PERRY JOHNSON LABORATORY

ACCREDITATION, INC.

Certificate of Accreditation
Perry Johnson Laboratory Accreditation, Inc. has assessed the Organization:

Red Ball Technical Gas Services.

555 Craig Kennedy Way, Shreveport, LA 71107

and hereby declares that the Organization is accredited in accordance with

the recognized International Standard:

ISO 17034:2016
& the relevant requirements of ISO/IEC 17025:2017

This accreditation demonstrates technical competence for a defined scope and the
operation of a reference material producer quality management system
(as outlined by the joint ISO-ILAC-IAF Communiqué dated 2017):

Gas Mixture Reference Materials and Certified Reference Materials

(As detailed in the supplement)

Accreditation claims for such reference material production shall only be made from addresses referenced within this certificate.
This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby
covenants with the Accreditation Body’s duty to observe and comply with the said rules.

For PJLA:

Initial Accreditation Date: Issue Date: Expiration Date:

October 12, 2022 October 12, 2022 November 30, 2024

Accreditation No.: Certificate No.:

Tracy Szerszen
President 62754 L22-692

Perry Johnson Laboratory The validity of this certificate is maintained through ongoing assessments based
Accreditation, Inc. (PJLA) on a continuous accreditation cycle. The validity of this certificate should be
confirmed through the PJLA website: www.pjlabs.com
755 W. Big Beaver, Suite 1325
Troy, Michigan 48084
Page 1 of 2
 Certificate of Accreditation: Supplement
Red Ball Technical Gas Services
555 Craig Kennedy Way, Shreveport, LA 71107
Contact Nam: Ms. LaMeka Dennis Phone: 318-425-6300

Accreditation is granted to the Organization for the production of certified reference material
and reference material as follows:

REFERENCE ITEMS, MATRIX SPECIFIC SPECIFICATION, RANGE (IF REFERENCE VALUE CRM
MATERIAL MATERIALS OR CONSTITUENTS STANDARD METHOD APPLICABLE) CAPABILITY OR
CATEGORIES PRODUCTS OR PROPERTIES OR TECHNIQUE RM
USED
Chemical- Gas Calibration Gas Gas Mixture FTIR - Fourier 1.6 µmol/mol to (4.84 x 10-1 + 1.00 RM/CRM
mixtures Cylinder Concentration Transform Infrared 250 000 x 10-2C) µmol/mol
Spectroscopy µmol/mol
Electrolytic 1.5 µmol/mol to (4.85 x 10-1 + 1.02
Moisture Analyzer 100 µmol/mol x 10-2C) µmol/mol
Flame Ionization 0.1 µmol/mol to (1.66 x 10-2 + 1.38
Detector 30 µmol/mol x 10-2C) µmol/mol
Electrochemical 0.2 µmol/mol to (4.90 x 10-2 + 1.50
Oxygen Analyzer 1 000 000 x 10-2C) µmol/mol
µmol/mol

0.4 µmol/mol to (1.15 x 10-1 + 1.21

500 mmol/mol x 10-2C) µmol/mol
Paramagnetic 20 mmol/mol to (1.14 + 8.26 10-
Oxygen Analyzer 250 mmol/mol 3C) mmol/mol
GC with TCD 2.08 mmol/mol to (6.60 x 10-1 + 1.43
1 000 mmol/mol x 10-2C)
mmol/mol

GC with FID 0.29 mmol/mol to (9.07 x 10-2 + 1.49

1 000 mmol/mol x 10-2C) mmol/mol

Gravimetric Scale 1 µmol/mol to 0.3 µmol/mol

1 000 000
µmol/mol
Chemiluminescent 1.0 µmol/mol to (7.03 x 10-1 + 1.17
5 000 µmol/mol x 10-2C) µmol/mol
NO Analyzer 1.2 µmol/mol to (3.66 x 10-1 + 1.13
100 µmol/mol x 10-2C) µmol/mol

1.0 µmol/mol to (7.03 x 10-1 + 1.17

5 000 µmol/mol x 10-2C) µmol/mol
NDIR NO 60 µmol/mol to (5.31 x 10-1 + 1.10
Analyzer 1 500 µmol/mol x 10-2C) µmol/mol
Gas Correlation IR 100 µmol/mol to (1.49 + 1.11 x 10-
2
2 000 µmol/mol C) µmol/mol
NDIR SO2 100 µmol/mol to (1.22 + 1.09 x 10-
2
Analyzer 2 000 µmol/mol C) µmol/mol
NDIR CO2 0.2 cmol/mol to (5.74 + 1.29 x 10-
2
Analyzer 0.5 cmol/mol C) cmol/mol

1 cmol/mol to (5.74 + 1.29 x 10-

0.5 cmol/mol 2C) cmol/mol

Issue 10/2022 This supplement is in conjunction with certificate #L22-692 Page 2 of 3

 Certificate of Accreditation: Supplement
Red Ball Technical Gas Services
555 Craig Kennedy Way, Shreveport, LA 71107
Contact Nam: Ms. LaMeka Dennis Phone: 318-425-6300

Accreditation is granted to the Organization for the production of certified reference material
and reference material as follows:

1. Per APLAC TC008 sections 6.5 & 6.6 “For CRMs, the scope of accreditation shall be expressed in terms of
a best Reference Value Capability which shall include the RMP‟s estimate of its least uncertainty of
measurement (UCRM) for each property value’s range it reports. … CRMs that are an identification value
(such as species identification) or where the property value is an ordinal number (such as a color fastness
chart) do not require an uncertainty of measurement to be stated in the scope of accreditation.” Per section
6.3 “An accredited RMP is not permitted to report on a RM certificate an uncertainty of property value
which is less than or better than that stated in its scope of accreditation.” Per section 6.12 “The uncertainty
covered by the Reference Value Capability shall be expressed as the expanded uncertainty having a specific
coverage probability (often 95 %). The unit of the uncertainty shall always be the same as that of the
property value or in a term relative to the property value, for example a percentage or ratio of the property
value.” See sections 6.7 through 6.11 for additional information.

Issue 10/2022 This supplement is in conjunction with certificate #L22-692 Page 3 of 3