3.5” color display, up to 32 Gb of micro
thickness. In its most popular configuration, the SD memory, built-in rechargeable high capacity Li
ECHO 9 series is an extremely capable, hand Ion battery all packaged in a custom case designed
held ultrasonic thickness gage for measuring for IP67 rating. Not sure which model to choose?
the wall thickness of primarily metal structures Don’t worry, the ECHO series is fully capable of
subject to corrosion. ECHO can easily be upgraded field upgrades directly from the keypad so you
to precision mode to utilize single element will never be stuck with an obsolete product
transducers. or experience any downtime. ECHO Series can
measure from .020” to 23” in steel in corrosion
mode or as thin as .006” in steel when configured
as a precision gage.

2 ECHO SERIES
ECHO Series Standard Features
• Compatible with a wide variety of Danatronics • Fast Min/Max mode to display actual thickness
and common competitor dual and single ele- and minimum and maximum at the same time
ment transducers • Gain, range, rectification, blank adjustments with
• Change color and VIBRATE on alarm (ideal for live waveform
inspections in loud environments) • Datalogger 2 Gb micro SD card standard expand-
• 27 Hour battery life with hi-capacity re-charge- able to 32 Gb
able battery pack via the USB port • Datalogger interfaces with Microsoft Excel
• Wide thickness range (.006” to 23” depending on • Designed for IP67
gage type, material and transducer)
• Made in the USA
• Inches, mm or µSec
• Simple one hand operation
• Multiple languages
• Field upgradeable software options
• Velocity mode

ECHO Series Standard Inclusions

Includes transducer (DKS537, dual 5.0 Mhz, .375”
with potted 3 foot cable for corrosion gages; for
precision gages, a probe up to 10 Mhz with a
Call with your
lemo to microdot cable are included), 2 Gb micro ID and payment
SD card, Li-ion battery, battery charger, transport to unlock any
case, manual with data XL, USB cable, echo-to- additonal features.
echo to ignore coatings. Our most advanced mod-
els include custom rubber boot.

ECHO Series Software Options

Software options are all field upgradeable with Live Waveform
many advantages:
Displays the live A-scan for echo verification and
• Options are activated via the keypad…no need to real time control of range, gain, rectification and
plug into a computer blanks.
• Only takes less than one minute
• No shipping cost Corrosion Mode
• No downtime Uses dual transducers to measure remaining wall
• Never worry about buying an obsolete unit thickness on primarily steel structures subject to
• Less initial outlay of capital corrosion.

Datalogger Angle Beam Software

(includes B-scan) internally store millions of Available on ECHO 8 and ECHO 9, displays trig
thickness readings with ID location and send functions of detected echo for angular distance,
readings to Micorsoft Excel via our Data XL surface and depth.
interface program. NOTE: Not meant to be a code compliant ultrasonic flaw
detector due to vertical linearity and display update rate.
Oxide Scale
Simultaneously displays the wall thickness of the
Precision Mode
boiler tube thickness as well as the internal oxide Allows for the use of single element transducers
scale at their independent velocities. Knowing the along with up to 2,700 stored application setups
thickness of the boiler tube can greatly improve with 1 micron resolution (.0001” or .001mm).
the efficiency and extended life of the tube.
www.danatronics.com 3
ECHO 9 Corrosion Thickness Gage
Our ECHO 9 is our premier corrosion thickness Standard Features
gage with a wide thickness range, able to be used
• Compatible with a wide variety of Danatronics
with a variety of dual transducers as well as a se-
dual and single element transducers
lection of single element and angle beam probes.
Similar to our precision thickness gages, ECHO 9 • Wide thickness range (.020” to 23” depending on
can save and store custom setups. gage type, material and transducer)
• Coating Thickness and substrate thickness
Typical Applications displayed simultaneously on gage with live
• Boiler tubes waveform
• Pressure vessels • High temperature probes available up to
• Storage tanks 950F/509C (intermittent use)

