CATALOG2019

SCG (Thailand) Co. Ltd. is one of the world

OUR COMPANY MISSION STATEMENT
leading manufacturers of cylinder valves,
regulators and brass fittings for a wide
Our Company Mission Statement is to produce products that are:
range of applications.
(a) Designed to the highest safety standards.
Our award winning company was founded
(b) Delivered to specification and on time.
in 1987 and is based in Patumthani, near
(c) Representing excellent value for money (helped by Government tax concessions). Bangkok, Thailand, where we employ
about 800 people in our modern factory.
(d) Ongoing Innovative Design, Research and Development program in conjunction with ourcustomers
needs and requirements.
We are the only Thai manufacturer whose
(e) Having a full awareness of the standards and compliance requirements of applicable laws, products comply with all the necessary
regulations and market needs.
international standards and our
(f) Producing our products with the minimum impact to the environment in regards to production facility is TPED approved,
pollution, energy consumption and low carbon footprint. granting products bearing with pi-mark.

Approval Certification and Commitments:

MADE IN
SCG (Thailand) Co., Ltd. holds and commits to maintain the following approval and accreditations:
UL, TIS, AGA, SII, ITS, SABS, PSB, SIRIM, TPED, ISO 9001:2008, ISO 14001:2004 and OHSAS
THAILAND
18001:2007.

Pg.1
 REGULATORS PÁG.3
& VALVES
PÁG.16
REFRIGERANT Our production facilities are fully
VALVE equipped with advanced technology
machineries, operated under the
VALVES
LPG DOMESTIC
PÁG.22
company’s accredited management
systems, integrated with Quality
Management System (ISO 9001),
CAMPING & FORKLIFT PÁG.38 Environmental Management System (ISO
E X A M P L E C O N E C T I O N S
14001), Occupational Health & Safety
Management System (OHSAS 18001) and

INDUSTRIAL PÁG.40 the newly accredited Energy Management

System (ISO 50001). Manual operation
throughout production processes has

INDUSTRIAL
K I T S F O R T A N K S
PÁG.51
been replaced by automation, enhancing
our capability of manufacturing valves,
regulators, fittings and various gas

INDUSTRIAL
V A L V E S
PÁG.55 appliances for supplying to the industry
worldwide.

Pg.2
REGULATORS
& VALVES

R326
LOW PRESSURE REGULATOR
(Type Threaded Connection – Rubber Nose)
Reference : TIS 805
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 10.5 mm.
Inlet pressure : 140 – 700 kPa.
Outlet pressure : 4 kPa.
Capacity : 2 kg/hr

HIGH PRESSURE REGULATOR

(Type Threaded Connection – Rubber Nose)
Reference : TIS 875
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 11.5 mm.
Inlet pressure : 800 kPa.
Outlet pressure : 180 kPa.
Capacity : 6 kg/hr
R924
Pg.3
 REGULATORS
& VALVES

R326SP
LOW PRESSURE REGULATOR (With Excess Flow and Pressure Gauge)
(Type Threaded Connection – Rubber Nose)
Reference : TIS 805
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 10.5 mm.
Inlet pressure : 140 – 700 kPa.
Outlet pressure : 4 kPa.
Capacity : 2 kg/hr

LOW PRESSURE REGULATOR

(Type Threaded Connection – Rubber Nose)
Reference : TIS 805
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 10.5 mm.
Inlet pressure : 140 – 700 kPa.
Outlet pressure : 4 kPa.
R326S Capacity : 2 kg/hr
(With Excess Flow)

Pg.4
REGULATORS
& VALVES

HIGH PRESSURE REGULATOR R924 (With Excess Flow)

(Type Threaded Connection – Rubber Nose)

Reference : TIS 875
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 11.5 mm.
Inlet pressure : 800 kPa.
Outlet pressure : 180 kPa.
Capacity : 6 kg/hr

HIGH PRESSURE REGULATOR

(Type Threaded Connection – Rubber Nose)
Reference : TIS 875
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 11.5 mm.
Inlet pressure : 800 kPa.
Outlet pressure : 180 kPa.
R924 Capacity : 6 kg/hr
(With Excess and Pressure Gauge)

Pg.5
 REGULATORS
& VALVES

D-R323-H
LOW PRESSURE REGULATOR
(Type Threaded Connection – Spanner Tightened)
Reference : TIS 805
Inlet connection : G3/8-LH
Outlet connection : Diameter 10.5 mm.
Inlet pressure : 140 – 700 kPa.
Outlet pressure : 2.8 kPa.
Capacity : 1-1.5 kg/hr LOW PRESSURE REGULATOR
(Type Threaded Connection – Hand Tightened )
Reference : EN 16129
Inlet connection : Ø21.8x1.814 LH
G.2 (EN 15202)
Outlet connection : H.50 (EN 16129)
Inlet pressure : 1 – 16 bar
Outlet pressure : 37 mbar
Capacity : 1 kg/hr
R323

Pg.6
REGULATORS
& VALVES

R500
LOW PRESSURE REGULATOR
(Type Threaded Connection – Rubber Nose)
Reference : TIS 805
Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Diameter 10.5 mm.
Inlet pressure : 140 – 700 kPa.
Outlet pressure : 4 kPa.
Capacity : 2 kg/hr

LOW PRESSURE REGULATOR

(Type Threaded Connection – Hand Tightened)
Reference : SANS 1237
Inlet connection : 3/8” - 19 BSPF - RH
(BS 2779)
Outlet connection : H.50 (EN 16129)
Inlet pressure : 0.8 – 7 bar
Outlet pressure : 28 mbar
R323- G Capacity : 1 kg/hr

Pg.7
 REGULATORS
& VALVES

R323
LOW PRESSURE REGULATOR
(Type Threaded Connection – Spanner Tightened)
Reference : EN 16129
Inlet connection : W21.8x1/14" LH
(DIN 477 Part 1)
Outlet connection : H.50 (EN 16129)
Inlet pressure : 0.5 – 7.5 bar
Outlet pressure : 10 - 65 mbar
Capacity : 1.5 kg/hr
LOW PRESSURE REGULATOR
(Type Threaded Connection – Hand Tightened)

Pg.8
REGULATORS

D-R323-E.2
LOW PRESSURE REGULATOR LOW PRESSURE REGULATOR
Reference : SI 1921 Reference : SI 1921
Inlet connection : 0.880”-14 NGO-LH-EXT Inlet connection : W21.8x1.814-LH
Outlet connection : Ø 8 mm. Outlet connection : Ø 8 mm.
Inlet pressure : 0.5-6 bar Inlet pressure : 0.5-6 bar
Outlet pressure : 30 mbar Outlet pressure : 30 mbar
Capacity : 1 kg Capacity : 1 kg
D-R323-A.7

LOW PRESSURE REGULATOR

LOW PRESSURE REGULATOR

Reference : SI 1921
Inlet connection : Rc1/4
Outlet connection : Rc3/8
Inlet pressure : 0.5-6 bar
Outlet pressure : 30mbar
Capacity : 4 kg
D-R300-B.1

Pg.9
 REGULATORS

R300
LOW PRESSURE REGULATOR LOW PRESSURE REGULATOR
(Type Quick Coupling Bayonet Connection)
Reference : SI 1921
Reference : PNS 1961
Inlet connection : R1/4-19 TPI
Inlet connection : Bayonet
Outlet connection : R3/8-19 TPI
G.61 (EN 15202)
Inlet pressure: 0.5 – 6 bar
Outlet connection : H.51 (EN 16129)
Outlet pressure: 30 mbar
Inlet pressure: 0.7 – 15.6 bar
Capacity: 4 kg/hr
Outlet pressure : 28 mbar
Capacity : 1.5 kg/hr
R96L

LOW PRESSURE REGULATOR

ADAPTOR (Type Threaded Connection – Hand Tightened)
Reference : N/A Reference : EN 16129
Inlet connection : Diameter 20 mm. Inlet connection : M16x1.5 RH
G.52 (EN 15202) G.3 (EN15202)
Outlet connection : 1/8” - SAE FLARE Outlet connection : H.53 (EN 16129)
Working temperature : -20 °C to 50 °C Inlet pressure : 0.3 – 7.5 bar
Outlet pressure : 30 mbar
Capacity : 0.8 kg/hr
CC R329

