Sip 3102 Manual

NBX Business Telephone
Guide
NBX Networked Telephony Solutions

System Release 5.0
Part Number 900-0210-01

Published April 2005
http://www.3com.com/
Downloaded from www.Manualslib.com manuals search engine

3Com Corporation Copyright © 1998–2005, 3Com Corporation. All Rights Reserved. No part of this documentation may be
350 Campus Drive reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from 3Com Corporation.
Marlborough, MA
01752-3064 3Com Corporation reserves the right to revise this documentation and to make changes in content from
time to time without obligation on the part of 3Com Corporation to provide notification of such revision
or change.
3Com Corporation provides this documentation without warranty, term, or condition of any kind, either
implied or expressed, including, but not limited to, the implied warranties, terms, or conditions of
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements
or changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a
license agreement included with the product as a separate document, in the hardcopy documentation, or
on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to
locate a copy, please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGENDS:
If you are a United States government agency, then this documentation and the software described herein
are provided to you subject to the following:
United States Government Legend: All technical data and computer software is commercial in nature
and developed solely at private expense. Software is delivered as Commercial Computer Software as
defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as
such is provided with only such rights as are provided in 3Com’s standard commercial license for the
Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov
1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any
portion of any legend provided on any licensed program or documentation contained in, or delivered to
you in conjunction with guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or
may not be registered in other countries.
3Com, the 3Com logo, and NBX are registered trademarks of 3Com Corporation. NBX NetSet and pcXset
are trademarks of 3Com Corporation.
Other brand and product names may be registered trademarks or trademarks of their respective holders.

CONTENTS
ABOUT THIS GUIDE

How to Use This Guide 10
Conventions 10
Documentation 11
Comments on the Documentation 12
1 GETTING STARTED
Setting Up Your Password and Voice Mail for the First Time 13
NBX NetSet Utility 15
Starting the NBX NetSet Utility 16
Navigation and Shortcut Icons in the NBX NetSet Utility 16
Quick Reference Guides 17
2 3COM 3102 BUSINESS TELEPHONE

Telephone Buttons and Controls 19
Programmable Access Buttons 22
Status Lights for System Appearance Buttons 24
3 3COM 1102, 2102, AND 2102-IR BUSINESS TELEPHONES

Status Lights for System Appearance Buttons 30
4 NBX MESSAGING
NBX Messaging Components 31
Important Considerations 32
Changing Your Password 32
Security Tips 33
Changing Your Name Announcement and Personal Greetings 33

4
Listening to NBX Messages 34

Message Indicators 34
Listening from Your Computer 35
Listening from Your 3Com Telephone 35
Listening from Any Internal 3Com Telephone 35
Listening from an External Location 35
Managing Your Messages 36
Information About Your Messages 37
Replying to a Message 37
Forwarding a Message 38
Creating and Sending a Message 39
Using Voice Mail Group Lists 40
Viewing System Groups 40
Creating Personal Groups 40
Modifying or Deleting Personal Groups 41
Marking a Message as Private or Urgent 43
Other Ways to Manage Your Voice Mail Messages 44
Other Kinds of Mailboxes 44
Greeting-Only Mailbox 44
Phantom Mailbox 45
Group Mailbox 45
5 STANDARD FEATURES
Answering a Call 47
Caller ID 48
Answering a Second Call 48
Using the 3Com Telephone Display Panel 48
Tips on Using the Lists 49
Dialing a Call 50
An Internal Call 50
An External Call 50
Redialing a Call 50

5
Forwarding Incoming Calls 51

Call Coverage Points 51
Condition to Forward Calls 51
Setting Call Forward from the Telephone 51
Setting Call Forward from the NetSet Utility 54
Call Forward Precedence 56
Putting a Call on Hold 57
Dialing Another Call 57
More Than One Call 57
Transferring a Call 58
Announced (Screened) Transfer 58
Blind Transfer 58
Direct Mail Transfer 59
Establishing a Conference Call 59
Disconnecting the Last Person That You Called 60
More About Conference Calls 61
Setting the Volume 61
6 PERSONALIZING YOUR TELEPHONE

Guidelines About Features on NBX Telephones 63
Ringer Tones 64
Speed Dials 64
Personal Speed Dials 65
System-wide Speed Dials 66
Special Case: One-Touch Speed Dials 66
Printing Speed Dial Lists 67
Printing Labels 68
Off-Site Notification 68
Managing Off-site Notification Using the Telephone 72
Do Not Disturb 73
Preventing Unauthorized Use of Your Telephone 74
Telephone Locking 74
Call Permissions 75
Class of Service Override 75

6
Using a Headset 76
With the 3Com Manager’s Telephone and 3Com 3102 Business
Telephone 76
General Headset Instructions 76
Returning to the Headset After a Long Delay 77
Using Hands Free Active on Intercom 78
Palm Integration 78
7 GETTING MORE FROM YOUR TELEPHONE SYSTEM

Listening to Your Messages in Your E-mail 80
Account (Billing) Codes 80
Caller ID 81
Internal and External Caller ID 81
Calling Line Identity Restriction (CLIR) 82
Call Pickup 83
Directed Call Pickup on a Specific Telephone 83
Group Call Pickup 84
Automatic Call Distribution Groups, Hunt Groups, and Calling Groups 84
Automatic Call Distribution 85
Hunt Groups 87
Calling Groups 89
Group Membership 89
Supervisory Monitoring 90
Monitor 90
Whisper 91
Barge-In 92
Change Agent 92
Interactions 92
Call Park 93
Paging 94
Paging the System 95
Paging Zones 95
Configurable Operators 96
How Configurable Operators Work 96
Configuring the Operators 97

7
Using Message Waiting Indicator to Telephone 98

Sending an MWI Message 98
Retrieving an MWI Message 98
Deleting MWI Messages 99
Cancelling an MWI Message 99
Dialing a Call to a Remote Office 100
Using Unique Extensions 100
Using Site Codes 101
Bridged Extensions 102
Delayed Ringing 103
Using Pulse Dialing 103
Additional Applications 105
8 FEATURE CODES
NBX Tones 107
Feature Codes with 3Com Telephones 108
3Com Business Telephone 109
Using Feature Codes 109
9 3COM 3105 AND 1105 ATTENDANT CONSOLES

3Com Attendant Console 114
Access Buttons 114
Feature Buttons 114
Attendant Console Labels 117
Opening the 3105 Attendant Console Label Cover 117
Complement Attendant Software 118
Managing Calls 119
A TELEPHONE INSTALLATION AND MAINTENANCE

Connecting the Telephone 121
Installing the 3102 Telephone Label Plate 123
Attaching and Adjusting the Articulating Support Bracket 123
Attaching and Adjusting the Fixed Support Bracket 125
Low-Profile and High-Profile Positions 125
Wall-Mount Position 126
Security Wall-Mount Bracket 127

8
Moving Your Telephone 128

Swapping Telephones 128
Cleaning Your Telephone 128
Troubleshooting Problems 128
INDEX

ABOUT THIS GUIDE
This guide is intended for anyone using:

■ 3Com® Business Telephones
■ 3Com Attendant Consoles
■ NBX Complement Attendant Software.
It includes information about using the NBX Voice Mail system and the
NBX NetSet™ administration utility for personal telephone settings.
Devices documented in this guide include:
■ Telephones
■ 3Com 3102 Business Telephone
■ 3Com 2102-IR Business Telephone
■ Attendant Consoles
■ 3Com 3105 Attendant Console
■ 3Com 1105 Attendant Console
■ NBX Complement Attendant Software
If the information in the release notes (readme.pdf) on the NBX Resource

Pack CD differs from the information in this guide, follow the instructions
in the release notes.
Analog telephones connected through the Analog Terminal Card or the

Analog Terminal Adapter can use most of the features described in this
book. See the NBX Feature Codes Guide for Analog Telephones in the
NBX NetSet utility.

10 ABOUT THIS GUIDE
How to Use Table 1 shows where to look for specific information in this guide.
This Guide
Table 1 Where to Find Information
If you are looking for information about Turn to

How to get started with your new telephone Chapter 1
The 3Com 3102 Business Telephone Chapter 2
The 3Com 1102, 2102, and 2102-IR Business Telephones Chapter 3
NBX Voice Messaging features Chapter 4
Using standard telephone features Chapter 5
Personalizing your telephone Chapter 6
Enhanced system features Chapter 7
Feature codes Chapter 8
The Attendant Console and Complement Attendant Software Chapter 9
Telephone maintenance and troubleshooting information Appendix A
References to all topics in this book Index
Conventions Table 2 defines some commonly used words and phrases in this guide.
Table 2 Common Terms
Term Definition
Auto Attendant The set of voice prompts that answers incoming calls and
describes actions that a caller or user can take to access
individual services.
Administrator The person who is responsible for maintaining your
3Com Networked Telephony Solution.
Receptionist The person who answers the majority of incoming
telephone calls. In some business environments, this
person may be a switchboard operator.
User A person who has a single 3Com Telephone or an
analog telephone connected to the NBX system through
an ATC card or the single-port ATA device.

Documentation 11
Table 3 lists conventions that are used throughout this guide.

Table 3 Icons
Icon Type Description

Information note Information that describes important features
or instructions.
Caution Information that alerts you to potential loss of
data or potential damage to an application,
system, device, or network.
Warning Information that alerts you to potential
personal injury.
Documentation The documentation set for 3Com NBX Networked Telephony Solutions is
designed to help NBX telephone users, installers, and administrators
maximize the full potential of the system.
The NBX Resource Pack CD contains many guides to the NBX products
and their related 3Com applications.
When you log in to the NBX NetSet utility as a user, you can view the PDF
versions of the NBX Telephone Guides and NBX Feature Codes Guide by
clicking the icons at the bottom of the screen. You can view the Quick
Reference Guide for your telephone by clicking the Telephone Quick
Reference button.
The NBX NetSet utility also includes a searchable Help system with Help
buttons on each screen.
An administrator who logs in can also see the NBX Installation Guide and
the NBX Administrator’s Guide.

12 ABOUT THIS GUIDE
Comments on the Your suggestions are important to us. They help us to make the NBX
Documentation documentation more useful to you.
Please send your e-mail comments about this guide or any of the
3Com NBX documentation and Help systems to:
[email protected]
Include the following information with your comments:

■ Document title
■ Document part number (found on the front or back page)
■ Page number
As always, please address all questions regarding the NBX hardware and
software to your 3Com NBX Voice-Authorized Partner.

GETTING STARTED
1
As soon as you are given a telephone and extension number, you need to
set up a password and record your name announcement and personal
greeting.
This chapter covers these topics:

■ Setting Up Your Password and Voice Mail for the First Time
■ NBX NetSet Utility
■ Quick Reference Guides
For how to access NBX® features from an analog telephone, set your
password as described next and then see the NBX Feature Codes Guide in
the NBX NetSet™ utility.
Setting Up Your The procedure by which you set up your password and voice mailbox for
Password and the first time depends on:
Voice Mail ■ The kind of telephone that you have
for the First Time
■ The kind of voice messaging system on your NBX system. Ask your
administrator what kind of voice messaging is active on your system.
Table 4 describes how to set up your first password.
For details on tones and feature codes, see Chapter 8. For details on
tones and feature codes on analog telephones, see the NBX Feature
Codes Guide in the NBX NetSet utility.

14 CHAPTER 1: GETTING STARTED
Table 4 Setting Your NBX NetSet Utility and NBX Messaging Password
Feature 3Com Phones Analog Telephones

Password — Set Initially
If your system uses NBX Message button and 500 ** and follow the
Messaging, follow the NBX voice follow the voice prompts voice prompts
prompts to set your NBX password
(which is the same for the NBX NetSet
utility and voice messaging) OR use
OR, for systems that do OR, for systems that do
the NBX NetSet utility, described next.
not use NBX Messaging: not use NBX Messaging:
If your system uses a voice
Feature #
messaging application other than
+ 434 (Feature Entry Tone)
NBX Messaging, use this code
+ new password + 434
sequence to set your password for
+# (Feature Entry Tone)
the NBX NetSet utility. 3Com
+ repeat your new + new password
recommends that you use the same
password +#
password for the NBX NetSet utility
and your messaging application.
+ repeat your new
For all voice messaging systems: password
+#
■ Use only 4- to 10-digit numbers
(Confirmation Tone)
■ Do not use letters, *, or # as part
of your password.
Password — Change
If your system uses NBX Message button 500 **
Messaging, follow the NBX voice + current password + extension number
prompts to change your NBX +# + current password
password (which changes your NBX +9 +#
NetSet utility password, because they +2 +9
are the same) OR use the NBX NetSet + follow the prompts +2
utility, described next. + follow the prompts
If your system uses a voice
messaging application other than OR, for systems that do OR, for systems that do
NBX Messaging, use this code not use NBX Messaging: not use NBX Messaging:
sequence to change your password
Feature #
for the NBX NetSet utility. 3Com
+ 434 (Feature Entry Tone)
recommends that you use the same
+ current password + 434
password for the NBX NetSet utility
and your voice messaging application.
+ new password + current password
For all voice messaging systems: +# +#
+ repeat your new (Feature Entry Tone)
■ If you forget your password, the
password + new password
administrator can reset it to your
+#
extension. Then use this code (for
(Feature Entry Tone)
applications other than NBX
+ repeat your new
Messaging) or the NBX voice
password
prompts to change it.
+#
(Confirmation Tone)

NBX NetSet Utility 15
After you have set your initial NBX password, continue to follow the voice
prompts to record your name announcement. Your name announcement
tells callers that they have reached your voice mailbox.
Then follow the voice prompts to record your personal greeting. Your
personal greeting lets callers know important information about you, for
instance, that you are on vacation, available at another number, or
unavailable for a specified amount of time.
At any time you can change these greetings or record more than one
personal greeting and choose which one is active. See “Changing Your
Name Announcement and Personal Greetings” in Chapter 4.
NBX NetSet Utility The NBX NetSet utility has two interfaces:
■ Administrator — Your administrator logs in with a special password
and uses the NBX NetSet utility to manage and configure system-wide
telephone settings and many of the settings for your telephone.
■ User — As a telephone user, you log in to the NBX NetSet utility with
your own system ID (your extension) and password to:
■ View and change your telephone’s personal settings, such as speed
dials, ringer tone, and specify where you want your calls to go
when you cannot answer them (your call coverage points).
■ Listen to and delete your voice messages from your computer as an
alternative to managing calls on your telephone.
■ View your call permissions, certain current feature settings, and the
internal user directory to call other users on your system.
■ Log in to and out of one or all ACD groups, hunt groups, and
calling groups of which your telephone is a member.
See Chapter 5, Chapter 6, and Chapter 7 for discussions about the

standard and enhanced features that you can monitor and change in the
NBX NetSet utility. See Chapter 4 for voice messaging features.
If your NBX system uses a messaging application other than NBX

Messaging, off-site notification and other voice messaging features are
available through your messaging application. See the application’s
documentation rather than using this Guide.

Starting the NBX To use the NBX NetSet utility, you need a computer that is connected to
NetSet Utility your local area network (LAN) and that has a web browser. (You do not
need Internet access.) To start the NBX NetSet utility:
1 Ask your administrator for the IP address (or DNS host name) for your
NBX system. In the web browser on your computer (Microsoft Internet
Explorer version 5.5 or later is optimal), enter the IP address (or DNS host
name) in the Address field, and then press Enter. The NBX NetSet utility
login screen appears.
You cannot log in to the NBX NetSet utility until you establish your
password through your telephone using NBX voice prompts or the
Feature Code sequence. See Table 4 earlier in this chapter.
2 Click User to log in as a user. The password dialog box appears.
3 Type your NBX NetSet utility user identification (always your 3-digit or
4-digit telephone extension) and your NBX NetSet utility password, and
then click OK.
Navigation and The icons at the lower right of any Personal Settings window allow you
Shortcut Icons or your administrator to navigate to the following features:
in the NBX NetSet
Utility Table 5 Navigation Icons
Icon Action Where You Go

Back ■ For the User goes to the main NBX NetSet utility login
dialog box
■ For the Administrator goes to the NBX NetSet utility main
menu window
Help Help for the fields and procedures related to the screen
Click the icons below the window to go directly to these features:

One-Touch Speed Dials
(not available on 3Com® 3100
Entry Telephone)
Off-Site Notification

Quick Reference Guides 17
Telephone Guides
(including this guide)
NBX Feature Codes Guide
Quick Reference To open and print a copy of the Quick Reference Guides for the most
Guides frequently used features on your telephone:
1 Log in to the NBX NetSet utility. See “Starting the NBX NetSet Utility”
earlier in this chapter.
2 Click Telephone Quick Reference. The quick reference guide that
pertains to your telephone appears. Adobe Acrobat Reader 5.0 or higher
is required to view the file. Adobe Acrobat Reader is available free from
the Adobe Web site:
www.adobe.com


3COM 3102
2 BUSINESS TELEPHONE
This chapter describes the buttons, controls, and features on the 3Com®
3102 Business Telephone. It covers these topics:
■ Telephone Buttons and Controls
■ Programmable Access Buttons
■ Status Lights for System Appearance Buttons
For how these features work on an analog telephone that is connected to

the NBX® system, click the NBX Feature Codes Guide icon below any
screen in the NBX NetSet™ utility.
Telephone Buttons Figure 1 shows the buttons and controls on the 3Com 3102 Business
and Controls Telephone. The features are discussed after the picture.

20 CHAPTER 2: 3COM 3102 BUSINESS TELEPHONE
Figure 1 3Com 3102 Business Telephone
1 Soft buttons — Allow you to select items that are displayed in the
telephone display panel. See “Using the 3Com Telephone Display Panel”
in Chapter 5. The buttons, from left to right, are:
■ Slct (Select)
■ Back (returns you to the next higher level in the menu)
■ Exit (leaves the display panel menus)
2 Message Waiting Indicator (MWI) — When lit, indicates that you have
one or more new voice mail messages in your voice mailbox. Also, this
indicator flashes when your telephone rings.
3 Display panel — Displays telephone status messages, Caller ID
information (if enabled), and the number of messages that you have in
your voice mail mailbox. You can also use it to view these items:
■ Logs of your recent missed, answered, and dialed calls
■ A directory of people’s names in your organization
■ Personal speed dial numbers

■ System-wide speed dial numbers

■ Call forward setting for all calls
4 Scroll buttons (Up, Down, Left, Right) — Allow you to scroll through
the items in the telephone display panel. See “Using the 3Com Telephone
Display Panel” in Chapter 5. The left and right buttons are reserved for
future use.
5 Program button — Reserved for future use.
6 Programmable Access buttons — Allow you and your administrator to
assign features to specific buttons. See “Programmable Access Buttons”
and “Status Lights for System Appearance Buttons” later in this chapter.
7 Microphone (located on the side of the telephone) — Activated
when the telephone is in speaker phone mode, that is, after you press the
Speaker button or the (Hands Free) button. For best results, keep the
area around the microphone free of obstructions.
8 Label area for Access buttons
9 Telephone key pad
10 Hold button — Places a caller on hold. See “Putting a Call on Hold” in
Chapter 5.
11 Transfer button — Sends the currently active call to another telephone.
See “Transferring a Call” in Chapter 5.
12 Conference button — Establishes a single call with up to three
additional internal parties, external parties, or both. See “Establishing a
Conference Call” in Chapter 5.
13 Redial button — Redials the last telephone number or extension that
you called. See “Redialing a Call” in Chapter 5.
14 Speaker button — Enables you to use the speaker phone feature. Press
the Speaker button before you dial the call, when your telephone is
ringing, or while a call is in progress. To turn the speaker phone off and
resume the conversation, pick up the handset.
15 Forward to Voice Mail button — Directs all incoming calls, after one
ring, to your voice mail or to wherever you have specified in NBX NetSet
> User Information > Call Forward. See “Other Ways to Manage Your
Voice Mail Messages” in Chapter 4.
16 Message button — Accesses your voice mail messages through the NBX
Messaging system. See “Listening to NBX Messages” in Chapter 4.

