Product Description: 26 inch TFT-LCD PANEL

AUO Model Name: T260XW02 VG

Customer Part No/Project Name:

Customer Signature Date AUO Date

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 Document Version: 1.0
Date:2006/12/1

Product Functional Specification

26” Color TFT-LCD Module

Model Name: T260XW02 VG
(QDI Model: QD26HL0101)

() Preliminary Specification
(*) Final Specification

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 This specification sheet is for model name change, since AUO merged QDI from
2006/10/1
This Specification Sheet keep the original QDI Model name and Spec.
New Model name and old model name comparison table as following:
AUO QDI
Model Name T260XW02 VG QD26HL0101
Change Item 1. Carton Printing format
2. Product Serial label format

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 Revision History

REV. Date ECN NO. Change Content

1 12/1 Change AUO product name

r k . oc . t eehSa t aD.www

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com / t en .U4 t eehSa t aD.www/ / : p t t h - f dp t eehsa t aD
 Content List
Page
1. Application 5
2. Overview 5
3. General Specifications 5
4. Input Terminals 6
5. Absolute Maximum Ratings 5
6. Electrical Characteristics 11
7. Timing Characteristics 15
8. Input Signals, Basic Display Colors and Gray
Scale of Each Color 17
9. Optical Characterics 18
10. Display Quality 21
11. Handling Precautions 21
12. Reliability Test Items 21
13. Others 22
14. Drawing 23

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 1. Application
This specification applies to a color TFT-LCD module, QD26HL01

2. Overview
This module is a color active matrix LCD module incorporating amorphous
silicon TFT (Thin Film Transistor). It is composed of a color TFT-LCD panel;
driver ICs, control circuit and power supply circuit and a backlight unit.
Graphics and texts can be displayed on a 1366×3× 768 dots panel with 16.7
million colors by using the LVDS (Low Voltage Differential Signaling) interface,
8-bit driving method and supplying +12V DC supply voltage for TFT-LCD panel
driving.
The TFT-LCD panel used for this module has very high aperture ratio. A
low-reflection and higher-color-saturation type color filter is also used for this
panel. Therefore, high-brightness and high-contrast image, which is suitable for
the LCD TV,HDTV and multimedia use, can be obtained by using this module.

[Features]
1) High aperture panel; high-brightness
2) Brilliant and high contrast image.
3) High speed response www.DataSheet.co.kr

4) WXGA resolution. 16:9

5) LVDS interface.
6) QSV technology
7) Wide viewing angle.

3. General Specifications
Parameter Specifications Unit
Display size 66.05 (26") Diagonal cm
Active area 575.769 (H)×323.712 (V) mm
Pixel format 1366 (H)× 768 (V) Pixel
(1 pixel = R+G+B dots)
Pixel pitch 0.4215 (H) × 0.4215 (V) mm
Pixel configuration R,G,B vertical stripe
Display mode Normally Black
Unit outline dimensions 626 x 373 mm
Thickness Typ. 40.9 mm

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 Weight TBD g
Surface treatment Anti-glare(12%) and
hard-coating 3H
Lamp Quantity 8 U shape pcs

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 4. Input Terminals
4-1. TFT-LCD panel driving
CN1 (LVDS signals and +12V DC power supply)
Connector on Panel : FI-X30SSL-HF(Manufactured by JAE) or
Equivalent
Mating connector : FI-30C2L (Manufactured by JAE) or Equivalent

Pin No Symbol Description Default

1 VCC +12V, DC, Regulated

2 VCC +12V, DC, Regulated

3 VCC +12V, DC, Regulated

4 VCC +12V, DC, Regulated

5 GND Ground and Signal Return

6 GND Ground and Signal Return

7 GND Ground and Signal Return

8 GND Ground and Signal Return

9 LVDS Option High/Open for Normal (NS), Low for JEIDA Default NS type
www.DataSheet.co.kr

10 Reserved N.C. Test Mode?

11 GND Ground and Signal Return for LVDS

12 RXIN0- LVDS Channel 0 negative

13 RXIN0+ LVDS Channel 0 positive

14 GND Ground and Signal Return for LVDS

15 RXIN1- LVDS Channel 1 negative

16 RXIN1+ LVDS Channel 1 positive

17 GND Ground and Signal Return for LVDS

18 RXIN2- LVDS Channel 2 negative

19 RXIN2+ LVDS Channel 2 positive

20 GND Ground and Signal Return for LVDS

21 RXCLKIN- LVDS Clock negative

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 22 RXCLKIN+ LVDS Clock Positive