Pg.10
REGULATORS
R460L
ADAPTOR LOW PRESSURE REGULATOR
Reference : EN 730-2+SEP (Type Threaded Connection – Rubber Nose)
Inlet connection : Diameter 22 mm. Reference : TIS 805
G.54 (EN 15202) Inlet connection : 0.880-14 NGO-LH-EXT
Outlet connection : Ø21.8x1.814 LH 55° Outlet connection : H.51 (EN 16129)
G.5 (EN 15202) Inlet pressure : 140 – 700 kPa.
Working temperature : -20 °C to 65 °C Outlet pressure : 4 kPa.
R323S Capacity : 2 kg/hr
(With Excess Flow)

LOW PRESSURE REGULATOR

HIGH PRESSURE REGULATOR

(Type Quick Coupling)
LOW PRESSURE REGULATOR
Reference : MS 1165 (Type Quick Coupling)
Inlet connection : Diameter 20 mm. G.52 (EN 15202) – R470H Reference : EN 16129
Diameter 22 mm. G.54 (EN 15202) – R480H Inlet connection : Diameter 16 mm.
Diameter 27 mm. G.59 (EN 15202) – R97H G.50 (EN 15202)
Outlet connection : H.51 (EN 16129) Outlet connection : H.51 (EN 16129)
Inlet pressure : 0.5 – 10 bar Inlet pressure : 0.3 – 16 bar
Outlet pressure : 0 - 2 bar Outlet pressure : 30 mbar
R470H,R480H,R97H R92 Capacity : 1.5 kg/hr
Capacity : 0 - 6 kg/hrg/hr

Pg.11
 REGULATORS

LOW PRESSURE REGULATOR LOW PRESSURE REGULATOR

(Type Quick Coupling) (Type Quick Coupling)
Reference : EN 16129
Reference : EN 16129
Inlet connection :
Inlet connection : Diameter 20 mm. G.52 (EN 15202) – R450L
Diameter 20 mm. G.52 (EN 15202) – R450L
Diameter 21 mm. G.53 (EN 15202) – R455L
Diameter 21 mm. G.53 (EN 15202) – R455L
Diameter 22 mm. G.54 (EN 15202) – R460L
Diameter 22 mm. G.54 (EN 15202) – R460L
Diameter 27 mm. G.59 (EN 15202) – R97L
Diameter 27 mm. G.59 (EN 15202) – R97L
Outlet connection : H.50 (EN 16129)
Outlet connection : H.50 (EN 16129)
H.51 (EN 16129)
H.51 (EN 16129)
Inlet pressure : Butane 0.3 – 7.5 bar
Inlet pressure : Butane 0.3 – 7.5 bar
LPG 0.3 – 16 bar
LPG 0.3 – 16 bar
Propane 1 – 16 bar
Propane 1 – 16 bar
Outlet pressure : Butane 30 mbar
Outlet pressure : Butane 30 mbar
LPG 30 mbar
LPG 30 mbar
Propane 37 mbar
Propane 37 mbar
Capacity : 1.5 kg/hr
Capacity : 1.5 kg/hr

R450L,R455L,R460L,R97L R450L,R455L,R460L,R97L

Pg.12
REGULATORS

LOW PRESSURE REGULATOR

(Type Quick Coupling)
Reference : EN 16129
Inlet connection :
Diameter 20 mm. G.52 (EN 15202) – R450L
Diameter 21 mm. G.53 (EN 15202) – R455L
Diameter 22 mm. G.54 (EN 15202) – R460L
Diameter 27 mm. G.59 (EN 15202) – R97L
Outlet connection : H.50 (EN 16129)
H.51 (EN 16129)
Inlet pressure: Butane 0.3 – 7.5 bar
LPG 0.3 – 16 bar
Propane 1 – 16 bar
Outlet pressure : Butane 30 mbar
LPG 30 mbar
Propane 37 mbar
Capacity : 1.5 kg/hr

R450L,R455L,R460L,R97L

Pg.13
 REGULATORS
& VALVES

R420
LOW PRESSURE REGULATOR LOW PRESSURE REGULATOR
(Type Quick Coupling) (Type Quick Coupling)
Reference : EN 16129 Reference : EN 16129
Inlet connection : Diameter 35 mm. Inlet connection : Diameter 35 mm.
G.56 (EN 15202) G.56 (EN 15202)
Outlet connection : H.50 (EN 16129) Outlet connection : H.50 (EN 16129)
H.51 (EN 16129) H.51 (EN 16129)
Inlet pressure: Butane 0.3 – 7.5 bar Inlet pressure : Butane 0.3 – 7.5 bar
LPG 0.3 – 16 bar LPG 0.3 – 16 bar
Propane 1 – 16 bar Propane 1 – 16 bar
Outlet pressure: Butane 30 mbar Outlet pressure : Butane 30 mbar
LPG 30 mbar R420 LPG 30 mbar
Propane 37 mbar Propane 37 mbar
Capacity : 2 kg/hr Capacity : 2 kg/hr

HIGH PRESSURE REGULATOR

(Type Quick Coupling)
Reference : TIS 875
Inlet connection : Diameter 35 mm.
G.56 (EN 15202)
Outlet connection : H.51 (EN 16129)
Inlet pressure : 3 - 12 bar
Outlet pressure : 0 - 2.5 bar
Capacity : 0 - 4 kg/hr
R420H

Pg.14
REGULATORS
& VALVES

LOW PRESSURE REGULATOR

(1.312-5 ACME-2G-RH-EXT)
Reference : UL 144
Inlet connection : 1.312-5 ACME-2G-RH-EXT
R601
(Connection No.791)
Outlet connection : 5/8" UNF
Inlet pressure : 10 - 100 PSIG
Outlet pressure : 11 Inch Wc.
Capacity : 90000 BTU (2 kg/hr.)

LOW PRESSURE REGULATOR

(1.312-5 ACME-2G-RH-EXT)
Reference : UL 144
Inlet connection : 1.312-5 ACME-2G-RH-EXT
(Connection No.791)
Outlet connection : 5/8" UNF
Inlet pressure : 10 - 100 PSIG
Outlet pressure : 11 Inch Wc.
R601 Capacity : 90000 BTU (2 kg/hr.)

Pg.15
 REFRIGERANT
VALVE

CVD2-Single Port
Diaphragm Seal ▪ Liquid & Vapor Phase ▪ Single Outlet

• Designed and manufactured according to EN ISO 10297

• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Length of liquid withdrawal tube as to be required
• Compatible to R115, R12, R152a, R114, RC318,
R1318, R218, R161, R142b, R500, R1314a,
R125, HFC-32 (48 bar SRV Series)
• Delivered with Refilling Protecting Device (RPD)
& Outlet Protecting Cap
• Useable for cylinder with or without valve protection

Pg.16
REFRIGERANT
VALVE

CVD2-Dual Port
Diaphragm Seal ▪ Liquid & Vapor Phase ▪ Double Outlets

• Designed and manufactured according to EN ISO 10297

• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Length of liquid withdrawal tube as to be required
• Compatible to R115, R12, R152a, R114, RC318, R1318,
R218, R161, R142b, R500, R1314a, R125,
HFC-32 (48 bar SRV Series)
• Delivered with Refilling Protecting Device (RPD)
& Outlet Protecting Cap
• Useable for cylinder with or without valve protection

Pg.17
 REFRIGERANT
VALVE

V6R
Soft Seal ▪ Single Port ▪ Vapor Phase

• Designed and manufactured according to EN ISO 10297

• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Compatible to R115, R12, R152a, R114,
RC318, R1318, R218, R161, R142b, R500, R1314a, R125
• Delivered with Refilling Protecting
Device (RPD) & Outlet Protecting Cap
• Useable for cylinder with valve protection

Pg.18
REFRIGERANT
VALVE

V8
Soft Seal ▪ Dual Port ▪ Vapor & Liquid Phase

• Designed and manufactured according to EN ISO 10297

• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Compatible to R115, R12, R152a, R114, RC318,
R1318, R218, R161, R142b, R500, R1314a, R125
• Useable for cylinder with valve protection

Pg.19
 REFRIGERANT
VALVE

V6S1
Soft Seal ▪ Single Port ▪ Liquid Phase
• Designed and manufactured according to EN ISO 10297
• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Compatible to R115, R12, R152a, R114, RC318, R1318, R218, R161, R142b, R500, R1314a, R125
• Delivered with Refilling Protecting Device (RPD) & Outlet Protecting Cap
• Useable for cylinder with valve protection