17 Hands Free button — Allows you to answer internal (intercom) calls

without picking up the handset. To activate this feature, press the
button before calls come in to your telephone. When the feature is
enabled, the indicator is lit. When you receive an internal call, your
telephone sounds a tone and activates the speaker phone.
An external call (a call from outside your NBX system) rings to your
telephone as usual.
18 Headset connector — Located on the underside of the telephone, this
RJ-11 connector enables you to plug in a headset so that you can listen to
calls and have your hands free. See “Using a Headset” in Chapter 6.
To enable the use of a connected headset, press the Headset button (by
default, button 16 at the top of the right column of buttons).
19 Volume down — Lowers the volume of the ringer, the speaker, the
handset, or the headset. See “Setting the Volume” in Chapter 5.
20 Mute button — Enables you to prevent callers from hearing what you
are saying during a telephone call, although you can still hear them. Press
the button to turn off the telephone’s microphone when you are
using the handset or headset, or when your telephone is in speaker
phone mode. To turn off the Mute feature, press the button again.
21 Volume up — Raises the volume of the ringer, the speaker, the handset,
or the headset. See “Setting the Volume” in Chapter 5.
22 Handset
Programmable Figure 2 shows the 18 programmable Access buttons on the 3Com 3102
Access Buttons Business Telephone. To view or change the current features on your
telephone’s buttons (button mappings), click the Shortcut to
One-Touch Speed Dials icon on any NBX NetSet utility screen. Click the
Help button for instructions.

Figure 2 3102 Access Buttons
Access buttons have these default settings, which your administrator can
change:
1 In most circumstances, your administrator designates these three system
appearance buttons as lines for incoming and outgoing calls.
2 Personal Speed Dial 1. See “Speed Dials” in Chapter 6.
3 Personal Speed Dial 2
5 Call Park button — Allows you to place a call in a “holding pattern” so
that it can be retrieved from any other telephone on the system. See
“Call Park” in Chapter 7.
6 Transfer to Voice Mail button — Sends a call directly to another user’s
voice mailbox. See “Direct Mail Transfer” in Chapter 7.
7 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. See Chapter 8 for a list
of features and codes and how to use them.
8 Release button — Disconnects calls. Useful when you use a telephone
headset. See “Using a Headset” in Chapter 6.
9 Personal Speed Dial 4. See “Speed Dials” in Chapter 6.


16 Headset — Press this button to enable the use of a headset that is
connected to the telephone.
Status Lights for An Access button that is set up for incoming and outgoing calls is called a
System Appearance System Appearance button. The light beside each System Appearance
Buttons button indicates the status:
If the light is The line is

Off Available for use
Steady In use
Blinking quickly Ringing
Blinking slowly On hold

3COM 1102, 2102,
3 AND 2102-IR BUSINESS
TELEPHONES
This chapter describes the buttons, controls, and features on the

following 3Com® Telephones:
■ 3Com 2102-IR Business Telephone
The chapter covers these topics:

■ Telephone Buttons and Controls
■ Programmable Access Buttons
■ Status Lights for System Appearance Buttons
For how these features work on an analog telephone that is connected to

the NBX® system, click the NBX Feature Codes Guide icon below any
screen in the NBX NetSet™ utility.
Telephone Buttons Figure 3 shows the buttons and controls on the 3Com 1102, 2102 and
and Controls 2102-IR Business Telephones.

26 CHAPTER 3: 3COM 1102, 2102, AND 2102-IR BUSINESS TELEPHONES
Figure 3 3Com Business Telephone (2102-IR Shown)
1 Display panel — Displays telephone status messages, Caller ID

information (if enabled), and the number of messages that you have in
your voice mail mailbox. You can also use it to view these items:
■ Logs of your recent missed, answered, and dialed calls
■ A directory of people’s names in your organization
■ Personal speed dial numbers
■ System-wide speed dial numbers
■ Call forward setting for all calls

2 Soft buttons — Allow you to select items that are displayed in the
telephone display panel. See “Using the 3Com Telephone Display Panel”
in Chapter 5.
The soft buttons, from left to right, are:
■ Slct (Select)
■ Back (returns you to the next higher level in the menu)
■ Exit (leaves the display panel menus)
3 Scroll buttons (Up, Down) — Allow you to scroll through the items in
the telephone display panel. See “Using the 3Com Telephone
Display Panel” in Chapter 5.
4 Program button — Reserved for future use.
5 Programmable Access buttons and label area — Allow you and your
administrator to assign features to specific buttons. See “Programmable
Access Buttons” and “Status Lights for System Appearance Buttons”
later in this chapter.
6 Programmable Access and label area — Allow you and your
administrator to assign features to specific buttons. See “Programmable
Access Buttons” later in this chapter.
Chapter 5.
8 Transfer button — Sends the currently active call to another telephone.
See “Transferring a Call” in Chapter 5.
9 Conference button — Establishes a single call with up to three
additional internal parties, external parties, or both. See “Establishing a
Conference Call” in Chapter 5.
10 Redial button — Redials the last telephone number or extension that
you called. See “Redialing a Call” in Chapter 5.
11 Speaker button — Enables you to use the speaker phone feature. Press
the Speaker button before you dial the call, when your telephone is
ringing, or while a call is in progress. To turn the speaker phone off and
resume the conversation, pick up the handset.
12 Volume up and down buttons — Raises and lowers the volume of the
ringer, the speaker, the handset, or the headset. See “Setting the
Volume” in Chapter 5.

13 Mute button — Enables you to prevent callers from hearing what you
are saying during a telephone call. Press the Mute button to turn off the
telephone’s microphone when you are using the handset or when your
telephone is in speaker phone mode. To turn off the Mute feature, press
the Mute button again.
14 Infrared Port (2102-IR only) — Receives infrared signals from a
hand-held device running the Palm Operating System. See “Palm
Integration” in Chapter 6.
15 Hands Free button — Allows you to answer internal (intercom) calls
without picking up the handset. To activate this feature, press the
Hands Free button before calls come in to your telephone. When this
feature is enabled, the indicator is lit. When you receive an internal call,
your telephone sounds a tone and activates the speaker phone.
telephone as usual.
16 Telephone key pad
17 MSG (Message) button — Accesses your voice mail messages through
the NBX Messaging system. See “Listening to NBX Messages” in
Chapter 4. The status light beside this button acts as a message waiting
indicator (you have one or more messages in your voice mailbox).
18 FWD MAIL (Forward to Voice Mail) button — Directs all incoming
calls to your voice mail (or to wherever you have specified in NetSet >
User Information > Call Forward Default) after one ring. See “Other
Ways to Manage Your Voice Mail Messages” in Chapter 4.
19 Handset
Programmable Figure 4 displays the 18 programmable Access buttons. The One-Touch

Access Buttons Speed Dials screen in the NBX NetSet utility shows your telephone’s
current button mappings.

Figure 4 Access Buttons on 3Com 1102, 2102, and 2102-IR Telephones
1 7
2
3
4
5
6
8
Access buttons have these default settings, which your administrator can
change:
1 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. See Chapter 8 for a list
of features and codes and how to use them.
2 Direct Mail Transfer button — Sends a call directly to another user’s
voice mailbox. See “Direct Mail Transfer” in Chapter 7.
3 Call Park button — Allows you to place a call in a “holding pattern” so
that it can be retrieved from any other telephone on the system. See
“Call Park” in Chapter 7.
4 Flash button (analog line only) — Toggles the current call to another
call if the line has the Call Waiting service from your local telephone
company, or enables call transfer if the line has the Call Transfer service.
5 Unassigned — This button has no default assigned function.
6 Release button — Disconnects calls. Useful when you use a telephone
headset. See “Using a Headset” in Chapter 6.
7 Typically, you can use these nine buttons for personal speed dial settings,
although the administrator can map them to other features. See “Speed
Dials” in Chapter 6.
8 In most circumstances, your administrator designates these three system
appearance buttons as lines for incoming and outgoing calls.

Status Lights for An Access button that is set up for incoming and outgoing calls is called a
System Appearance System Appearance button. The light beside each System Appearance
Buttons button indicates the status:

Steady In use

NBX MESSAGING
4
This chapter describes the NBX® Networked Telephony Solutions voice
messaging features. It covers these topics:
■ NBX Messaging Components
■ Changing Your Password
■ Changing Your Name Announcement and Personal Greetings
■ Listening to NBX Messages
■ Replying to a Message
■ Forwarding a Message
■ Creating and Sending a Message
■ Using Voice Mail Group Lists
■ Marking a Message as Private or Urgent
■ Other Ways to Manage Your Voice Mail Messages
■ Other Kinds of Mailboxes
NBX Messaging A key component of the NBX Networked Telephony Solutions is the
Components NBX Messaging system, which includes voice mail, off-site notification,
and several administrative features. Voice mail allows callers to leave voice
messages in your voice mailbox when you are not able to answer your
telephone. You can listen to, save, and forward those messages from any
touch-tone telephone.
If your system uses a messaging application other than NBX Messaging,

use the documentation for your messaging application instead of the
instructions in this chapter. Exception: Use the procedures in “Changing
Your Password” regardless of your messaging application.

32 CHAPTER 4: NBX MESSAGING
Important ■ The steps are the same for initially setting up the name
Considerations announcement, personal greetings, and passwords for personal,
greeting-only, and phantom mailboxes. See “Setting Up Your
Password and Voice Mail for the First Time” in Chapter 1 for details.
(Your administrator creates group mailboxes and their passwords.)
■ For changes to passwords and greetings, see “Changing Your
Password” and “Changing Your Name Announcement and Personal
Greetings” later in this chapter.
■ The default setting for the maximum length of each voice mail
message on the system is 5 minutes. Your administrator can configure
your organization’s NBX Messaging system to receive and store voice
mail messages that are up to 10 minutes long.
■ Use the Off-Site Notification feature if you want the NBX system to
notify you when callers leave voice mail messages in your voice
mailbox. See “Off-Site Notification” in Chapter 6.
■ With a touch-tone telephone, you are able to bypass system messages
using option buttons if you are configuring passwords and greetings.
However, you cannot bypass voice mail messages in this manner.
Changing Your You use the same 4-digit to 10-digit password to log in to the NBX
Password NetSet™ utility and to access your NBX voice mail. You can change this
password with your telephone (using the NBX voice prompts or a feature
code) or through the NBX NetSet utility.
To set up your password for the first time, see Table 4 and “NBX NetSet
Utility” in Chapter 1. Table 4 also describes how to change your
password.
If you forget your password, the administrator can set it to be your

extension number. Then follow the instructions in Table 4 in Chapter 1 to
change it to a more secure password. Also see “Security Tips” next.
If your NBX system uses a messaging system other than NBX Messaging:
■ Use the feature code method described in Table 4 in Chapter 1 to set
and change the NBX NetSet utility password.
■ 3Com recommends that you use the same password for your voice
messaging system and for the NBX NetSet utility.

Changing Your Name Announcement and Personal Greetings 33
Security Tips ■ Change your password often.

■ Do not use passwords that can easily identify you, such as your phone
extension or birth date.
■ Avoid simple passwords such as 1234 or 0000.
■ Use numbers only; do not use letters, *, or # as part of your password.
■ Longer passwords are more secure. You can use up to 10-digits for
your password.
■ Never tell your password to anyone.
Changing Your You set name announcement and personal greeting when you first set
Name your voice mail. See “Setting Up Your Password and Voice Mail
Announcement and for the First Time” in Chapter 1. Change your personal greeting often, to
Personal Greetings ensure that callers hear up-to-date information.
You can record up to five personal greetings and choose which to use
from the telephone. You can also review, delete, or choose which to
make active with the NetSet utility.
If appropriate, you may also want to change the greeting for an extension
that is a “greeting-only mailbox,” so that callers do not attempt to leave
messages. See “Greeting-Only Mailbox” later in this chapter.
To change your name announcement or personal greetings:

1 Log in to your mailbox at your telephone or remotely.
2 Press 9 for Mailbox Options and then press 1.
3 To review or change your name announcement, press 1 and follow the
prompts.
4 To review or change your personal greetings, press 2 and follow the
prompts.
Using the NetSet utility, you can review or delete a personal greeting or
choose which of your recorded greetings to make active.
To hear or delete your personal greetings or choose your active personal

greeting from the NetSet utility:
1 Log in to the NetSet utility with your extension and password.

2 Select NBX Messaging > Personal Greeting.

3 Select a greeting.
a Click Select to choose the greeting as the active greeting.
b Click Listen to hear the greeting.
c Click Delete to delete the greeting. You cannot delete greeting
number 1; you can re-record it through the phone.
If you forget your password, the administrator can set it to be your

extension number. Then follow the instructions in Table 4 in Chapter 1 to
change it to a more secure password. Also see “Security Tips” earlier in
this chapter.
Listening to NBX You can listen to your NBX voice mail messages from your 3Com®
Messages Telephone, from any touch-tone telephone, or by logging in to the NBX
NetSet utility. After you listen to messages, you can save or delete them
to clear them from the New Messages queue. For how to set up your
NBX NetSet utility password the first time, see Table 4 and “NBX NetSet
Utility” in Chapter 1.

use the documentation for your messaging application instead of these
instructions.
Message Indicators Here is how you can tell if you have messages in your mailbox:
■ On a 3Com 3102 Business Telephone — The indicator bar above
the display panel is lit, and the display panel shows the number of
messages. Example: 3 Msgs 2 New.
■ On a 3Com 1102, 2102, or 2102-IR Business Telephone — The
indicator next to the MSG button is lit, and the display panel shows
the number of messages. Example: 3 Msgs 2 New.
■ On an analog telephone — Pick up the handset. If you hear the
New Messages Tone (rapid stutter tone), you have new messages or
messages that you have listened to but have not yet saved or deleted.
For information on accessing NBX features from an analog telephone,
see the NBX Feature Codes Guide in the NBX NetSet utility.
■ In the NBX NetSet utility — Log in as a user. The list of your
messages appears in the Voice Mail Messages area on the NBX
NetSet > User Information screen. A new message has a * next to
it. A forwarded messages has -->Fw: next to it.

Listening to NBX Messages 35
Listening from Your To listen to your messages from your computer, you must have a way of
Computer playing audio files:
■ A USB audio device such as a USB headset and an operating system
that supports USB
OR
■ A sound card, an application such as Windows Media Player, and
either headphones or speakers
1 Log in to the NBX NetSet utility with your extension and password.
2 Select a message in User Information > Voice Mail Messages.
3 Click Listen.
4 The third-party application downloads the voice message and plays it.
5 To delete the message, select the message and then click Delete.
Listening from Your To listen to your messages from your own 3Com Telephone:
3Com Telephone
1 Pick up the handset and press the Message button to access the
mailbox.
2 At the prompt, dial your password and press #.
3 See Table 6 for the buttons that you use to manage your messages.
Listening from Any To listen to your messages from any 3Com Telephone other than your
Internal 3Com own within your NBX system:
Telephone
1 Pick up the handset and press the Message button.
2 Press * and dial your extension. You hear your name announcement.
3 Dial your password and press #.
4 See Table 6 for the buttons that you use to manage your messages.
Listening from an To listen to your messages from an external telephone:

External Location ■ If you can dial your telephone extension directly — Press *
during your personal greeting. At the prompts, enter your extension
and password, and press #.

■ If you call the main telephone number of your organization

and:
■ The Automated Attendant answers — Press * * during your
personal greeting. At the prompts, enter your extension and
password, and press #.
■ The receptionist answers — Ask to be transferred to your voice
mail. Press * during your personal greeting. At the prompts, enter
your extension and password, and press #.
Managing Your Use these buttons to manage your messages:

Messages
Table 6 Managing Messages
Play or repeat a message.
Save the message.

Delete the message from your mailbox. You cannot
retrieve a message after you delete it.
Reply to the message. See “Replying to a Message”
Forward the message. See “Forwarding a Message”
Listen to date, time, and sender information about
the message. See “Information About Your
Messages” next.
Back up 3–5 seconds in the current message.
Pause the current message for up to 20 seconds.
Move ahead 3–5 seconds in the current message.
Move to the next message.
Return to the main menu.

Replying to a Message 37
Information About To listen to date, time, and sender information about a message in your
Your Messages mailbox, press 6 during or after the message, and then press one of these
buttons:
Date and time information.
Sender information.
Listen to the previous message.
Replying to a You can send a reply to a voice mail message, provided that the NBX
Message system has received the necessary caller ID information.
If you receive a message that is marked Private, you can reply to the
originator, but you cannot forward the message to others.
To reply to a message after you listen to it:

1 Press 4.
If the message has been sent to more than one person, press 1 to reply
only to the sender or press 2 to reply to all of the recipients.
2 After the tone, record your reply.
3 Hang up, or press # for more options.
4 If you press #, press one of these buttons:
Send your reply.
Re-record your reply.
Listen to your reply.

Mark the message Private or Urgent. See “Marking a
Message as Private or Urgent” later in this chapter.
Cancel your message.

Forwarding a You can forward most messages, with or without comments.

Message
If you receive a message that is marked Private, you cannot forward it.
To forward a message:
1 Log in to your voice mailbox at your telephone or remotely.
2 Listen to a message that you want to forward, and press 5.
3 After the tone, record an introductory message and then press # OR if
you choose not to record a comment, press # when you hear the tone.
4 Optionally, press one of these buttons, OR proceed to step 5.
Re-record your introductory comment.
Listen to your introductory comment.

Cancel your message.
5 When you are ready to forward the message, press 1.

6 Dial one of these destination numbers plus #:
■ The internal extension or mailbox number of the recipient
■ A speed dial number. See “Speed Dials” in Chapter 6.
■ A voice mail group list number. (See “Using Voice Mail Group Lists”
later in this chapter.)
■ A site code plus extension (to send to a user on another NBX system in
your organization). Example: neee or neeee (where n = one or more
site code digits and e = the extension digits on the other system).
For valid site codes in your organization, see your administrator.
7 To forward the message to several recipients, dial each destination
number followed by #.
8 After the last destination number and its #, press # again to send your
message.
9 Follow the prompts to delete or save the message you just forwarded.

Creating and Sending a Message 39
Creating and To create and send a message directly without actually making a call,
Sending a Message follow these steps:
2 Dial 2 to select Create and Send a Message.
3 At the tone, record a message that is at least 2 seconds long, and press #
to end the recording.
4 Optionally, press one of these buttons, OR proceed to step 5.
Re-record the message.
Review the message.

Cancel the message.
5 When you are ready to send the message, press 1.

■ A voice mail group list number. (See “Using Voice Mail Group Lists”
later in this chapter.)
site code digits and e = the extension digits on the other system)
7 To send the message to several recipients, dial each destination number
followed by #.
8 After the last destination number and its #, press # again to send your
message.

Using Voice Mail A Voice Mail Group, also called a mail group or mail list, is a collection of
Group Lists extensions with a special “group number.” Use it to send a message to
everyone on the list at the same time.
A Voice Mail Group is not the same as an ACD Group, Hunt Group, or
Calling Group. See “Automatic Call Distribution Groups, Hunt Groups,
and Calling Groups” in Chapter 7.
Viewing System System Voice Mail Groups can be set up by your administrator. You can
Groups send a message to everyone in a System Voice Mail Group by using * plus
the two-digit group number.
You can see a list of System Voice Mail Groups and the membership of
each group through the NBX NetSet utility.
To view System Voice Mail Groups:
1 Log in to Netset > NBX Messaging > System Group List. A list of
System Group IDs and Names displays.
2 To view the membership of any group, select the group and click
Membership.
Creating Personal You can create your own Personal Voice Mail Group either through the
Groups telephone or through the NBX NetSet Utility.
To create a personal voice mail list through the telephone:

2 Dial 9 for Mailbox Options.
3 Dial 3 for Group Lists, and then 2 for Create Group.
4 Dial a 2-digit number, 01–99, which becomes the Group Number.
5 After the tone, speak a name for the group, and press #.
6 Dial one of these numbers:
■ 1 to save the group name and proceed to step 7
■ 2 to change the group name and return to step 5
■ * to exit without saving

Using Voice Mail Group Lists 41

■ A speed dial number. See “Speed Dials” in Chapter 6
■ Another personal or system group list number
■ A VPIM extension
site code digits and e = the extension digits on the other system)
8 When you have added all of the destination numbers, press:
■ 1 to save the group list
■ 2 to cancel creating the group
■ ** to return to the previous menu
OR hang up.
To create a Personal Voice Mail List through the NBX NetSet Utility:
1 Log in Netset > NBX Messaging > Personal Group List. You see a list
of your current personal voice mail groups with Group IDs and Group
Names.
2 Click Add.
3 Enter a Group ID, a number from 01–99 that is not used for a current
group.
4 Enter a Name for the new group.
5 Enter any VPIM extensions in the VPIMs box.
6 Select members from the Non-Members list and move them to the
Members list by clicking the left arrow.
7 Click Apply and OK to complete the list.
Modifying or You can review your Personal Voice Mail Groups, add members, or delete
Deleting Personal a group from the telephone or from the NBX NetSet utility.
Groups
To review or modify a Personal Voice Mail Group from the telephone:
2 Dial 9 for Mailbox Options.

