Geotechniek Internationale Normen MRT 2022 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Internationale normen Geotechniek_mrt 2022

NEN-EN 1997-1+C1+A1:2016/NB:2019 nl Nationale bijlage bij NEN-EN 1997-1 Eurocode 7: Geotechnisch ontwerp – Deel 1: Algemene regels
NEN-EN 1997-2:2007/NB:2011 en Nationale bijlage bij NEN-EN 1997-2 Eurocode 7: Geotechnisch ontwerp - Deel 2: Grondonderzoek en beproeving (inclusief C1:2010)
NEN-EN 1997-2:2007/C1:2010 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
NEN-EN 1997-1+C1+A1:2016 Eurocode 7: Geotechnical design - Part 1: General rules
NEN-EN 1998-5:2005 Eurocode 8 - Design provisions for earthquake resistance of structures - Part 5: Foundations, retaining structures and geotechnical aspects
NEN-EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
NEN-EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls
NEN-EN 12699:2015 Execution of special geotechnical work - Displacement piles
NEN-EN 1537:2013 Execution of special geotechnical work - Ground anchors
NEN-EN 12715:2020 Execution of special geotechnical work - Grouting
NEN-EN 12716:2018 Execution of special geotechnical work - Jet grouting
NEN-EN 12063:2020 ontw Execution of special geotechnical work - Sheet-pile walls
NEN-EN 14679:2005/C1:2006 Execution of special geotechnical works - Deep mixing
NEN-EN 14731:2005 Execution of special geotechnical works - Ground treatment by deep vibration
NEN-EN 14199:2015 Execution of special geotechnical works - Micropiles
NEN-EN 14475:2006/C1:2006 Execution of special geotechnical works - Reinforced fill
NEN-EN 14490:2010 Execution of special geotechnical works - Soil nailing
NEN-EN 15237:2007 Execution of special geotechnical works - Vertical drainage
NEN-EN-ISO 22476-1:2012/C1:2013 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
NEN-EN-ISO 22476-10:2017 Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test
NEN-EN-ISO 22476-11:2017 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test
NEN-EN-ISO 22476-12:2009 Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM)
NEN-EN-ISO 22476-14:2020 Geotechnical investigation and testing - Field testing - Part 14: Borehole dynamic probing
NEN-EN-ISO 22476-15:2016 Geotechnical investigation and testing - Field testing - Part 15: Measuring while drilling
NEN-EN-ISO 22476-2:2005/A1:2011 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing
NEN-EN-ISO 22476-3:2005/A1:2011 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test
NEN-EN-ISO 22476-4:2021 Geotechnical investigation and testing - Field testing - Part 4: Prebored pressuremeter test by Ménard procedure
NEN-EN-ISO 22476-5:2012 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test
NEN-EN-ISO 22476-6:2018 Geotechnical investigation and testing - Field testing - Part 6: Self boring pressuremeter test
NEN-EN-ISO 22476-7:2012 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test
NEN-EN-ISO 22476-8:2018 Geotechnical investigation and testing - Field testing - Part 8: Full displacement pressuremeter test
NEN-EN-ISO 22476-9:2020 Geotechnical investigation and testing - Field testing - Part 9: Field vane test (FVT and FVT-F)
NEN-EN-ISO 22282-1:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules
NEN-EN-ISO 22282-2:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems
NEN-EN-ISO 22282-3:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock
NEN-EN-ISO 22282-4:2021 Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping tests
NEN-EN-ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests
NEN-EN-ISO 22282-6:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems
NEN-EN-ISO 18674-1:2015 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules
NEN-EN-ISO 18674-2:2016 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers
NEN-EN-ISO 18674-3:2018/A1:2020 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
NEN-EN-ISO 18674-4:2020 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers
NEN-EN-ISO 18674-5:2019 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC)
NEN-EN-ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
NEN-EN-ISO 14689-1:2018 Geotechnical investigation and testing - Idenfication and classification of rock - Part 1: Identification and description
NEN-EN-ISO 14688-1:2019+NEN 8990:2020 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description
NEN-EN-ISO 14688-2:2019+NEN 8991:2020 Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification
NEN-EN-ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
NEN-EN-ISO 17892-10:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
Internationale normen Geotechniek_mrt 2022

NEN-EN-ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
NEN-EN-ISO 17892-12:2018/A1:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
NEN-EN-ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
NEN-EN-ISO 17892-3:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
NEN-EN-ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
NEN-EN-ISO 17892-5:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
NEN-EN-ISO 17892-6:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
NEN-EN-ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
NEN-EN-ISO 17892-8:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
NEN-EN-ISO 17892-9:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils
CEN ISO/TS 24283-1:2022 Geotechnical investigation and testing - Qualification criteria and assessment - Part 1: Qualified technician and qualified operator
CEN ISO/TS 24283-2:2022 Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert
CEN ISO/TS 24283-3:2022 Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise
NEN-EN-ISO 22475-1:2021 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater
NPR-CEN-ISO/TS 22475-2:2006 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 2: Qualification criteria for enterprises and personnel
CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
NEN-EN-ISO 22477-1:2018 (Cor. 2019-10) Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing
NEN-EN-ISO 22477-10:2016 Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing
NEN-EN-ISO 22477-4:2018 Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles: dynamic load testing
NEN-EN-ISO 22477-5:2018 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors

You might also like