23 GND Ground and Signal Return for LVDS

24 RXIN3- LVDS Channel 3 negative

25 RXIN3+ LVDS Channel 3 positive

26 GND Ground and Signal Return for LVDS

27 Reserved N.C. Test Mode?

28 Reserved N.C. Test Mode?

29 GND Ground and Signal Return

30 GND Ground and Signal Return

【Note 1 】All GND(ground) pins should be connected together.

【Note 2】All VDD (power supply) pins should be connected together.

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 4-2 Interface block diagram

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheetpdf-htp:/www.DataSheet4U.net/
 4-3. Backlight driving
4-3-1. Inverter Connector
Connector on Inverter : S14B-PH-SM3(Manufactured by JST) or
Equivalent
Mating connector : PHR-14 (Manufactured by JST) or Equivalent
( ):need further discussion on both sides

Pin No Symbol Description Default

1 VIN Operating Voltage Supply, +24V DC regulated 24V

2 VIN Operating Voltage Supply, +24V DC regulated 24V

3 VIN Operating Voltage Supply, +24V DC regulated 24V

4 VIN Operating Voltage Supply, +24V DC regulated 24V

5 VIN Operating Voltage Supply, +24V DC regulated 24V

6 BLGND Ground and Current Return GND

7 BLGND Ground and Current Return GND

8 BLGND Ground and Current Return GND

9 BLGND Ground and Current Return GND

10 BLGND Ground and Current Return

www.DataSheet.co.kr
GND

11 ADIM Analog Dimming : Open/High(3.3V) for Max. Lum. Max

12 ON/OFF BL On-Off : High(3.3V)or( Open) for BL On as default On

PWM Dimming Control : Open/High(3.3V) for Max.

13 PDIM Max
Lum

Selection of lumimance control method, Vcx duty:high/,

14 PESEL
PWM duty:low/open
4-3-2. Lamp connector

TBD

5. Absolute Maximum Ratings

LCD module
Parameter Symbol Condition Ratings Unit Remark

+12V supply voltage VDD Ta=25℃ -0.3 〜 ＋14.0 Ｖ

Storage temperature Tstg － －20 〜 ＋60 ℃ 【Note1】

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheetpdf-htp:/www.DataSheet4U.net/
 Operating temperature (Ambient) Topa － 0 〜 ＋50 ℃

【Note1】Humidity：90%RH Max. at Ta≦40℃.

Maximum wet-bulb temperature at 39℃ or less at Ta>40
℃.
No condensation.

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 6. Electrical Characteristics
6-1.TFT-LCD panel driving
Ta ＝25℃
Parameter Symbol Min. Typ. Max. Unit Remark
VDD Supply voltage VDD 11.4 +12.0 12.6 Ｖ 【Note2】
Current dissipation IDD － 340 700 ｍＡ 【Note3】
Permissive input ripple VRP － － 120 mV p-p VDD=+12V
voltage
Differential input High VTH － － 100 mV
VCM=+1.2V
threshold voltage Low VTL -100 － － mV 【Note1】
Rush current I RUSH 3.0 A Rise time
470uS
【Note1】 VCM : Common mode voltage of LVDS driver.