3 Dial 3 for Group Lists.

4 Press 1, 3, or 4:
Review your list of groups.
Create a group.
Delete a group.
Add or delete group members. See step 5.
Return to the main menu.
5 To add members to a group or delete members from one, press 4.

a To add one or more members to the group, dial one of these
destination numbers plus #:
■ Another personal or system group list number
■ A VPIM extension
■ A site code plus extension (to send to a user on another NBX
system). Example: neee or neeee (where n = one or more site
code digits and e = the extension digits on the other system). For
valid site codes for your organization, see your administrator.
b To delete one or more members from the group, dial the destination
number that you want to delete and then press 1.
6 When you have added or deleted all of the destination numbers, press:
■ 1 to save the modified group list
■ 2 to cancel this modification to the group
■ ** to return to the previous menu
OR hang up.

Marking a Message as Private or Urgent 43
To review or modify a Personal Voice Mail Group from the NBX NetSet
utility:
of your current personal voice mail groups.
2 Select the group to review or modify.
3 Click Modify.
4 You can change the Name for the group.
5 You can enter any VPIM extensions in the VPIMs box.
6 You can select members from the Non-Members list and move them to
the Members list by clicking the left arrow. OR select members from the
Members list and move them to the Non-Members list by clicking the
right arrow.
7 Click Apply and OK to complete your changes.
To delete a Personal Voice Mail Group from the NBX NetSet utility:
of your current personal voice mail groups.
2 Select the group to delete.
3 Click Remove.
4 Click Yes to confirm.
Marking a Message When you compose a voice message, you can select Private or Urgent
as Private or Urgent from the delivery options. If you do not select a delivery option, your
message is sent as a Normal message.
■ Private Messages — The recipient cannot forward the message to
others.
■ Urgent Messages — Places the message at the beginning of the
recipient’s message queue. Urgent messages are heard first.
1 Follow the steps in “Replying to a Message”, “Forwarding a Message”,
or “Creating and Sending a Message” earlier in this chapter.
2 In step 4 of those instructions, press 9.

3 To mark the message Urgent, press 1. To mark the message Private,

press 2.
4 To send the marked message, press 1, or listen to the prompts for other
choices.
Other Ways to You can listen to and, in some configurations, delete your voice messages
Manage Your Voice from within an e-mail application or a messaging application using your
Mail Messages Internet browser. For details, see “Listening to Your Messages in Your
E-mail” in Chapter 7.
Other Kinds of The NBX system allows you (for the greeting-only mailbox) or the
Mailboxes administrator (for phantom or group mailboxes) to set up mailboxes for
special situations, as described in this section.
Greeting-Only When you designate your mailbox as a greeting-only mailbox, callers hear
Mailbox your personal greeting but they cannot leave a voice mail message.
To change your voice mailbox to a greeting-only mailbox, select

NBX NetSet > NBX Messaging > Greeting Only Mailbox.
Examples:
■ When you take an extended leave of absence, you can create a
personal greeting with your scheduled date of return and whom to
call during your absence. Callers can be transferred but are unable to
leave voice messages for you. When you return, clear the Greeting
Only Mailbox check box so that callers can leave messages again.
■ If you are a teacher, you can create a new personal greeting on the
school’s NBX system every day to explain homework assignments.
Students call in to the greeting-only mailbox to get the homework
information but cannot leave a message for you on this mailbox.
■ If you are the administrator, you can create a greeting-only mailbox
and use the personal greeting to post information for employees, such
as a notice that the offices are closed because of bad weather.
When you create the personal greeting, remember to tell callers that they
cannot leave messages in this voice mailbox. For instructions on changing
the personal greeting, see “Changing Your Name Announcement and
Personal Greetings” earlier in this chapter.

Other Kinds of Mailboxes 45
In addition to preventing a caller from leaving a message, a greeting-only

mailbox does not allow anyone to forward or create and send a message
to it or reply to a message that was sent from its extension
Avoid adding a greeting-only mailbox to a personal voice mail group list.
Phantom Mailbox A phantom mailbox does not have an actual telephone associated with it.
The administrator sets up a phantom mailbox.
Examples:
■ If you are a sales representative who travels constantly for your
organization and never comes into the office, you still need a way to
receive telephone messages. Using your phantom mailbox, you can
retrieve, forward, and save messages in the same way that any other
employee can but without a physical telephone connected to your
NBX system.
■ If you are an employee who lives a long distance from your office and
works from home, customers and others can leave messages in the
your phantom mailbox and you can call in to the NBX system to
retrieve them, or you can listen to them from the NBX NetSet utility.
You retrieve messages from a phantom mailbox in the same way that you
retrieve messages from a personal mailbox. See “Listening to NBX
Messages” earlier in this chapter.
Group Mailbox A group mailbox is a voice mailbox from which a group of users can
retrieve messages. Your administrator creates group mailboxes and can
explain how to retrieve messages that are left in the group mailbox.
Example:
■ During nonbusiness hours, the system can send incoming telephone
calls for your sales department to a group mailbox. Your administrator
assigns to the appropriate sales people the ability to listen to, forward,
or otherwise handle all messages that are directed to the group
mailbox.
Your administrator can assign (map) a Message Waiting Indicator for the
group mailbox to an Access button on the 3Com Business Telephone of
each group member. The light next to the mapped button indicates when
the group mailbox has messages in it. Any group member can press the
button to retrieve messages from the group mailbox.


STANDARD FEATURES
5
This chapter describes standard features of the NBX® Telephones. It
covers these topics:
■ Answering a Call
■ Using the 3Com Telephone Display Panel
■ Dialing a Call
■ Forwarding Incoming Calls
■ Putting a Call on Hold
■ Transferring a Call
■ Direct Mail Transfer
■ Establishing a Conference Call
■ Setting the Volume
For help on accessing NBX features from an analog telephone, see the
NBX Feature Codes Guide in the NBX NetSet™ utility.

instructions in this chapter.
Answering a Call To answer an incoming call, pick up the handset. If you are using a
3Com® Business Telephone, you can press the Speaker button. If you
have enabled Handsfree Active on Intercom, you can simply speak to
answer internal calls.
An unanswered call on any telephone on the NBX system is forwarded to

the call coverage point that you specify in NBX NetSet > User
Information > Call Forward Default or Call Forward Override. To
specify the number of times that your telephone rings before the call is

48 CHAPTER 5: STANDARD FEATURES
forwarded or to specify where you want the call to go, see “Forwarding
Incoming Calls” later in this chapter.
Caller ID The display panel on your 3Com Telephone shows the name and
extension of an internal caller. For an external caller, if your organization
purchases Caller ID service from your telephone company and if the
external caller allows Caller ID information to be broadcast, the display
panel shows the external caller’s name and telephone number.
Answering a On 3Com Business Telephones, when a new call arrives while you are on
Second Call a call:
1 Press Hold to put the current call on hold.
2 Press the Access button for the line on which the new call is arriving.
3 To return to the earlier call, hang up the new call, or put it on hold, or
transfer it, and then press the Access button for the original call.
Using the 3Com Use the telephone display panel of your 3Com Telephone to dial a
Telephone number:
Display Panel ■ Call Logs — The logs of the most recent calls to and from your
telephone (Missed Calls, Answered Calls, Dialed Calls).
■ Directory — A list of the users on your system and their extensions.
■ Personal Speed Dials — A list of personal speed dial numbers that
you have set in NBX NetSet > Speed Dials.
■ System-wide Speed Dials — A list of the system-wide speed dial
numbers set by your administrator. You can print and view these
numbers in NBX NetSet > System Speed Dials.
To access the display panel lists:

1 Pick up the handset. Press the up or down scroll key to the right of the
display.
On 3Com Business Telephones, you can press a scroll key, select a
number, and dial without picking up the handset.
2 Use the scroll buttons to move through the lists. When you see the list
that you want to use, press the button under Slct (Select).

Using the 3Com Telephone Display Panel 49
3 Use the scroll keys to move to the name or number that you want to call.
Verify that the cursor is at the entry you want, and press the button under
Slct.
4 To move back to the previous menu, press the button under Back.
5 To leave the lists entirely, press the Exit soft button. OR press an Access
button that is programmed for Release. OR hang up.
Tips on After you press the up or down scroll key (3102 Business Telephone scroll
Using the Lists keys shown), if you do not select an item immediately, the display
alternates between the list:
Call Logs
Directory
and the menu choices:
Select an entry
Slct | Back | Exit
In the user directory, names appear in alphabetical order, by last name.

The system updates the directory when the administrator adds or
removes users.
Lee Man Yee

Lee Margaret
In the user directory, to move quickly to the first name that begins with a
particular letter, you can use the key pad. Example: Press 3 to show the
first name that begins with D; press 3 twice to move to the first name
that begins with E; press 3 three times to move to the first name that
begins with F. Then scroll up or down to the name that you want.

Dialing a Call This section describes standard dialing features. For information on
dialing from an analog telephone, see the NBX Feature Codes Guide in
the NBX NetSet utility.
An Internal Call To dial an internal call:

1 Pick up the handset. On 3Com Business Telephones, you can press the
Speaker button. You hear the dial tone. If necessary, select an internal
line.
2 Dial the person’s 3-digit or 4-digit extension. Or use the display panel to
find and dial the name of the person whom you want to call in the user
directory, call logs, or a speed dial list.
3 When you are finished, hang up the handset. If you pressed the Speaker
button, press it again to end the call.
For details about placing calls to remote or branch offices, see “Dialing a
Call to a Remote Office” in Chapter 7.
An External Call To dial an external call:

1 Pick up the handset. On 3Com Business Telephones, you can press the
Speaker button. You hear the dial tone. If necessary, dial 9, 8 or
whatever to access an external line. If one of the Access buttons is
configured to access an external line directly, you can press that button.
2 Dial the number. Or use the display panel on a 3Com Telephone to scroll
to a missed, answered, or dialed number, or a personal or system-wide
speed dial number. If you have programmed one of the One-Touch
buttons, press that button.
3 When you finish speaking, hang up the handset. If you pressed the
Speaker button, press it again to end the call.
Redialing a Call On a 3Com Business Telephone:

■ Pick up the handset and press Redial to dial the most recent number
that you called.
OR
■ Use the Call Logs on the display panel to redial a recently missed,
answered, or dialed call.

Forwarding You can choose when and where to forward unanswered incoming calls.
Incoming Calls Unanswered calls that come in directly to your extension go to a call
coverage point. You can set different call coverage points for different
conditions: default, no answer, busy, and all calls.
Unanswered calls that come to your telephone through ACD groups,

hunt groups, and calling groups follow the call coverage path that your
administrator sets up for the group. See “Automatic Call Distribution
Groups, Hunt Groups, and Calling Groups” in Chapter 7.
When you specify call forwarding, you specify the call coverage point and
the condition under which to forward calls.
Call Coverage Points Your call coverage points are the destinations you forward your calls to
when you do not answer. They can be telephone extensions or external
telephone numbers, your voice mail box, or an automated attendant.
Condition to Forward You can choose when to forward calls:

Calls ■ Default —Forwards unanswered incoming calls to your default call
coverage point after a specified number of rings if you have not
specified another condition.
■ Call Forward No Answer — Forwards unanswered incoming calls to
a call coverage point when your phone rings for a specified number of
rings.
■ Call Forward Busy —Forwards incoming calls to a call coverage point
when your phone is busy.
If you have multiple lines, all lines must be in use in order for Call
Forward Busy to engage.
■ Call Forward All — Forwards all incoming calls without ringing to a
call coverage point regardless of the state of your phone.
Use this feature when, for example, you plan to be away from your
phone for an extended period of time.
Setting Call Forward You can set call forwarding from your telephone. You choose the
from the Telephone condition for call forwarding (default, no answer, busy, or all) and the
destination. When you specify an external telephone number as the
destination, start by entering a 9 or 8 or whatever is required to access an
outside line. Example: 912815551212 dials (281) 555-1212. You can

enter a * if a pause is required between an access code and a destination

number.
The number that you choose may be limited by your call permissions. To
view your permissions, see NBX NetSet > User Information > Call
Permissions.
From the telephone, you can set call forwarding using feature codes. Use
the NetSet utility to see your call forwarding settings. Your administrator
can also set programmable access buttons for call forwarding. And you
can select Call Forward All directly from the display panel.
Forward to Mail
From the telephone, you can set your 3Com Telephone so that all
incoming calls go directly to your default call coverage point, usually your
voice mailbox. You can change the destination to the Auto Attendant or
receptionist or a different telephone number. This feature is referred to as
FWD MAIL, Forward to Mail, Forward All Calls to Voice Mail, and Forward
All Calls to VM. When Forward to Mail is in effect, your telephone rings
once before forwarding the call to your default call coverage point.
On a 3Com 3102 Business Telephone:

1 Press the (Forward to Mail) button. The indicator light turns on.
2 To turn off Forward to Mail, press the button again. The light turns off.
On a 3Com 1102, 2102, or 2102-IR Business Telephone:

1 Press the FWD MAIL (Forward to Mail) button. The indicator light turns
on.
2 To turn off Forward to Mail, press the button again. The light turns off.
To set your default call forwarding destination, use the NetSet utility. See
“Default” later in this section.
To prevent the telephone from ringing even once, use the Do Not Disturb
feature (see “Do Not Disturb” in Chapter 6) or use the Call Forward All
feature (see “Call Forward All” later in this section).
Call Forward No Answer, Call Forward Busy, and Call Forward All override
this Forward to Mail setting if they are in effect. If you turn off Forward to
Mail and no other call forward options are in effect, unanswered calls still
go to your default call coverage point but after the number of rings
specified in NBX NetSet > User Information > Call Forward Default.

To view your current Forward to Mail setting, log in to

NBX NetSet > User Information > Feature Settings and see Forward
All Calls to VM.
Call Forward No Answer

To set Call Forward No Answer:
1 Pick up the handset, and press Feature + 466.
2 Dial the number that you want to forward calls to and press #. If the
display shows the destination number you want, just press # to accept it.
3 To turn off Call Forward No Answer, pick up the handset and press
Feature + 466 again.
You can specify the number of rings before the call is forwarded by
logging into NBX NetSet > User Information > Call Forward
Override.
Call Forward Busy

To set Call Forward Busy:
display shows the destination number you want, just press # to accept it.
3 To turn off Call Forward Busy, pick up the handset and press Feature +
467 again.
Call Forward All

To set Call Forward All:
display shows the destination extension you want, just press # to accept
it.
3 To turn off Call Forward All, pick up the handset and press Feature + 465
again.
To set Call Forward All from the display panel:

1 Scroll to CFWD ALL on the display panel.
2 Press the Set soft button to select CFWD ALL.
3 Press the Set soft button again.

4 If the telephone number you want was entered previously and displays,
press # to accept it. Otherwise, enter the telephone number to forward
calls to and press #.
To cancel Call Forward All from the display panel:

1 Scroll to CFWD ALL on the display panel.
2 Press the Set soft button to select CFWD ALL.
3 Press the Set soft button again to select Cancel CFWD ALL.
Setting Call Forward From the NetSet utility, you can set default call forwarding or choose to
from the NetSet override the default with a condition for call forwarding (No Answer,
Utility Busy, or All) and a destination. For telephone numbers, do not use
parentheses, hyphens, or spaces. When you specify an external telephone
number, start by entering a 9 or 8 or whatever is required to access an
outside line. Example: 912815551212 dials (281) 555-1212. You can
enter a * if a pause is required between an access code and a destination
number.
Default
The Call Forward Default page defines basic call forwarding. You
choose from four destinations: voicemail box, a phone number, the
automated attendant, or disconnection. You can override these settings
on the Call Forward Override page or by making changes on the
telephone.
To set the default call forwarding:

1 Log in to NBX NetSet > User Information > Call Forward Default.
2 Select your choice for the Number of rings before forwarding a call.
3 Select a call coverage point:
■ If you select Forward to voicemail box, the caller can leave a
message.
■ If you select Forward phone number, enter that extension or
external phone number in the box.
The number that you choose may be limited by your call permissions. To
view your permissions, see NBX NetSet > User Information > Call
Permissions.

The check box below Forward phone number specifies where you
want to forward calls that are not answered at the internal extension
that you specified as the Forward phone number.
If you check the box, calls that are unanswered at the number you
forward them to are passed on to your choice of:
■ User Voicemail — Your voicemail box
■ Default Menu — The default automated attendant, usually
extension 500
■ Voicemail — The default system voicemail, usually extension 501
If you leave the box unchecked, calls that are unanswered at the
number you forward them to are passed on to the destination
specified for that number. This setting can result in having your calls
forwarded to another person’s voicemail or to a loop of forwarding
where the call is never answered.
■ If you select Automated Attendant, you can choose to forward calls
to your choice of:
■ Default Menu — The default automated attendant, usually
extension 500
■ Voicemail — The default system voicemail, usually extension 501
■ If you select Disconnect (no coverage), the system disconnects an
incoming call if it is not answered after the specified number of rings.
4 Click Apply, and then click OK.
Override
To set the call forward override:
1 Log in to NBX NetSet > User Information > Call Forward Override.
2 Select your call forward conditions:
■ If you select Call Forward All, calls will not ring at all on your
extension and will be immediately forwarded to the extension or
external phone number you specify in the box.

■ If you select the next button, you can select either or both of the
following conditions:
If you select Call Forward Busy, calls will not ring at all when all of
your lines are busy and will be immediately forwarded to the extension
or external phone number you specify in the box.
If you select Call Forward No Answer, calls ring the number of times
you specify in the rings box. If they are not answered then, they will be
forwarded to the extension or external phone number you specify in
the box.
■ If you select No action, call forwarding follows the specifications of
the Call Forward Default page.
3 Click Apply, and then click OK.
Call Forward Five features can interact to affect call forwarding: Forward to Mail, Call
Precedence Forward No Answer, Call Forward Busy, Call Forward All, and Do Not
Disturb. If they are enabled at the same time, the NBX system determines
precedence, which call forwarding path is in effect, according to the
following rules:
■ If Call Forward All is enabled, all calls are immediately forwarded to
the Call Forward All destination. All other feature settings are ignored.
■ If Do Not Disturb is enabled and Call Forward All is not enabled, all
calls are immediately forwarded to the Call Forward Default
destination. All other feature settings are ignored.
■ If Call Forward Busy is enabled and Call Forward All and Do Not
Disturb are not enabled, all calls received when this extension is busy
are immediately forwarded to the Call Forward Busy destination. All
other feature settings are ignored.
■ If Call Forward No Answer is enabled and Call Forward All and Do Not
Disturb are not enabled, all calls received when this extension is not
busy are forwarded to the Call Forward No Answer destination after
the specified number of rings. All other feature settings are ignored.
■ If Forward to Mail is enabled and Call Forward All, Do Not Disturb, Call
Forward No Answer, and Call Forward Busy are not enabled, all calls
received when this extension is not busy are forwarded to the Call
Forward Default destination after one ring.

Putting a Call on Hold 57
■ If no call forwarding settings are enabled, all calls received this

extension is busy are immediately forwarded to the Call Forward
Default destination. If this extension is not busy, all calls are forwarded
to the Call Forward Default destination after the number of rings
specified in the Call Forward Default page of the NetSet utility.
Putting a Call You can put a call on hold for any reason.
on Hold
On 3Com Business Telephones:
1 Press the Hold button.
2 To return to the call, press the appropriate Access button.
Dialing Another Call You can place a call on hold to dial a new call,
On 3Com Business Telephones:

1 Press the Hold button.
2 Press one of the Access buttons that is currently not being used.
3 When you hear dial tone, dial the second call.
More Than One Call The number of simultaneous calls that you can have on your 3Com
Telephone is limited by the number of Access buttons that are defined for
your extension. The default is the bottom three buttons in the column of
Access buttons on the left of the 3102 Business Telephone and the
bottom three Access buttons in the column on the right on the 1102,
2102, or 2102-IR Business Telephones. Your administrator can verify the
number and location on your telephone.
To place more than one call on hold on a 3Com Business Telephone:

1 To place the current call on hold, press the Hold button.
■ To make a call, press one of the Access buttons that is currently not
being used. When you hear dial tone, dial the call.
■ To receive a call, locate the flashing status light that indicates the
incoming call and press the associated Access button.
2 To place the new call on hold, press Hold.
3 To return to either call, press the appropriate Access button.
4 To place or receive another new call, repeat the previous steps.

