TECHNICAL DATA SHEET

DuraPro ASA

DESCRIPTION
DuraPro ASA is a weatherproof and UV-resistant copolymer developed for in-
dustrial applications. It is characterized by high process reliability and is ideally
suited for mechanically highly stressed components. The material is electri-
cally insulating. DuraPro ASA is optimized for good layer adhesion, thermal
stability, better flow properties and lower warping tendencies. The raw mate-
rial is approved according to the REACH-, RoHS- and FDA-Standards.

FEATURES
- Optimized for FFF/FDM-process
- Good mechanical properties
- Good chemical resistance
- Flame retardant according to UL94 HB TEMPERATURE
RESISTANCE 6
PROPERTIES 1
TEST METHOD UNIT VALUE
EASE OF
PRINTING 6
Flexural modulus (E-Modulus) ASTM D790 MPa 2300
Flexural strength
Tensile modulus (E-Modulus)
ASTM D790
ASTM D638
MPa
MPa
78
2200
VISUAL
QUALITY 7
Tensile strength ASTM D638 MPa 49
Elongation at yield
Nominal elongation at break
ASTM D638
ASTM D638
%
%
6
20
LAYER
ADHESION 8
Notched impact strength ASTM D256 kj/m² 140 @ 23°C
Notched impact strength
VICAT A (VST)
ASTM D256
ASTM D1525
kj/m²
oC
29 @ -30°C
96*
IMPACT
RESISTANCE 8
Melting temperature ISO 3146-C oC 180-200
MFR ASTM D1238 g/cm³ 20
MAXIMUM
STRESS 6
HDT/B ASTM D648 oC 96
Shrinking ASTM D955 % 0.4
Density ASTM D792 g/cm³ 1.05
ELONGATION
AT BREAK 6
Hardness Rockwell ASTM D785 R-Scale 105
Flammability UL94 HB -
PRINT SETTINGS
*Temperature resistance tested at a minimum wall thickness of 4 mm.
Nozzle 215-240°C
Heatbed 100-110°C
Adhesive recommended
CERTIFICATIONS & ADDITIONAL INFORMATION 2 Speed 40-60mm/s
Cooling 0-30%
Recommended settings for printers with a 0.4mm
Nozzle. Max. 50% layerheight. Optimal print set-
tings may vary between different printers and also
CHEMICAL UV-RESISTANT FLAMERETARDANT depend on environmental factors.
RESISTANT UL94 HB

STORAGE AND SHELF LIFE NEED HELP?

If you have any question
Store in a dry room at room temperature (18-27°C / 65-80°F). Keep out of
about the product and/or
direct heat and sunlight. When stored correctly, this material has a shelf life
you are experiencing an
of 2 years.
issue, please contact us
via [email protected]
1. Additional info in our regulatory, additional information and chemical resistance data sheets.
2. Certifications depend on colors in final product. More info in the additional information sheet.

July 2020
www.extrudr.com Page 1/1