CGA 165

Pg.20
REFRIGERANT
VALVE

CVD1
Diaphragm ▪ Single Port ▪ Single Phase
• Designed and manufactured according to EN ISO 10297
• TPED approved (π 0589)
• Service temperature range -20°C to +65°C (-4°F to +149°F )
• Compatible to R115, R12, R152a, R114, RC318, R1318, R218, R161, R142b, R500, R1314a, R125
• Delivered with Refilling Protecting Device (RPD) & Outlet Protecting Cap
• Useable for cylinder with or without valve protection

CGA 165
CGA 165

CGA 165

Pg.21
 VALVES

D-V91-BJ.5
25.6 mm. SC VALVE INTEGRAL
WITH ANTI PILFERAGE DEVICE (INDIA)
• Ref. Standard : IS 8737
• Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar
• Inlet connection : 3/4” – 14 NGT (CGA V-1) LPG CYLINDER COMPACT
• Outlet connection : Ø 25.6 mm or as to be required VALVE WITH SAFETY RELIEF
• Ref. Standard : ISO 14245
• Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC
• Test Pressure: 0.1 , 25 bar
• Inlet connection : 3/4” – 14 NGT (CGA V-1)
• Outlet connection:
Diameter 20 mm. G.52 (EN 15202)
Diameter 21 mm. G.53 (EN 15202)
Diameter 22 mm. G.54 (EN 15202)
WITH SEDIMENT TUBE

Pg.22
VALVES

D-V6QC-S
POL VALVE WITH CHECK VALVE
• Ref. Standard : CNS 1324
• Hydrostatic Test : 3 MPa
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.01 , 1.8 MPa
• Inlet connection : W28.8x1/14 TAP (DIN 477 Part 1) L VALVE WITH CHECK VALVE
• Outlet connection : W22.5-14-LH (JIS B 8245)
• Handle : Ø 55 mm painted yellow or as to be required
AND SEDIMENT TUBE
• Ref. Standard : CNS 1324
• Hydrostatic Test : 3 MPa
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.01 , 1.8 MPa
• Inlet connection :
W28.8x1/14 TAP (DIN 477 Part 1)
• Outlet connection :
W22.5-14-LH (JIS B 8245)
D-V6QC-S.1 • Handle :
Ø 55 mm painted yellow or as to be required

Pg.23
 VALVES
JUMBO TYPE

D-MT99-I
SINGLE-PIECE JUMBO TYPE JUMBO VALVE (CHILE)
• Ref. Standard : SS 294 • Ref. Standard : NCH1514/1.of 93
• Hydrostatic Test : 33 bar • Hydrostatic Test : 45 Kgf/cm2
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 3 , 22 kgf/cm2
• Inlet connection : W28,8x1/14’’ • Inlet connection : W28,8x1.814 conic (NCh78)
• Outlet connection : Ø 35 mm G.56 (EN 15202) • Outlet connection : Ø 35 mm G.56 (EN 15202)
D-MT99-G.6

JUMBO VALVE WITHOUT SAFETY RELIEF JUMBO VALVE (CARIBBEAN)

• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245
• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar
• Inlet connection : W28,8x1/14’’ • Inlet connection : 3/4’’-14 NGT (CGA V-1)
• Outlet connection : Ø 35 mm G.56 (EN 15202) • Outlet connection : Ø 35 mm G.56 (EN 15202)
D-MT99-J D-MT99-B.3

Pg.24
VALVES
JUMBO TYPE

JUMBO VALVE (-40º) D-MT99-G.5 LPG CYLINDER VALVE

• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245

• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar

• Operating temp. : -40ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar

• Inlet connection : 28,8x1/14 tap • Inlet connection : M26.3x2 PERP. TO CONIC

• Outlet connection : Ø 35 mm G.56 (EN 15202) • Outlet connection : Ø 16 mm G.50 (EN 15202)
D-V-92-J.3

JUMBO VALVE (PANAMA) LPG CYLINDER VALVE (VIETNAM)

• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245
• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1-25 bar
• Inlet connection : W28,8x1/14’’ • Inlet connection : 3/4’’-14 NGT
• Outlet connection : Ø 35 mm G.56 (EN 15202) • Outlet connection : Ø 16 mm G.50 (EN 15202)
D-MT99-G.13 D-V92-G

Pg.25
 VALVES
JUMBO TYPE

LPG CYLINDER VALVE V92 LPG CYLINDER VALVE (TURKEY)

D-V92-J.1
• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245

• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar

• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 23 bar

• Inlet connection : M26.3x2 PERP. TO CONIC • Inlet connection : W19,8x1/14’’

• Outlet connection : Ø 16 mm G.50 (EN 15202) • Outlet connection : Ø 16 mm G.50 (EN 15202)
V-92-E.1

MINI JUMBO VALVE WITHOUT SAFETY RELIEF MINI JUMBO VALVE WITHOUT SAFETY RELIEF
• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245
• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar
• Inlet connection : W28,8x1/14’’ • Inlet connection : 3/4’’ - 14 NGT (CGA V-1)
• Outlet connection : Ø 16 mm G.50 (EN 15202) • Outlet connection : Ø 16 mm G.50 (EN 15202)
D-V92-H
D-V92-A.3

Pg.26
VALVES
COMPACT TYPE

LPG CYLINDER COMPACT VALVE D-V91-C.8

LPG CYLINDER COMPACT VALVE
• Ref. Standard : ISO 14245
• Ref. Standard : ISO 14245
• Hydrostatic Test : 45 bar
• Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1-25 bar
• Test Pressure : 0.1 , 25 bar
• Inlet connection : W28,8x1/14 TPI
• Inlet connection : 3/4’’- 14 NGT (CGA V-1)
• Outlet connection : Ø 20 mm G.52 (EN 15202)
• Outlet connection : Ø 22 mm G.54 (EN 15202)
D-V91-A.1

LPG CYLINDER COMPACT VALVE LPG CYLINDER COMPACT VALVE

• Ref. Standard : ISO 14245 • Ref. Standard : MS 831
• Hydrostatic Test : 45 bar • Hydrostatic Test : 3.3 MPa
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 25 kg/cm2 • Test Pressure : 0.01 , 2.5 MPa
• Inlet connection : M26.2x2 • Inlet connection : W28,8x1/14 TPI
D-V91 -L.7 D-V91-A.6
• Outlet connection : Ø 20 mm G.52 (EN 15202) • Outlet connection : Ø 20 mm G.52 (EN 15202)

Pg.27
 VALVES
S N A P, E F K & B AY O N E T

LPG CYLINDER VALVE D-V97-B

SNAP TIGHT VALVE FOR COMPOSITE CYLINDER
• Ref. Standard : ISO 14245 • Ref. Standard : ISO 14245

• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar

• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1-25 bar

• Inlet connection : 3/4’’ - 14 NGT (CGA V-1) • Inlet connection : M26x1.5-6g

D-V97-C.11
• Outlet connection : Ø 27 mm G.59 (EN 15202) • Outlet connection : Ø 27 mm G.59 (EN 15202)

D-V90-A.4 BAYONET TYPE VALVE

EFK TYPE VALVE WITH SAFETY RELIEF
• Ref. Standard : ISO14245 • Ref. Standard : ISO 14245

• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar

• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar

• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Inlet connection : 3/4’’-14 NGT

D-V96-K.1
• Outlet connection : EFK • Outlet connection : Bayonet

Pg.28
VALVES
P O L T Y P E

D-V87-Q.5
POL VALVE GRAND NUT TYPE (ALUM. HW) POL VALVE GRAND NUT TYPE
• Ref. Standard : UL 1769 • Ref. Standard : UL 1769

• Hydrostatic Test : 85 bar • Hydrostatic Test : 85 bar

• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1-25 kg/cm2

• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) D-V87-BN.1 • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)

• Outlet connection : 0,885’’-14NGO-LH (CGA 510) • Outlet connection : 0,885’’-14NGO-LH (CGA 510)

POL VALVE GRAND NUT TYPE POL VALVE GRAND NUT TYPE
• Ref. Standard : UL 1769 • Ref. Standard : N/A
• Hydrostatic Test : 85 bar • Hydrostatic Test : 85 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
D-V87-AI.3
• Outlet connection : 0,885’’-14NGO-LH (CGA 510) • Outlet connection : 0.885’’-14 NGO-LH INT (CGA 510)
D-V87-Q23