Transferring a Call When you answer an incoming telephone call, the Transfer feature allows
you to send that call from your telephone to any other internal line or, if
your call permissions allow, to an outside line. To view your permissions,
log in to NBX NetSet > User Information > Call Permissions. Your
administrator can change your call permissions.
Announced Before you complete a transfer, you can announce to the recipient that
(Screened) Transfer you are transferring a call. The recipient can then decide whether to take
the call. To announce a transfer:
1 While on a call, press the Transfer button. The system places the caller
on hold and selects a new line.
2 Dial the number to which you want to transfer the call.
3 When the recipient answers, announce the call.
■ If the recipient wants to take the call, press Transfer again to
complete the transfer. Hang up the handset.
■ If the recipient does not want to take the call, retrieve it by pressing
the Access button on which the call originated.
Your administrator can disable Announced Transfers (by enabling the One
Button Transfer feature) for the entire NBX system. When that setting is
enabled, every time that you transfer a call, the call is transferred as soon
as you dial the extension and hang up — without waiting for you to
announce the call.
Blind Transfer In a blind transfer, you transfer the call without notifying the recipient:
1 While on a call, press the Transfer button. The system places the caller
on hold and selects a new line.
2 Dial the number to which you want to transfer the call.
3 As soon as you hear a full ring, press the Transfer button and hang up.
(If you press the Transfer button too soon after you dial the number, the
transfer may not occur.)

Direct Mail Transfer 59
Direct Mail Transfer You can transfer a call directly into another user’s voice mailbox. The call
does not ring on that user’s telephone.
Calls transferred to a user’s mailbox by means of Direct Mail Transfer are

always directed into that user’s voice mailbox, even if the recipient has
specified a different call coverage point.
On a 3Com Business Telephone:

1 While you are on a call, press the Access button assigned to Direct Mail
Transfer.
2 Dial the extension of the person to whose voice mailbox you want to
transfer the call.
3 Hang up the handset.
Establishing a You can establish a Conference Call with up to four parties, including
Conference Call yourself. You must be using a telephone on the NBX system to establish
the call. The other three parties can be any combination of internal and
external parties.
Follow these steps:

1 Dial a call, or receive a call from someone else. Two parties are now on
the call.
2 While on the call, press the Conference button. The system selects a new
line and places the first party on hold.
3 Dial a call to an internal or external third party.
■ For an announced conference, wait for the third party to answer the
call. The second party remains on hold, and you may converse with
the third party privately until you finish adding the third party. To add
the third party, press the Conference button the second time.
■ For a blind conference, press the Conference button immediately
after you dial the number. You return to the conference, and you and
the second party hear the called party’s telephone ringing.
You can also use Feature + 430 to add another party to a conference.
If the third party answers, three parties are now in the conference call.

If the third party is internal and does not answer, the attempt to
conference that party is cancelled. You cannot establish a conference call
with an NBX user’s voice mailbox.
4 Repeat steps 2 and 3 to conference in a fourth party.
■ You can activate speaker phone operation during the conference call
by pressing the Speaker button.
■ You can turn off the microphone or the mouthpiece on the handset
by pressing the Mute or button. The other parties cannot hear
you, but you can hear them.
■ For details about the Speaker and Mute features, see “Telephone
Buttons and Controls” in Chapter 2 for the 3102 Business Telephone
or “Telephone Buttons and Controls” in Chapter 3 for the 1102,
2102, and 2102-IR Business Telephones.
Disconnecting the Use the Conference Drop feature to disconnect the last person that you
Last Person add to a conference call. This feature is helpful if, when you add a party,
That You Called your call is answered by someone else.
■ Only the person who added the last caller to the conference call can
drop that caller.
■ Your administrator can configure any Access button on a 3Com
Telephone or the Attendant Console to be a Conference Drop
button.
On a telephone that does not have a button programmed for Conference

Drop:
1 Press Feature + 431.
2 The system returns you to the others who are in the conference call.

Setting the Volume 61
More About ■ To place your part of a conference call on hold, press the Hold or
Conference Calls button. The other parties can talk among themselves, but they cannot
hear you. Music on Hold does not play when a conference call is on
hold.
■ To transfer a conference call to another telephone, press the Transfer
button. Dial the number to which you want to transfer the call,
announce to the recipient (optionally) that you are transferring a
conference call, and then press the Transfer button again.
■ All of the conferenced parties are transferred except yourself.
■ Your ability to drop the last person that you added to the
conference is transferred to the person who accepts the transfer.
Setting the Volume On any 3Com Telephone, use the Volume Control buttons to raise or
lower one of these volumes:
■ Ring Volume — To raise or lower the volume of the ring, press the up
or down Volume Control button repeatedly while your telephone is
ringing, until the volume is at the level that you prefer. To read how
ringer volume is different from ringer tone, see “Ringer Tones” in
Chapter 6.
■ Handset Volume — To raise or lower the volume of the dial tone or
the sound that you hear when you are using the handset, pick up the
handset and then press the up or down Volume Control button
repeatedly until the volume is at the level that you prefer. You can
change the handset volume during a conversation or by listening to
the dial tone.
■ Speaker Volume — To raise or lower the volume of the sound that
you hear when you are using the speaker phone for a conversation or
just listening to the dial tone, press the Speaker button and then
press the up or down Volume Control button repeatedly until the
volume is at the level that you prefer.
■ Headset Volume — To raise or lower the volume of the dial tone or
the sound that you hear on the headset, put on the headset and
activate it as specified for your headset. When you hear the dial tone
or during a conversation, press the up or down Volume Control
button repeatedly until the volume is at the level that you prefer. See
“Using a Headset” in Chapter 6.


PERSONALIZING YOUR TELEPHONE
6
Your NBX® Networked Telephony System has many features that can
make your telephone easier to use. This chapter describes:
■ Guidelines About Features on NBX Telephones
■ Ringer Tones
■ Speed Dials
■ Off-Site Notification
■ Do Not Disturb
■ Preventing Unauthorized Use of Your Telephone
■ Class of Service Override
■ Using a Headset
■ Palm Integration
NBX Feature Codes Guide below any screen in the NBX NetSet™ utility.
For how to set up your NBX NetSet utility password for the first time, see
Chapter 1.

instructions.
Guidelines About ■ If your telephone does not have a button programmed for Feature,
Features on NBX ask your administrator to program one.
Telephones ■ Because your administrator determines whether some of the features
that are described in this chapter are available for your telephone or
for the entire system, some of these features may not be available to
you.

64 CHAPTER 6: PERSONALIZING YOUR TELEPHONE
■ The settings on your telephone, including your extension, personal

settings, and system settings, remain the same even when you move
your telephone from one Ethernet jack to another, as long as both
Ethernet connections are part of the same LAN.
■ Because your extension and personal settings are associated with your
telephone, you cannot switch your telephone with another user’s
telephone without first having your administrator reassociate your
profile with the other telephone.
Ringer Tones To help you to distinguish the ring tone of your 3Com Telephone from the
sound of other phones, use the NBX NetSet utility to select one of nine
ringing tones. You can also choose Silent Ring to disable audible ringing.
To change the ringer tone:

1 Verify that your computer has a sound device (a USB headset or a sound
card with either headphones or speakers).
2 Log in to NBX NetSet > Ringer Tones.
3 Click each of the nine Sample Ringer Tone buttons to hear the choices.
4 From the Ringer Tone Setting pull-down list, select the number of the
tone that you want.
5 Click Apply.
When you choose Silent Ring, the status light or display panel icon flashes
when a call arrives, but the telephone never rings. A headset attached to
the headset connector of a 3102 Business Telephone also plays a tone
audible only through the headset.
Speed Dials This section describes the types of speed dials:

■ Personal
■ System-wide
■ One-Touch
It also describes how you can print a list of speed dials. You can also print
a set of labels for your telephone, showing which of your buttons are
mapped to features and speed dial numbers.

Speed Dials 65
Personal Speed Dials You can create a list of up to 99 personal speed dials (using ID numbers
601 through 699) for your telephone. These speed dials are available only
from the telephone for which they were created.
You create, view, and print your personal speed dial list using the NBX
NetSet utility. You can view and dial a personal speed dial number using
the telephone display panel of a 3Com Telephone.
Your first personal speed dial numbers appear on whichever of the Access
buttons at the right of your 3Com Business Telephone are not used for
other purposes.
The bottom 3 buttons on a 3Com Business Telephone are normally

reserved for your extension. On a 3Com 3102 Business Telephone, by
default, your extension appears on the bottom 3 buttons of the left
column of 9 buttons. On the 1102, 2102, and 2102-IR Business
Telephones, your extension appears by default on the bottom 3 buttons
of the column of 12 buttons.
Your administrator may have mapped some of the buttons to features.

See “Special Case: One-Touch Speed Dials” later in this chapter.
To assign or change a personal speed dial number:

1 Select NBX NetSet > Speed Dials > Personal.
2 In the Personal Speed Dials box, select an unassigned speed dial ID
number, or select the speed dial ID number for which you want to change
the speed dial number.
3 In the Destination Number text box, type the telephone number that
you want the system to dial when you use that ID number.
Include all of the prefix numbers that you would normally dial, such as a 9
or 8 or 1 to access an outside line, and, if necessary, the country code or
area code. Do not use spaces, hyphens, commas, or other nonnumeric
characters.
4 In the Account Code box, type an account code if it is required or useful
for calls to this destination.
5 In the Comment text box, type a brief description, usually a name, that
corresponds to the number.
6 After you have made all of your changes to the personal speed dials, click
Apply, and then click Close.

To use a personal speed dial:

1 Pick up the handset. Or you can press the Speaker button.
2 Press the Feature button plus the 3-digit personal speed dial code for the
number that you want to call. Or scroll to Personal Speed Dials on the
display panel, press Slct, scroll to the number that you want to dial, and
press Slct again.
If you dial a speed dial code that has no number assigned to it, the display
panel on your telephone shows the message “No number stored.”
System-wide The administrator can set up to 100 system-wide speed dials (using ID
Speed Dials numbers 700 through 799) for numbers that are dialed frequently by
many internal users. You can view the system-wide speed dial list through
the NBX NetSet utility. Or you can view and dial from it using the
telephone display panel.
You can ask the administrator to map a system-wide speed dial ID

number to one of the Access buttons on your telephone. See “Special
Case: One-Touch Speed Dials” next.
To use a system-wide speed dial:

1 Pick up the handset. Or you can press the Speaker button.
2 Press the Feature button plus the 3-digit system-wide speed dial ID code
for the number that you want to call. Or scroll to System Speed Dials on
the display panel, press Slct, scroll to the number that you want to dial,
and press Slct again.
If you dial a speed dial code that has no number assigned to it, the display
panel on your telephone shows the message “No number stored.”
Special Case: One-Touch speed dials use Access buttons.

One-Touch
Speed Dials In most circumstances, your administrator designates 3 Access buttons as
extension lines to manage incoming and outgoing telephone calls.
■ 3Com 3102 Business Telephone — See item 1 in Figure 2 in

Chapter 2.
■ 3Com 1102, 2102, and 2102-IR Business Telephones — See item 8
in Figure 4 in Chapter 3.

Speed Dials 67
Any of the remaining buttons that the administrator has not mapped to a
feature or system-wide speed dial is available for a One-Touch speed dial.
Use either the One-Touch or the Personal speed dial screen to assign or
change the One-Touch speed dial numbers on your telephone. If you
make a change in one screen, it appears in the other screen. See
“Personal Speed Dials” or follow these steps for the One-Touch screen.
To add or change a One-Touch speed dial on an available Access button:

1 Log in to NBX NetSet > Speed Dials > One Touch.
2 Any box that has an asterisk in the margin is available for a personal or
system-wide speed dial. In any of the asterisked text boxes under
Number, type the telephone number to which you want to assign a
speed dial button. Or change the telephone number in a box that already
has a speed dial number.
Include all of the prefix numbers that you would normally dial, such as a 9
or 8 or 1 to access an outside line, and, if necessary, the country code or
area code.
To include an account code, include the feature code, account code, and
# before the telephone number Example: [888]1234#9785551212. Do
not use spaces, hyphens, commas, or nonnumeric characters other than
# and brackets.
3 In the Description text box, type a brief description, usually a name that
corresponds to the number.
4 After you have made all of your changes to the One-Touch speed dials,
click Apply, and then click OK.
If you make a change in this screen, the change also appears in the
Personal Speed Dials screen. See “Personal Speed Dials” earlier in this
chapter.
Printing You may find it useful to have a paper list of personal or system speed
Speed Dial Lists dials. To print a list of speed dials:
1 Log in to NBX NetSet > Speed Dials > Personal or System-wide.
2 Click
3 A list appears with all of the personal or system-wide speed dial numbers
that are allocated to your telephone.
4 Click Print to print the list.

Printing Labels You can print labels that identify the numbers and features that are
assigned to Access buttons on your telephone or attendant console using
the LabelMaker in the NBX NetSet utility or on the NBX Resource
Pack CD.
To print labels for your telephone or attendant console:

1 Log in to NBX NetSet > Speed Dials.
2 Choose Telephone Labels or Attendant Console Labels. Save the file
to your choice of location on your PC, and then open the file to start the
LabelMaker program.
3 Find the page in the LabelMaker that has labels for your telephone.
4 Edit the label template by clicking any of the label text boxes to highlight
the existing text, and then typing new text.
5 Press Tab to move to the next text field in the label.
6 Click the Print button at the top of the LabelMaker screen to open the
Print dialog. Be sure to specify which page you want to print. Typically,
the default is to print all pages.
7 Click Print.
8 Cut out the labels and put them in the label holders of your 3Com
Telephone or your Attendant Console.
9 To save the edited LabelMaker, click the Save button at the top of the
LabelMaker screen. Or you can click File > Save As to save the
LabelMaker to a new location.
To reuse your saved LabelMaker, you must run the file that you saved to
your computer. If you download the LabelMaker from the NBX NetSet
utility again, you get the default version, and the download might
overwrite your saved LabelMaker. To create a Windows Desktop shortcut
to your saved LabelMaker, right-click the saved file and then click
Send To > Desktop (create shortcut).
Off-Site When you enable off-site notification, the NBX Messaging system notifies
Notification you by e-mail, pager, or telephone that you have received voice mail. You
can then retrieve your messages. Off-site notification consists of one cycle
of up to five attempts to reach you, one attempt for each Attempt row
that you configure in the Off-Site Notification screen.


instructions.
To configure off-site notification for your NBX voice mailbox:

1 In NBX NetSet > NBX Messaging > Off-Site Notification, look for the
System and Group columns in the upper right corner. If the columns
show “Yes,” your system administrator has enabled off-site notification
for the NBX system and for the Class of Service group to which your
telephone belongs. If “No,” ask to have these features enabled.
2 Check Enabled.
3 If you want to be notified only about urgent voice mail messages, also
check Urgent Messages Only.
4 In the first Attempt row, in the Method drop-down list, select Pager,
VoiceMail, or EMail
The cycle of notice behaviors differs depending on the method that you
specify for the first attempt. See “Notice Behaviors” later in this chapter.
5 In the Number/Address field:
■ If you selected Pager for Method in step 4:
■ Enter a pager number. Do not use parentheses, hyphens, or spaces.
Ask your administrator if you need to include the area code and
any other digits that your system needs to dial an outside number,
such as 9, 8, 1, or 0. After you receive the pager message, you call
in to your voice mailbox to listen to your messages.
■ In the Numeric Page field, indicate what you want the pager to
display. Enter a series of digits, such as your telephone extension
number.
■ If you selected VoiceMail for Method in step 4:
■ Enter the telephone number at which you want to be notified. Do
not use parentheses, hyphens, or spaces. Ask your administrator if
you need to include the area code and all other digits that your
system needs to dial an outside number, such as 9, 8, 1, or 0.
When you choose to be notified by voice mail, the NBX system calls
the number that you enter in this field. When you answer the call,
the system announces the new voice message and allows you to
follow the prompts to access your voice mailbox and listen to and
delete any of your messages.

■ If you selected EMail for Method in step 4:

■ Enter the e-mail address at which you want to be notified. You can
use different e-mail addresses for different Attempts.
When you choose to be notified by e-mail message, the NBX
system sends you an e-mail message for each voice mail message
that you receive. The voice message may be attached to the e-mail
message as a WAV file. See the tables in “Notice Behaviors” later
in this section.
You can listen to the messages using your PC sound device (a USB
headset or a sound card with either speakers or headphones).
If you delete the e-mail notice with its attached WAV file after you listen
to the message, you delete only the copy. The original voice mail message
remains in your NBX voice mailbox. You must log in to the NBX voice mail
system by telephone or through the NBX NetSet utility to delete your
messages.
6 From the Interval drop-down list box, select the number of minutes that
you want the system to wait after each attempt before it moves to the
next attempt.
The “best” time interval depends on the Attempt method that you
choose. For instance, allow sufficient time after a Pager notification for
the usual delay at your pager supplier.
7 Click Apply.
8 Repeat steps 4 through 7 to set up additional attempts if you want.
The cycle of notice behaviors differs depending on the method that you
select for the first attempt. See “Notice Behaviors” at the end of this
section.
9 You do not need to configure every Attempt row. When you have
configured all of the Attempt rows that you want, click OK. The NBX
Messaging tab appears.
10 Test your off-site notification settings by leaving yourself a voice mail
message.
Additional Notes
■ You can use the same notification method for all five attempts, or any
combination of methods.
■ If your voice mailbox is full and someone tries to leave you a voice mail
message, the NBX system does not send you an e-mail notification.

■ When you activate the Telephone Locking feature on your

telephone, the NBX system sends you off-site notification messages
only if the notification number (for example, your pager number) is a
toll-free telephone number. See “Telephone Locking” later in this
chapter.
Notice Behaviors
These tables explain how the cycle of notice behaviors depends on the
method that you select for the first attempt. See the definitions as well
as “Resetting the Off-Site Notification Cycle”.
■ If you specify EMail for the first attempt:
Attempt Method Notice Behavior

1 E-mail ■ You receive an e-mail notice for each voice
message.
■ Each e-mail notice contains information about
the voice message (like time of receipt and the
number that called), and the voice message is
attached as a WAV file.
and then you configure attempt:
2 through 5 as E-mail ■ You receive an additional e-mail notice for each
voice message.
■ The second e-mail notice contains no
information about the voice message (like time
of receipt and the number that called) and no
WAV file attachment.
2 through 5 as Pager ■ You receive a pager call for each voice
message.
2 through 5 as VoiceMail ■ You receive a telephone call for each voice
message. Follow the prompts to log in and
listen to messages, or log in to the NBX NetSet
utility.
■ If you specify Pager or VoiceMail for the first attempt:
Attempt Method Effect

1 Pager or ■ You receive a telephone call or pager call for
Voice Mail only the first new voice message.*
and then you configure attempt:

Attempt Method Effect

2 through 5 as E-mail ■ You receive an e-mail notice for only the first
new voice mail message.* The e-mail notice
contains no information about the voice
message (like time of receipt and number that
called) and no WAV file attachment.
2 through 5 as Pager ■ You receive a pager call for only the first new
voice message.*
2 through 5 as Voice Mail ■ You receive a telephone call for only the first
new voice message.*
*First new message means the first voice mail message that arrived at your mailbox since the
last time that you logged in to your voice mailbox through a telephone OR through the NBX
NetSet utility. Logging in restarts the cycle.
Resetting the Off-Site Notification Cycle

When you log in to your voice mailbox and hang up or log out (regardless
of whether you listen to or delete messages), you start the off-site
notification cycle again. You will be notified about the next message that
comes into your voice mailbox.
Managing Off-site To manage your off-site notification settings directly through the
Notification Using the telephone:
Telephone
1 Log in to your voice mailbox at your telephone or remotely.
2 Press 9.
3 Press 4, select one of these options, and follow the prompts:
Button Description
1 Enable off-site notification.
2 Disable off-site notification.
3 Change off-site notification settings.
4 Review current off-site notification settings.
* Return to the main menu.

