Handout 1 - RESEARCH PROPOSAL OUTLINE
Handout 1 - RESEARCH PROPOSAL OUTLINE
Handout 1 - RESEARCH PROPOSAL OUTLINE
Cover Page
Table of Contents
Chapter 1 - Introduction
(Need for the Study, Justification)
Problem Statement
Objectives/Research Questions/Hypotheses
Definition of Terms
Limitations of the Study
Basic Assumptions
Chapter 2 - Review of Literature
(Can have sections deemed necessary)
Chapter 3 - Procedures
Research Design
Subject Selection
Outcome Measures
Conditions of Testing
Treatments
Data Analysis
*plus
** Chapter 4 presentation should follow the same sequence and topics as that presented in
Chapter 3. **
Chapter 4 - Results
Findings Relative to problem
Summary of Data
Tests of Significance
Chapter 5 - Discussion
*Bibliography/ References
Appendices
ELEMENTS OF RESEARCH PROPOSAL
Cover Page
Follow the style prescribed by the style manual suggested by the university, department
or adviser.
Title - Should contain key words or phrases to give a clear and concise description of
the scope and nature of the report, and key words should allow bibliographers to
index the study in proper categories (Van Dalen, 1979:406).
- Indicate major variables
- Indicate nature of research
* descriptive
* correlational
* experimental
- Indicate target population
- Avoid words like:
"A Study of........”
"An Investigation of ........”
"A Survey of ........”
- Example dissertation title:
"A Process for Determining Vocational Competencies for the Performance
of Essential Activities for the Sales Function by Sales Personnel in the
Feed Industry and the Loci in Which the Competencies Could Be Taught.”
Journal article title for the above:
"What Does It Take To Sell Feed?”
Table of Contents
Chapter 1 - Introduction
- Provide reader with necessary background and setting to put the problem in proper
context.
- Lets the reader see the basis for the study.
- Justifies and convinces the reader that the study is needed.
- Be factual--statements, opinions and points of view should be documented.
- Provide a logical lead-in to a clear and concise statement of the problem.
- Your "sales pitch.”
- In a proposal for funding, address capabilities and capacity of individuals and
agency/institution in this section.
Definition of Terms
- Define terms in the context where they will be used - provide operational definitions
as well as constitutive definitions.
- Include a list of definitions for terms and concepts that have significant meaning for
the study.
- Constructed in listing form - like a dictionary, not prose form
- Do not define generally understood concepts, principles and concerns, e.g.,
vocational education, secondary education, adult education.
- Much of the specific information about the terms will be presented in other
appropriate sections of the proposal
Basic Assumptions
- These arguments can be presented in the "Background and Setting” section. This
does not need to be a special section.
- Knowledge relating to the theory that .......
- New products, e.g., instrument, instructional material, etc.
- Who (what individuals or groups) can use this new knowledge or information yielded
by the research to change or improve the present situation? How will the study
contribute to the improvement of the profession?
- Indicate how the results can be generalized beyond the bounds of study
- Can use the arguments of others (expert opinion) who call for an investigation of the
problem (properly documented, of course).
- Can use conflict in findings of related research as justification for the study. Be sure
it is documented in Review of Literature.
- Use if, then (hypothetical-deductive) logic
B. Indicates the theory on which the study is based; critique and weigh studies as theory
is built. (Teeter-totter example)
Chapter 3 - Procedures
REPLICATION is the key word to keep in mind when writing this chapter. Researchers
must provide accurate, detailed descriptions of how the research was done so it could be
replicated (redone) by others. You should provide explanations that will enable the reader to
reproduce the exact conditions of the original study. A rather extensive explanation should be
provided so that readers understand why and how you are going to do the research (in a final
report). Your procedures should answer questions or test hypotheses as efficiently,
economically and validly as possible.
SECTIONS
Research Design
Describe the type of research to be conducted, i.e., survey, ex post facto, quasi-
experimental, etc. This section is utilized to describe how you will set up your study to
observe the hypothesized relationship. Describe the steps you will take to address the
hypotheses in operational terms.
Describe what intervening variables might affect the dependent variable(s) other than
the independent variable, i.e.:
- Analyze the internal validity of the study (discussed later in the course)
- Also, discuss threats to external validity (discussed later in the course)
- Describe how your study will measure or control these threats given the "Limitations
of the Study.”