Pg.29
 VALVES
P O L T Y P E

D-V6QC-N
POL VALVE WITH CHECK DEVICE
POL VALVE WITH CHECK DEVICE
(FOR 4&9 Kg. CYLINDER)
• Ref. Standard : N/A
• Ref. Standard : UL 1769
• Hydrostatic Test : 3.04 MPa
• Hydrostatic Test : 8.5 MPa
• Operating temp. : -30ºC to 50ºC
• Operating temp. : -40ºC to 55ºC
• Test Pressure : 0.01 , 1,82 MPa
• Test Pressure : 0.01 , 2.5 MPa
• Inlet connection : W29.5-14,55 (KS B 6212)
D-V6QC-H • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : W22.5 TPI-14-LH (KS B 6212)
• Outlet connection : 0.885’’-14 NGO-LH INT (CGA 510)

LPG CYLINDER VALVE (ADC HW) 100LBS PROPANE CYLINDER VALVE

(WITHOUT DIP TUBE)
• Ref. Standard : SI 637
• Ref. Standard : UL 1769
• Hydrostatic Test : 45 bar
• Hydrostatic Test : 85 bar
• Operating temp. : -20ºC to 65ºC
• Operating temp. : -40ºC to 55ºC
• Test Pressure : 0.1 , 21 bar
• Test Pressure : 0.1, 25 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : 0,885’’-14NGO-LH (CGA 510) D-V6-DG.5 D-V6-CW3 • Outlet connection : 0,885’’-14NGO-LH (CGA 510)

Pg.30
VALVES
P O L T Y P E

SABS APPROVED POL VALVE LPG CYLINDER VALVE

• Ref. Standard : SANS 199 • Ref. Standard : NTC 1091
• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : 0ºC to 70ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 22 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : G5/8 (BSP) F (L/H) D-V6-U8 • Outlet connection : 0,885’’-14NGO-LH INT (CGA 510)

D-V6-BE

LPG CYLINDER VALVE LPG CYLINDER VALVE FOR V6

(W/O SRV)
• Ref. Standard : ISO 15995
• Ref. Standard : UL 1769
• Hydrostatic Test : 45 bar
• Hydrostatic Test : 85 bar
• Operating temp. : -20ºC to 65ºC
• Operating temp. : -40ºC to 55ºC
• Test Pressure : 0.1 , 25 bar
• Test Pressure : 0.1, 25 bar
• Inlet connection : W19.8x1/14’’ TAP
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
D-V6-AO.3 D-V6-CM
• Outlet connection : 0,885’’-14NGO-LH (CGA 510)
• Outlet connection : 0,885’’-14NGO-LH (CGA 510)

Pg.31
 VALVES
P O L T Y P E

D-V6-M16 LPG CYLINDER POL VALVE WITH

POL LPG CYLINDER VALVE (COLOMBIA) BLEEDER+VENTTUBE (PIN TYPE)
• Ref. Standard : NTC 1091 • Ref. Standard : UL 1769

• Hydrostatic Test : 45 bar • Hydrostatic Test : 85 bar

• Operating temp. : -0ºC to 70ºC • Operating temp. : -40ºC to 55ºC

• Test Pressure : 0.1 , 22 bar • Test Pressure : 0.1 , 25 bar

• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) D-V6-M.9 • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)

• Outlet connection : 0.885’’-14 NGO-LH INT (CGA 510) • Outlet connection : 0.885’’-14 NGO-LH INT (CGA 510)

LPG CYLINDER VALVE HELIUM CYLINDER VALVE (GERMANY)

• Ref. Standard : ISO 1769 • Ref. Standard : ISO 10297

• Hydrostatic Test : 45 bar • Hydrostatic Test : 75 bar

• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC

• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 48 bar

• Inlet connection : W19.8x1/14’’ TAP • Inlet connection : 17E (BS EN ISO 11363-1)
D-V6-M.1 D-V6-AO.5
• Outlet connection : 0,885’’-14NGO-LH INT (CGA 510) • Outlet connection : 5/8’’-14 RH (BS 341)

Pg.32
VALVES
P O L T Y P E

D-V6-CW
LPG 100 LBS CYLINDER VALVE LPG CYLINDER VALVE FOR V9
• Ref. Standard : UL 1769 • Ref. Standard : UL 1769
• Hydrostatic Test : 85 bar • Hydrostatic Test : 85 bar
• Operating temp. : -40ºC to 55ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : 0.885’’-14 NGO-LH-INT (CGA 510) D-V9-A • Outlet connection : 0,885’’-14NGO-LH (CGA 510)

LPG POL CYLINDER VALVE POL LPG CYLINDER VALVE

• Ref. Standard : UL 1789 • Ref. Standard : UL 1769
• Test Pressure : 25 kg/cm2 • Hydrostatic Test : 33 bar
• Safety Relief Valve : 375 psi • Operating temp. : -20ºC to 65ºC
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Test Pressure : 0.1 , 25 bar
• Outlet connection : 0,885’’-14NGO-LH (CGA 510) D-V9-B29 • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : 0.885’’-14 NGO-LH INT (CGA 510)
D-V9-A.5-01

Pg.33
 VALVES
CAMPING TYPE

D-V50EX-U.6
LPG CYLINDER VALVE MODEL V50EX (QUICK FILL) CAMPING VALVE
• Ref. Standard : SANS 199 • Ref. Standard : N/A
• Hydrostatic Test : 45 bar • Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1 , 25 bar
• Inlet connection : 1/2’’ - 14 NGT (CGA-V1) D-V50EX-U.24 • Inlet connection : 1/2’’ - 14 NGT (CGA-V1)
• Outlet connection : G 3/8 (BSP) F (R/H) • Outlet connection : W20X1.814-LH 55º (G.1)

LPG CYLINDER VALVE MODEL V50EX CAMPING VALVE WITH SAFETY

RELIEF INTEGRATED WITH BLEEDER
• Ref. Standard : SANS 199
• Ref. Standard : ISO 15995
• Valve Flow: 3m3/min
• Hydrostatic Test : 45 bar
• Safety Relief Valve: 25.8 bar
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 25 kg/cm2
• Test Pressure : 0.1-25 bar
• Inlet connection : 1/2’’ - 14 NGT (CGA-V1)
D-V50EX-R.4 • Inlet connection : 19.8mm RH 14 TPI (DIN 477)
• Outlet connection : 3/8 - 19 BSPF RH
D-V50EX-D.7 • Outlet connection : G3/8’’-19-LH (G.25)

Pg.34
VALVES
CAMPING TYPE

CAMPING VALVE CANISTER VALVE

• Ref. Standard : UL 1769
• Ref. Standard : ISO 14245
• Hydrostatic Test : 1232,5 psi
• Hydrostatic Test : 45 bar
• Operating temp. : -20ºC to 65ºC
• Operating temp. : -20ºC to 65ºC
• Test Pressure : 1.45 - 362,5 psi
• Test Pressure : 0.1- 25 bar
• Inlet connection : 1/2’’ - 14 NPT
SEALED BY BLUE EVERSEAL No.183
D-V20-O D-V50EX-Z
• Outlet connection : 1.000-20-UNEF-2A-RH-EXT

LPG CYLINDER VALVE FOR V87 EX

• Ref. Standard : UL 1269
• Valve Flow: -
• Safety Relief Valve: -
• Test Pressure : 25 kg/cm2
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : 0.903’’-14 NGO-LH-EXT
D-V87-F

Pg.35
 VALVES
W I T H T U B E

D-V89-A
LPG CYLINDER MULTI VALVE LIQUID WITHDRAWAL VALVE
• Ref. Standard : UL 1769 • Ref. Standard : UL1769
• Hydrostatic Test : 85 bar • Hydrostatic Test : 85 bar
• Operating temp. : -20ºC to 65ºC • Operating temp. : -20ºC to 65ºC
• Test Pressure : 0.1 , 25 bar • Test Pressure : 0.1-25 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1) • Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : 3/4’’-6 ACME 20 FNT • Outlet connection : 0.903’’-14 NGO-LH-EXT
D-V87-R