【Note2】
Power On-off sequence

90% 90%
www.DataSheet.co.kr

Power Supply For 10% 10%

LCD 0V

T1 T2 T5 T6 T7

10% Valid 10%

Interface Signal

T3 T4

Lamp
Power for LAMP ON

1ms＜T1,T6≦10 ms 0.5ms＜T2,T5≦50 ms 200ms＜T3,T4 T7＞1 s

【Note3】 Maximum current condition; Change to 1x1 dot checker board

pattern. VDD=+12V

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.ne
 R G B R G B ：0 GS ：255 GS
R G B R G B

R G B R G B

R G B R G B

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 6-2. Backlight driving
The backlight system is a direct-lighting type with 8 U shape CCFT (Cold
Cathode Fluorescent Tube).
The characteristics of the lamp are shown in the following table.
Parameter Symbol Min. Typ. Max. Unit Remark
Lamp current range IL 5.5 6 6.5 mAr 【Note1】
ms
Lamp voltage VL 1000 Vrms
Lamp power PL 6 Ｗ 【Note2】IL=mA
consumption
Lamp frequency FL 42 45 48 kHz 【Note3】
Established starting Vs 1100 1500 Vrms Ta=25
voltage ℃
1200 1500 Vrms Ta=0℃ 【Note4】
Lamp life time LL 50000 hour 【Note5】

【Note1】 Lamp current is measured with current meter for high frequency as
shown below.

www.DataSheet.co.kr

【Note2】 Calculated Value for reference ( IL × V L)

【Note3】 Lamp frequency may produce interference with horizontal
synchronous frequency, and this may cause beat on the display.
Therefore lamp frequency shall be detached as much as possible from
©Copyright AU Optronics, Inc.
Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.ne
 the horizontal synchronous frequency and from the harmonics of
horizontal synchronous to avoid interference.
【Note4】 The voltage above this value should be applied to the lamp for more
than 1 second to start-up. Otherwise the lamp may not be turned on.
【Note5】 Lamp life time is defined as the time when either ① or ② occurs
in the continuous operation under the condition of Ta = 25 ℃ and IL =
6mArms.
① Brightness becomes 50 % of the original value under standard
condition.
② Kick-off voltage at Ta = 0℃ exceeds maximum value.

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 【Note6】 The performance of the backlight, for example life time or brightness,
is much influenced by the characteristics of the DC-AC inverter for
the lamp. When you design or order the inverter, please make sure
that a poor lighting caused by the mismatch of the backlight and the
inverter (miss-lighting, flicker, etc.) never occur. When you confirm it,
the module should be operated in the same condition as it is installed
in your instrument.
【Note7】The lamp wire length is TBD mm(from AL back cover surface to
connector, not including connector length)
6-3 Backlight inverter

6-3-1. Inverter Electrical Characteristics

Parameter Symbol Min. Typ. Max. Unit Notes

Power VDDB 22.8 24 25.2 Vdc
Supply Input
Voltage
Power IDDB 3300 3600 3900 mA
Supply Input
Current www.DataSheet.co.kr

Power PB 86.4 W
Consumption

6.4 Luminance Controls

Method Adjustment and Luminance Ratio PESEL PDIM Remark
Voltage Adjustment – Continuous High/Open N/A
control adjustment of for max.
Luminance by adjusting the voltage
of
BRTI within the rated range.
BRTI voltage Luminance ratio
0V 20%(minimum)
3.3V 100%
(maximum)
PWM Adjustment- The luminance is LOW PWM See
control controlled by duty ratio of BRTP singal PWM

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 signal when PWSEL is low and timing
PWM signal is inputted into BRTP
termial.
Duty Ratio Luminance Ratio
0.2 20%(minimum)
1.0 100%
(maximum)

6-5. PWM timing

6-5-1. Timing diagram

- Outline

BRT
A 0≤tPWL≤50ms

www.DataSheet.co.kr

BRT
0≤tPWL≤50ms 0≤tPWL≤50ms

- Detail of A part

VBP

VBP

tPWH tPWL

tPW

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheetpdf-htp:/www.DataSheet4U.net/
 6-5-2. Each parameter
Parameter Symbol Min. Typ. Max. Unit Notes
Luminance control FL 230 255 280 Hz 1, 2
Duty Ratio DL 0.2 - 1.0 - 1, 3
Non signal Period tPWL 0 - 50 Ms 4