• Ship hulls • Temperature correction

• Pipes • File compare features shows old readings along

with new readings for datalogger versions
• Steel beams on bridges
(real-time corrosion monitor)
• Available angle beam option

ECHO 9 – Base model includes Echo to Echo ECHO 9W – Includes Waveform, Coating Thickness

ECHO 9DL – Includes Datalogger, B-scan, Temperature ECHO 9DLW – Includes Waveform, Datalogger, B-scan,
Correction Coating Thickness, Temperature Correction

4 ECHO SERIES
ECHO 7 Precison Thickness Gage
ECHO 7 hand-held ultrasonic thickness gages are Standard Features
designed for use with single element contact,
• .006-20” range in steel
delay line and immersion transducers to provide
the maximum thickness range and up to 1 micron • 1 micron resolution (0.0001” or 0.001 mm)
resolution. ECHO 7 can save up to 2,700 custom • single element, contact, delay line and immer-
applications setups allowing the operator to quick- sion transducers (1-25 MHz)
ly and easily switch transducers and setups on the
• Store and recall up to 2,700 setups
fly for unique and separate tasks.
• Multiple modes for challenging applications
• 30 Mhz bandwidth
• Squarewave Pulser
• Zoom Auto Tracking

Typical Applications
• Castings
• Turbine blades
• Plastic parts including bottles, pipes,
trays and toys
• Coil steel and automotive body
panels
• Fiberglass and gel coatings
• Velocity verification for ductile and
gray iron (Velocimeter)
• Aluminum, glass, ceramics, zinc and
more

www.danatronics.com 5
ECHO 8 Corrosion and Precision Thickness Gage
ECHO 8 represents our most capable ultrasonic Standard Features
thickness gage combining both dual and single
• Includes all features from the ECHO 7 and ECHO 9
element probes into one small instrument. Quickly
switch transducers and “gage type” to essentially • Switch from dual to single element transducers
non-destructively measure any engineered mate- • Switch resolution from .01” to .001” to .0001”
rial. The ECHO series can keep track of up to 2,700
• Store and recall up to 2,700 applications setups
stored setups, so switching from materials with
different thicknesses and alarm values is simple. • Rechargeable batteries good for more than 24 hr.
• ECHO 8DLW includes custom rubber boot with
Typical Applications stand
• Inspection Companies—all-purpose gage for
measuring any engineered material thickness
• Airplane Inspection (thin aluminum, plastic
windows, and rubber tires)
• Marine Surveyors (fiberglass & steel)

ECHO series in A and B-Scan with EZ Scan magnetic

wheel encoder
6 ECHO SERIES
Environmentally Tough, Ergonomically Superior!
Environmentally Tough!
The ECHO series was designed from the ground up. With more
than 85 combined years in designing, manufacturing and using
hand held ultrasonic thickness gages, Danatronics left no detail
uncovered. From its new case designed for IP67, to its easy to
read sunlight readable 3.5” color display, you will find the ECHO
series combines practical features with a simple, clean design
built for years of field service and durability.
Ergonomically Superior!
With its new 3.5” sunlight readable display, The ECHO series
offers many display formats to suit any age operator and
reduce fatigue. So whether you want to view the largest possible
numbers or would prefer more text on screen, ECHO has you
covered.
ECHO is also perfectly
balanced and makes
holding it in one hand
possible and simple…
no clumsy joy sticks
or second functions
needed. There is even a world’s first vibrate on alarm to
inform the operator any pre-set thickness threshold has been
tripped which is great for tired operators and testing in loud
environments.