DUAL VALVE V8 OPD VALVE SNAP TIGHT

(FOR 20LB CYLINDER,80-83% SHUT OFF)
• Ref. Standard : SANS 199
• Ref. Standard : N/A
• Hydrostatic Test : 45 bar
• Hydrostatic Test : 85 bar
• Operating temp. : -20ºC to 65ºC
• Operating temp. : -40ºC to 55ºC
• Test Pressure : 0.1 , 25 bar
• Test Pressure : 0.1-25 bar
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Inlet connection : 3/4’’ - 14 NGT (CGA-V1)
• Outlet connection : G 5/8’’-14 BSP.F LH
D-V8-C • Outlet connection : Ø 27 mm G.59 (EN 15202)
D-V97OPD-A-01

Pg.36
VALVES
W I T H T U B E

OPD VALVE WITH DT 6.4’’ LPG CYLINDER DUAL VALVE

(FOR 30LB CYLINDER,80-83% SHUT OFF)
V6-QCC-B.13 (WITH EXCESS FLOW VALVE DEVICE + CGA 555 O/L)

• Ref. Standard : UL 1769 • Ref. Standard : SS 294

• Hydrostatic Test : 85 bar • Hydrostatic Test : 45 bar

• Operating temp. : -20ºC to 65ºC
• Operating temp. : -40ºC to 55ºC
• Test Pressure : 0.1 , 25 bar
• Test Pressure : 0.1 , 25 bar • Inlet connection : 3/4’’ - 14 NGT (CGA V-1)
• Inlet connection : 3/4’’ - 14 NPT (ANSI-ASME B1 20.1) • Outlet connection : 0.885’’- 14 NGO-LH-INT(VAPOUR)

• Outlet connection : 0.885’’- ACME 2G R EXT (MOD) D-V8-A5 0.903’’ - 14 NGO-LH-EXT (LIQUID)

Pg.37
 CAMPING
VALVE CONNECTIONS

WITH CYLINDER ADAPTOR

INLET CONNECTION: 1/2-14’’ NGT (CGA-V1)

OUTLET CONNECTION: Ø 20 mm G.52 (EN 15202)

FLOW CAPACITY: 3m3/min

HYDROSTATIC PRESSURE: 36.5 bar

TEST PRESSURE: 0.1,18.2 bar

WORKING TEMPERATURE: -20,65ºC

SCG DRAWING: D-V50EX-U.23

CONNECTED TO STOVE THROUGH REGULATOR

Pg.38
FORKLIFT
VALVE OPERATION

INLET CONNECTION: 3/4-14’’ NGT (CGA-V1) INSIDE TANK VIEW

OUTLET CONNECTION: 1-1/4’’-5 ACME 2G (CGA-V1)

FLOW CAPACITY: 5m3/min

HYDROSTATIC PRESSURE: 45 bar

TEST PRESSURE: 0.1,25 bar

WORKING TEMPERATURE: -20,60ºC

SCG DRAWING: D-V6-CH.14

Pg.39
 INDUSTRIAL
F I L L E R V A LV E S

DOUBLE CHECK FILLER VALVES FOR FORKLIFT & DOT CYLINDER

Tank Connection Line Connection Hex Wrench Flats SCG Drawing

3/4" NGT 1 3/4"-6 ACME-2G-EXT 45 mm. D-FV-A

D-FV-A.5
1 1/4" NPT 1 3/4"-6 ACME-2G-EXT 51 mm. D-FV-C.4

1 3/4"-6 ACME-2G-EXT
3/4" NGT 40 mm. D-FV-A.5 D-FV-C.4
and 0.885-14NGO-LH-INT

D-FV-A

DOUBLE CHECK FAST FILLER VALVES FORKLIFT & DOT CYLINDER

Tank Connection Line Connection Wrench Hex Flats SCG Drawing

FIGURE 3
3/4" NGT 37 mm. D-FV-G
(E/ECE/324 REG.No.67)

D-FV-G

Pg.40
INDUSTRIAL
M U LT I S E R V I C E V A LV E S

D-V89-A.17: MULTI SERVICE (VAPOR) VALVE WITH OPD FOR 200 LBS CYLINDER
D-V89-A.9: MULTI SERVICE (VAPOR) VALVE FOR DOT CYLINDER (200 LBS CYLINDER)

Pressure Relief
Inlet Connection Outlet Connection Filler Connection Flow capacity OPD SCG Drawing
Valve Setting

0.885-14NGO-LH-INT 1 3/4"-6 ACME-2G-

3/4" NGT 375 psi 700 SCFM/Air with OPD D-V89-A.17
CGA 510 ENT

G 5/8"-14 BSP.F-LH 1 3/4"-6 ACME-2G-

3/4" NGT 2,580 kPa 19.8 m 3 /min with OPD D-V89-A.15
with Check Valve ENT

3/4" NGT 0.885-14NGO-LH-INT 1 3/4"-6 ACME-2G- 375 psi 700 SCFM/Air - D-V89-A.9
D-V89-A.9 CGA 510 ENT
1 3/4"-6 ACME-2G-
3/4" NGT G 5/8"-14 BSP.F-LH 26 bar 19.8 m 3 /min - D-V89-A.18
ENT

0.885-14NGO-LH-INT 1 3/4"-6 ACME-2G- 1,123

D-V89-A.17 3/4" NGT 375 psi - D-V89-K
CGA 510 ENT SCFM/Air

Pg.41
 INDUSTRIAL
M U LT I S E R V I C E V A LV E S

MULTI SERVICE VALVE FOR DOT & ASME CYLINDER

Pressure Relief
Inlet Connection Outlet Connection Filler Connection SCG Drawing
Valve Setting

0.885-14NGO-LH-INT 1 3/4"-6 ACME-2G-

1" NGT 375 psi D-V89-J
ENT
CGA 510

0.885-14NGO-LH-INT 1 3/4"-6 ACME-2G-

1" NGT 250 psi D-V89-J.1
ENT
CGA 510
D-V89-J

Pg.42
INDUSTRIAL
M U LT I S E R V I C E V A LV E S

MULTI SERVICE VALVE FOR DOT & ASME CYLINDER

Inlet Outlet Vapor Equalization Connection Fixed Liquid Dip Tube SCG
D-V89-G Connection Connection Connection Closing Flow Level Vent Length Drawing
Size Valve

0.885-14NGO- 1 1/4"-5 4200 CFH @

LH-INT LH- As Customer
3/4" NGT ACME-2G 100 PSIG Yes D-V89-G
EXT CGA 555 Require

0.885-14NGO- As Customer
3/4" NGT - - Yes D-V89-M
LH-INT CGA 510 Require

D-V89-M

Pg.43
 INDUSTRIAL
P O L V A L V E S

POL VALVES
Inlet Connection Outlet Connection Vent Tube SCG Drawing

0.885-14NGO- As Customer
3/4" NGT LH- INT D-V87-AI.1
Require
CGA 510

0.885-14NGO- As Customer
3/4" NGT LH-INT D-V87-AI.3
Require
CGA 510

D-V87-AI.1

D-V87-AI.3

Pg.44
INDUSTRIAL
FLOAT GAUGES & LIQUID LEVEL VENT VALVES

D-GAUGE-C
FLOAT GAUGES
Inlet Connection SCG Drawing

3/4" NGT D-GAUGE-C

PRESSURE RELIEF VALVES

Inlet Connection Tube SCG Drawing

1/4" NPT - D-VV-A.4

As Customer
1/4" NPT D-VV-A
Require

D-VV-A

D-VV-A4

Pg.45
 INDUSTRIAL
P R E S S U R E R E L I E F VA LV E S

PRESSURE RELIEF VALVES

D-PRV-F.3
Container Pressure Relief
Flow capacity SCG Drawing
Connection Valve Setting

1" NPT 375 psi 2,000 SCFM/Air D-PRV-F.3

D-PRV-F.5

1" NPT 375 psi 1,391 SCFM/Air D-PRV-F.5

D-PRV-H.1 1 1/4" NPT 250 psi 4,209 SCFM/Air D-PRV-H.1

3/4" NPT 375 psi 400 SCFM/Air D-PRV-Q

D-PRV-Q
3/4" NGT 375 psi 400 SCFM/Air D-7545K-A

D-7545K-A

Pg.46
INDUSTRIAL
LIQUID WITHDRAWAL VALVES

LIQUID WITHDRAWAL VALVES

Inlet Connection Outlet Connection Tube SCG Drawing

0.903"-14 NGO-LH-EXT
3/4" NGT - D-V89-D
CGA 555

D-V89-D.2 0.903"-14 NGO-LH-EXT As Customer

3/4" NGT D-V89-D.1
Require
CGA 555
As Customer
3/4" NGT 3/4" NGT D-V89-D.2
Require

