Scribd
Upload
40 views2 pages

OCM Microprocessor Board: Inputs

The document summarizes an OEM Controls microprocessor board. The board functions as a multi-valve driver with 8 current-regulated PWM outputs and additional digital I/O. It can operate as a standalone controller or as part of a larger CAN system. The board features inputs, outputs, an LCD display, and membrane keypad for calibration and troubleshooting without needing an external device.

Uploaded by

Abena Glez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views2 pages

OCM Microprocessor Board: Inputs

The document summarizes an OEM Controls microprocessor board. The board functions as a multi-valve driver with 8 current-regulated PWM outputs and additional digital I/O. It can operate as a standalone controller or as part of a larger CAN system. The board features inputs, outputs, an LCD display, and membrane keypad for calibration and troubleshooting without needing an external device.

Uploaded by

Abena Glez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

OCM 

Microprocessor Board
   

OEM Controls, the industrial leader of electro hydraulics controllers is pleased to introduce the latest 
microprocessor controller. OEM has developed this state‐of‐the‐art multi‐valve driving I/O CAN module 
with expandability in mind.  While the unit can be used as a stand alone multiple valve driver with 8 
current regulated PWM outputs (plus 4 no current regulated) and extra digital I/O for logic it can also be 
used as a master in multiple module CAN systems.    This module comes with an HMI display and buttons 
for easy adjustments / calibration and troubleshooting – no need for an external device or to connect to a 
computer. 

 
 
 
 
Inputs 
  6 analog (Voltage) Inputs Can Also be factory configured for sourcing digital inputs 
    11 Bit Input Option (0‐10vdc) 
Resolution = 11 bits  Each input is capable of commanding an output channel with 2000 discreet output                                      
levels. 
  5 Digital inputs can be factory configured for Sinking or Sourcing operation 

Outputs 
  8 – Outputs (4 channels) of current regulated 3 Amp PWN outputs 
  Proportional Outputs 1 – 4 calibrated with PWM frequency A 
  Proportional Outputs 5 – 8 calibrated with PWM frequency B 
  11 bit resolution – Each output is capable of providing 2,000 discreet output levels 
  Current regulated to +/‐ 5% for system voltage variation of +/‐25% on valve resistance increased of 0 to + 50% 
 
  4 Output (2 channels) of proportional PWM or digital sourcing 3 Amp 
  14 bit resolution – Each PWM output is capable of providing 2,000 discreet output levels 
  Proportional Outputs 9– 12 calibrated with PWM frequency C 
 
  PWM frequency range: 33‐250HZ 
  Optional Zenor clamp for Pulsar valves (Factory configured)   
 
Human Machine Interface 
  LCD Display   
  2 lines @ 16 characters for system operation and error codes 
  Low temperature display 
  Membrane keypad (4 buttons) for calibration – Intuitive menu system works in conjunction with LCD display 
                 which allows the operator to choose between the following parameters: 
Calibration and adjust  CAN Bus system state (optional)         
        Application state    Software information 
         
Power Requirements 
  8‐32VDC 
  Protection: Reverse polarity / Short circuit / Over voltage 
 
Connectors   
                  Main I/O – 35 Pin AMP connector 
                  4 Pin AMP connector (CAN Bus optional) 
 
 

            Standard OCM Mounting 

You might also like