Easy to hold and operate in one hand

Hardware Options
• Rubber boot with chest harness with built-in • Footswitch
finger strap and bail (stand) • Remote power bank
• Magnetic wheel encoder • Magnetic pipe stand

www.danatronics.com 7
Data XL and Data XL PRO
At Danatronics we believe managing your saved
data should be simple. As such, we include with
every thickness gage a free interface program we
call Data XL. Data XL saves readings to .csv files
that can be used in any spreadsheet program such
as Microsoft Excel or Google Sheets.
Here are some advantages:
• Write custom batch programs
• Simple double click the file to be transfer and
Microsoft Excel with all i.d.’s and readings are
displayed
• Create file and send them to the ECHO
• Merge files using Data XL
• Saved strored application seteups can be sent
to the ECHO or multiple ECHO units to ensure
reliability and repeatability
• Update firmware (latest version of operating
software is available on the support tab of
www.danatronics.com)
• Send Bit Maps (screen shots) to further document
your inspections

The optional Data XL Pro does all of the above plus allows the transfer of A-scan and B-scan for the
ultimate in computer software reporting.

8 ECHO SERIES
Danatronics Transducers
The ECHO series comes loaded with a default list So, if you are measuring, boiler tubes, pressure
of probes to solve a vast variety of applications for vessels, ship hulls, bridges, coil steel, aluminum,
any non-destructive testing wall thickness of most plastic bottles, toys, trays and anything in
engineering materials. between…we have the probe for you..

Dual Transducers
Standard Dual Transducers
ECHO Part Echo to Echo Range Temperature
Model No. Range in Steel in Steel Freq. Diameter Range Connector Type
8, 9 DK-250 0.100”-20” (2.5mm-508mm) 0.200”-2” (5.08mm-50.8mm) 2.25 MHz 0.500”/12.7mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-525 0.040”-20” (1mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.250”/6.35mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-537 0.040”-20” (1mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.375”/9.52mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DKS-537 0.040”-20” (1mm-508mm) 0.100”-0.750” 5.0 MHz 0.375”/9.52mm 32-100F/0-38C Right Angle Potted - Lemo 00
(2.54mm-19.05mm)
8, 9 DK-550 0.040”-20” (0.76mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.500”/12.7mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-718 0.030”-2” (0.76mm-50.8mm) 0.060”-1” (1.52mm-25.4mm) 7.5 MHz 0.187”/4.75mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-718LPM* 0.050”-2” (1.25mm-50.8mm) N/A 7.5 MHz 0.187”/4.75mm 32-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-1025 0.020”-2” (0.5mm-50.8mm) 0.060”-1” (1.52mm-25.4mm) 10.0 MHz 0.250”/6.35mm 32-392F/0-200C Right Angle Potted - Lemo 00
*LPM = Low Profile Mini; probe height 16mm, top dia. 12mm

Composite Dual Transducers

ECHO Part Echo to Echo Range Temperature
Model No. Range in Steel in Steel Freq. Diameter Range Connector Type
8, 9 DC-110 0.200”-20” (5.08mm-508mm) Not Recommended 1.0 MHz 1”/25.4mm 10-160F/–12-70C Right Angle Potted - Lemo 00

8, 9 DC-175 0.150”-20” (3.81mm-508mm) Not Recommended 1.0 MHz 0.750”/19.05mm 10-160F/–12-70C Right Angle Potted - Lemo 00

8, 9 DC-250 0.100”-20” (2.5mm-508mm) 0.200”-2” (5.08mm-50.8mm) 2.25 MHz 0.500”/12.7mm 10-160F/–12-70C Right Angle Potted - Lemo 00

8, 9 DC-525 0.030”-20” (0.76mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.250”/6.35mm 10-160F/–12-70C Right Angle Potted - Lemo 00

8, 9 DC-537 0.040”-20” (1mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.375”/9.52mm 10-160F/–12-70C Right Angle Potted - Lemo 00

8, 9 DC-550 0.030”-20” (0.76mm-508mm) 0.080”-2” (2mm-50.8mm 5.0 MHz 0.500”/12.7mm 10-160F/–12-70C Right Angle Potted - Lemo 00