3/4" NGT 3/4" NPT - D-V89-D.7

D-V89-D

Pg.47
 INDUSTRIAL
L I Q U I D W I T H D R A W A L V A LV E S

LIQUID WITHDRAWAL VALVES

Inlet Connection Outlet Connection SCG Drawing

0.903"-14 NGO-
1 5/8" UNF D-V89-D.11
LH-EXT CGA 555

1 5/8" UNF 3/4” NPT D-V89-D.12

D-V89-D.12

Pg.48
INDUSTRIAL
F O R K L I F T C O N N E C T O R S

FORKLIFT CONNECTORS
Coupling
Hose Connection SCG Drawing
Connection
D-M220M-A
1 1/4"-5 ACME-
3/8" NPT D-M220M-A
2G-EXT
1 1/4"-5 ACME-
1/4" NPT D-ADAPT-D
2G-EXT

D-ADAPT-D

Pg.49
 INDUSTRIAL
PRESSURE TAP ADAPTORS
& SERVICE VALVES

D-CV-K.3
PRESSURE TAP ADAPTORS
Coupling
Hose Connection SCG Drawing
Connection

0.4375-20
1/8" NPT UNF-2A-RH- D-CV-K.3
EXT CGA 165
SERVICE VALVES
Outlet
Inlet Connection SCG Drawing
Connection

3/4" NGT 3/4" NPT D-V5-AW.1

0.625-18UNF-
3/4" NGT 24-RH-EXT D-V5-AW.3
CGA 182 (30 )

0.625-18UNF-
3/4" NGT 24-RH-EXT D-V5-AW.4
D-V5-AW.1 CGA 182

Pg.50
INDUSTRIAL
40LBS/18KG FORKLIFT TANK

PRESSURE RELIEF FILLER VALVE & ACCESORIES

INLET CONNECTION: 1/4’’ NPT CONTAINER CONNECTION: 3/4’’ NGT

TUBE: AS CUSTOMER REQUIRE LINE CONNECTION: 1 3/4"-6 ACME-2G-EXT

SCG DRAWING: D-VV-A HEX WRENCH FLATS: 45MM

SCG DRAWING: D-FV-A

PRESSURE RELIEF VALVE Hose Connection

Coupling
Connection
SCG Drawing
OPTIONAL

1 1/4"-5 ACME-
3/8" NPT D-M220M-A
CONTAINER CONNECTION: 3/4’’ NPT 2G-EXT
1 1/4"-5 ACME- D-M220M-A D-ADAPT-D
PRESSURE RELIEF VALVE SETTING: 375 PSI 1/4" NPT D-ADAPT-D
2G-EXT

FLOW CAPACITY: 400 SCFM/AIR

SCG DRAWING: D-PRV-Q

LIQUID WITHDRAWAL

FLOAT GAUGE INLET CONNECTION: 3/4’’ NGT

OUTLET CONNECTION: 3/4’’ NPT

INLET CONNECTION: 3/4’’ NGT SCG DRAWING: D-V5-AW.1
SCG DRAWING: D-GAUGE-C

*THIS TANK IS NOT A COMPANY PRODUCT

Pg.51
 INDUSTRIAL
200LBS/90KG DOT TANKS

VALVES & ACCESSORIES KITS

INLET CONNECTION: 3/4’’ NGT VENT TUBE: AS CUSTOMER REQUIRE

OUTLET CONNECTION: SCG DRAWING: D-V87-AI.1

0.885-14NGO-LH-INT CGA510

CONTAINER CONNECTION: 3/4’’ NGT HEX WRENCH FLATS: 40MM

LINE CONNECTION: SCG DRAWING: D-FV-A5

1 3/4"-6 ACME-2G-EXT
AND 0.885-14NGO-LH-INT

CONTAINER CONNECTION: 1’’ NPT FLOW CAPACITY: 1,391 SCFM/AIR

PRESSURE RELIEF SCG DRAWING: D-PRV-F.5

VALVE SETTING: 375PSI

INLET CONNECTION: 3/4’’ NGT SCG DRAWING: D-V89-D

OUTLET CONNECTION:
0.903’’-14 NGO-LH-EXT
CGA 555

*THIS TANK IS NOT A COMPANY PRODUCT

Pg.52
INDUSTRIAL
420LBS/190KG DOT & ASME TANKS

MULTIVALVE KIT
INLET CONNECTION: 1’’ NGT PRESSURE RELIEF VALVE SETTING: 375 PSI

OUTLET CONNECTION: SCG DRAWING: D-V89-J

0.885-14NGO-LH-INT CGA 510

FILLER CONNECTION:
1 3/4‘’-6 ACME-2G-ENT

INLET CONNECTION: 3/4’’ NGT TUBE: AS CUSTOMER REQUIRE

OUTLET CONNECTION: SCG DRAWING: D-V89-D

0.903’’-14 NGO-LH-EXT CGA 555

VALVES & ACCESSORIES KITS

INLET CONNECTION: 3/4’’ NGT TUBE: AS CUSTOMER REQUIRE

OUTLET CONNECTION: SCG DRAWING: D-V87-AI.1

0.885-14NGO-LH-INT CGA 510

CONTAINER CONNECTION: 1’’ NPT FLOW CAPACITY: 2,000 SCFM/AIR

PRESSURE RELIEF SCG DRAWING: D-PRV-F.3

VALVE SETTING: 375PSI

TANK CONNECTION: 1 1/4’’ NPT HEX WRENCH FLATS: 51MM

LINE CONNECTION: SCG DRAWING: D-FV-C.4

1 3/4’’-6 ACME-2G-EXT
*THIS TANK IS NOT A COMPANY PRODUCT
Pg.53
 INDUSTRIAL
5 0 0 K G / 2 0 0 0 K G T A N K

VALVES & ACCESSORIES KITS

INLET CONNECTION: 3/4’’ NPT CAP WRENCH FLATS: 33MM

OUTLET CONNECTION: APROX. CLOSING FLOW, LIQUID GPM: 20

1 5/8’’ UNF
SCG DRAWING: D-EXC-Q
BODY WRENCH HEX FLATS: 45MM

INLET CONNECTION: 3/4’’ NGT FLEX LIQUID LEVEL

OUTLET CONNECTION: VENT VALVE: YES

0.885-14NGO-LH-INT CGA 510
DIP TUBE LENGHT:
VAPOR EQUALIZATION CON.:
AS CUSTOMER REQUIRE
CON. SIZE: 1 1/4’’-5 ACME-2G
SCG DRAWING: D-V89-G
CLOSING FLOW: 4200 CFH@ 100 PSIG

CONTAINER CONNECTION: 1 1/4’’ NPT FLOW CAPACITY: 4,209 SCFM/AIR

PRESSURE RELIEF SCG DRAWING: D-PRV-H.1

VALVE SETTING: 250PSI

TANK CONNECTION: 1 1/4’’ NPT HEX WRENCH FLATS: 51MM

*THIS TANK IS NOT A COMPANY PRODUCT
LINE CONNECTION: SCG DRAWING: D-FV-C.4
1 3/4’’-6 ACME-2G-EXT

Pg.54
INDUSTRIAL
A M M O N I A V A L V E

STAINLESS STEEL VALVE FOR AMMONIA & SULFUR DIOXIDE

(COMPRESSION PACKED GLAND SEAL TYPE)

INLET OUTLET OPERATING

PRD SCG DRAWING COMPLIANCE TO:
CONNECTION* CONNECTION PRESSURE
ISO 10297
W21.8 (DIN 477 INTERNATIONAL STANDARDS FOR CYLINDER
25E / W28.8 29 bar N/A D-V1-A.4
No.6) VALVES DESIGN SPECIFICATIONS

CGA V 9
W21.8 (DIN 477
25E / W28.8 40 bar N/A D-V1-A.7 STANDARD FOR GAS CYLINDER VALVES
No.6)
CGA S-1.1

1.030-14NGO-RH- STANDARD FOR PRESSURE RELIEF DEVICES

25E / W28.8 40 bar N/A D-V1-J
EXT(CGA No.660) TYPE APPROVAL
!
TPED (ISO V) BY BAM-GERMANY
3/4” NGT G1/2 (BS.10) 29 bar N/A D-V1-L

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: STAINLESS STEEL SEAL SEAT: TEFLON-PCTFE MAXIMUM OPERATING PRESSURE : 40 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: N/A O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C HANDWHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: STAINLESS STEEL STEM: STAINLESS STEEL FLOW CAPACITY (MIN. CV): N/A PRD FLOW CAPACITY: N/A

HANDWHEEL: ALUMINIUM CLOSING TORQUE: 3 NM.

