Active Directory Enumeration: Bloodhound: Table of Content

Download as pdf or txt
Download as pdf or txt
You are on page 1of 27

Active Directory Enumeration: BloodHound

In the article, we will focus on the Active Directory Enumeration tool called BloodHound. It
takes the data from any device on the network and then proceeds to plot the graph that can
help the attacker to strategize their way to the Domain Admins.

Table of Content
• Introduction
• Linux Installation
• Extracting Data from Domain
• Enumerating with BloodHound
• BloodHound on Windows
• Extracting Data from Domain
• Windows Installation
• Enumerating with BloodHound
• SharpHound on PowerShell
• SharpHound on PowerShell Empire
• Conclusion

Introduction
BloodHound is programmed to generate graphs that reveal the hidden and relationships within
an Active Directory Network. BloodHound also supports Azure. BloodHound enables the
Attackers to identify complex attack paths that would otherwise be not possible to identify. The
Blue Team can use BloodHound to identify and fix those same attack patterns.

Linux Installation
Some multiple guides and methods can help you set up and install bloodhound on your host
machine. We will be following the official documents of BloodHound that can be found on their
GitHub but refining the process. As always before installing any tool on your Linux Machine, it is
recommended to perform an update and upgrade your software packages. Also, for any reason,
if you don’t have Java installed, install java to continue. We won’t be installing java as we are
working on Kali Linux which comes preinstalled with Java. Configuring Bloodhound is a 3-step
process. BloodHound has a GUI and Data scrapper and neo4j Database. This means that we

www.hackingarticles.in 1 www.ignitetechnologies.in
need to configure them individually. We start with the Bloodhound GUI which can be installed
directly using the apt command.
apt install bloodhound

Next, we need to configure the neo4j service that will hold the data which can be represented
in graphical form. When we ran the apt install bloodhound, it installed neo4j with it. If that
didn’t happen in your case you can always download it by running apt install neo4j. Now, we
need to configure the authentication and other settings on the neo4j service. To do that we run
the neo4j console instance. It will host the Remote Interface which can be accessed using a
Web Browser. By default, it is hosted on port 7474.
neo4j console

www.hackingarticles.in 2 www.ignitetechnologies.in
Entering the URL that was highlighted in the image above in a Web Browser, we have the
remote interface. It has some prefilled values and some black fields. Here, enter a username,
we choose the username neo4j and enter a password. After entering the following information,
you will be able to connect to the neo4j database.

Before connecting, it will ask you to change the password as it is your first login. Enter any
password of your choice. And Move to connect the neo4j Remote Interface.

www.hackingarticles.in 3 www.ignitetechnologies.in
Now that we have the neo4j service up and running, we can run the Bloodhound GUI. Running
it is a simple task of typing bloodhound on your terminal and hitting Enter key. You can also try
to look for bloodhound in your list of installed applications in the menu of Kali Linux and run it
directly from there.

As soon as the BloodHound GUI kicks in, it asks for a set of credentials that we just set up in the
neo4j configuration. Use the same set of credentials and you will be able to login into this
interface. You can save your credentials so that you don’t need to log in each time you want to
use bloodhound.

www.hackingarticles.in 4 www.ignitetechnologies.in
After logging in on BloodHound GUI, it opens up a blank white screen with some interaction
buttons on the right-hand side and a search box on the left-hand side with some modules
attached to it. This is basically where the setting up of the GUI completes. As discussed in the
introduction, that Bloodhound represents the data in pretty graphs and searches for possible
paths. To plot the graphs, it requires data from the Domain. This data can be extracted using a
data scrapper which we now need to install.

www.hackingarticles.in 5 www.ignitetechnologies.in
To install this data Ingestor which is so unusually named bloodhound. This can lead to some
confusion but to make it clear once again. We installed BloodHound GUI in previous steps that
plot graphs based on the data. Now we are installing a bloodhound that will extract the data
from the Domain. As it is made in Python, we can use pip3 to install bloodhound as shown in
the image below.
pip3 install bloodhound

www.hackingarticles.in 6 www.ignitetechnologies.in
Extracting Data from Domain
We will run the python Bloodhound that we just installed using pip3 and extract the data from
the Domain. It is a good time to mention that here the Domain setup is in such a way that we
have connected the Domain Controller, Clients, and our Attacker Machine essentially in the
same network. To get data from the Domain, any user can be used. We will be using the
Administrator account to extract maximum data for this enumeration. In a realistic scenario,
you will end up with a normal user and then you will run the bloodhound and then use the data
enumerated to get to the Administrator. We need to provide the following parameters to
extract data from Domain: username, password, Name Server (IP Address of Domain
Controller), Domain and Data we want to extract (We are using “All” to extract maximum data
from the Domain). The data extracted will be in the form of .json files that will be created based
on the queries that ran across the Domain in search of possible paths and permissions of
various groups and users.
bloodhound-python -u administer -p Ignite@987 -ns 192.168.1.172 -d ignite.local -c All