Dual Echo To Echo Transducers

ECHO Part Echo to Echo Range Temperature
Model No. Range in Steel in Steel Freq. Diameter Range Connector Type
8, 9 DK537EE 0.040”-20” (1mm-508mm) 0.080”-1.5” (2mm-38.1mm) 5.0 MHz 0.375”/9.52mm 31-392F/0-200C Right Angle Potted - Lemo 00

8, 9 DK-718EE 0.030”-1.5” (0.76mm-38.1mm) 0.060”-1.0” (1.5mm-25.4mm) 7.5 MHz 0.187”/4.75mm 31-392F/0-200C Right Angle Potted - Lemo 00

Dual High Temp Transducers

ECHO Part Echo to Echo Range Temperature
Model No. Range in Steel in Steel Freq. Diameter Range Connector Type
–5 to 950F Straight Microdot
8, 9 DHT-537 0.040”-20” (1mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.375”/9.52mm
–20 to 509C requires detachable cable
–5 to 950F Right Angle Microdot
8, 9 DHT-537RM 0.040”-20” (1mm-508mm) 0.080”-2” (2mm-50.8mm) 5.0 MHz 0.375”/9.52mm
–20 to 509C requires detachable cable

Quick Change Composite Element Angle Beam Transducers

Available in: Diameter: 1/4”, 3/8” & 1/2”; Frequencies: 1.0, 2.25, 3.5, 5.0, 7.5 & 10.0 MHz; Standard Wedges: 30°, 45°, 60°, 70°

www.danatronics.com 9
Danatronics Transducers
Standard Contact
Contact Transducers
ECHO Part Range in Steel Range in Steel Range in Steel Range in Temperature Connector
Model No. Class 1 Class 2 Class 3 Plastic Freq. Diameter Range Type*
0.100”-20” 0.500” 32-392F Right Angle
7, 8 DCK-250 n/a n/a n/a 2.25 MHz
(2.54mm -508mm) 12.7mm 0-200C Microdot
0.040”-20” 0.250” 32-392F Right Angle
7, 8 DCK-525 n/a n/a n/a 5.0 MHz
(1mm-508mm) 6.35mm 0-200C Microdot
0.040”-20” 0.375” 32-392F Right Angle
7, 8 DCK-537 n/a n/a n/a 5.0 MHz
(1mm-508mm) 9.52mm 0-200C Microdot
0.080”-20” 0.500” 32-392F Right Angle
7, 8 DCK-550 n/a n/a n/a 5.0 MHz
(2mm - 508mm) 12.7mm 0-200C Microdot
0.030”-10” 0.187” 32-392F Right Angle
7, 8 DCK-718 n/a n/a n/a 7.5 MHz
(.76mm - 254mm) 4.75mm 0-200C Microdot
0.020”-2” 0.25” 32-392F Right Angle
7, 8 DCK-1025 n/a n/a n/a 10.0 MHz
(.5mm - 50.8mm) 6.35mm 0-200C Microdot
DCK- 0.020-1” 0.25” 32-392F Right Angle
7, 8 n/a n/a n/a 10.0 MHz
1025HR (.5mm - 25.4mm) 6.35mm 0-200C Microdot
0.016”-1” 0.125” 32-392F Right Angle
7, 8 DCK-20125 n/a n/a n/a 20.0 MHz
(.4mm - 25.4mm) 3.175mm 0-200C Microdot

Contact Composite
ECHO Part Range in Steel Range in Steel Range in Steel Range in Temperature Connector
Model No. Class 1 Class 2 Class 3 Plastic Freq. Diameter Range Type*
0.300”-20” 1” 10-160F Right Angle
7, 8 DCC-110 n/a n/a n/a 1.0 MHz
(7.62mm - 508mm) 25.4mm –12-70C Microdot
0.300”-20” 0.750” 10-160F Right Angle
7, 8 DCC-175 n/a n/a n/a 1.0 MHz
(7.62mm - 508mm) 19.05mm –12-70C Microdot
0.100”-20” 0.500” 10-160F Right Angle
7, 8 DCC-250 n/a n/a n/a 2.25.0 MHz
(2.54 - 508mm) 12.7mm –12-70C Microdot
0.040”-20” 0.375” 10-160F Right Angle
7, 8 DCC-537 n/a n/a n/a 5.0 MHz
(1mm-508mm) 9.52mm –12-70C Microdot