The description of the design for descriptive studies is generally easy to describe,
while the validity is not. Describe non-respondent follow-up procedures and procedures
to compare respondents with non-respondents.
A study may involve more than one purpose. Clearly indicate which design is to
address each objective.
The description of the research design for correlational or ex post facto research is
easy to describe, but particular attention must be directed to alternative or rival
explanations (intervening variables).
The research design for experimental and quasi-experimental research is often quoted
directly from Campbell and Stanley (or others) and analyzed by their threats to validity.
Schematic (graphic) diagrams often aid in understanding the design. Define the
symbols you use.
Subject Selection
The population to be studied is first identified and how a sampling fame (list of
elements in the population) will be developed. Is there frame error? Explain why this
population is appropriate for this study. Note any discrepancies between e experimentally
accessible population and the target population.
The sampling procedure is described. Relate how the sample was selected and your
reasons for selecting any stratifying variables, if they were employed. Describe the
sampling plan.
Describe the size of the sample, and how it was determined and the rationale for the
size. Sampling units should be identified.
Data describing the characteristics of the subjects that are relevant to the study
should be provided; and, if available, data from the population to enable the reader to
judge the representativeness of the sample.
Describe what will be done with subjects that decline to participate, drop out, or do
not participate in all parts of the study. What will be done about non-respondents? What
will be done about non-residents? What will be done about incomplete questionnaires or
ones with obvious response sets, lying, cheating or unanswered items? All affect the
population to whom one can generalize the results, i.e., the external validity of the study.
Outcome Measures
Measurement of the dependent variable(s) is one key to your study. Instruments are
operational definitive for variables. Techniques or instruments used to measure the
dependent variable(s), outcome, must be carefully described in terms of:
If well-known instruments are used, one can generally briefly describe them, and their
reliability and validity, and refer the reader through citation to references where more
thorough detailed discussions can be found.
If the researcher is developing the instrumentation, then validity and reliability must
be established. The instrument should be pilot and/or field tested. The researcher should
describe how this was done. A field test can locate potential suitability problem areas.
Appendix copies of the instruments to the proposal.
The Review of Literature can be utilized to verify the concepts/theory under study and
the scope of the measurement methods to assess the concepts. This section should
establish the operational link between these concepts/theory and the measurement.
If you use interviewers or observers, how were they trained? What were their inter-
rater and intra-rater reliabilities?
Conditions of Testing
Describe when, where and under what conditions the data were gathered, the number
of times and order in which instruments were used, and the time allotted for the data
collection.
Describe the verbal and written directions provided to the subjects. Were incentives
used to encourage response?
Be specific! When you describe when, taking a test after lunch, after another test,
etc., may explain variance more than the quarter or date.
During the actual data gathering, testing, monitor events so they can be explained to
the reader.
If instruments are potentially reactive, what precautions will be taken to minimize this
threat.
Treatments
How were the independent variables administered? What was done to the subjects?
Describe all levels so that they are replicable. Were any methods employed and
abandoned because they were valueless?
Kerlinger describes maximizing the differences between the levels of the independent
variable. A typical shortcoming is comparing a "new” methods with a "traditional” or
"conventional” method of doing something, and the researcher describes at length the
"new” method but not the "traditional” method. How, really, are they different?
If attribute variables are used in the design, identify them and the number of levels of
each and briefly describe the rationale for the selection of the attribute variables (more
thorough explanation should be in the "Review”).
Data Analysis
Statistical techniques are tools selected because of your design, not vice versa.
Descriptive and inferential analyses are provided to address each facet of the
hypothesis, null hypothesis, objective or problem. Have foresight! What is the easiest
way to collect, code and analyze your data?
Why were these methods of analysis employed? Why was this level of significance
selected?
For each statistical method used, present evidence indicating that the basic
assumption underlying its use have been met. For example, a Pearson Product Moment
Correlation (r) assumes both linearity and homoscedasticity, so you would always need to
construct a scatterplot whenever you use r to show these assumptions are met. Statistics
courses provide you with these skills and understandings.
Remember, select statistics that answer the question(s) involved with the study. They
serve research, not dominate it. Nothing is gained in using complicated statistics that
happen to be in "vogue” if simple ones will do just as well. Specify what analysis will be
used for each objective.
Proposals submitted for Agr Educ 885 do not have to have the Data Analysis section
complete. Agr Educ 887 will approach this topic in more detail.