Notes : 1. Definition of parameters is as follows

1 tPWH
FL= , DL=
tPW tPW

2. See the following formula for luminance control frequency.

Luminance control frequency = tvv X (n+0.25)[or(n+0.72)]
n=1,2,3,…………
tvv : See “7.1 Signal timing specification”

The interference noise of luminance control frequency and input signal frequency for
LCD

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 7. Timing characteristics of LCD module input signals
7-1. Timing characteristics
(This is specified at digital outputs of LVDS driver.)
Symbol Min Typ Max Unit Notes
ITIME
DCLK Frequency FCLK 80 82 MHz
-

Period tCLK 12.2 12.5 - ns

Hsync Period t HA 1512 1648 1780 tCLK
Width-Active t HC 8 16 -
Frequency fH 44 48.54 52 kHz
Vsync Frequency fv 47 60 63 Hz
Period tVA 774 810 - tHA
Width-Active tVC 2 6 -

Data Horizontal back tHD 8 80 - tCLK

Enable porch
Horizontal front tHF 16 186 - tCLK
porch
Horizontal active t HE 1366
w w w . D a t a S h e e t . c o . k r
1366 1366 tCLK
Horizontal blanking tHB 146 282 tCLK
Vertical back porch tVD 2 20 - t HA
Vertical front porch t VF 2 16 - t HA
Vertical active t VE 768 768 768 tHA

Vertical blanking tVB 6 42 tHA

Notes : 1.The performance of electro-optical characteristics may be influenced by

variance of the vertical refresh rate.
2. Hsync period will be a double number of character (8).

7-2 Signal Timing Waveform(The time “B” is tHB on horizontal timing and t VB on vertical
timing)

Data
Ｂ

ENAB
©Copyright AU Optronics, Inc.
Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.n
 Sync
Ｃ Ｄ Ｅ Ｆ

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 8. Input Signals, Basic Display Colors and Gray Scale of Each Color
Colors & Data Signal
Gray scale R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Black
Basic Color

Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Gray Scale of Red

ñ 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Darker 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ñ á á á
ò â â â
www.DataSheet.co.kr

Bright 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ò 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ñ
Gray Scale of Green

0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Darker 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ñ á á á
ò â â â
Bright 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0
ò 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Gray Scale of Blue

ñ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Darker 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
ñ á á á
ò â â â

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 Bright 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1
ò 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

0 : Low level voltage, 1 : High level voltage

w w w . D a t a S

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com D a

 9. Optical Characteristics
Ta=25℃, VDD=+12V
Parameter Symbol Condition Min. Typ. Max. Unit Remark
Viewing L/R θ21,θ22 CR>10 85 Deg. 【Note1,4】

angle U θ11 85 Deg.

D θ12 85 Deg.
range
Contrast ratio ＣＲn θ=0° 600 － 【Note2,4】

Response time τ － 25 － ms 【Note3,4】

Rise time τr TBD － ms

Fall time τd TBD － ms
Chromaticity of Wx 0.245 0.275 0.305 【Note4】

White (CIE 1931) Wy 0.268 0.298 0.328 Color temperature

10000K

Chromaticity of Rx TBD NTSC 72%

Red (CIE 1931) Ry TBD

Chromaticity of Gx TBD
Green (CIE 1931) Gy TBD
Chromaticity of Bx TBD
Blue (CIE 1931) By TBD
www.DataSheet.co.kr

Luminance of white ＹＬ 400 500 Cd/m

2
【Note4】

White Uniformity δＷ － - 1.3 【Note5】

Black Uniformity δB 1.3 【Note5】

※ The measurement shall be executed 30 minutes after lighting at rating. (typical cond
ition : IL = 6mArms)

The optical characteristics shall be measured in a dark room or equivalent state

TFT-LCD module
with the method shown in Fig.1 below.

Photo detector (BM-5A: TOPCON)

Field=2 o

Center of the

500 mm
©Copyright AU Optronics, Inc.
Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed LCD Panel

PDF created with FinePrint pdfFactory Procharacteristics

Fig 1. Optical trial version www.pdffactory.com
measurement Datasheet pdf - http://www.DataSheet4U.net/
 www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 【Note1】Definitions of viewing angle range:

【Note2】Definition of contrast ratio:

The contrast ratio is defined as the following.