After running bloodhound-python, you will have json files in your current directory. It is
possible to check them with the ls command. To analyze them in BloodHound GUI, you need to
drag and drop those json files onto the GUI. As it can be observed from the image below that
we have the computers.json, domains.json, groups.json, users.json.

www.hackingarticles.in 7 www.ignitetechnologies.in
Now that all the json files have been uploaded, BloodHound GUI can start plotting the graphs.
The way Bloodhound works is that now that it is loaded with the data files from the domain,
you can either enter queries to plot graphs or use the Pre-Built Queries. In this guide, we will be
using the Pre-Built Queries.

www.hackingarticles.in 8 www.ignitetechnologies.in
Enumerating with BloodHound
Let’s begin our enumeration with the Pre-Built Analytics Queries. First of them that we use is
the Find all Domain Admins. This Query will fetch all the Domain Admins it can find in its
database and plot them on the graph as shown in the image below. Since our Domain has only
one Domain Admin, it shows one node and then for 2 groups under that Domain Admin.

www.hackingarticles.in 9 www.ignitetechnologies.in
The next one is pretty interesting. This one is called Find Shortest Paths to Domain Admins. This
means that BloodHound will plot the Domain Admins and the users that it can find and then we
will be able to deduce what kind of path we want to take to go on exploiting so that we can
reach the Domain Admin with the least Resistance. As we can see in the image below, there are
4 paths among which two (yellow nodes) are equidistant. This means we can either use any one
of them to get to the Domain Admins and we know that there is Generic Write permission that
we can use to exploit to get to the Domain Admin. Hence, this is how in a particularly
complicated and big Domain Environment, it can help the attacker to figure out their way into
the mess and get that Domain Admin Access.

www.hackingarticles.in 10 www.ignitetechnologies.in
Another Prebuilt Query that we will be using is the Find AS-REP Roastable Users
(DontReqPreAuth) Query. AS-REP roasting is an offensive technique against Kerberos that
allows password hashes to be retrieved for users that do not require pre-authentication. If the
user has “Do not use Kerberos pre-authentication” enabled, then an attacker can recover a
Kerberos AS-REP encrypted with the user's RC4-HMAC’d password and he can attempt to crack
this ticket offline.
Pre-authentication is the initial stage in Kerberos authentication, which is managed by the KDC
Authentication server and is meant to prevent brute-force attacks.
From the image, we can see that the Japneet user is vulnerable to the AS-REP Roasting attack.
Learn More: AS-REP Roasting

www.hackingarticles.in 11 www.ignitetechnologies.in
The conclusion that we came to according to our Enumeration with BloodHound is that the
Japneet user is vulnerable to AS-REP Roasting. This claim can be verified by browsing the Active
Directory Users and Computers and then further descending into the user Properties of the
Japneet user. In the Japneet user Properties Window, there is an Account Tab. Inside the
Account tab, we can see that the Japneet user does not require Kerberos preauthetication.

www.hackingarticles.in 12 www.ignitetechnologies.in
Another attack for which we can enumerate using the BloodHound is the DC Sync Attack. This
attack allows an attacker to replicate Domain Controller (DC) behavior. Typically impersonates
as a domain controller and requests other DC’s for user credential data via GetNCChanges. But
compromised account should be a member of administrators, Domain Admin, or Enterprise
Admin to retrieve account password hashes from the others domain controller.

www.hackingarticles.in 13 www.ignitetechnologies.in
From the BloodHound graph, we can see that Geet user is vulnerable to this attack.
Learn More: DCSync Attack

The conclusion that we came to according to our Enumeration with BloodHound is that Geet
user is vulnerable to DCSync Attack. This claim can be verified by browsing the Active Directory
Users and Computers and then further descending into the user Properties of the Geet user. In
the Geet user Properties Window, there is a Member Of Tab. Inside the Member Of tab, we can
see that the Geet user is a part of Domain Admins which makes that user vulnerable to DC Sync
Attack.

www.hackingarticles.in 14 www.ignitetechnologies.in
The next enumeration that we are going to perform using BloodHound is the Listing of all
Kerberoastable Accounts. Kerberoasting is a technique that allows an attacker to steal the
KRB_TGS ticket, which is encrypted with RC4, to brute force application services hash to extract
its password. From the graph plotted by the BloodHound, it can be said that KRBTGT and
SVC_SQLSERVICE are the two users that are vulnerable to this attack.

www.hackingarticles.in 15 www.ignitetechnologies.in
Learn More: Kerberoasting Attack

There are a lot of different custom queries and built-in queries that can be used to enumerate
using BloodHound. Once you are done with the Enumeration and Analysis, you can clear the
database of values and add new JSON files of different values by browsing the Database Info
tab on BloodHound GUI and Clicking the Clear Database Button as demonstrated below.