Delay Line Standard

Delay Line Transducers
ECHO Part Range in Steel Range in Steel Range in Steel Echo to Echo Range in Temperature Connector
Model No. Corrosion Mode Class 2 Class 3 Range in Steel Plastic Freq. Diameter Range Type*
0.080”-0.750” 0.025-0.500” 0.020”-0.375” 0.025” – 0.400” 0.010”- 0.150” 5.0 0.25” 32-122F Right Angle
7, 8, 9 DLK-525
(2mm-19mm) (6.35mm - 12.7mm) (0.5mm - 9.5mm) (0.635mm-10.16mm) (0.254mm -3.81mm) MHz 6.35mm 0-50C Microdot
0.080”-0.750” 0.020”-0.500” 0.015”-0.375” 0.025” – 0.400” 0.010”-0 .150” 10.0 0.25” 32-122F Right Angle
7, 8, 9 DLK-1025
(2mm-19mm) (0.5mm - 12.7mm) (0.38mm - 9.5mm) (0.635mm-10.16mm) (0.254mm -3.81mm) MHz 6.35mm 0-50C Microdot
DLK- 0.080”-0.300” 0.020”-0.200” 0.015”-0.125” 0.020” – 0.200” 0.015”-0.060” 12.0 0.080” 32-122F Right Angle
7, 8, 9
1225PP-SM (2mm-7.62mm) (0.5mm - 5.08mm) (0.38mm - 5.08mm) (0.508mm-5.08mm) (0.15mm - 1.52mm) MHz 2mm (tip dia) 0-50C Microdot
DLK- 0.080”-0.300” 0.020”-0.200” 0.015”-.125” 0.020” – 0.200” 0.015”-0.060” 12.0 0.080” 32-122F Right Angle
7, 8, 9
1225PP-RM (2mm-7.62mm) (0.5mm - 5.08mm) (0.38mm - 5.08mm) (0.508mm-5.08mm) (0.15mm - 1.52mm) MHz 2mm (tip dia) 0-50C Microdot
0.015”-0.300” 0.006”-0.200” 0.003”-0.100” 0.25” 32-122F Right Angle
7, 8 DLK-2025 n/a n/a 20 MHz
(3.81mm - 7.62mm) (0.152mm- 7.62mm) (0.076mm - 2.54mm) 6.35mm 0-50C Microdot
0.015”-0.200” 0.006”-0.200” 0.003”-0.100” 0.125” 32-122F Right Angle
7, 8 DLK-20125 n/a n/a 20 MHz
(3.81mm - 7.62mm) (0.152mm- 7.62mm) (0.076mm - 2.54mm) 3.175mm 0-50C Microdot

Delay Line Composite

ECHO Part Range in Steel Range in Steel Range in Steel Range in Temperature Connector
Model No. Class 1 Class 2 Class 3 Plastic Freq. Diameter Range Type*
0.040”-0.500” 0.030”-0.375” 0.020”-0.200” 0.375” 32-122F Right Angle
7, 8 DLC-525 n/a 5.0 MHz
(1mm - 12.7mm) (0.762mm-9.5mm) (0.5mm - 5.08mm) 9.52mm 0-50C Microdot