Luminance (brightness) with all pixels

Contrast Ratio (CR) =
white
Luminance (brightness) with all pixels
black

【Note3】Definition of response time: www.DataSheet.co.kr

The response time is defined as the following figure and shall be

measured by
switching the input signal for "black" and "white" .

Black White Black

100%
Photo detector Output

90%
(Relative Value)

10%
0%
τr τd

time

【Note4】This shall be measured at center of the screen.

©Copyright AU Optronics, Inc.
Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 【Note5】Definition of white uniformity:
White and black uniformity is defined as the
following with nine measurements

H/4 H/2 3H/4

Ａ Ｄ V/4

Ｃ V/2

Ｂ Ｅ 3V/4
w w w . D a t a S h e e t . c o . k r

Maximum Luminance (of 5 points measurement)

δw, B = Minnum Luminance (of 5 points measurement)

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com D a t a s h e e t p

 10. Display Quality
The display quality of the color TFT-LCD module shall be in compliance
with the Incoming Inspection Standard.

11．Handling Precautions
a) Be sure to turn off the power supply when inserting or disconnecting the
cable.
b) Be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist.

c) Since the front polarizer is easily damaged, pay attention not to scratch it.
d) Wipe off water drop immediately. Long contact with water may cause
discoloration or spots.
e) When the panel surface is soiled, wipe it with absorbent cotton or other
soft cloth.
f) Since the panel is made of glass, it may break or crack if dropped or
bumped on hard surface. Handle with care.
g) Since CMOS LSI is used in this module, take care of static electricity and
injure the human earth when handling.
h) Observe all other precautionary requirements in handling components.
i) This module has its circuitry PCBs on the rear side and should be handled
carefully in order not to be stressed. www.DataSheet.co.kr

j) Laminated film is attached to the module surface to prevent it from being scratched . Peel the
film off slowly just before the use with strict attention to electrostatic charges. Ionized air shall
be blown over during the action. Blow off the 'dust' on the polarizer by using an ionized
nitrogen gun, etc..

12.Reliability test items

Test item Conditions

No.
1 High temperature storage test Ta = 60℃ 240h
2 Low temperature storage test Ta =-20℃ 240h
3 High temperature Ta = 50℃ ; 80 %RH 240h
& high humidity operation test
4 High temperature operation Ta = 60℃ 240h
test
5 Low temperature operation test Ta = 0℃ 240h

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 6 Vibration test (non- Frequency: 10〜500Hz, 1.0G , 20 min/each axis
operating)
7 Shock test Gravity : 100G
(non- operating) Pulse width : 2ms, half sine wave
Direction : ± X,±Y,±Z
Once for each direction.

w w w . D a t a S h e e t . c o . k r

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com D a t a s h e e t p

 13．Others
1) LCD Module Label:
Serial number Product Name

LWC295100001 QD26HL01 Rev.01

Serial Number Bar

Code
LWC295100001 Digital code 4, 5 is Date code.
Digital 4 (Year) 1: 2001, 2: 2002, 3:2003,….
Digital 5 (Month) 1: Jan, 2: Feb,… , A:Oct, B:Nov., C: Dec.

2) Adjusting volume has been set optimally before shipment, so do not change any adjusted value.
If adjusted value is changed, the specification may not be satisfied.
3) Disassembling the module can cause permanent damage and should be
strictly avoided.
4) Please be careful since image retention may occur when a fixed pattern is displayed for a long
time.
www.DataSheet.co.kr

5) If any problem occurs in relation to the description of this specification, it

shall be resolved through discussion with spirit of cooperation.

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 14. Drawing

www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/
 www.DataSheet.co.kr

©Copyright AU Optronics, Inc.

Sep, 2006 All Rights Reserved.
No Reproduction and Redistribution Allowed

PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com Datasheet pdf - http://www.DataSheet4U.net/