Do Not Disturb 73
Do Not Disturb When the Do Not Disturb feature is in effect, calls coming in to your
telephone immediately go to your default call coverage point without
ringing. You set the default call coverage point by logging in to NBX
NetSet > User Information > Call Forward Default. See “Forwarding
Incoming Calls” in Chapter 5.
If Call Forward All is in effect, it overrides Do Not Disturb. Calls go to the
call coverage point defined for Call Forward All in NBX NetSet > User
Information > Call Forward Override.
You can ask your administrator to map the Do Not Disturb feature to an
available Access button on your 3Com Telephone, or you can use the
Feature Code to enable and disable the feature.
When Do Not Disturb is in effect:

■ It overrides Call Forward No Answer, Call Forward Busy, and FWD
MAIL.
■ Your telephone does not ring when it receives an incoming call.
The associated status light does flash when a call arrives.
■ You can use the telephone to dial outgoing calls.
■ You can use the telephone to dial internal and external pages.
■ a 3Com Business Telephone or 3Com Manager’s Telephone does not
broadcast incoming paging messages over the speaker.
■ If your telephone is part of a call pickup group, no other telephone in
the pickup group can retrieve a call that comes directly in to your
telephone. The incoming call goes immediately to the call coverage
point (voice mail, auto attendant, or other extension).
■ If your telephone is part of an ACD group, a hunt group, or a calling
group, incoming calls to the group ring on your telephone. Calls
coming in directly to your telephone (not directed to the group) do
not ring on your telephone. To prevent every call from ringing, you
must enable Do Not Disturb and also log out of the group.
To enable and disable Do Not Disturb using the feature code:

1 Pick up the handset and press Feature + 446.
2 Hang up. Your telephone is now in Do Not Disturb mode. The display
panel on a 3Com Telephone shows DO NOT DISTURB.

3 To disable Do Not Disturb mode, repeat steps 1 and 2. The DO NOT

DISTURB message disappears from the display panel.
To view your current Do Not Disturb setting even if you do not have a
3Com Telephone or if you are away from your desk, log in to NBX
NetSet > User Information > Feature Settings.
Preventing To prevent others from dialing long-distance or other unauthorized calls

Unauthorized Use from your telephone permanently, ask your administrator to adjust the
of Your Telephone call permissions schedule for your extension, or you can adjust it
temporarily with the Telephone Locking feature.
Telephone Locking To enable and disable the Locking feature using the feature code:
1 Pick up the handset and press Feature + 432. The display panel on a
3Com Telephone prompts you to enter your password.
2 Enter your password + # and hang up.
Your telephone is now locked. The display panel shows the Lock icon. It
displays only the directory and system-wide speed dials.
3 To turn off this feature, repeat steps 1 and 2. The Lock icon disappears.
Your call logs and personal speed dials are again available.
Additional Notes
■ When Telephone Locking is activated, a person using your telephone
can dial only toll-free calls, calls to emergency services (such as 911 in
the United States), or calls to telephone numbers that have been
programmed in your system as “internal” calls.
■ Even when Telephone Locking is active on your telephone, your
off-site notification choices remain in effect. That is, notification of
voice mail messages is sent to the outside telephone numbers or
paging numbers that you have specified in NBX NetSet > NBX
Messaging > Off-Site Notification, even if these numbers are not
toll-free.
■ You can view your current Telephone Lock setting by logging in to
NBX NetSet > User Information > Feature Settings.

Class of Service Override 75
Call Permissions Your administrator establishes Call Permissions to control the types of
calls that can be dialed from your telephone. The administrator can
configure these permissions to change depending on the time of day. For
example, your administrator can prevent long-distance calls from being
dialed from your telephone outside of business hours.
To view your current call permissions, log in to NBX NetSet > User
Information > Call Permissions.
Class of Service The Class of Service Override feature allows you to apply the features
Override of your own 3Com Telephone temporarily to another 3Com Telephone
on the same local network.
Example:
■ The telephone in your organization’s conference room is configured so
that long-distance telephone calls cannot be dialed from it. You may,
however, need to place a long-distance call during a meeting. Using
the Class of Service Override feature, you can apply the features of
your own telephone to the conference room telephone for one call
only and dial the call, assuming that your Call Permissions allow you
to make long-distance calls from your own telephone.

instructions.
To activate the one-call-only Class of Service Override from a 3Com

Telephone:
1 Pick up the handset.
3 Dial your telephone extension and press #.
4 Dial your voice mailbox password and press #.
5 When you hear the dial tone, you can dial the call in the same way that
you do from your own 3Com Telephone.
When you use Class of Service (CoS) Override, any reports that are
generated on the NBX system indicate that the CoS features of your own
3Com Telephone were applied temporarily to the telephone on which
you made the call.

Using a Headset You can use a headset that has a microphone with any telephone on an
NBX system.
■ For how to use a typical headset and amplifier with 3Com Telephones
other than the 3Com Manager’s Telephone or 3102 Business
Telephone, see “General Headset Instructions” later in this section.
■ For how to connect and use a headset with the 3Com Manager’s
Telephone and 3102 Business Telephone, read the next section.
With the 3Com The 3Com Manager’s Telephone and 3Com 3102 Business Telephone
Manager’s Telephone have a headset jack located on the underside of the telephone on the left
and 3Com 3102 side.
Business Telephone
To prepare the headset for all calls on the 3Com Manager’s Telephone
and 3102 Business Telephone:
1 Plug the headset connector into the headset jack on the underside of the
telephone. See Figure 12 in Appendix A for the location of the jack.
2 Press the Headset button. By default, this is the Access button just below
the (Program) button at the top right corner of the telephone.
3 Verify that the indicator light beside the Headset button turns on.
To answer a call when you are using the headset:

1 Put the headset on. When a call comes in, press the System Appearance
button beside the flashing light. You are connected to the call.
The handset can be either on hook or off hook.
To end a call when you are using the headset, press the Release button
on the telephone. By default, the Release button is located at the
bottom of the right column of Access buttons.
To configure a 3102 Business Telephone to ring through the headset and

not on the telephone, set the ringer tone to Silent Ring. See “Ringer
Tones” on page 64.
General Headset For 3Com Telephones other than the 3Com Manager’s Telephone or
Instructions 3102 Business Telephone, follow these instructions.
You may need to modify some of these instructions for some headsets or
amplifiers. See the instructions that come with your equipment.

Using a Headset 77
To prepare a headset for all calls:

1 Insert the cord for the headset amplifier into the handset cord receptacle
on the underside of the telephone.
2 Insert the cord for the telephone handset into the headset amplifier.
3 Put on the headset.
4 Pick up the telephone handset and set it on your desk.
To prepare a headset so that you can choose either the handset or the
headset for each call:
1 Insert the cord for the headset amplifier into the handset cord receptacle
on the underside of the telephone.
2 Insert both the headset cord and the handset cord into the headset
amplifier.
3 For headset calls: Lift the handset off the telephone and leave it off. Use
the headset microphone and earphones.
Even when the headset is plugged into the amplifier, you must remove
the handset from the cradle to use the headset.
4 For handset calls: Press the button on the headset amplifier that turns
the headset off, pick up the handset, and speak into it.
To manage calls when you are using the headset:

1 Put the headset on. When a call comes in:
■ If the handset is on hook, pick it up, set it on your desk, and begin to
speak.
■ If the handset is off hook, press the System Appearance button beside
the flashing light.
2 To end a call when you are using a headset:
■ On a 3Com Business Telephone, press the Release button, depress
the hook switch, or hang up the handset.
Returning to the Certain brands of headsets enter a power-saving mode that prevents the
Headset After a telephone from ringing for one or more calls when both of these
Long Delay circumstances are true:
■ The headset amplifier buttons for Mute and On are both set to On.
■ The handset is off the phone for a long time (for instance, overnight).

It may take a few minutes for your headset to return from the
power-saving mode to the active mode when calls first come in, so your
telephone may not ring until the headset has returned to active mode,
and you may miss a call.
If you plan to not use the headset for a long time (for instance,
overnight), 3Com recommends that you set the mute and headset
buttons on the amplifier to Off and hang up the handset on your
telephone. When you are ready to receive calls again, set up the headset
for receiving calls:
1 Pick up the handset on your telephone and set it on your desk.
2 Put on the headset. On the amplifier, set the headset button to On.
Using Hands Free You can use your phone as an intercom. You can answer internal
Active on Intercom (intercom) calls without picking up the handset. When you receive an
internal call, your telephone sounds a tone and activates the speaker
phone.
telephone as usual.
To enable Hands Free Active on Intercom, press the Hands Free or the
button before calls come in to your telephone. When the feature is
enabled, the indicator is lit. To disable Hands Free Active on Intercom,
press the Hands Free or the button again.
Palm Integration (3Com 2102-IR Business Telephone only) — The infrared port on the
front edge of the 3Com 2102-IR Business Telephone receives infrared
signals from a hand-held device that runs the Palm operating system. You
can use your hand-held device to call numbers in its directory and to
perform standard telephone operations, such as Forward, Redial, and
Transfer.
Install the Palm Dialer software (available on the NBX Resource Pack CD)
on your hand-held device. See your administrator for details.

GETTING MORE FROM YOUR
7 TELEPHONE SYSTEM

■ Listening to Your Messages in Your E-mail
■ Account (Billing) Codes
■ Caller ID
■ Call Pickup
■ Automatic Call Distribution Groups, Hunt Groups, and Calling Groups
■ Supervisory Monitoring
■ Call Park
■ Paging
■ Configurable Operators
■ Using Message Waiting Indicator to Telephone
■ Dialing a Call to a Remote Office
■ Bridged Extensions
■ Delayed Ringing
■ Using Pulse Dialing
■ Additional Applications
Security Note: Several of the features described in this chapter include

configuring a telephone line to appear on more than one 3Com®
Business Telephone or 3Com Manager’s Telephone. For any of these
features, if one person is using a telephone line, no one else can listen in
on that same line from a different telephone.
If your system uses a messaging application other than NBX® Messaging,

instructions in this chapter.

80 CHAPTER 7: GETTING MORE FROM YOUR TELEPHONE SYSTEM
NBX Feature Codes Guide in the NBX NetSet™ utility. For how to set up
your NBX NetSet utility password the first time, see Chapter 1.
Listening to Your You can listen to your voice mail from any computer that allows you to
Messages in Your access your e-mail. Your e-mail software application must be IMAP-4
E-mail compliant, such as Microsoft Outlook. See your administrator for
assistance with this feature.
If you configure your first off-site notification method to send you an

e-mail message when you have voice messages, the NBX system sends
each voice mail message as a sound-file attachment to an e-mail
message. To listen to your messages using your computer, it must have a
sound device such as a USB headset or a sound card with either speakers
or headphones.
When you delete the e-mail message that contains the attached voice
message, you are not deleting the voice message on the NBX system. To
delete voice messages from the NBX system, you must access your voice
mailbox through the telephone or the NBX NetSet utility.
See “Off-Site Notification” in Chapter 6 for a discussion of off-site

notification behavior.
Account (Billing) Account Codes allow your administrator to track calls that are associated
Codes with an individual client or account. When you dial a call or when you
answer your telephone, you dial a numeric account code that allows the
NBX system to track time spent on the telephone with a client, perhaps to
be associated with a billable account.
You may be forced to enter an account code for outgoing external calls.
See NetSet > Personal Settings > User Information > Call
Permissions to see if you are forced to enter an account code. See
NetSet > Personal Settings > Account Codes for a list of public
account codes.

Caller ID 81
To enter an account code for an outgoing external call:

1 Dial the phone number.
If an account code is required on a 3Com Entry Telephone or analog
telephone, you hear silence as the system waits for the required account
code.
If an account code is required on a 3Com Business, Basic, or Manager’s
Telephone, the display panel prompts you for the required account code.
2 Press the # key.
3 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and completes the call:
■ The account name, if known, displays. If the account code is incorrect,
you are prompted to enter it again.
■ On a 3Com Entry Telephone or analog telephone, if the account code
is incorrect you may have to dial the phone number, press #, dial the
correct account code, and press # again.
To enter an account code at any time before or during an incoming or

outgoing call:
2 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and applies it to:
■ The next call, if you activate the Account Codes feature before a call
arrives at your telephone
■ The current call, if you activate the Account Codes feature during a
call
Caller ID Your administrator can set up your NBX system to allow for Internal and
External Caller ID or can configure the system so that you can block your
identity (telephone number) from anyone you call.
Internal and External By default, the NBX system shows the extension and name of any internal
Caller ID caller on the display panel of your 3Com Telephone.

External Caller ID provides the same information for external incoming

calls if your organization subscribes to the service from your local
telephone company and if the caller has not blocked the information
from being sent to the NBX system.
Availability and service charges for External Caller ID vary by location.
Calling Line Identity On certain NBX systems, if your organization subscribes to Caller ID
Restriction (CLIR) service from your local telephone company, you can choose to prevent
the NBX system from transmitting your Caller ID information to outside
parties when you dial a call. Your administrator must enable this feature,
called Calling Line Identity Restriction (CLIR), on the NBX system. If this
feature is enabled system-wide, you can choose to restrict calls:
■ For all external (outbound) calls that you dial
OR
■ For only the next single external (outbound) call that you dial
Your administrator can configure your system so that CLIR is always

active, in which case you cannot change the CLIR settings on your
telephone to override this option.
CLIR for All External Calls

To enable CLIR-All for all calls from your telephone:
1 Pick up the handset, and press Feature + 889. The display panel on your
3Com Telephone shows CLIR-ALL on.
2 Dial the number that you want to call.
The NBX system does not send caller ID information on this call or any
future calls until you disable this feature.
To disable CLIR-All:
2 Press Feature + 889 again. CLIR-ALL off appears briefly in the display
panel and then disappears when you hang up the handset.
To view your current CLIR-All setting, log in to NBX NetSet >

User Information > Feature Settings.

Call Pickup 83
CLIR for Next External Call Only

To enable CLIR for only the next call from your telephone:
2 Press Feature + 890. The telephone display panel shows CLIR-NEXT on.
3 Dial the number that you want to call.
4 When you disconnect the call, the CLIR feature is no longer in effect.
CLIR-NEXT on disappears from the display panel.
If you hang up the handset without making a call, the CLIR-NEXT feature
remains active and will apply to the next external call that you make. If
you are unsure about whether CLIR-NEXT is active, pick up the handset,
press Feature + 890, and read the status message in the display panel of
your telephone.
Call Pickup Use the Call Pickup feature to answer a call that is ringing on another
telephone. This feature is best arranged in advance when you and
another user know that it would be convenient or necessary to answer
calls ringing on that user’s telephone.
You can answer a call that is ringing on another telephone only if you and
that user both are members of the same Call Pickup group or if that user
is a member of a Call Pickup group that allows “nonmember pickup.”
Your administrator configures call pickup groups and can tell you which
group you belong to.
To view the list of Call Pickup groups of which you are a member:
1 Log in to NBX NetSet > User Information > Call Pickup.
2 Select the group number that you want to view from the Group List, and
click Details to list the members of that group.
Directed Call Pickup You can answer a call that is ringing on a specific user’s telephone.
on a Specific
Telephone Using the feature code:
2 Press Feature + 455 and the user’s extension. The call is directed to your
telephone.

Using One-Touch Pickup:

2 Press the Access button that your administrator has assigned to Pickup
Ext.
3 Dial the extension number of the ringing telephone.
Group Call Pickup You can answer a call that is ringing on a group member’s telephone.
Using the feature code:

2 Press Feature + 456 and the group number. The call is directed to your
telephone.
Using One-Touch Pickup:

2 Press the Access button that your administrator has assigned to Pickup
Group.
3 Dial the group number.
Automatic Call Your administrator can establish formal and informal call centers so that
Distribution incoming calls can be directed to several telephones that have been
Groups, Hunt associated into automatic call distribution groups, hunt groups, or calling
Groups, and Calling groups.
Groups A call center is a general term that refers to any system that accepts
incoming calls to a site and ensures that those calls are sent to the proper
destination within the site. The call center can be used, for example, as a
help desk, a reservations counter, an information hotline, or a customer
service center.
If you do not answer, calls that come in to your telephone:

■ Through your extension go to the call coverage point that you have
set up.
■ Through an automatic call distribution group, hunt group, or calling
group follow the call coverage path set up by the administrator for
that group.

Automatic Call Automatic Call Distribution (ACD) distributes calls to agents and queues
Distribution the calls that have not been answered before a predetermined time
expires. The ACD also manages prerecorded announcements to callers,
manages individual ACD agents and groups of agents, and provides
database reports on both calls and agents.
Calls coming into ACD are distributed according to rules configured by

the administrator. An agent becomes available to receive ACD calls by
logging in to the ACD group.
To log in to an ACD group using your 3Com Telephone:

2 Press Feature + the feature code for the ACD group. Your administrator
can tell you which feature code to use.
3 Dial the ACD group password. Your administrator can tell you which
password to use.
4 Press # and hang up.
To log out of an ACD group using your 3Com Telephone:

2 Press Feature + the feature code for the ACD group.
3 Dial the ACD group password.
4 Press # and hang up.
Your administrator can configure an ACD group to an Access button. To

log in to or to log out of the ACD group, press the specified Access
button. The indicator next to the button lights to show that you are
logged in. Your administrator can configure whether you are allowed to
log out or not.
To log in to an ACD group using the NBX NetSet utility:

1 Log in to NBX NetSet > User Information > ACD Groups.
2 Select the ACD group to log in to.
3 Click Log In, and then click Close.
If you log in to an ACD group and do not answer a call when it rings on
your telephone, the system may log you out of the group depending on
how the administrator has configured the group.

To log out of an ACD group using the NBX NetSet utility:

1 Log in to NBX NetSet > User Information > ACD Groups.
2 Select the ACD group to log out of.
3 Click Log Out, and then click Close.
Viewing ACD User Status

NBX NetSet > User Information > ACD Groups shows each ACD
group that you are a member of. Click each column heading to arrange
the information in ascending or descending order.
■ Ext. — Shows the extension number of the ACD group.
■ ACD Group Name — Shows the name of the ACD group.
■ Queue — Shows the number of calls to this ACD group currently in
the queue.
■ Answered — Shows the number of calls that have been answered by
this ACD group since NBX system startup.
■ Status — Shows whether you are currently logged in or out of the
ACD group.
■ State — Shows whether your extension has been locked in to the
ACD group. If your extension has been locked into the ACD group,
only the administrator can log you out. If your extension is not locked
into the ACD group, you can log yourself out.
You can also perform the following actions:

■ Select All — Select for an action all ACD groups of which you are a
member.
■ Log In — Log in to the selected ACD group (or groups).
■ Log Out — Log out from the selected ACD group (or groups).
■ Detail — Opens the ACD Groups - Status Details screen, which
provides information about a selected group.
Viewing ACD Group Status Details

Click Detail in NBX NetSet > User Information > ACD Groups to
show more detailed information about the agents of this ACD group.
Click each column heading to arrange the information in ascending or
descending order.

■ Ext. — Shows the extension number of each agent in the group

■ First Name — Shows the first name of each agent
■ Last Name — Shows the last name of each agent
■ Rank — Shows the order in which calls are routed to agents in the
group
■ Status — Shows whether each agent is currently logged in or out of
the ACD group
■ State — Shows which agents’ extensions have been locked in to the
ACD group
Hunt Groups Incoming calls ring to one member of the hunt group. If that member’s
telephone is in use, or if that member does not answer the call, the
system “hunts” for another member of the group until the call is
answered or is forwarded to the group call coverage point. For example,
if there are no available members of the hunt group, the call might be
forwarded to a group mailbox or to the receptionist. Figure 5 shows the
path of a call coming into a hunt group.
Figure 5 Sample Hunt Group Configuration
1 Incoming Telephone Call

2 Telephone #1
3 Telephone #2
4 Telephone #3
5 Group Voice Mailbox

Hunt groups can be static or dynamic:

■ If you are in a static hunt group, you are always part of that group
along with the other group members.
■ If you are in a dynamic hunt group, you must log in to the group to be
part of it.
To log in to a dynamic hunt group using your 3Com Telephone:

2 Press Feature + the feature code for the hunt group. Your administrator
can tell you which feature code to use.
3 Dial the hunt group password and press #. Your administrator can tell you
which password to use.
To log out of a dynamic hunt group using your 3Com Telephone:

2 Press Feature + the feature code for the hunt group.
3 Dial the hunt group password.
4 Hang up the telephone.
Your administrator can configure a hunt group to an Access button. To

log in to or to log out of the hunt group, press the specified Access
button. The indicator next to the button lights to show that you are
logged in.
To log in to a dynamic hunt group using the NBX NetSet utility:

1 Log in to NBX NetSet > Hunt Groups.
2 Select the hunt group to which you want to log in.
3 Click Log In, and then click Close.
If you log in to a dynamic hunt group and do not answer a call when it
rings on your telephone, the system may log you out of the group
depending on how the administrator has configured the group.
To log out of a dynamic hunt group using the NBX NetSet utility:
2 Select the hunt group from which you want to log out.
3 Click Log Out, and then click Close.

