Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Pipe Friction Loss Spreadsheet - Hazen Williams Apr17

    Uploaded by

    saham cuan
    The document discusses head loss and flow velocity in high density polyethylene pipes. It provides the Hazen-Williams formula used to develop friction loss tables for different pipe sizes. The tables show flow rates, velocities, and pressure losses for various pipe diameters. Velocities over 5 feet per second should be used with caution, and joints can contribute greatly to pressure losses.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Pipe Friction Loss Spreadsheet - Hazen Williams Apr17

    Uploaded by

    saham cuan
    39 views4 pages
    The document discusses head loss and flow velocity in high density polyethylene pipes. It provides the Hazen-Williams formula used to develop friction loss tables for different pipe sizes. The tables show flow rates, velocities, and pressure losses for various pipe diameters. Velocities over 5 feet per second should be used with caution, and joints can contribute greatly to pressure losses.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses head loss and flow velocity in high density polyethylene pipes. It provides the Hazen-Williams formula used to develop friction loss tables for different pipe sizes. The tables show flow rates, velocities, and pressure losses for various pipe diameters. Velocities over 5 feet per second should be used with caution, and joints can contribute greatly to pressure losses.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    39 views4 pages

    Pipe Friction Loss Spreadsheet - Hazen Williams Apr17

    Uploaded by

    saham cuan
    The document discusses head loss and flow velocity in high density polyethylene pipes. It provides the Hazen-Williams formula used to develop friction loss tables for different pipe sizes. The tables show flow rates, velocities, and pressure losses for various pipe diameters. Velocities over 5 feet per second should be used with caution, and joints can contribute greatly to pressure losses.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    THE PIPE FRICITON LOSS TABLES FOR HIGH DENSITY POLYETHYLENE PIPE WERE DEVELOPED USING THE

    HAZEN - WILLIAMS FORMULA:

    Hf = 0.2083(100/C)1.852(Q1.852/d4.866)

    V = 0.408Q/d2

    Where: V = flow velocity in feet per second (ft/sec)


    Q = flowrate in gallons per minute (gpm)
    d = inside diameter of pipe in inches
    Hf = head loss due to friction in feet converted to equivalent pounds per square inch loss
    per 100 feet of straight pipe.
    C = Hazen Williams coefficient (150 for PVC & HDPE, 140 for PE, 100 for Steel)

    1. The spreadsheet can be used for pipes for other diameters or class (pressure) ratings not shown in the PIA Stockwater Hand
    2. The tab below labeled 'BLANK' can be used to compute headloss and velocities by entering pipe
    specifics at the top of the page and then entering the Nominal Size, OD, and ID in the green cells.
    3. The C value for the selected pipe can also be entered in the green cell.
    4. Changing the flowrate value in column A will compute new results.
    5. Velocities over 5 feet per second USE WITH CAUTION.

    6. Joints and other fittings can contribute greatly to pressure loss. Of particular concern is insert barbed fittings for HDPE - the
    represent a sudden contraction and expansion and reduce the flow cross section from that of the pipe. Best practice is to butt
    weld HDPE at joints.
    wn in the PIA Stockwater Handbook

    barbed fittings for HDPE - they


    e pipe. Best practice is to butt
    PROJECT:
    SIZE & KIND OF PIPE:

    c= 150 ASTM
    =================================================================================
    Size 1.000 2.000 3.000 4.000
    O.D. (in.)
    I.D. (in.) 1.000 2.000 3.000 1.278
    Area (sq.in.) 0.785 3.142 7.069 1.283
    =================================================================================
    Q (gpm) V (fps) PSI Loss V (fps) PSI Loss V(fps) PSI Loss V(fps) PSI Loss
    1 0.41 0.04 0.10 0.00 0.05 0.00 0.25 0.01
    2 0.82 0.15 0.20 0.01 0.09 0.00 0.50 0.05
    3 1.22 0.33 0.31 0.01 0.14 0.00 0.75 0.10
    4 1.63 0.55 0.41 0.02 0.18 0.00 1.00 0.17
    5 2.04 0.84 0.51 0.03 0.23 0.00 1.25 0.25
    6 2.45 1.18 0.61 0.04 0.27 0.01 1.50 0.36
    7 2.86 1.56 0.71 0.05 0.32 0.01 1.75 0.47
    8 3.26 2.00 0.82 0.07 0.36 0.01 2.00 0.61
    9 3.67 2.49 0.92 0.09 0.41 0.01 2.25 0.75
    10 4.08 3.03 1.02 0.10 0.45 0.01 2.50 0.92
    11 4.49 3.61 1.12 0.12 0.50 0.02 2.75 1.09
    12 4.90 4.24 1.22 0.15 0.54 0.02 3.00 1.29
    13 5.30 4.92 1.33 0.17 0.59 0.02 3.25 1.49
    14 5.71 5.64 1.43 0.19 0.63 0.03 3.50 1.71
    15 6.12 6.41 1.53 0.22 0.68 0.03 3.75 1.94
    16 6.53 7.23 1.63 0.25 0.73 0.03 4.00 2.19
    17 6.94 8.09 1.73 0.28 0.77 0.04 4.25 2.45
    18 7.34 8.99 1.84 0.31 0.82 0.04 4.50 2.72
    19 7.75 9.94 1.94 0.34 0.86 0.05 4.75 3.01
    20 8.16 10.93 2.04 0.37 0.91 0.05 5.00 3.31
    21 8.57 11.96 2.14 0.41 0.95 0.06 5.25 3.63
    22 8.98 13.04 2.24 0.45 1.00 0.06 5.50 3.95
    23 9.38 14.15 2.35 0.49 1.04 0.07 5.75 4.29
    24 9.79 15.31 2.45 0.53 1.09 0.07 6.00 4.64
    25 10.20 16.52 2.55 0.57 1.13 0.08 6.25 5.01
    26 10.61 17.76 2.65 0.61 1.18 0.08 6.49 5.38
    27 11.02 19.05 2.75 0.65 1.22 0.09 6.74 5.77
    28 11.42 20.37 2.86 0.70 1.27 0.10 6.99 6.18
    29 11.83 21.74 2.96 0.75 1.31 0.10 7.24 6.59
    30 12.24 23.15 3.06 0.79 1.36 0.11 7.49 7.02
    31 12.65 24.60 3.16 0.84 1.41 0.12 7.74 7.46
    32 13.06 26.09 3.26 0.89 1.45 0.12 7.99 7.91
    33 13.46 27.62 3.37 0.95 1.50 0.13 8.24 8.37
    34 13.87 29.19 3.47 1.00 1.54 0.14 8.49 8.85
    35 14.28 30.80 3.57 1.06 1.59 0.15 8.74 9.34
    Note: For velocities over 5 feet/sec, USE WITH CAUTION.

    You might also like