Pg.55
 INDUSTRIAL
B U N D L E S V A L V E

MANIFOLD VALVES FOR CYLINDER BUNDLES AND FILLING SYSTEMS

(O-RING SEAL TYPE) (PV1 SERIES)

LIST FEATURES

PV1 SERIES, MANIFOLD VALVE FOR CYLINDER BUNDLES AND FILLING SYSTEMS

SUITABLE FOR SEVERAL GASES

AVAILABLE WITH ONE, TWO, OR THREE OUTLETS

AVAILABLE WITH ALL THREAD SPEC CONFIGURATION

DESIGN SPECIFICATIONS

TEST PRESSURE: 338 BAR CLOSING TORQUE: 3 NM

MAXIMUM OPERATING PRESSURE: 200 BAR MAX. TORQUE: 25 NM..

OPERATING TEMPERATURE: -20 TO 65 °C

ORIFICE SIZE: 4-6 MM

MATERIALS COMPONENTS INLET OUTLET OPERATING

PRD SCG DRAWING
VALVE BODY: FORGED BRASS EN12165 ALLOY O-RING SEAL: SYNTHETIC RUBBER CONNECTION* CONNECTION PRESSURE

GLAND NUT: BRASS STEM: BRASS

” NPT CGA No.580 200 bar N/A D-PV1-G
SEAL SEAT: POLYAMIDE

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS

Pg.56 !
INDUSTRIAL
B U N D L E S V A L V E

MANIFOLD VALVES FOR CYLINDER BUNDLES AND FILLING SYSTEMS

(PRESSURE SEAL TYPE) (PV1 SERIES)

LIST FEATURES

PV1 SERIES, MANIFOLD VALVE FOR CYLINDER BUNDLES AND FILLING SYSTEMS

SUITABLE FOR SEVERAL GASES

AVAILABLE WITH ONE, TWO, OR THREE OUTLETS

AVAILABLE WITH ALL THREAD SPEC CONFIGURATION

DESIGN SPECIFICATIONS

TEST PRESSURE: 338 BAR CLOSING TORQUE: 3 NM

MAXIMUM OPERATING PRESSURE: 200 BAR MAX. TORQUE: 25 NM..

OPERATING TEMPERATURE: -20 TO 65 °C

ORIFICE SIZE: 4-6 MM

MATERIALS COMPONENTS INLET OUTLET OPERATING

PRD SCG DRAWING
VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE CONNECTION* CONNECTION PRESSURE

GLAND NUT: BRASS O-RING SEAL: SYNTHETIC RUBBER

” NPT CGA No.580 200 bar N/A D-PV1-F
HANDWHEEL: ALUMINIUM STEM: BRASS

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS

!
Pg.57
 INDUSTRIAL
FLAMMABLE GAS VALVE

BRASS HIGH PRESSURE VALVE FOR FLAMMABLE GASES

(O-RING SEAL TYPE)

DESIGN SPECIFICATIONS

MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM. COMPLIANCE TO:

OPERATING TEMPERATURE: -20 TO 65 °C H/W NUT INSTALLATION TORQUE: 12-15 NM.

ISO 10297
FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR INTERNATIONAL STANDARDS FOR CYLINDER

CLOSING TORQUE: 3 NM. VALVES DESIGN SPECIFICATIONS

CGA V 9

STANDARD FOR GAS CYLINDER VALVES

MATERIALS COMPONENTS
CGA S-1.1
VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE STANDARD FOR PRESSURE RELIEF DEVICES

TYPE APPROVAL
BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER
TPED (ISO V) BY BAM-GERMANY
! GLAND NUT: BRASS STEM: BRASS

HAND WHEEL: ALUMINUM

INLET OUTLET OPERATING

PRD SCG DRAWING
CONNECTION* CONNECTION PRESSURE

25E G 5/8-LH (BS.4) 200 BAR N/A D-VH2-B

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS

Pg.58
INDUSTRIAL
FLAMMABLE GAS VALVE

BRASS HIGH PRESSURE VALVE FOR FLAMMABLE GASES

(PRESSURE SEAL TYPE)

INLET OUTLET OPERATING

COMPLIANCE TO: PRD SCG DRAWING
CONNECTION* CONNECTION PRESSURE
ISO 10297
25E G 5/8-LH (BS.4) 200 BAR 260 – 306 BAR D-VH2-A.1
INTERNATIONAL STANDARDS FOR CYLINDER

VALVES DESIGN SPECIFICATIONS

CGA V 9 25E G 5/8-LH (BS.4) 200 BAR N/A D-VH2-B.1

STANDARD FOR GAS CYLINDER VALVES

CGA S-1.1
W29.5 CGA No.350 150 BAR 210 – 235 bar D-VH2-C
STANDARD FOR PRESSURE RELIEF DEVICES

TYPE APPROVAL
*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS
TPED (ISO V) BY BAM-GERMANY !

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C HAND WHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HANDWHEEL: ALUMINIUM CLOSING TORQUE: 3 NM.

Pg.59
 INDUSTRIAL
FLAMMABLE GAS VALVE

BRASS HIGH PRESSURE VALVE FOR FLAMMABLE GASES

(COMPRESSION PACKED GLAND SEAL)

INLET OUTLET OPERATING

PRD SCG DRAWING
CONNECTION* CONNECTION PRESSURE COMPLIANCE TO:

25T G 5/8-LH (BS.4) 30 bar N/A D-VC2H2-A.1 ISO 10297

INTERNATIONAL STANDARDS FOR CYLINDER

VALVES DESIGN SPECIFICATIONS

PZ39 G 5/8-LH (BS.4) 30 bar N/A D-VC2H2-A.2
CGA V 9

STANDARD FOR GAS CYLINDER VALVES

CGA S-1.1
*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm. WITH TEFLON APPLIED ON THREADS
STANDARD FOR PRESSURE RELIEF DEVICES

TYPE APPROVAL
!
TPED (ISO V) BY BAM-GERMANY

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY PACKING: TEFLON MAXIMUM OPERATING PRESSURE: 30 BAR MAX. TORQUE: -

BURSTING DISC BODY: BRASS PLATE: BRASS OPERATING TEMPERATURE: -20 TO 65 °C HAND WHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS FILTER: STAINLESS STEEL FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

SPINDLE: STAINLESS STEEL LOCK RING: STAINLESS STEEL CLOSING TORQUE: 3 NM.

Pg.60
INDUSTRIAL
INERT GAS VALVE

BRASS HIGH PRESSURE VALVE FOR INERT GASES

(O-RING SEAL TYPE)

INLET OUTLET OPERATING

PRD SCG DRAWING
COMPLIANCE TO: CONNECTION* CONNECTION PRESSURE

ISO 10297 25E G 5/8 (BS.3) 200 bar N/A D-VN2-G

INTERNATIONAL STANDARDS FOR CYLINDER

VALVES DESIGN SPECIFICATIONS W29.5 G 5/8 (BS.3) 200 bar N/A D-VN2-G.1
CGA V 9

STANDARD FOR GAS CYLINDER VALVES

25E CGA No.580 150 bar 210 – 235 bar D-VN2-J
CGA S-1.1

STANDARD FOR PRESSURE RELIEF DEVICES

W29.5 CGA No.580 150 bar 210 – 235 bar D-VN2-J.1
TYPE APPROVAL

TPED (ISO V) BY BAM-GERMANY

W29.5 CGA No.320 150 bar 210 – 235 bar D-VCO2-C

!

25E 0.860 (BS.8) 150 bar 210 – 235 bar D-VCO2-B

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm.

WITH TEFLON APPLIED ON THREADS

25E 0.860 (BS.8) 200 bar N/A D-VCO2-D

MATERIALS COMPONENTS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C H/W NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HAND WHEEL: ALUMINUM CLOSING TORQUE: 3 NM.

