Ebara Quick Discharge Connector
Ebara Quick Discharge Connector
Ebara Quick Discharge Connector
Contents
Project: Model: Chk’d: Date:
Model
LM50
LM65
LM80
LL80
LL100
LL125
LL150
LL250U
LL300U
LL150YU
LL200YU
LL250YU
LL300YU
Section Page
Specifications 2-279
Outline Drawings 2-280
Sectional View 2-286
A. General:
The guide rail system design shall be such that the pump will be automatically connected to the discharge piping
when lowered into place on the discharge connection. The pump shall be easily removable for inspection or service,
requiring no bolts, nuts, or other fasteners to be disconnected, or the need for personnel to enter the wet well.
Intermediate guide brackets are recommended for rail lengths over 15 feet. Guide rails are not part of the pump
package and shall be supplied by others.
The QDC shall be manufactured of cast iron, ASTM A48 Class 30. It shall be designed to adequately support the
guide rails, discharge piping, and pumping unit under both static and dynamic loading conditions with support legs
that are suitable for anchoring it to the wetwell floor.
The face of the inlet QDC flange shall be perpendicular to the floor of the wetwell.
Sealing of the pumping unit to the QDC shall be accomplished by a single, linear, downward motion of the pump.
The entire weight of the pump unit shall be guided to and wedged tightly against the inlet flange of the QDC, making
metal to metal contact with the pump discharge forming a seal without the use of bolts, gaskets or O-rings.
A stainless steel lifting chain of adequate length for removing and installing the pump unit is recommended. The chain
shall have a round link with a 2-1/4'' inside diameter every two feet. This link will allow for a sliding pinch bar through
the link to pick the chain, more than once if necessary, at multiple intervals during pump removal and installation.
50DLU, 1 to 2HP
80DLU, 2HP
80DLMU, 2 to 5HP
100DLU, 2 to 5HP
50DVU, 1 to 3HP
80DVU, 2 to 5HP
80DVCU, 3 to 5HP
80DVBU, 3 to 5HP
32DGUII, 2HP
32DGFU, 2HP
50DGFU, 3 to 5HP Bolts 2-1/2 (12)
50DLFU, 2HP
80DLFU, 2HP
80DLMFU, 2 TO 71/2HP
100 DLFU, 2 to 5HP
50DVFU, 2 to 3HP
80DVFU, 2HP
80DVCFU, 3 to 5HP
80DVBFU, 3 to 5HP
80DVFU, 71/2HP
2-5/8 (16)
Dimensions: inch
MODEL A C E H J K L1 L2 N P S WEIGHT Lb
LM50 711/16 19/16 45/16 1
/2 43/4 2 81/4 71/2 41/2 55/16 61/2 24
LM65 87/16 13/4 51/8 1
/2 51/2 21/2 91/16 81/4 43/4 511/16 71/2 31
LM80 87/16 115/16 51/2 9
/16 61/8 3 105/8 95/8 415/16 67/8 91/16 37
Dimensions: mm
MODEL A C E H J K L1 L2 N P S WEIGHT kg
LM50 195 40 110 12 120 50 210 190 115 135 165 11
LM65 215 45 130 12 140 65 230 210 120 145 190 14
LM80 215 50 140 15 155 80 270 245 125 175 230 17
80DLU, 3 to 5HP
80DLCMFU, 10 to 15HP
100DVU, 5HP
80DLFU, 3 to 30HP
100DLMFU, 2 to 30HP
80DVFU, 10HP
80DVBFU, 15HP
80DVCFU, 15 to 30 HP
100DVFU, 5 to 10HP
100DVBFU, 15HP
Bolts 4-5/8 (16)
100DVCFU, 15 to 20HP
100DVDFU, 15 to 30HP
4-5/8 (16)
Dimensions: inch
MODEL A1 A2 B1 B2 E H J K L1 L2 L3 M1 M2 P S WEIGHT Lb
