HF 690 Series: in Line Medium Pressure Filters

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

In line medium pressure filters

HF 690 series
HF 690

TECHNICAL CHARACTERISTICS

HF 690 filter series are connected to the pressure line of the circuit and protect the system’s components against conta-
minant particles.
The standard filters are supplied with by-pass valve set at 87 psi (6 bar).

l Maximum working pressure 1595 psi (110 bar)


l Flow up to 23.8 US gpm (90 l/min)
l Aluminum head and bowl

MATERIALS ENDURANCE STRENGHT


Head Anodized aluminum > 800.000 cycles
Bowl Anodized aluminum 0 ¸ 1595 psi (0 ¸ 110 bar)

Seals Buna - Viton


End cap Zinc plated steel DEGREE OF FILTRATION
Inner tube Zinc plated steel Absolute Filtration
Inorganic micro-fibre glas Multi-pass test conforming to ISO 16889 (regulation in force)
Filter media Contaminant ISO MTD
Reiforced cellulose
Code Degree of Ratio Percentage of
filtration ß x(c) efficiency
FLUID COMPATIBILITY FG003 5 mm ß 5(c) ³ 200 99,5 %
Conforming to ISO 2943 (Norm ISO 6743/4)
FG006 7 mm ß 7(c) ³ 200 99,5 %
Oil mineral (1) HH - HL - HM - HR - HV - HG
FG010 10 mm ß 10(c) ³ 200 99,5 %
Water emulsion (1) HFAE - HFAS
Synthetic fluid (2) HS - HFDR - HFDU - HFDS
FG025 21 mm ß 21(c) ³ 200 99,5 %

(1) With Buna seals


Multi-pass test conforming to ISO 4572 (previous regulation)
(2) With Viton seals Contaminant ACFTD
Code Degree of Ratio Percentage of
filtration ßx efficiency
FLOW
Flow max. 23.8 US gpm (90 l/min)
FG003 3 mm ß 3 ³ 200 99,5 %
FG006 6 mm ß 6 ³ 200 99,5 %

PRESSURE FG010 10 mm ß 10 ³ 200 99,5 %

Working pressure 1595 psi (110 bar) FG025 25 mm ß 25 ³ 200 99,5 %

Testing pressure 2321 psi (160 bar)


Burst pressure 4351 psi (300 bar)
Nominal Filtration
Element collapse pressure 290 psi (20 bar) Code Degree of filtration
rating (conforming to ISO 2941)
01/03.2011

RP010 10 mm
RP025 25 mm
BY-PASS VALVE
By-pass setting 87 psi (6 bar)
INDICATORS
Visual differential indicator
OPERATING TEMPERATURE
Visual electrical differential indicator
With Buna seals -30 ¸ 90 °C
With Viton seals -20 ¸ 110 °C

1 002 ICAT020-002
HF 690

HF 690 DIMENSIONS

Elements HE K85

With indicator “J” With indicator “T”


01/03.2011

Weight A B
Filter type kg (lbs) mm (in) mm (in)
HF 690-10.090 1,0 (2.20) 158 (6.2204) 77 (3.0315)
HF 690-10.179 1,3 (2.87) 247 (9.7244) 166 (6.5354)

Filtering Dirt holding capacity (ISO MTD) Dp = 72.5 psi (5 bar)


Element type C surface FG003 FG006 FG010 FG025
mm (in) cm 2 (in 2 ) gr (lbs) gr (lbs) gr (lbs) gr (lbs)
HE K85-10.090 90 (3.5433) 405 (66.7751) 2,2 (0.0049) 2,9 (0.0064) 3,2 (0.0071) 4,7 (0.0104)
HE K85-10.179 179 (7.0472) 845 (130.9753) 4,7 (0.0104) 6,1 (0.0134) 6,8 (0.0150) 9,8 (0.0216)

ICAT020-002 002 2
HF 690

COMPLETE FILTER'S PRESSURE DROP

HF 690-10.090 HF 690-10.179
3.0 3.0
(43.5) (43.5)

03
06

010

RP 10
0
RP 5
5
FG00

01

00

01
02
02

25 25
FG0

0
FG0

FG
RP

FG
FG

FG

P0 0
2.5 2.5

R FG
(36.3) (36.3)

2.0 2.0
(29.0) (29.0)

1.5 1.5
(21.8) (21.8)

1.0 1.0
(14.5) (14.5)

0.5 0.5
(7.3) (7.3)

0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
(2.6) (5.3) (7.9) (10.6) (13.2) (15.9) (18.5) (21.1) (23.8) (26.4) (2.6) (5.3) (7.9) (10.6) (13.2) (15.9) (18.5) (21.1) (23.8) (26.4)
Q [l/min] - [(US gpm)] Q [l/min] - [(US gpm)]
3
The curves are obtained in the following conditions: mineral oil type SAE 10, kinematic viscosity 120 SSU (30 cSt), density 7.29 lb/gal (0,856 kg/dm ).

FLOW
Degree of filtration
FG003 FG006 FG010 FG025 RP010 RP025
Flow Dp= 29 psi (2 bar)
Filter type
US gpm (l/min)
HF 690-10.090 5.3 (20) 9.2 (35) 11.9 (45) 15.9 (60) 13.2 (50) 17.2 (65)

HF 690-10.179 9.2 (35) 14.5 (55) 18.5 (70) 22.5 (85) 19.8 (75) 23.8 (90)

HOW TO ORDER A COMPLETE FILTER


1 2 3 4 5 6 7 8 9

HF 690 - 10.179 - AS - FG010 - LC - B60 - GD - B - XA - G

1 Filter type CODE 4 Dp collapse pressure CODE 7 Seals CODE


See table pag. 2 HF 690-. 290 [psi] (20 [bar]) LC Buna B
Viton V

Edition: 01/03.2011
2 Filtering surface CODE 5 By-pass valve CODE
Standard AS WithBy-pass settingvalve87[psi](6[bar]) B60 8 Indicator arrangement CODE
Without B00 Arranged XA
3 Degree of filtration CODE
3 [mm] Micro-fibre glass FG003 6 Ports IN/OUT CODE 9 Indicators CODE
6 [mm] Micro-fibre glass FG006 Threads GAS (BSPP) Without indicator, with plug G
10 [mm] Micro-fibre glass FG010 G 1/2 GD Visual differential indicator J
25 [mm] Micro-fibre glass FG025 On request metric threads, NPT or SAE Visual electrical differential indicator T
J514b are available.
10 [mm] Reinforced cellulose RP010
25 [mm] Reinforced cellulose RP025 Standard On request
HF 690 01 TA

HOW TO ORDER A REPLACEMENT ELEMENT


1 2 3 4 5

HE K85 - 10.179 - AS - FG010 - LC - B


1 Filter type CODE 3 Degree of filtration CODE 4 Dp collapse pressure CODE
See table pag. 2 HE K85-. 3 [mm] Micro-fibre glass FG003 290 [psi] (20 [bar]) LC
CODE 6 [mm] Micro-fibre glass FG006 CODE
2 Filtering surface 5 Seals
10 [mm] Micro-fibre glass FG010
Standard AS Buna B
25 [mm] Micro-fibre glass FG025 Viton V
10 [mm] Reinforced cellulose RP010
25 [mm] Reinforced cellulose RP025 Standard On request

3 002 ICAT020-003

You might also like