To log in to all hunt groups of which you are a member:

2 Click the Login all button.
To log out of all hunt groups of which you are a member:

2 Click the Logout all button.
Calling Groups One type of hunt group is the Calling Group. Calling groups allow an
incoming call to ring simultaneously on all telephones in a group, for
example, a customer service group. To log in to or out of a calling group,
follow the steps in “Hunt Groups” earlier in this chapter.
Figure 6 shows the path of a call coming in to a calling group.
Figure 6 Sample Calling Group Configuration
1 Incoming Telephone Call

2 Telephone #1
3 Telephone #2
4 Telephone #3
5 After a specified number of rings with no answer
6 Receptionist
Group Membership To view the list of users that belong to a group:

1 In NBX NetSet > User Information > Hunt Groups, select a group.
2 Click Details.

Supervisory Supervisory monitoring is typically used in call centers to allow supervisors

Monitoring to join a conversation between an agent and a customer to ensure proper
customer support. The supervisor’s presence may or may not be
announced to the agent or customer by a tone. Supervisory monitoring
can be used only with incoming calls to Automatic Call Distribution
Groups and Hunt Groups. Other calls to and from the agent’s telephone
are unavailable to the supervisor. The supervisor must provide a password
to access the agent’s extension during these calls.
Your organization may be legally required to add an announcement to

tell callers that their call may be monitored.
Agents — must be logged in as members of an ACD or Hunt Group.

Anyone, however, who picks up a call that comes through an ACD or
Hunt Group may be monitored like an agent. This includes people who
take a transferred call or answer one with call pickup.
Supervisors — are people using the supervisory monitoring password to

monitor the ACD or Hunt Group. A call could be forwarded through
more than one group; the supervisor must provide the password of the
most recent group. The supervisor must use a 3Com Telephone with a
display panel and appropriate soft buttons, not a 3Com Entry Telephone,
3Com Cordless Telephone, 3Com 2101 Basic Telephone, or an analog
telephone.
Customers — are people who make an incoming call to an ACD or Hunt

Group number. It can be an internal or external caller.
Monitor — allows the supervisor to listen to a call.
Whisper — allows the monitoring supervisor to speak to the agent

without the customer hearing.
Barge-In — allows the supervisor to speak to both the agent and the
customer.
Monitor Monitor (also called Silent Monitor) allows an authorized supervisor to

listen to calls that come in to an agent through an ACD or Hunt Group.
The administrator configures the NBX system to specify whether a tone
audible to the agent plays when the supervisor joins to monitor the call.

Supervisory Monitoring 91
To monitor an agent’s ACD or Hunt Group call:

2 Press Feature + 425. Or press the Access Button if one is configured for
Monitor.
The display panel prompts you for the ACD or Hunt Group extension
number.
3 Enter the ACD or Hunt Group extension number. Press the OK soft
button or press #.
The display panel prompts you for the supervisory monitoring password
for that ACD or Hunt Group.
4 Enter the password. Press OK or #.
The display panel prompts for the extension number of the agent.
5 Enter the extension number. Press OK or #.
■ You join the call, either silently or with a tone announcing the call to
the agent depending on system configuration.
■ Your display panel now shows options to Whisper, Change Agent,
or Barge-In.
■ Only the supervisor’s display panel indicates that supervisory
monitoring is in use.
Whisper Whisper (also called Coaching) allows a supervisor to speak to the agent
during a monitored call without the customer hearing this advice. The
administrator configures the NBX system to specify if a tone audible to
the agent is played when the supervisor enables Whisper.
To use Whisper or Barge-In, a supervisor must first be monitoring the call.
To whisper to an agent:
1 Monitor the ACD or Hunt Group call.
2 Press the soft button to select Whisper from the display panel.
■ Whisper is enabled for you, either silently or with a tone announcing
the change, depending on system configuration.
■ Your display panel now provides options to Monitor, Change Agent,
or Barge-In.

Barge-In Barge-In allows a supervisor to speak to both the agent and customer
during a monitored call. The administrator configures the NBX system to
specify whether a tone audible to the agent and customer is played when
the supervisor enables Barge-In.
To use Whisper or Barge-In, a supervisor must first be monitoring the call.
To barge in to a call:
2 Press the soft button to select Barge-In from the display panel.
■ Barge-In is enabled for you, either silently or with a tone announcing
the change, depending on system configuration.
■ Your display panel now provides options to Monitor, Change Agent,
or Whisper.
Change Agent While supervisory monitoring is enabled on a call, a supervisor can

change the agent being monitored.
To monitor a different agent in the same ACD or Hunt Group:

2 Press the soft button to select Change Agent.
The display panel prompts you for the extension number of the agent.
3 Enter the extension number of the agent and select OK or press #.
■ You begin to monitor the call, either silently or with a tone
announcing the call to the agent depending on system configuration.
■ Your display panel now provides options to Whisper, Change Agent,
or Barge-In.
Interactions ■ A supervisor can monitor a call, put it on hold, and monitor a second
call. A supervisor can invoke supervisory monitoring on only two calls
(one active and one on hold) at a time.
■ If a customer or agent conferences in an additional caller, or transfers,
parks, or sends a call to voice mail, a supervisor monitoring the call is
dropped from the call.

Call Park 93
■ If a customer or agent puts a call on hold before a supervisor attempts

to monitor it, the supervisor will not be able to monitor the call. If a
customer or agent puts a call on hold after a supervisor is monitoring
it, the supervisor will not be dropped from the call.
Call Park Use Call Park to place a call in a “holding pattern” and make it available
for another person to pick up from any telephone on the system. Use the
internal paging feature, the external paging feature, or both, to
announce the call. The recipient can retrieve the call from any 3Com
Telephone or analog telephone by dialing the Call Park extension that you
give during your announcement.
This feature is useful in any of these circumstances:

■ The recipient is elsewhere in the building.
■ You want to continue a call on another telephone, for instance, in a
conference room for privacy, and transferring the call does not give
you enough time to retrieve it.
When you park a call, you assign it a Call Park extension, which anyone
can use to retrieve it. Table 7 lists the default Call Park extension
numbers. Ask your administrator to verify the Call Park extensions for
your location.
Table 7 Default Call Park Extension Numbers
System Default Extension Numbers

4-digit dial plan 6000 – 6099
3-digit dial plan 601 – 609
If the call is not answered within 5 minutes (default) after it is parked, it

rings again at the original telephone. Your administrator can modify the
length of this waiting period.
To park a call:
1 While you are on a call, press Feature + 444. Or press the Access button
assigned to Call Park.
2 Dial a Call Park extension from the list shown in Table 7 or the list of
extensions at your location.

If you select a Call Park extension that is already in use, Park Cancelled
appears on the display panel on your 3Com Telephone, and the call rings
back to your telephone. Try another Call Park extension.
To notify another user about the parked call:

■ From 3Com Business Telephones, select an Access button that is
assigned for placing telephone calls, and dial the user’s extension,
or use the paging feature. See “Paging” next for details.
To retrieve a parked call:

1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Paging Paging is the general term used to describe the act of broadcasting a
voice message through audio speakers.
You can:
■ Page all extensions with speakers on the system
This method uses default codes in Table 8.
■ Page a subset of all extensions on the system, called a zone.
This method uses extensions that the administrator configures for this
purpose.
Each method allows you to broadcast a message to different destinations,

depending on your location and equipment.
Do not press the Feature button before you dial the Paging code.

Paging 95
Paging the System When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in Table 8, have default values
for each destination.
Table 8 Paging Codes
3-digit dial plan 4-digit dial plan

Feature (default codes) (default codes)
External Paging 620 6200
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker system
that is connected to your NBX system
Internal Paging 621 6201
Broadcast an announcement through
the speakers on all NBX Telephones
with speakers on your system except
those that have been set to Do Not
Disturb.
Simultaneous Paging 622 6202
Broadcast an announcement externally
and internally at the same time.
To page, perform the following steps using your 3Com Telephone:

2 Dial the appropriate paging code on your system.
3 Speak the broadcast message into your handset and hang up.
Paging Zones A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
system, or both the zone and the P.A. system simultaneously. Zone
extensions are configured by the administrator.
To discover the page zone extensions on your system:

1 Log in to NBX NetSet > Personal Information > User Information >
Page Zones.
The NetSet utility lists the existing page zones and their extension
numbers.
2 Click Details to list the members of each zone.

You can view zone memberships only if the administrator authorizes you
to do so.
To page a zone, a P.A. system, or both, perform the following steps using
your 3Com Telephone:
2 Dial the appropriate extension to page the zone.
3 Speak the broadcast message into your handset.
4 Hang up.
3Com Cordless Telephones, 3Com Entry Telephones, and analog

telephones can initiate but cannot receive a zone page.
Configurable The Configurable Operators feature gives a caller who is directed to voice
Operators mail the option of going to another destination.
You can configure your own operators for those who call your extension
(if the administrator allows it), and you can also use this feature as a caller
to another device.
How Configurable Following is a brief description of how the system directs a caller from
Operators Work your voice mail to operators that you designate:
1 If you do not answer a call, the system invokes your voice mail.
2 The caller listens to your prerecorded voice mail message, which includes
the instruction to press an access digit (0 or 9) in order to reach the
appropriate operator.
When you employ a configurable operator, you must re-record your
personal voice mail greeting to tell callers that an operator is available to
them if they press the appropriate access digit during the voice mail
greeting.
3 The caller presses 0 or 9.
4 The call is redirected to the operator that you designated.
The caller can leave a message, and then press 0 or 9 to transfer to a
configured operator.

Configurable Operators 97
Configuring the You can view the operators’ settings, and modify those settings if your
Operators administrator allows it.
The operator’s call-handling rules (such as call coverage) may apply to the
voice mail caller. Also, you must have external-to-external permissions in
order for transfers to external phone numbers to complete successfully.
If you or the administrator do not configure operator destinations, the

system directs an operator-bound caller to extension 501.
Viewing Your Operator Permissions

To find out if you have permission to configure operators:
1 Log on to NetSet > User Information > Call Permissions.
Your current permissions to configure the System Operator and the
Personal Operator appear in the User Information window.
Configuring the Operator Destinations

To configure your own destinations for System and Personal Operator:
1 Log on to NetSet > NBX Messaging > Personal Operators.
The current System Operator and Personal Operator extensions and
access digits appear. If the administrator has given you the appropriate
configuration permissions, the extensions appear in editable text boxes.
2 Edit the destinations to include the appropriate extensions.
The operator destination text string cannot exceed 16 characters.
3 Click Apply to make the changes and keep this screen open, or click OK
to make the changes and close the screen.
If you clear an operator destination (using the Clear check box), calls
directed to that operator are directed instead to the default system
operator (extension 501).

Using Message The Message Waiting Indicator (MWI) to Telephone allows a user to light
Waiting Indicator to a status button next to a programmable access button and leave a call
Telephone back number on another telephone. This feature is distinct from voice
mail in that the telephone does not ring and there is no voice mail
message. The light appears next to the Access button, not the message
waiting light used for voice mail. Example: A principal can use this
feature to notify a teacher, without interrupting the class, to call the
office as soon as possible.
Sending an MWI You can send an MWI message to any telephone on your NBX system
Message that has an MWI Retrieve button enabled. Sending an MWI message
turns on the light on the target telephone if it is not already lit, and leaves
your telephone number as a callback number.
You cannot send an MWI message to:

■ Telephones that do not have an MWI Retrieve button enabled or that
have reached their MWI message limit (30)
■ Remote NBX systems over external line
■ Calling Groups, Hunt Groups, or ACD Groups
To send an MWI message:

1 Pick up the handset, and press Feature + 412. Or press the MWI to Ph
Send access button. The display panel on your 3Com Telephone shows
Send MWI To:.
2 Dial the extension that you want to call and press #.
3 The display panel on your 3Com Telephone shows Success.
Retrieving an MWI To receive and retrieve an MWI message, you must have a 3Com
Message Telephone with a display panel and a programmable access button with
status light configured (by your administrator) for MWI Retrieve. Your
administrator can also configure additional buttons for MWI To Ph Send
and MWI Cancel.
An analog telephone cannot receive an MWI message.
When the light is lit on your telephone, you can press the MWI Retrieve
button, scroll through your display panel to see the caller ID, and return
the call. When you press the MWI Retrieve button, you turn off the MWI
light. You may still have one or more calls in a list to return.

Using Message Waiting Indicator to Telephone 99
To retrieve an MWI number:

1 Pick up the handset and press the MWI Retrieve access button. The
display panel shows the total number of MWI messages and the number
of new MWI messages on your list.
2 Scroll down the display panel to see the extension for the most recent
MWI sender. The most recent call is at the top of the list.
3 Press the Call soft button to call the sender.
You can also retrieve an MWI message with Feature + 414.
Deleting MWI Press the MWI Retrieve button to turn off the MWI light until you receive
Messages another MWI message. It does not delete the MWI message. Messages
remain in your list until you explicitly delete them or until the NBX system
is rebooted. Your telephone can store a maximum of 30 MWI messages.
When it is full, it will reject new messages, so be sure to delete unneeded
messages.
To delete all MWI messages:

1 Press the MWI Retrieve access button. The display panel shows the
number of MWI messages on your list and the options to Delete All or
Exit.
2 Press the Delete All soft button.
3 The display panel asks you to confirm the delete of the whole MWI list.
Press the Yes soft button.
To delete a single MWI message:

1 Press the MWI Retrieve access button. The display panel shows how many
MWI messages are on your list.
2 Scroll down the display panel to see the MWI message you want to
delete.
3 Press the Delete soft button.
4 The display panel asks you to confirm the delete of the entry. Press the
Yes soft button.
Cancelling an MWI After you have sent an MWI message, you can cancel it and remove it
Message from the list on the target telephone. If it is the only unattended MWI
message on the target telephone, cancelling it turns off the MWI light.

You can cancel an MWI message only from the same extension from
which you sent the MWI message.
To cancel an MWI message:

1 Pick up the handset and press Feature + 413. Or press the MWI Cancel
access button. The display panel on your 3Com Telephone shows Cancel
MWI To:.
2 Dial the extension to which you sent the MWI message that you want to
cancel and press #.
3 The display panel on your 3Com Telephone shows Cancel Sent.
Dialing a Call to a You can dial calls between sites in your organization that are separated
Remote Office geographically but that are linked by a Wide Area Network (WAN)
connection. Each site must have an NBX system. Typical configurations
are described in the next sections.
Using Unique In the sample network shown in Figure 7, everyone in the entire
Extensions organization has a unique telephone extension. Whenever you make a
call to an extension that is not located at your own site, your NBX system
sets up a connection to the NBX system at the other extension’s site.
In this example, to call a user in Dallas, a user in Chicago dials a Dallas

extension (3000 through 3999). The dial plan on the Chicago NBX system
sets up the necessary connection to the Dallas NBX system and then to
the extension at that site.

Dialing a Call to a Remote Office 101
Figure 7 Using Unique Extensions to Dial Remote Offices
1 2 3
1 NBX System in Chicago

Extensions: 1000–1999
2 Wide Area Network (WAN)
3 NBX System in Atlanta
4 NBX System in Dallas
Using Site Codes If some users have overlapping telephone extensions, your administrator
can configure your telephone system to use site codes for you to dial
people at remote offices. Your administrator chooses the site codes for
your system. In this example, you dial a site code first, followed by the
extension at the site.
For example, as shown in Figure 8, to call someone in Atlanta, a user in

Chicago dials the site code 62 and then the appropriate extension (1000
through 3999). To reach a user in Dallas, a user in Chicago dials 63 and
then the appropriate extension (1000 through 3999). The site code
prevents conflicts between the remote extension number and a
duplicated extension number at the local site (Chicago).

Figure 8 Using Site Codes to Dial Remote Offices
1 2 3
1 NBX System in Chicago

Site Code: 61
2 Wide Area Network (WAN)
3 NBX System in Atlanta
Site Code: 62
4 NBX System in Dallas
Site Code: 63
Bridged Extensions With a bridged extension, buttons and status lights on one telephone are
associated with buttons and status lights on another telephone. On the
primary telephone, you can perform all operations (such as dialing
telephone calls, placing calls on hold, forwarding calls, and so on). On the
secondary telephone, you can answer calls that are made to the primary
telephone’s extension but you cannot make calls using the buttons that
are associated with the primary telephone.
The administrator can create bridged extensions on:

■ Any 3Com Manager’s Telephone
■ Any 3Com Business Telephone
■ A 3Com 2101 Basic Telephone if a 3Com Attendant Console is
associated with it. The administrator creates the bridged extension on
the Attendant Console.

Delayed Ringing 103
Example:
If an assistant’s job is to answer a manager’s telephone calls, the
administrator can map the manager’s extension on the assistant’s
telephone. The manager’s telephone is the primary telephone, and the
assistant’s telephone is the secondary telephone.
Your administrator can map a primary telephone’s extension to one or

more secondary telephones.
Delayed Ringing (3Com Business Telephone, 3Com Manager’s Telephone, and

Attendant Console only) The Delayed Ringing feature prevents a call
on a shared line from ringing on a specific telephone until the incoming
call rings on another telephone for a specified number of times.
A shared line can be a bridged extension or an incoming analog

telephone line that is mapped to more than one telephone.
Example:
The administrator programs (maps) a telephone extension to appear on
both a manager’s telephone and the assistant’s telephone; that is, it is a
bridged extension. The administrator has also enabled the Delayed
Ringing feature on the manager’s telephone and has specified 4 rings (a
typical setting).
When a call comes in to the manager on that extension, the assistant’s

telephone rings 4 times before the call audibly rings on the manager’s
telephone. Even during the first silent rings, the line’s status light on the
manager’s telephone flashes, allowing the manager to answer the call if
required.
Using Pulse Dialing In some locations, analog telephone users must dial telephone calls using
pulse dialing instead of tone dialing (also called Dual Tone Multi
Frequency, or DTMF, dialing).
Your administrator must configure the Analog Line Card ports for pulse
dialing.

Examples:
■ Some of your telephone lines are provided by a telephone company
that supports only pulse dialing while other lines are provided by a
different telephone company that supports DTMF dialing.
■ Your organization’s telephone service provider offers low-cost,
pulse-dialing-only service.
■ In some situations, you must switch to DTMF dialing during a call. For
example, if your call is answered by an automated attendant that
requires that you enter information from your telephone keypad, you
must typically enter the information using DTMF dialing.
To change from pulse dialing to DTMF during a call:

2 Your connection is switched from pulse to tone (DTMF) for the remainder
of the call. When you hang up, the port you were using on the Analog
Line Card reverts to pulse dialing mode.
Your administrator can map a button on your telephone so that you can
press the button to change from pulse dialing to DTMF during a call.
When you hang up, the port that you were using on the Analog Line
Card reverts to pulse dialing mode.
You can configure a personal speed dial in the NBX NetSet utility to dial a
number in pulse dial mode and then to switch to DTMF. Use the left
angle-bracket character (<) in the NBX NetSet utility as the command to
switch to DTMF mode. You can also include the digits that you want the
system to dial after it switches to DTMF. The system dials any digits after
the < using DTMF tones. When you hang up, the port that you were
using on the Analog Line Card reverts to pulse dialing mode.
For additional information about programming speed dials, see “Personal

Speed Dials” in Chapter 6.

Additional Applications 105
Additional These software applications are available on the NBX Resource Pack CD:
Applications ■ NBX Call Reports *
■ NBX TAPI Service Provider (NBXTSP)
■ NBX Desktop Call Assistant *
■ Complement Attendant Software *
■ Palm Dialer
■ pcXset™ Soft Telephone *
■ NBX Media Driver
* Applications with a * have been tested with Windows XP Home Edition

and Windows XP Professional Edition.