LL80 143/16 61/2 91/16 71/16 51/2 /16
9
61/8 3 149/16 123/16 33/4 153/8 43/4 97/16 101/16 97
LL100 143/16 61/2 91/16 71/16 65/16 3
/4 67/8 4 1415/16 125/8 41/8 153/8 41/8 97/16 107/16 101
Dimensions: mm
MODEL A1 A2 B1 B2 E H J K L1 L2 L3 M1 M2 P S WEIGHT kg
LL80 360 165 230 180 140 15 155 80 370 310 95 390 120 240 255 44
LL100 360 165 230 180 160 19 175 100 380 320 105 390 105 240 265 46
100DLFU, 40 to 60HP
77/8 (200)
315/16 (100)
4-5/8 (16)
Dimensions: inch
MODEL A1 A2 B1 B2 E H J K L1 L2 L3 M1 M2 P S WEIGHT Lb
LL100 143/16 61/2 91/16 71/16 65/16 /4
3
67/8 4 1415/16 125/8 41/8 153/8 41/8 97/16 107/16 101
Dimensions: mm
MODEL A1 A2 B1 B2 E H J K L1 L2 L3 M1 M2 P S WEIGHT kg
LL100 360 165 230 180 160 19 175 100 380 320 105 390 105 240 265 46
57/8
Bolts 2-5/8 (16)
4-5/8 (16)
Dimensions: inch
MODEL A1 A2 B1 B2 C D E J K L1 L2 L3 M1 M2 N P S WEIGHT Lb
LL125 197/8 195/16 13 11 81/16 61/2 71/2 81/4 5 1615/16 153/16 315/16 133/4 711/16 23/4 117/16 141/4 143
LL150 201/2 201/16 133/4 1113/16 811/16 611/16 811/16 913/16 6 189/16 1615/16 47/16 143/16 81/16 215/16 125/8 1515/16 176
Dimensions: mm
MODEL A1 A2 B1 B2 C D E J K L1 L2 L3 M1 M2 N P S WEIGHT kg
LL125 505 490 330 280 205 165 190 210 125 430 385 100 350 195 70 290 362 65
LL150 520 510 350 300 220 170 220 250 150 472 430 112 360 205 75 320 405 80
175/16 (440)
31/8 (80)
41/16 (103)
4-5/8 (16)
Dimensions: inch
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT Lb
LL250U 8 10 311/8 259/16 1911/16 221/16 219/16 279/16 57/8 3615/16 171/8 113/4 133/4 175/16 331
LL300U 10 12 325/16 263/4 2213/16 253/16 2511/16 311/2 67/8 39 185/16 113/4 1615/16 1711/16 441
Dimensions: mm
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT kg
LL250U 200 250 790 650 500 560 548 700 150 938 435 298 350 440 150
LL300U 250 300 820 680 580 640 653 800 175 991 465 298 430 450 200
150DLFU, 40 to 60HP
200DLFU, 40 to 60HP 115/16 (50)
91/16 (230)
Bolts 2-5/8 (16)
415/16 (125)
25/8 (67)
4-15/16 (24)
Dimensions: inch
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT Lb
LL150YU 6 6 201/2 161/8 143/16 161/8 193/4 1911/16 415/16 295/16 1213/16 11 123/16 153/16 179
LL200YU 6 8 215/8 175/16 169/16 181/2 215/16 235/8 415/16 313/4 14 11 133/4 163/4 227
Dimensions: mm
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT kg
LL150YU 150 150 520 410 360 410 502 500 125 745 325 280 310 385 81
LL200YU 150 200 550 440 420 470 542 600 125 807 355 280 350 425 103
250DLFU, 40 to 60HP
300DLFU, 40 to 60HP
31/8 (80)
4-13/16 (30)
Dimensions: inch
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT Lb
LL250YU 8 10 311/8 259/16 1911/16 221/16 237/16 279/16 57/8 401/16 171/8 1415/16 133/4 175/16 344
LL300YU 10 12 325/16 263/4 2213/16 253/16 279/16 311/2 67/8 4213/16 185/16 1415/16 1615/16 215/8 450
Dimensions: mm
MODEL ø1 ø2 A1 A2 B1 B2 L1 L2 L3 M1 M2 N P S WEIGHT kg
LL250YU 200 250 790 650 500 560 595 700 150 1018 435 380 350 440 156
LL300YU 250 300 820 680 580 640 700 800 175 1087 465 380 430 550 204