www.hackingarticles.in 16 www.ignitetechnologies.in
BloodHound on Windows
It is possible to analyze and enumerate BloodHound directly from a Windows machine as well.
This can be helpful in the Environments that restrict the deployment of Kali Linux and other
attacker tools. The process remains more or less the same. We need to set up the Data
Ingestor, BloodHound GUI, and neo4j database on Windows Machine as we did in Linux earlier.
To begin, we will be installing the Data Ingestor for Windows that is named Sharphound. The
difference between the Linux Ingestor and Windows Ingestor is that instead of crafting JSON

www.hackingarticles.in 17 www.ignitetechnologies.in
files, the SharpHound creates a compressed file that includes csv files. The data collection
method remains the same.
SharpHound can be Downloaded for GitHub.

Extracting Data from Domain


In the image presented below, it can be observed that when the attacker runs the SharpHound
on the machine connected to Domain, it created a compressed file with the BloodHound name
as highlighted.
sharphound.exe
dir

Windows Installation
From the Linux setup, we remember that BloodHound requires the neo4j service. It can be
downloaded for Windows and then run using a batch file that comes with the installation
package. This service runs on port 7474 as well.
Download Neo4j Windows

www.hackingarticles.in 18 www.ignitetechnologies.in
dir
neo4j.bat console

We take the URL from the neo4j console and open it in our Web Browser. If we remember
correctly, we require to configure the credentials at this stage which will also be used for the
BloodHound as well.

www.hackingarticles.in 19 www.ignitetechnologies.in
After the configuration of the password, we try and log in for the first time in the neo4j service.
This requires us to rest the password as shown in the screenshot below.

www.hackingarticles.in 20 www.ignitetechnologies.in
After resetting the password and connecting to the neo4j service that we configured on our
Windows device, we can access the service from our Web browser. The panel tells us that we
are connected successfully to the neo4j service.

Now that we have installed the SharpHound Ingestor and Neo4j service on our Windows
device, we are now left with the process of installing the BloodHound GUI. This is quite simple

www.hackingarticles.in 21 www.ignitetechnologies.in
as we have executable for the same. We use the Windows Command Prompt to run the GUI as
shown in the image below.
Download BloodHound GUI Windows
dir
BloodHound.exe

The BloodHound GUI gets executed and we have ourselves a Login panel as shown in the image
below. We use the credentials that we set up in the Neo4j Configuration to login into
BloodHound GUI.

www.hackingarticles.in 22 www.ignitetechnologies.in
Enumerating with BloodHound
From here onwards the process of analyzing and enumerating on BloodHound is the same as
we discussed above. Using this set of instructions has made you able to run BloodHound on a
Windows device.

www.hackingarticles.in 23 www.ignitetechnologies.in
SharpHound on PowerShell
As an extension to the BloodHound Enumeration process on Windows, we also want to
demonstrate the process which can be followed by Security professionals when they want to
use the SharpHound on Windows through PowerShell. This can be done as we have the
PowerShell scripts for the SharpHound Ingestor. After bypassing the script restriction on
PowerShell, we import the modules from the SharpHound PowerShell script. It contains a
cmdlet by the name of Invoke BloodHound. This can be used to collect data on the target
machine. This is useful in the scenario where it is not possible to run an executable on the
target machine.
Download SharpHound PowerShell Script
powershell -ep bypass
Import-Module .\SharpHound.ps1
Invoke-BloodHound -CollectMethod All

www.hackingarticles.in 24 www.ignitetechnologies.in
SharpHound on PowerShell Empire
The SharpHound script that we used previously on PowerShell can be found inside the Kali
Linux as well. It is located inside the PowerShell Empire. After successfully gaining the initial
foothold on a device that is part of a Domain, the attacker can directly use the Empire to run
SharpHound and extract the data from there as well. To do this we need to use the bloodhound
module in the Empire’s Situational Awareness Modules. After execution, it tells the attacker the
location at which the data csv files are located at.
usemodule situtationa_awareness/network/bloodhound
execute

www.hackingarticles.in 25 www.ignitetechnologies.in
An attacker can use the download command on PowerShell Empire to transfer the csv files to
the host machine i.e., Kali Linux. We can use the multiple csv files in a similar way that we used
the json files earlier to plot graphs and enumerate an Active Directory.
ls
download group_memberships.csv
download local_admins.csv
download trusts.csv
download user_sessions.csv

www.hackingarticles.in 26 www.ignitetechnologies.in
Conclusion
This guide was created by us so that Security Professionals irrespective of the Red Team or Blue
Team can deploy, configure and use BloodHound to Enumerate on Active Directory
Deployments. It is a very useful tool that can be used to understand the mechanics of an Active
Directory Network and then use that information to elevate the privileges or exploit the
network.

www.hackingarticles.in 27 www.ignitetechnologies.in

You might also like