FEATURE CODES
8
This chapter describes how to use feature codes with the 3Com®
Telephones. It covers these topics:
■ NBX Tones
■ Feature Codes with 3Com Telephones
■ Using Feature Codes
For help on accessing NBX® features from an analog telephone, see the
NBX Feature Codes Guide in the NBX NetSet™ utility.
NBX Tones As you use your 3Com Telephone to receive voice mail and use the
feature codes on the NBX system, you hear these tones:
■ Dial Tone — When you lift the receiver to place a call or begin using
one of the features, you hear the normal Dial Tone (except for the
circumstance described in the next bulleted item).
■ New Messages Dial Tone — When your voice mailbox has either
new or unsaved messages and you pick up your handset, you hear the
New Messages Dial Tone (a repeated short tone, also called the
“stutter” tone) until you delete or save every message. Your
administrator can turn the New Messages Dial Tone on or off.
■ Feature Entry Tone — When you lift the handset and press the
Feature button to begin using one of the features, you hear the
Feature Entry Tone, which is a steady sound at a lower pitch than the
normal dial tone. You must enter data, for instance a feature code
number, your password, or an extension, as specified in Table 9.
■ Confirmation Tone — After certain steps, as when you add a party
to a conference call, you hear a short Confirmation Tone or “beep,”
which confirms that you have completed the action.
■ Error Tone — You hear the “fast busy” tone, also called the
“congestion” tone, when no circuits are available. In addition, you

108 CHAPTER 8: FEATURE CODES
hear the Error Tone if you make an error such as trying to enter an
unsupported feature code, an invalid extension, or an invalid
password. Hang up and start the feature code sequence again.
■ Feature Active Tone — Example: You activate one of the
“persistent” features, for instance, you lock your telephone, and then
hang up. The next time that you pick up the handset on your analog
telephone, you hear the Feature Active Tone. This pair of tones, a
sound followed by a higher sound, is repeated to remind you that you
have enabled one of these features:
■ Caller ID Restriction — All
■ Do Not Disturb
■ Forward All Calls to Voice Mail (that is, to your call coverage point)
■ Lock or Unlock Your Telephone
■ Call Forward All
■ Call Forward Busy
■ Call Forward No Answer
These features are “persistent,” that is, each one remains active until
you turn it off, as described in Table 9.
If you forget which of the persistent features you have activated on
your telephone, log in to NBX NetSet > User Information > Feature
Settings. See “NBX NetSet Utility” in Chapter 1 for information on
how to log in to the NBX NetSet utility.
Exception: If you have activated one or more persistent features and your
mailbox has messages, you hear the New Messages Dial Tone whenever
you pick up the handset until you have deleted all messages.
Feature Codes with A large number of telephone features are available by pressing the
3Com Telephones Feature button on a 3Com Telephone and entering a three-digit feature
code. These feature codes are listed in Table 9.
■ If your telephone does not have a button programmed for Feature,
ask your administrator to program one.
■ Because your administrator determines whether some of the features
that are described in this chapter are available for your telephone or
for the entire system, some of these features may not be available to
you.

3Com Business Most of the features that are listed in Table 9 are available on your 3Com
Telephone Business Telephone on single-purpose buttons like Hold, Conference,
Transfer, and Message, or on Access buttons that you or your
administrator can program.
Nevertheless, you can use feature codes if you like. On Models 1102,
2102, and 2102-IR, the top Access button directly below the Program
button is programmed at the factory as the Feature button for the 3Com
Business Telephone. On Model 3102, the top Access button in the left
column of 9 buttons is programmed at the factory as the Feature button.
(Your administrator can program another button as the Feature button.)
Using Feature Follow these steps to use NBX feature codes:

Codes
2 Press the Feature button.
3 Dial the feature code and any additional values as specified in Table 9.
4 Hang up when your call is complete or you have activated the features
that you want.
Table 9 NBX Feature Codes
Feature Feature Code See

Account Codes F + 888 + account code + # + telephone “Account (Billing) Codes” in Chapter 7
number
ACD, Hunt, and Calling F + feature code for the group + group “Automatic Call Distribution Groups,
Groups password + # Hunt Groups, and Calling Groups” in
Chapter 7
Call Forward All F + 465 “Forwarding Incoming Calls” in
Chapter 5
Call Forward Busy F + 467 “Forwarding Incoming Calls” in
Chapter 5
Call Forward No Answer F + 466 “Forwarding Incoming Calls” in
Chapter 5
Call Park — Park a Call F + 444 + one of the Call Park extensions “Call Park”in Chapter 7
for your NBX system
Call Pickup — Directed F + 455 + the extension of the ringing “Call Pickup” in Chapter 7
telephone
Call Pickup — Group F + 456 + call pickup group number “Call Pickup” in Chapter 7

Table 9 NBX Feature Codes (continued)

Call Toggle F + 409 Toggles between two calls. To return to
the first call, press the button for the line
where the first call came in, press Call
Toggle (2101), or repeat F + 409.
Caller ID Restriction F + 889 “Caller ID” in Chapter 7
(CLIR — All) — On/Off
Caller ID Restriction F + 890 “Caller ID” in Chapter 7
(CLIR — Next Call)
Class of Service Override F + 433 + your own extension + # + your “Class of Service Override” in Chapter 6
password + # + the outside party’s
number
Conference Call — Drop F + 431 “Establishing a Conference Call” in
Chapter 5
Direct Mail Transfer F + 441 + other person’s extension + “Direct Mail Transfer” in Chapter 5
hang up
Do Not Disturb — On/Off F + 446 “Do Not Disturb” in Chapter 6
Flash F + 260 If your NBX system is connected to a
Central Office by one or more Analog
Line Card ports, and if the CO provides
your organization with a feature such as
Call Waiting that requires a flash signal,
use this sequence to signal the CO to
put the existing call on hold and toggle
to the call that is waiting.
To return to the first call, repeat F + 260.
Forward All Calls to F + 440 “Other Ways to Manage Your Voice
Voice Mail — On/Off Mail Messages”in Chapter 4
Hands Free — On/Off F + 100 Set your phone so that internal calls
automatically come through your
speaker. You answer directly, without
lifting the handset.
Incoming calls connect with no ring, and
the caller can immediately hear you.
Hold F + 402 “Putting a Call on Hold” in Chapter 5.
Lock Your Telephone — F + 432 + password + # “Preventing Unauthorized Use of Your
On/Off Telephone” in Chapter 6
Message Waiting Indicator F + 412 “Using Message Waiting Indicator to
to Phone — Send Telephone” in Chapter 7
to Phone — Cancel Telephone” in Chapter 7

Table 9 NBX Feature Codes (continued)

to Phone — Retrieve Telephone” in Chapter 7
Monitor, Whisper, Barge-In F + 425 “Supervisory Monitoring” in Chapter 7
Password — Set Initially F + 434 + new password + # + repeat “Setting Up Your Password and
your new password + # Voice Mail for the First Time” in
Chapter 1
Password — Change F + 434 + current password + # + new “Setting Up Your Password and
password + # + repeat your new Voice Mail for the First Time” in
password + # Chapter 1
Pulse to Tone Make or receive a call + F + 891 “Bridged Extensions” in Chapter 7
Redial F + 401 “Using the 3Com Telephone
Display Panel” in Chapter 5
Release F + 111 “Using a Headset” in Chapter 6
Show Lists F + 460 Displays lists for you to scroll through
and select.
Speaker — On/Off F + 104 Speak (except 2101 and 3101) and listen
without picking up the handset.
Speed Dial — Personal List F + personal speed dial number “Speed Dials” in Chapter 6
Speed Dial — System-Wide F + system-wide speed dial number “Speed Dials” in Chapter 6
List
Transfer F + 420 + telephone number + F + 420 “Transferring a Call” in Chapter 5
Version F + 827 Displays the NBX software version.
Volume Up or Down F + 102 to raise the sound “Setting the Volume” in Chapter 5
or
F + 103 to lower the sound


3COM 3105 AND 1105
9 ATTENDANT CONSOLES
3Com Attendant Consoles and the NBX Complement Attendant

Software (CAS) application enable a receptionist to handle high call
volumes efficiently. Although receptionists are the primary users of the
Attendant Console and CAS, the two can also be used by busy sales
representatives and others who receive a high volume of telephone calls
or who make frequent calls to the same telephone numbers.
This chapter covers these features:

■ 3Com Attendant Console — A device that works along with 3Com
Telephones to increase call handling capability. In many offices, the
Attendant Console is used by a receptionist or switchboard operator,
who is referred to in this guide as “the receptionist.”
■ Complement Attendant Software (CAS) — A software application
that allows a receptionist to answer and route calls using a personal
computer. Your administrator installs the Complement Attendant
Software on your computer from the NBX Resource Pack CD.
The Attendant Console and Complement Attendant Software can be

used at the same time. However:
■ When incoming calls appear on the Attendant Console, you must
handle them using the buttons of the console.
■ When calls appear on the CAS computer screen, you must handle
them using the mouse and the CAS software features.

114 CHAPTER 9: 3COM 3105 AND 1105 ATTENDANT CONSOLES
3Com Attendant The 3Com 3105 and 1105 Attendant Consoles each have 50 Access
Console buttons and 4 preprogrammed Feature buttons. Although the design of
the two Attendant Consoles is different, the buttons work the same way.
In effect, the Attendant Console is an extension of the 3Com Telephone
to which it is associated.
See Figure 9 for 3Com 3105 Attendant Console buttons and controls and
Figure 10 for 3Com 1105 Attendant Console buttons and controls.
Access Buttons The 50 Access buttons on a 3Com Attendant Console can each have two
sets of assignments: 1 through 50, and 51 through 100. To toggle
between the two sets of assignments, you press the Shift button.
Your administrator can assign features to each Access button. Possible

features include:
■ Status of internal telephone extensions (busy, available)
■ Status of external telephone lines
■ Speed dials for:
■ User extensions
■ Pager numbers
■ Cellular telephone numbers
■ Message Waiting Indicators (MWI) for:
■ Group mailboxes
■ Phantom or personal mailboxes
■ Time of Day Service Modes (See your administrator for details.)
■ Status of ACD, Hunt, and Calling Group lines
Feature Buttons The four Feature buttons are preprogrammed for the most common
features needed by a receptionist: Transfer, Transfer to Voicemail, Park,
and Hold. The Shift button does not affect the operation of the Feature
buttons. Your administrator can change the features assigned to each
button using the NBX NetSet utility.
Figure 9 and the text that follows it describe the features on the 3Com
3105 Attendant Console. Figure 10 and the text that follows it describe
the 3Com 1105 Attendant Console.

3Com Attendant Console 115
Figure 9 3Com 3105 Attendant Console
1 Hold button — Places a caller on hold.

2 Transfer button — Enables you to send a call to another telephone.
3 Direct Mail Transfer button — Allows you to send a caller directly to
another user’s voice mailbox or phantom mailbox.
4 Call Park button — Places a call in a “holding pattern” so that it can be
retrieved from any other telephone on the system.
5 Labels — You can print labels for your Attendant Console using the
LabelMaker utility in the NBX NetSet utility or on the NBX Resource Pack
CD.
6 Label cover tabs — Allow you to unsnap the plastic cover to insert
labels.
7 Access buttons — A light next to each button indicates whether the line
is available or in use, or whether assigned features are enabled:

Steady In use

8 Shift button — Enables you to toggle between the two sets of Access
button assignments on the Console. Press the Shift button to switch
between assignments 1 through 50 and assignments 51 through 100.
The Shift button LED is lighted when you have buttons 51 through 100
selected.
Figure 10 and the text that follows it describe the features on the 3Com
3105 Attendant Console.
Figure 10 3Com 1105 Attendant Console
SHIFT
1 Access buttons — A light next to each button indicates whether the line
is available or in use, or whether assigned features are enabled. Status
indicator lights show the following:

Steady In use
2 Shift button — Enables you to toggle between the two sets of button
assignments on the Console. Press the Shift button for assignments
1 through 50. Press Shift again for assignments 51 through 100. The
Shift button LED is lighted when you have buttons 51 through 100
selected.

Opening the 3105 Attendant Console Label Cover 117
3 Labels — You can print labels for your Attendant Console using the
LabelMaker forms in the NBX NetSet utility or on the NBX Resource Pack
CD. See “Printing Labels” in Chapter 6.
4 Transfer button — Enables you to send a call to another telephone. See
“Transferring a Call” in Chapter 5.
5 Direct Mail Transfer button — Allows you to send a caller directly to
another user’s voice mailbox or phantom mailbox. See “Direct Mail
Transfer” in Chapter 5.
6 Call Park button — Places a call in a “holding pattern” so that it can be
retrieved from any other telephone on the system. See “Call Park” in
Chapter 7.
Chapter 5.
Attendant Console To create, print, and save labels for your Attendant Console, see “Printing
Labels Labels” in Chapter 6.
Opening the 3105 After you print the labels and then cut them out, remove the plastic cover
Attendant Console from the Attendant Console by pulling up on the two tabs at the top of
Label Cover the Attendant Console until the top of the cover pops off.
Figure 11 3105 Attendant Console Label Cover Tabs

Complement The Complement Attendant Software is an optional component, which

Attendant requires a license. On your personal computer, the Complement
Software Attendant Software displays your telephone directory in a series of tabs.
Each tab sorts the directory by a different type of information, for
example, by last name, by department, or by extension.
When you answer a call using the Complement Attendant Software, you
can select a user from the directory and transfer the call to that user.
Table 10 describes the main elements of the Complement Attendant

Software screens.
Table 10 Elements of the Complement Attendant Screens
Field Purpose
Display Panel Displays Caller ID information (name and extension number),
the status of a call, and the duration of the call. The number of
calls displayed depends on the number of access lines that you
have specified in your general settings.
Find/Phone# Display Provides the extension number and name of the person
selected in the directory.
Clear Button Cancels previous criteria.
Extension Tab Sorts the data in the directory by listing the extension numbers
in ascending order.
First Tab Sorts the list of users in alphabetical order by first name.
Last Tab Sorts the list of users in alphabetical order by last name.
Department Tab Sorts the directory by the user department.
Hidden Tab Hides entries in the NBX directory that you do not want to
appear on other tabs, such as conference room phones.
Quick Tab Provides access to frequently used entries in the directory.

Complement Attendant Software 119
Table 11 describes Complement Attendant Software buttons and the

keyboard shortcuts to functions on the Action menu.
Table 11 Attendant Software Buttons and Keyboard Shortcuts
Keyboard
Button Purpose Shortcut
Answer Answers an incoming call. Alt+A
Dial Dials a selected number to place an outgoing call. Alt+D
Park Places a call in a “holding pattern” so that it can Alt+K
be retrieved from another telephone on the
system.
UnPark Releases a caller from a “holding pattern.” Alt+U
Release Terminates a call. Alt+R
Hold Places a caller on hold. Alt+H
UnHold Removes a caller from being on hold and returns Alt+N
to the call.
Transfer Forwards a call to another telephone. Alt+T
Complete Transfer Completes the transfer of a call. Alt+M
Cancel Transfer Cancels a transfer. Alt+S
Conference Establishes a single call with up to three additional Alt+C
internal or external parties.
Complete Completes the conference call. Alt+P
Conference
Cancel Conference Cancels the addition of a party to a conference Alt+E
call.
Managing Calls To manage incoming calls using the Complement Attendant Software,
click the buttons at the bottom of the screen, as described here:
1 Select a sort method by clicking the appropriate tab. For example, to
select a user by last name, click the Last tab.
2 Click the user’s name. The user’s extension number and name appear in
the Find/Phone # field.
3 Click the button for the way that you want to handle the call. For
example, to transfer a call, click Transfer. To park a call, click Park.
For additional information on using the Complement Attendant

Software, see the Help system in the software.


TELEPHONE INSTALLATION AND
A MAINTENANCE

■ Connecting the Telephone
■ Installing the 3102 Telephone Label Plate
■ Attaching and Adjusting the Articulating Support Bracket
■ Attaching and Adjusting the Fixed Support Bracket
■ Moving Your Telephone
■ Swapping Telephones
■ Cleaning Your Telephone
■ Troubleshooting Problems
Connecting the Although the connector layout varies between telephones, all 3Com
Telephone Telephones and attendant consoles use these symbols to identify the
connectors:
■ Power connection for an AC power adapter.
Network connection. Connects the device to the network. A powered
Ethernet cable that conforms to the Power over Ethernet (IEEE 802.3af)
standard is acceptable for:
■ 3Com 3100 Entry Telephones
■ 3Com 3101 Basic Telephones
■ 3Com 3102 Business Telephones
■ 3Com 3103 Manager’s Telephones
■ 3Com 3105 Attendant Consoles
■ Older 3Com telephones that include “PE” in the part number
Switch port for connecting a computer or other network device, such as a
3Com Attendant Console, to the network.

122 APPENDIX A: TELEPHONE INSTALLATION AND MAINTENANCE
Handset connector.
Headset connector. 3Com 3102 and 3103 only.
Figure 12 shows underside of the 3Com 3102 Business Telephone.

Connection details for each type of 3Com device are listed on the
packing sheet that is shipped with the device.
Figure 12 Underside of the 3Com 3102 Business Telephone
CAUTION: The NBX system operates over the LAN, not through traditional
telephone wiring. Your telephone connects to the NBX system through an
RJ-45 LAN connector instead of an RJ-11 telephone connector. Your
telephone will not work unless it is connected properly. Ask your
administrator if you have questions about your telephone connection.
The underside of a 3Com Telephone or attendant console includes:

1 AC power adapter connection.
2 Ethernet connector for connection to the LAN.
3 Ethernet connector for an optional connection to your desktop computer.
Not on 3100.
4 Handset connector
5 Headset connector (3102 and 3103 only)
6 Tabs for the support bracket

Installing the 3102 Telephone Label Plate 123
■ For information about the underside of each 3Com Telephone, and for
information about how to connect any 3Com Telephone or Attendant
Console to a Power over Ethernet source, see the packing sheet that
comes with the device.
■ The following device support brackets have built-in strain relief
clamps: 3101, 3102, 3103, 3105, and 3100.
Installing the 3102 The 3Com 3102 Business Telephone has a label plate with localized
Telephone Label button labels that you must install. Once you snap the plate onto the
Plate telephone, you cannot remove it.
To install the plate, slip the tabs along the top edge of the plate into the
slots on the telephone, and then press firmly along the bottom edge of
the plate until you feel it snap into place.
Figure 13 3Com 3102 Label Plate
Attaching and The articulating support bracket is common to the following devices:
Adjusting the ■ 3Com 3105 Attendant Console
Articulating
Support Bracket ■ 3Com 3102 Business Telephone
Figure 14, Figure 15, and Figure 16 show the 3Com 3102 Business
Telephone. The instructions apply to all of these devices.

Figure 14 Attaching the Support Bracket
1 Bracket
2 Mounting supports
3 Cable management clamps
To attach the support bracket, snap the bracket into the mounting
supports on the bottom of the telephone. After you connect the cables to
the phone, press the cables into the cable management clamps on the
stand.
Figure 15 Adjusting the Support Bracket
1 Lock tab
To adjust the support bracket, press to release the lock tab, rotate the
bracket to the position that you want, and then release the lock tab.

Figure 16 Wall Mounting
1 Bottom supports
When you mount a device on a wall, attach the support bracket and
adjust it so that the bottom of the support bracket rests against the
bottom supports on the device.
Safe wall mounting requires 3/4-inch drywall and 1.5-inch drywall screws.
Attaching and The fixed support bracket is common to the following devices:
Adjusting the Fixed ■ 3Com1105 Attendant Console
Support Bracket
■ 3Com 1102, 2102, and 2102-IR Business Telephones
The fixed support bracket can be attached in low profile, high profile, or
wall mount positions. Tabs on the underside of the telephone slip into
slots on the bracket, and the opposite mounting points snap into place.
Low-Profile and In Figure 17, the support bracket is outlined to show you how to install
High-Profile Positions the device in the low-profile and high-profile desktop positions.

Figure 17 Low-Profile and High-Profile Desktop Positions
Wall-Mount Position To mount a device on a wall, put the bracket on the opposite end of the
telephone in the low-profile position. Pull and twist the knob on the
underside of the phone 90 degrees (Figure 18) so that the spring- loaded
peg projects out on the top of the phone (Item 1 in Figure 19).
Figure 18 Knob for the Handset Support Peg

Figure 19 shows an 3Com 2102 Telephone in the wall-mount position.

Safe wall mounting requires 3/4-inch drywall and 1.5-inch drywall screws.
Figure 19 Wall-Mount Position
1
2
1 Handset support peg

2 Wall with a solid backing
3 Support bracket in the low-profile position on opposite end of telephone
Security Wall-Mount An optional security wall-mount bracket that ensures that the device
Bracket cannot be removed by unauthorized persons is available for the following
devices:
■ 3Com 1102, 2102 and 2102-IR Business Telephones
For how to order this bracket, consult your 3Com NBX Voice-Authorized
Partner. Read and follow the instructions that come with the bracket.