*Right Angle Microdot – requires additional cable

10 ECHO SERIES
Specifications
GENERAL Data XL: Interface program to send and receive stored read-
ings, latest firmware and application set up files as two way
Size: Length 7.25” x Width 4.00” x Height 2.00” (184mm x communication from ECHO to computer (excel). Saved read-
101.6mm x 50.8mm) ings are .csv files and directly interfaces with Microsoft Excel.
Weight: 1.15 lbs (.52 kg) with internal Li-Ion battery, 1.0 lb. USB: USB 2.0
(.45 kg) with optional Alkaline tray including 3 AA batteries
Temperature (gage operating): -4 to 122F (-20 to 50C) MEASUREMENTS
Package: Designed for IP67 rating, custom, splash-proof, high Gain: Low, Standard, High, and Automatic Gain Control (AGC).
impact plastic with illuminating rubber keypad for go/no-go 20-94 db in 1 db increments for gages with waveform.
testing Zoom: Automatically centers echos in the center of the dis-
Transducer Connector Type: Lemo 00 (2 qty) play independent of material thickness
Bandwidth: 0.5-30 Mhz (-3dB) Units: English, Metric, Microseconds
Measurement Rate: 4 Hz or 25 Hz. Fast Min/Max: Displays minimum and maximum simultane-
ously with actual thickness at 25 Hz.
Pulser: 150V, Square Wave
Alarms: Gage beeps and display changes color based on
Range: Thickness range depends on gage type, probe selec- alarm condition
tion and material conditions. Typical range in corrosion mode,
.020 - 23” (.076 - 584 mm). Typical range in precision mode, Vibrate: Gage can be set to vibrate on alarm (ideal for loud
.006-23” (.152 -584 mm) in steel, as low as .003” (.076 mm) in environments)
plastic Transducers: Single, dual, delay lines, contact, immersion
Calibration: Cal zero, Cal velocity, Two-point calibration or (depends on gage type)
Auto Calibration performs a two-point calibration using a ECHO 9 Measurement Types: ECHO 9 corrosion gage: Main
5-step test block bang to first backwall echo, echo to echo and velocity mode
Material Velocity Range: .0200 in/usec-.7362 in/ µS (0.508- (displays acoustic sound speed based on entered thickness)
18.699 mm/ µS) ECHO 7 & 8 Measurement Types: A precision gage: Class 1,
Languages: English, French, German, Spanish, Italian, Rus- Main bang to first back wall echo, Class 2, Interface echo to
sian, Czech, Finnish, Chinese, Japanese, Hungarian first backwall and Class 3, echo to echo after interface echo…
Class 2 and 3 use high frequency single element delay lines
Batteries: Standard 3.7 V Li Ion internally rechargeable bat- or immersion probes, velocity mode (displays acoustic sound
tery (11-27 hours; Standard mode of 4Hz and 74% brightness: speed based on entered thickness)
27 hour continuous operation, Fast mode at 25Hz, continuous
measurements in echo to echo mode: 11 hours) or optional Freeze Mode: Direct access to freeze display (ideal for high
alkaline tray for 3 AA batteries temperature applications)
Shut off: selectable auto shut off 1-31 min. or never shut off Hold Mode: Holds display to retain last thickness reading
Transport case: Hard Plastic with high density molded foam Differential Mode: Displays the difference from actual
cut out for gage and most accessories thickness measurement in absolute or percentage of a user
entered reference value
Certifications: CE certified, RHOS compliant, designed for
IP67 Resolution: .001” or .010” (.01mm or .1mm) as corrosion gage
and .0001” or .001” (.001mm or .01mm) as a precision gage
Standard Inclusions: ECHO series ultrasonic thickness gage,
a transducer (ECHO 9 – DKS-537, ECHO 7,8 – choice of trans- ACCESSORIES
ducer up to 10mhz), transducer cable, 2oz bottle of couplant, ECHO-MBH: Magnetic ball head/pipe stand for ECHO series
operation manual, Data XL interface program, USB cable, (attaches to 1/4x20 standard connection point on the back of
Charger Adapter, Transport Case *A transducer is included the unit)
with each model. Contact Danatronics for details based on
exact inclusion per model ECHO RB: Rubber boot available with padded wrist strap, 4
point chest harness, chest harness, built in bail (stand) with
Warranty: Limited 2 year warranty under normal use on locking position and finger strap for easy one hand operation.
parts and labor for gage. Optional Dan-A-Care to add up to 3 ECHO RB is included with ECHO 7,8 or 9 as DLW models
more years
ECHO-ABP: Alkaline Battery Pack (3- AA) for ECHO series.
DISPLAY Battery life 3 Hours
Display: 3.5” high resolution color TFT display, 320 x 240 ECHO-RPP: Remote Power Pack plugs into USB port to pro-
pixels (1/4 VGA), sunlight readable, including multiple color vide power/recharge to ECHO series
pallets
HARDWARE/SOFTWARE
Backlight: Light Emitting Diode (LED) backlight. Includes vari-
able light intensity. Hardware Options: EZ Scan B-Scan encoder, Bluetooth, foot
switch
DATALOGGER Field Upgradeable Software Options: Datalogger with
Memory: Internal memory for stored setups standard on all B-scan, Live waveform, Precision mode, Corrosion mode,
models. For Datalogger models 2GB micro SD card standard Oxide scale, Angle Beam
and expandable up to 32GB Data XL Pro Software: allows sending of A and B-scan imag-
Stored Application Setups: Storage and recall of 2,700 cali- es to computer for advanced reporting
bration and set up files