Pg.61
 INDUSTRIAL
INERT GAS VALVE

BRASS HIGH PRESSURE VALVE FOR INERT GASES

(PRESSURE SEAL TYPE)

INLET OUTLET OPERATING

PRD SCG DRAWING
CONNECTION* CONNECTION PRESSURE COMPLIANCE TO:

25E CGA No.580 150 bar 210 – 235 bar D-VN2-A.1

ISO 10297

INTERNATIONAL STANDARDS FOR CYLINDER

W29.5 CGA No.580 150 bar 210 – 235 bar D-VN2-A.3
VALVES DESIGN SPECIFICATIONS

CGA V 9
25E CGA No.677 150 bar 210 – 235 bar D-VN2-D
STANDARD FOR GAS CYLINDER VALVES

CGA S-1.1
25E G 5/8 (BS.3) 200 bar N/A D-VN2-I
STANDARD FOR PRESSURE RELIEF DEVICES

TYPE APPROVAL
W29.5 G 5/8 (BS.3) 200 bar N/A D-VN2-I.1
TPED (ISO V) BY BAM-GERMANY

! 25E 0.860 (BS.8) 200 bar N/A D-VN2-K

25E W22 t.p.i.14 150 bar 210 – 235 bar D-VN2-L

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm.

WITH TEFLON APPLIED ON THREADS

25E 0.860 (BS.8) 150 bar 210 – 235 bar D-VCO2-F

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C HAND WHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HANDWHEEL: ALUMINIUM CLOSING TORQUE: 3 NM.

Pg.62
INDUSTRIAL
INERT GAS VALVE

RESIDUAL HIGH PRESSURE VALVE FOR INERT GASES

(O-RING & PRESSURE SEAL TYPE) COMPACT

INLET OUTLET OPERATING

PRD SCG DRAWING COMPLIANCE TO:
CONNECTION* CONNECTION PRESSURE

ISO 10297

25E G 5/8 (BS.3) 200 bar N/A D-VN2-M INTERNATIONAL STANDARDS FOR CYLINDER

VALVES DESIGN SPECIFICATIONS

CGA V 9

STANDARD FOR GAS CYLINDER VALVES

25E 0.860 (BS.8) 150 bar 210 – 235 bar D-VCO2-G
CGA S-1.1

STANDARD FOR PRESSURE RELIEF DEVICES

TYPE APPROVAL
25E CGA No.580 150 bar 210 – 235 bar D-VN2-B
TPED (ISO V) BY BAM-GERMANY

*RECOMMENDED INSTALLATION TORQUE: 155-200 Nm.

WITH TEFLON APPLIED ON THREADS

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C HAND WHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HANDWHEEL: ALUMINIUM CLOSING TORQUE: 3 NM.

Pg.63
 INDUSTRIAL
OXIDIZING GAS VALVE

BRASS HIGH PRESSURE VALVE FOR OXIDIZING GASES

(O-RING SEAL TYPE)

INLET OUTLET OPERATING

COMPLIANCE TO: PRD SCG DRAWING
CONNECTION CONNECTION PRESSURE
ISO 10297

INTERNATIONAL STANDARDS FOR CYLINDER 25E G 5/8 (BS.3) 200 bar N/A D-VO2-C
VALVES DESIGN SPECIFICATIONS

CGA V 9
W29.5 CGA No.540 150 bar 210 – 235 bar D-VO2-D
STANDARD FOR GAS CYLINDER VALVES

CGA S-1.1

STANDARD FOR PRESSURE RELIEF DEVICES

25E 11/16 (BS13) 250 bar N/A D-VN20-A
TYPE APPROVAL

TPED (ISO V) BY BAM-GERMANY 25E CGA No.326 150 bar N/A D-VN20-B
!

MATERIALS COMPONENTS DESIGN SPECIFICATIONS

VALVE BODY: HIGH TENSILE BRASS SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C H/W NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HAND WHEEL: ALUMINUM CLOSING TORQUE: 3 NM.

Pg.64
INDUSTRIAL
OXIDIZING GAS VALVE

BRASS HIGH PRESSURE VALVE FOR OXIDIZING GASES

(PRESSURE SEAL TYPE)

COMPLIANCE TO: INLET OUTLET OPERATING

PRD SCG DRAWING
CONNECTION CONNECTION PRESSURE
ISO 10297

INTERNATIONAL STANDARDS FOR CYLINDER

25E G 5/8 (BS.3) 200 bar N/A D-VO2-E
VALVES DESIGN SPECIFICATIONS

CGA V 9

STANDARD FOR GAS CYLINDER VALVES

W29.5 CGA No.540 150 bar 210 – 235 bar D-VO2-L
CGA S-1.1

STANDARD FOR PRESSURE RELIEF DEVICES W29.5 W22-14th 150 bar 210 – 235 bar D-VO2-N
TYPE APPROVAL

TPED (ISO V) BY BAM-GERMANY !

MATERIALS DESIGN SPECIFICATIONS

VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE MAXIMUM OPERATING PRESSURE: 150 / 200 BAR MAX. TORQUE: 25 NM.

BURSTING DISC BODY: BRASS O-RING SEAL: SYNTHETIC RUBBER OPERATING TEMPERATURE: -20 TO 65 °C HAND WHEEL NUT INSTALLATION TORQUE: 12-15 NM.

GLAND NUT: BRASS STEM: BRASS FLOW CAPACITY (MIN. CV): 0.35 PRD FLOW CAPACITY: 960 L/MIN. @ 6.9 BAR

HANDWHEEL: ALUMINIUM CLOSING TORQUE: 3 NM.

Pg.65
 INDUSTRIAL
P I N I N D E X V A L V E

POST MEDICAL CYLINDER VALVE FOR OXYGEN GAS

PIN INDEX (TOGGLE TYPE) (O-RING SEAL TYPE)

LIST FEATURES

PV1 SERIES, MANIFOLD VALVE FOR CYLINDER BUNDLES AND FILLING SYSTEMS

SUITABLE FOR SEVERAL GASES

AVAILABLE WITH ONE, TWO, OR THREE OUTLETS

AVAILABLE WITH ALL THREAD SPEC CONFIGURATION

DESIGN SPECIFICATIONS

MAXIMUM OPERATING PRESSURE: 150 BAR CLOSING TORQUE: -

OPERATING TEMPERATURE: -20 TO 65 °C MAX. TORQUE: -

MATERIALS COMPONENTS INLET OUTLET OPERATING

PRD SCG DRAWING
VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE CONNECTION* CONNECTION PRESSURE

GLAND NUT: BRASS O-RING SEAL: SYNTHETIC RUBBER

3/4”-16 UNF-2A CGA No.870 150 bar N/A D-VO2-G
TOGGLE: BRASS STEM: BRASS

Pg.66 !
INDUSTRIAL
P I N I N D E X V A L V E

POST MEDICAL CYLINDER VALVE FOR OXYGEN GAS

PIN INDEX (HANDWHEEL TYPE) (O-RING SEAL TYPE)

LIST FEATURES

PV1 SERIES, MANIFOLD VALVE FOR CYLINDER BUNDLES AND FILLING SYSTEMS

SUITABLE FOR SEVERAL GASES

AVAILABLE WITH ONE, TWO, OR THREE OUTLETS

AVAILABLE WITH ALL THREAD SPEC CONFIGURATION

DESIGN SPECIFICATIONS

MAXIMUM OPERATING PRESSURE: 150 BAR CLOSING TORQUE: -

OPERATING TEMPERATURE: -20 TO 65 °C MAX. TORQUE: -

MATERIALS COMPONENTS INLET OUTLET OPERATING

PRD SCG DRAWING
VALVE BODY: FORGED BRASS EN12165 ALLOY SEAL SEAT: POLYAMIDE CONNECTION* CONNECTION PRESSURE

GLAND NUT: BRASS O-RING SEAL: SYNTHETIC RUBBER

3/4”-16 UNF-2A CGA No.870 150 bar N/A D-VO2-H.2
HANDWHEEL: ALUMINIUM STEM: BRASS

! Pg.67
 WWW.SCGTHAI.COM

99 Moo 20, Lumlookka Sub-district,

Lumlookka District,
Patumtani 12150, Tailandia

[email protected]
+66 20962244
[email protected]
Ext. 240,242,243,244
Fax/+66 200 16478