Moving Your All 3Com Telephones have the Automatic Telephone Relocation feature.
Telephone Each telephone has a unique “address.” You can move your telephone to
another location, connect it to any Ethernet jack on the LAN, and still
maintain all of your personalized features, speed dials, and extension
number.
Swapping Because your extension number and personal settings are associated with
Telephones your physical telephone, only your administrator can move phone
extension settings from one telephone to another.
Cleaning Your Always unplug your telephone from the power source and from the
Telephone network before you clean it. Use a soft cloth dampened with mild
detergent.
WARNING: Failure to unplug the telephone before you clean it could

result in electrical shock.
Troubleshooting Table 12 lists possible problems that you may encounter and the most
Problems likely solutions. Where possible, each solution refers to the section in this
guide where you can find detailed information.
Table 12 Possible Problems
Possible Problem Suggested Solutions

My telephone has no dial ■ Verify that the power cord is fully inserted in the
tone. The display panel is correct connector on the underside of the
blank. telephone. Use the strain relief tab to prevent the
cord from becoming unplugged.
■ Verify that each Ethernet cable is connected and
that each cable is in the proper connection.
■ Remove and add power to the telephone by
unplugging the power cord at the electric outlet
and plugging it back in.
■ If the telephone is powered through a powered
Ethernet cable, make sure that power is applied to
the cable at its source.

Troubleshooting Problems 129
Table 12 Possible Problems (continued)

My telephone has “locked ■ Your telephone has lost the connection to the
up.” system. Remove the Ethernet cord from the jack,
and then re-insert it into the jack.
■ Wait a few seconds. If the telephone still appears to
be locked, disconnect the electrical power for your
telephone, and then plug it back in.
Callers cannot leave ■ Your mailbox may be full. Log in to your voice
messages on my voice mail. mailbox and delete some messages.
■ Your telephone may be set up for Greeting Only
Mailbox. Log in to NBX NetSet > NBX
Messaging and clear the Greeting Only Mailbox
checkbox.
When I park a call, the You have selected a Call Park extension that is already
display panel shows “Park in use. Try another Call Park extension. Your
xtn in use,” and the call administrator can add additional Call Park Extensions.
returns to my telephone. For details, see “Call Park” in Chapter 7.
When I dial 9 or 8 to access No outside lines are available. Try again in a few
an outside line, the display minutes.
panel shows “All Ports
Busy.”
After I call another user in The other user may have the Hands Free Active on
my organization, I hear a Intercom feature enabled. Begin speaking after you
tone but no ringing. hear the tone. For details, see “Telephone Buttons and
Controls” in Chapter 2 or Chapter 3.
On my 3Com Business You have the Hands Free Active on Intercom feature
Telephone or 3Com enabled. For details, see “Telephone Buttons and
Manager’s Telephone, all Controls” in Chapter 2 or Chapter 3.
incoming internal calls
come over my speaker
phone.
When I try to access the Ask your administrator to verify the IP address that you
NBX NetSet utility, I do not typed into your web browser.
get a response after I type
the NBX system’s IP address
and press Enter.
I am unable to log in to the You must set up your voice mail before you can use the
NBX NetSet utility. NBX NetSet utility. Press the Message button. The
prompts guide you through the setup. Then use your
voice mail password to access the NBX NetSet utility. If
you are on an analog telephone, see “Setting Up Your
Password and Voice Mail for the First Time” in
Chapter 1.

Table 12 Possible Problems (continued)

My telephone is not In NBX NetSet > User Information > Call Forward
forwarding my incoming Default, verify that you have selected Forward to
calls to my voice mailbox. Voice Mail as your call coverage point. For details, see
“Forwarding Incoming Calls” in Chapter 5.
I added a One-Touch speed Use only numeric characters in your Speed Dial setup.
dial, but the telephone For details, see “Special Case: One-Touch Speed Dials”
does not dial that number. in Chapter 6.
I try to pick up a call ringing The telephone that you are using to pick up the call
on another telephone using may not be in the same group as the telephone that is
Directed Call Pickup, but it ringing and the telephone group to which the ringing
fails. telephone belongs does not allow nonmember pickup.
See “Call Pickup” in Chapter 7.
My telephone keeps ■ Your telephone may have lost connection to the
ringing after I pick up the system immediately after a call came in. Remove the
handset. Ethernet cord from the jack, then re-insert it into
the wall jack.
■ Wait a few seconds. If the telephone continues to
ring, disconnect the electrical power for your
telephone, and then plug it back in.
The display panel shows Your telephone may be disconnected from the system.
“Wait for NCP.” Hang up your telephone and wait a few seconds. Then
pick up the handset. If the message still appears on
your telephone display panel, contact your
administrator.
I dial an external call but You may be required to enter an account code to
nothing happens. complete the call. See “Account (Billing) Codes” in
Chapter 7.

INDEX
branch offices, calling 100

A bridged extensions 102, 103
Access buttons broadcasting announcements 94, 95
1102, 2102, and 2102-IR Business busy line (call forwarding) 51
Telephones 27 buttons
1105 Attendant Console 116 1102, 2102, 2102-IR Business Telephones 25
3102 Business Telephone 21 1105 Attendant Console 116
3105 Attendant Console 115 3102 Business Telephone 19
account codes and billing codes 80 3105 Attendant Console 115
feature code 109
ACD 84
and the Do Not Disturb feature 73 C
feature code 109 call centers 84
administrator, definition 10 call coverage point 51
agent (supervisory monitoring) 90 call forward
change 92 all calls 51
all calls, forwarding 51 busy line 51
All Ports Busy message 129 call coverage point 51
analog telephones on an NBX system 13 default 52, 54
announcements, broadcasting 94, 95 feature codes 109
answering calls 47 override 55
applying your call permissions to another precedence 56
telephone 75 problems with 130
Attendant Console ring no answer 51
1105 Access buttons 116 call logs, on telephone display panel 48
3105 Access buttons 115 call park
creating labels 68 default extensions 93
overview 114 feature code 109
Auto Attendant, definition 10 introduction 93
automatic call distribution (ACD) 84 retrieving a parked call 94
feature code 109 Call Park button
automatic telephone relocation 64 1102, 2102, 2102-IR Business Telephones 29
1105 Attendant Console 117
3102 Business Telephone 23
B 3105 Attendant Console 115
barge-in 92 call permissions
billing and account codes 80 applying yours to another telephone 75
feature code 109 introduction 75
blocking call pickup
internal and external ID 81 directed 83
unauthorized outbound calls 74 feature codes 109
bracket group 84
1102, 2102, 2102-IR, security wall-mount 127 introduction 83
3102, telephone support 123 problem 130

132 INDEX
call toggle
feature code 110 D
Call Transfer service (analog lines) 29 delayed ringing 103
Call Waiting service (analog lines) 29 dial tone 107
caller ID troubleshooting a 3Com Telephone 128
feature code 110 dialing calls
identity restriction 82 other methods 50
restricting on outbound calls 81 redial 50
calling groups release with headset 76
and the Do Not Disturb feature 73 switching from pulse to tone 103
feature code 109 direct mail transfer
overview 84 feature code 110
sample configuration 89 overview 59
Calling Line Identity Restriction (CLIR) 82 Direct Mail Transfer button
feature codes 110 1102, 2102, 2102-IR Business Telephones 29
CAS 118 1105 Attendant Console 117
change agent (supervisory monitoring) 92 3102 Business Telephone 23
Class of Service (CoS) override 75 3105 Attendant Console 115
feature code 110 directed call pickup 83
cleaning telephones 128 display panel
CLIR 82 1102, 2102, 2102-IR Business Telephones 26
feature codes 110 3102 Business Telephone 20
coaching 91 call logs, user directory, and speed dial lists 48
codes Do Not Disturb Feature
account and billing 80 and call forwarding 56
feature codes 107 Do Not Disturb feature 73
NBX Feature Codes Guide 9 feature code 110
Complement Attendant Software (CAS) dual tone multi-frequency (DTMF) dialing 103
computer screens and tabs 118 dynamic hunt groups 88
features 118
introduction 113
keyboard shortcuts 119 E
Conference button electrical shock, avoiding 128
1102, 2102, 2102-IR Business Telephones 27 e-mail
3102 Business Telephone 21 getting voice mail messages in 44
conference calls notification of voice mail messages 68
adding parties 59 error tone 107
dropping last party 60 External Paging
feature code 110 dial code 95
introduction 59 external telephone calls, dialing 50
configurable operators 96
confirmation tone 107
connecting a headset F
3102 Business Telephone 22, 76 feature active tone 108
general 76 Feature button
connecting telephones 64, 128 1102, 2102, and 2102-IR Business Telephone 29
caution, RJ-45 versus RJ-11 jacks 122 3102 Business Telephone 23
electrical power 121 feature codes 107
conventions, documentation 10 Feature Codes Guide in NBX NetSet utility 13
creating voice mail messages 39 feature entry tone 107
customer (supervisory monitoring) 90

G 133
feature settings hold

Call Forward All 51 Business Telephones 57
Call Forward Busy 51 feature code 110
Call Forward No Answer 51 introduction 57
CLIR-All 82 more than one call 57
Do Not Disturb 74 Hold button
Forward Calls to Mail 53 1102, 2102, and 2102-IR Business
Find/Phone Tab, Complement Attendant Software Telephones 27
(CAS) 118 1105 Attendant Console 117
Flash button 3102 Business Telephone 21
1102, 2102, 2102-IR Business Telephones 29 3105 Attendant Console 115
flash, feature code 110 hunt groups
forgot my password 32, 34 and the Do Not Disturb feature 73
Forward to Voice Mail 52, 110 calling groups 89
forwarding calls dynamic 88
all calls 51 feature code 109
directly to another user’s mailbox 59 introduction 87
no answer 51 logging in to or out of 89
to your call coverage point 51 sample configuration 87
to your voice mailbox 51, 52 static 88
unanswered calls 51
forwarding voice mail messages 38
FWD MAIL 52 I
Fwd Mail button icons in the NBX NetSet utility
1102, 2102, and 2102-IR Business navigation 16
Telephones 28 shortcuts 16
3102 Business Telephone 21 icons, display panel
using 52 locked telephone 74
incoming calls
ACD groups 84
G answering 47
Greeting-Only mailboxes 44 calling groups 87
group call pickup 84 forwarding directly to another user’s mailbox 59
group lists, personal voice mail hunt groups 87
creating 40 transferring 58
modifying 41 indicators of voice mail messages
group voice mailbox 45 off-site notification 68
on your phone 34
infrared port 28
H installing telephones 121
hands free 78 intercom 78
feature code 110 Hands Free button, 1102, 2102, and 2102-IR
Hands Free button Business Telephones 28
1102, 2102, and 2102-IR Business Hands Free button, 3102 Business Telephone 22
Telephones 28 internal paging 94, 95
3102 Business Telephone 22 internal caller ID 81
handset volume 61 internal calls, dialing 50
headset Internal Paging
connector on 3102 Business Telephone 22 dial code 95
using 76, 78
volume 61
Headset button, 3102 Business Telephone 24 J
jack, Ethernet 64

134 INDEX
message waiting indicator for voice mail

L analog telephones 34
Label cover tabs message waiting indicator to telephone 98
3105 Attendant Console 115 cancelling 99
LabelMakers deleting 99
for attendant consoles 68 feature codes 110
for telephones 68 retrieving 98
Windows Desktop shortcut 68 sending 98
labels messages
Attendant Console, creating 68 creating and sending 39
printing 68 forwarding 38
length of voice messages 32 listening, from a remote location 35
lights, status listening, from telephone 35
1102, 2012, and 2102-IR Business Telephone 30 listening, NBX NetSet utility 34
3102 Business Telephone 24 maximum length 32
listening to messages 34 Message Waiting Indicator for a group 45
from remote telephones 35 private 43
lists replying to 37
display lists feature code 111 sending 39
modifying personal voice mail group lists 41 urgent 43
personal voice mail group lists 40 Messaging, NBX 31
printing speed dials 67 microphone
locking your telephone 3102 Business Telephone 21
blocking unauthorized calls 74 monitor 90
feature code 110 monitoring, supervisory 90
off-site notification restriction 71 moving telephones 64, 128
logs on NBX telephone display panel MSG button
answered calls 48 1102, 2102, and 2102-IR Business
dialed calls 48 Telephones 28
missed calls 48 Mute button
long-distance calls, preventing 74 1102, 2102, and 2102-IR Business
Telephones 28
M MWI
mail group lists See message waiting for voice mail indicators
personal 40
system 40
mailboxes N
greeting-only 44 name announcement
group 45 changing 33
phantom 45 setting the first time 14
setting up personal 13 NBX Business Telephones
maintenance, telephone 121 1102, 2102, and 2102-IR 25
Message button 3102 19
1102, 2102, and 2102-IR Business NBX Messaging 31
Telephones 28 NBX NetSet password
3102 Business Telephone 21 changing 14
message waiting for voice mail indicators forgotten 14
1102, 2102, and 2102-IR Business initial 14, 16
Telephones 28, 34 overview 32
3102 Business Telephone 20, 34
for a telephone group 45

O 135
NBX NetSet utility personal speed dial numbers 65

getting started 16 personal voice mail group lists
listening to messages 34 creating 40
overview 15 modifying 41
problems with 129 phantom mailboxes 45
new messages dial tone 107 picking up calls 83
notification, off-site 68 feature codes 109
position, wall-mount bracket 126
printing labels 68
O printing speed dial lists 67
off-site notification 68 private messages 43
managing using the telephone 72 problems, solving 121
operators Program button
configuring 96 1102, 2102, and 2102-IR Business
viewing 97 Telephones 27
outbound calls 3102 Business Telephone 21
dialing 50 programmable Access buttons
speed dials 64 1102, 2102, and 2102-IR Business
Telephones 27, 28
1105 Attendant Console 116
P 3102 Business Telephone 21, 22
page zones 3105 Attendant Console 115
extensions 95 public address system 94, 95
pager, off-site notification 68 pulse dialing 103
paging 94 feature codes 111
required equipment 94, 95
restricted by Do Not Disturb 73
to announce a parked call 93 Q
zones 96 Quick Reference sheets 17
Palm integration 78
Park button
3105 Attendant Console 115 R
parking a call receptionist
feature code 109 and the Attendant Console 114
overview 93 and the Complement Attendant Software
retrieving a parked call 94 (CAS) 118
passwords definition 10
changing in the NBX NetSet utility 16 Redial button
changing on the telephone 32 1102, 2102, and 2102-IR Business
feature codes 111 Telephones 27
forgotten 32, 34 3102 Business Telephone 21
security tips 33 redialing calls 50
permissions feature code 111
allowed calls 75 Release button
viewing your call permissions 75 1102, 2102, and 2102-IR Business
persistent features 108 Telephones 29
personal greeting 3102 Business Telephone 23
changing 33 release, feature code 111
selecting 33 releasing calls with headset 76
setting the first time 14 relocating telephones 128
personal speed dial buttons remote notification 68
1102, 2102, and 2102-IR Business Telephone 29 remote offices, calling 100
3102 Business Telephone 23 replying to voice mail messages 37

136 INDEX
ring no answer (call forwarding) 51 speaker phone

ringer 1102, 2102, and 2102-IR Business
tone, choosing 64 Telephones 27
volume 61 3102 Business Telephone 21
ringing feature code 111
delayed 103 problems with 129
Do Not Disturb 73 using 50
RJ-11 jack caution, avoiding use with 3Com volume 61
Telephones 122 speed dials 64
RJ-45 jack caution, using instead of RJ11 122 One-Touch 66
personal speed dial numbers 65
printing lists of 67
S problems with 130
scroll buttons system-wide speed dial numbers 66
1102, 2102, and 2102-IR Business supervisory monitoring 90
Telephones 27 supervisor 90
3102 Business Telephone 21 support bracket
security 1102, 2102, 2102-IR, security wall-mount 127
passwords 32, 33 3102, attaching 123
preventing unauthorized outbound calls 74 support brackets
telephone line on multiple telephones 79 1105, attaching 125
wall-mount bracket, 1102, 2102, 2102-IR 127 3105, attaching 123
sending messages 39 system voice mail groups 40
shared telephone lines
bridged extensions 102
delayed ringing 103 T
hunt groups 84 tabs, Complement Attendant Software (CAS)
Shift button screens 118
1105 Attendant Console 116 telephone line on multiple telephones, security 79
3105 Attendant Console 116 telephone maintenance 121
show lists, feature code 111 telephone number, for off-site notification 69
silent monitor 90 telephone support brackets
silent ring 64 1105 125
Simultaneous Paging 3102 123
dial code 95 3105 123
site codes 101 telephones
soft buttons cleaning 128
1102, 2102, and 2102-IR Business connecting 121
Telephones 27 mounting 1105 125
3102 Business Telephone 20 mounting 3105 123
software, Complement Attendant (CAS) 118 mounting, 3102 123
sound volume moving and swapping 128
1102, 2102, and 2102-IR Business Telephone 27 time-of-day calling restrictions 74
3102 Business Telephone 22 toggle calls
Speaker button feature code 110
1102, 2102, and 2102-IR Business toll calls, preventing others from dialing 75
Telephones 27 tone dialing 103
3102 Business Telephone 21 tones, 3Com Telephones 107
tones, ringer selection 64

U 137
Transfer button
1102, 2102, and 2102-IR Business W
Telephones 27 Wait for NCP message 130
1105 Attendant Console 117 wall-mount bracket 126
3102 Business Telephone 21 whisper 91
3105 Attendant Console 115 Windows Desktop shortcut, for LabelMaker 68
transferring calls 58
feature code 111
troubleshooting Z
introduction 121 zone paging 94
list of possible problems 128
U
unauthorized use of telephone, preventing 74
urgent messages 43
user, definition 10
V
version, feature code 111
voice mail
accessing through e-mail 44
changing your password 32
components 31
creating messages 39
forwarding 38
greeting-only mailbox 44
group mailboxes 45
groups 40
indicators 34
initializing 13
listening remotely 35
listening to messages 34
maximum message length 32
password security tips 33
personal group lists, creating and modifying 41
private messages 43
problems with 129
replying to 37
retrieving from a remote location 35
sending 39
setting up 13
urgent messages 43
volume control buttons
1102, 2102, and 2102-IR Business Telephone 27
volume settings 61
feature codes 111
speaker 61

138 INDEX

Sip 3102 Manual

Uploaded by

Copyright:

Available Formats

Sip 3102 Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sip 3102 Manual

Uploaded by

Copyright:

Available Formats

NBX Business Telephone

NBX Networked Telephony Solutions

Part Number 900-0210-01

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

ABOUT THIS GUIDE

2 3COM 3102 BUSINESS TELEPHONE

3 3COM 1102, 2102, AND 2102-IR BUSINESS TELEPHONES

Downloaded from www.Manualslib.com manuals search engine

Listening to NBX Messages 34

Downloaded from www.Manualslib.com manuals search engine

Forwarding Incoming Calls 51

6 PERSONALIZING YOUR TELEPHONE

Downloaded from www.Manualslib.com manuals search engine

7 GETTING MORE FROM YOUR TELEPHONE SYSTEM

Downloaded from www.Manualslib.com manuals search engine

Using Message Waiting Indicator to Telephone 98

9 3COM 3105 AND 1105 ATTENDANT CONSOLES

A TELEPHONE INSTALLATION AND MAINTENANCE

Downloaded from www.Manualslib.com manuals search engine

Moving Your Telephone 128

Downloaded from www.Manualslib.com manuals search engine

This guide is intended for anyone using:

Devices documented in this guide include:

If the information in the release notes (readme.pdf) on the NBX Resource

Analog telephones connected through the Analog Terminal Card or the

Downloaded from www.Manualslib.com manuals search engine

If you are looking for information about Turn to

Downloaded from www.Manualslib.com manuals search engine

Table 3 lists conventions that are used throughout this guide.

Icon Type Description

Downloaded from www.Manualslib.com manuals search engine

Include the following information with your comments:

Downloaded from www.Manualslib.com manuals search engine

This chapter covers these topics:

Table 4 describes how to set up your first password.

Downloaded from www.Manualslib.com manuals search engine

Feature 3Com Phones Analog Telephones

Downloaded from www.Manualslib.com manuals search engine

See Chapter 5, Chapter 6, and Chapter 7 for discussions about the

If your NBX system uses a messaging application other than NBX

Downloaded from www.Manualslib.com manuals search engine

Icon Action Where You Go

Click the icons below the window to go directly to these features:

Downloaded from www.Manualslib.com manuals search engine

NBX Feature Codes Guide

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

For how these features work on an analog telephone that is connected to

Downloaded from www.Manualslib.com manuals search engine

Figure 1 3Com 3102 Business Telephone

Downloaded from www.Manualslib.com manuals search engine

■ System-wide speed dial numbers

Downloaded from www.Manualslib.com manuals search engine

17 Hands Free button — Allows you to answer internal (intercom) calls

Downloaded from www.Manualslib.com manuals search engine

Figure 2 3102 Access Buttons

Downloaded from www.Manualslib.com manuals search engine

14 Personal Speed Dial 9