Scribd
Upload
109 views6 pages

SecuriFire VirtualMic en

SecuriFire VirtualMIC is a program that allows operation of a SecuriLan system from a PC by replicating the interface of an MIC11/MIC711 keypad controller. It connects to the SecuriLan over the network using a username and password. Once connected, the VirtualMIC interface functions the same as the physical device. The SecuriFire Studio software must first project a VirtualMIC onto the SecuriLan configuration in order to enable the connection from the VirtualMIC program.

Uploaded by

CristianLeotescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views6 pages

SecuriFire VirtualMic en

SecuriFire VirtualMIC is a program that allows operation of a SecuriLan system from a PC by replicating the interface of an MIC11/MIC711 keypad controller. It connects to the SecuriLan over the network using a username and password. Once connected, the VirtualMIC interface functions the same as the physical device. The SecuriFire Studio software must first project a VirtualMIC onto the SecuriLan configuration in order to enable the connection from the VirtualMIC program.

Uploaded by

CristianLeotescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

SecuriFire VirtualMIC

Print version

SecuriFire VirtualMic Help


Version: 2.4.x

Last update: 11.03.2021

2 /6 SecuriFire VirtualMic Help ...               ......


SecuriFire VirtualMIC

Purpose
SecuriFire VirtualMIC is a stand-alone program that enables you to operate a SecuriLan from your PC. It rep-
licates an MIC11 / MIC711.

The following topics are discussed in this section:


Design of the user interface
Establishing connection
Operation
Projection in SecuriFire Studio

Precondition
-

Design of the user interface

The user interface of SecuriFire VirtualMIC corresponds to that of the real MIC11 / MIC711.

Above left is the toolbar with which connections can be established and closed:

Toolbar

Displays a list of the saved connections. You can select the connection to
Edit connection which you want to establish the communication. Connections can be cre-
ated, deleted and edited.

Establishing connection Establishes the selected connection.

Establishing SOP1 con- Establishes a SOP connection to an SCP. No connection has to be para-
nection meterised and selected; only the SMS token must be entered.

1Secure Online Platform (SecuriCloud)

SecuriFire VirtualMic Help 3 /6


Toolbar

Terminate connection Disconnects the existing connection.

Turn off acoustic Toggles the sound of the SecuriFire VirtualMIC off and on.

Open help Opens the SecuriFire VirtualMIC Help.

Establishing connection

If an SCP has the corresponding projection, a new connection can be established via the toolbar in SecuriFire Vir-
tualMIC. “Edit connection” opens the overview of already created connections.

In this overview new connections can be created, and already created connections can be selected (highlighted in yel-
low). The icons with which the connections are managed and their functions are listed below.

Connection data

Adds a new connection to a SCP. For this purpose an entry mask appears
Add connection
with all of the necessary entry parameters.

Edits an already created connection. For this purpose the same entry
Edit connection
mask as for creating the connection appears.

Delete connection Deletes an already created connection.

Creates a link for the connection on the desktop. Actuating this link starts
Create desktop link the SecuriFire VirtualMIC and the corresponding connection is auto-
matically established.

Establishes the concerned connection. This procedure can also be started


Establish connection by selecting the connection (highlighted yellow) and then actuating the
icon on the toolbar (top left).

All connections have a unique number. If a connection is deleted, its number will no longer be re-assigned. The
unique number can be transmitted to the SecuriFire VirtualMIC as start parameter, whereby the concerned con-
nection is established automatically when starting (similar to actuating a created desktop link).

Creating and managing a connection is performed with the following entry mask:

The following icons are available for the required parameters:

4 /6 SecuriFire VirtualMic Help ...               ......


Connection data

Connection name Any name can be given to a connection

IP address and port of the SCP to which you want to establish a con-
IP
nection.

User name of the remote access user of the SCP authorised for such a con-
User name
nection.

Password Password of the user.

Operation

When a connection has been successfully established, it is displayed in the SecuriFire VirtualMIC as it is in the
real MIC11.

The operation of the SecuriFire VirtualMIC corresponds to that of a real MIC. Clicking the buttons on the interface
actuates them. Numbers can be entered on the PC keyboard.

You can browse lists in the display with the SecuriWheel: The SecuriWheel can be turned by pressing the mouse but-
ton or by rotating the scroll wheel. Clicking the SecuriWheel selects an entry.

You can use the arrow keys to navigate up and down in the display of the VirtualMIC.

You can also navigate with the mouse scroll wheel when the cursor is anywhere on the VirtualMIC.

A menu item can be clicked directly in the display of the VirtualMIC.

Notice

The user name and password enable only the connection but do not switch to the authorisation level assigned to
the user. To access a different user level, you must change authorisation level as with the real MIC.

Projection in SecuriFire Studio

For the SecuriFire VirtualMIC to establish a connection to an SCP, it must be planned in SecuriFire Studio
accordingly: At least one of the four possible VirtualMICs has to be activated on the MCB15 (1). The activated Vir-
tualMICs then appear in the project tree (2).

A VirtualMIC is handled like a real MIC and must have a user assigned to it (3)

SecuriFire VirtualMic Help 5 /6


For this user to be able to establish a connection to the SCP with SecuriFire VirtualMIC, the user must have a
name (4) and the authorisation for Remote access must be switched on. In addition, a password has to be defined
for establishing the connection (5).

The projection described above must then be loaded to the system. Afterwards, a connection to this SCP can be
established with the SecuriFire VirtualMIC.

Similar Topics
-

6 /6 SecuriFire VirtualMic Help ...               ......

You might also like