www.danatronics.com 11
 ECHO 9 ECHO 7 ECHO 8
Corrosion Gage Precision Gage Corrosion and Precision Gage
Item SpecificatiOn ECHO 9 9W 9 DL 9 DLW ECHO 7 7W 7 DL 7 DLW ECHO 8 8W 8 DL 8 DLW

4 or 25 Hz. displays actual and

Scan Mode            
min or max at same time
2 Gb micro SD included,
Memory O O   O O   O O  
expandable to 32 Gb
Display color changes and can
Alarms            
vibrate on alarm
Transluscent F keys, red,
Illuminating
yellow, green for alarm, blue            
Keypad
for charging
Displays material sound speed
Velocity Mode            
after entered known thickness
Echo To Echo Ignores coatings     * * * *    
Can adjust range from zoom,
Range O  O  O  O  O  O 
0.5, 1, 2,5, 10, 23”
Rectification Half +, half –, full rf O O O  O O O  O O O 
Live Waveform Displays live waveform
O  O  O  O  O  O 
(A-Scan)
Alpha numeric 20 character ID,
Datalogger 32 character file, linear, 2d, 3d O O   O O   O O  
and boiler
Displays time based cross
B-Scan O O   O O   O O  
section of material under test
Displays endcoded cross
B-Scan Encoder
section of material under test
O O O O * * * * O O O O

Wide variety of dual

Dual Probe Use
transducers from 1 to 10 Mhz.
    * * * *    
Single Element Wide variety of single element
LTD LTD LTD LTD        
Probe transducers from 1 to 20 Mhz
Store up to 2,700 custom
Stored Setups            
applications with file naming
Coating Displays substrate and coating
O  O  O  O  O  O 
Thickness thickness simulaneously
Corrects for sound speed
Temperature
difference at elevated O    O    O   
Correction
temperatures
Alkaline Abilty to swap in
O O O O O O O O O O O O
Battery Tray 3 AA batteries
Custom rubber boot with
Rubber Boot built-in bail and 4 point O O O  O O O  O O O 
chest harness
*available with software upgrade to ECHO 8
O = Software Options that are field upgradeable. Encoded B-Scan requires additional hardware modifications.
LTD = Limited, see transducer chart

Danatronics Corporation, 150A Andover St., Suite 8C, Danvers, MA 01923

Tel: 978-777-0081 • Fax: 978-777-3798 • www.danatronics.com
Copyright 2016 by Danatronics • Specifications subject to change without notice.