Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Drafts - Leavenworth Generator Base Plate

    Uploaded by

    Johnny
    The document provides the results of an anchor design calculation for a generator base plate using Hilti HAS-V-36 1/2"x6-1/2" anchors in cracked concrete with a compressive strength of 2,500 psi. The calculation shows that the anchor design meets the criteria for a tension load of 3,100 lbs and shear load of -3,100 lbs with a maximum utilization of 79%. It includes warnings to check all details and limitations of the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Drafts - Leavenworth Generator Base Plate

    Uploaded by

    Johnny
    25 views4 pages
    The document provides the results of an anchor design calculation for a generator base plate using Hilti HAS-V-36 1/2"x6-1/2" anchors in cracked concrete with a compressive strength of 2,500 psi. The calculation shows that the anchor design meets the criteria for a tension load of 3,100 lbs and shear load of -3,100 lbs with a maximum utilization of 79%. It includes warnings to check all details and limitations of the software.

    Original Title

    Drafts_Leavenworth Generator Base Plate

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides the results of an anchor design calculation for a generator base plate using Hilti HAS-V-36 1/2"x6-1/2" anchors in cracked concrete with a compressive strength of 2,500 psi. The calculation shows that the anchor design meets the criteria for a tension load of 3,100 lbs and shear load of -3,100 lbs with a maximum utilization of 79%. It includes warnings to check all details and limitations of the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views4 pages

    Drafts - Leavenworth Generator Base Plate

    Uploaded by

    Johnny
    The document provides the results of an anchor design calculation for a generator base plate using Hilti HAS-V-36 1/2"x6-1/2" anchors in cracked concrete with a compressive strength of 2,500 psi. The calculation shows that the anchor design meets the criteria for a tension load of 3,100 lbs and shear load of -3,100 lbs with a maximum utilization of 79%. It includes warnings to check all details and limitations of the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Hilti PROFIS Engineering 3.0.

    57

    www.hilti.com
    Company: Page: 1
    Address: Specifier:
    Phone I Fax: | E-Mail:
    Design: Leavenworth Generator Base Plate Date: 3/20/2020
    Fastening point:

    Specifier's comments:

    1 Input data
    Anchor type and diameter: HIT-RE 500 V3 + HAS-V-36 (ASTM F1554 Gr.36) 1/2
    Item number: 2198022 HAS-V-36 1/2"x6-1/2" (element) / 2123401
    HIT-RE 500 V3 (adhesive)
    Effective embedment depth: hef,act = 4.500 in. (hef,limit = - in.)
    Material: ASTM A 1554 Grade 36
    Evaluation Service Report: ESR-3814
    Issued I Valid: 1/1/2019 | 1/1/2021
    Proof: Design Method ACI 318-14 / Chem
    Stand-off installation: eb = 0.000 in. (no stand-off); t = 0.500 in.

    Anchor plate :
    R lx x ly x t = 8.000 in. x 8.000 in. x 0.500 in.; (Recommended plate thickness: not calculated)

    Profile: no profile
    Base material: cracked concrete, 2500, fc' = 2,500 psi; h = 30.000 in., Temp. short/long: 32/32 °F
    Installation: hammer drilled hole, Installation condition: Dry
    Reinforcement: tension: condition B, shear: condition B; no supplemental splitting reinforcement present
    edge reinforcement: none or < No. 4 bar

    R
    - The anchor calculation is based on a rigid anchor plate assumption.

    Geometry [in.] & Loading [lb, in.lb]

    Input data and results must be checked for conformity with the existing conditions and for plausibility!
    PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

    1
    Hilti PROFIS Engineering 3.0.57

    www.hilti.com
    Company: Page: 2
    Address: Specifier:
    Phone I Fax: | E-Mail:
    Design: Leavenworth Generator Base Plate Date: 3/20/2020
    Fastening point:

    1.1 Design results


    Case Description Forces [lb] / Moments [in.lb] Seismic Max. Util. Anchor [%]
    1 Combination 1 N = 3,100; Vx = 0; Vy = -3,100; no 79
    Mx = 0; My = 0; Mz = 0;
    Nsus = 0; Mx,sus = 0; My,sus = 0;

    Input data and results must be checked for conformity with the existing conditions and for plausibility!
    PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

    2
    Hilti PROFIS Engineering 3.0.57

    www.hilti.com
    Company: Page: 3
    Address: Specifier:
    Phone I Fax: | E-Mail:
    Design: Leavenworth Generator Base Plate Date: 3/20/2020
    Fastening point:

    2 Proof I Utilization (Governing Cases)


    Design values [lb] Utilization

    Loading Proof Load Capacity bN / b V [%] Status


    Tension Concrete Breakout Failure 3,100 9,835 32 / - OK
    Shear Concrete edge failure in direction y- 3,100 4,052 - / 77 OK

    Loading bN bV z Utilization b N,V [%] Status


    Combined tension and shear loads 0.315 0.765 5/3 79 OK

    3 Warnings
    • Please consider all details and hints/warnings given in the detailed report!

    Fastening meets the design criteria!

    Input data and results must be checked for conformity with the existing conditions and for plausibility!
    PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

    3
    Hilti PROFIS Engineering 3.0.57

    www.hilti.com
    Company: Page: 4
    Address: Specifier:
    Phone I Fax: | E-Mail:
    Design: Leavenworth Generator Base Plate Date: 3/20/2020
    Fastening point:

    4 Remarks; Your Cooperation Duties


    • Any and all information and data contained in the Software concern solely the use of Hilti products and are based on the principles, formulas and
    security regulations in accordance with Hilti's technical directions and operating, mounting and assembly instructions, etc., that must be strictly
    complied with by the user. All figures contained therein are average figures, and therefore use-specific tests are to be conducted prior to using
    the relevant Hilti product. The results of the calculations carried out by means of the Software are based essentially on the data you put in.
    Therefore, you bear the sole responsibility for the absence of errors, the completeness and the relevance of the data to be put in by you.
    Moreover, you bear sole responsibility for having the results of the calculation checked and cleared by an expert, particularly with regard to
    compliance with applicable norms and permits, prior to using them for your specific facility. The Software serves only as an aid to interpret norms
    and permits without any guarantee as to the absence of errors, the correctness and the relevance of the results or suitability for a specific
    application.
    • You must take all necessary and reasonable steps to prevent or limit damage caused by the Software. In particular, you must arrange for the
    regular backup of programs and data and, if applicable, carry out the updates of the Software offered by Hilti on a regular basis. If you do not use
    the AutoUpdate function of the Software, you must ensure that you are using the current and thus up-to-date version of the Software in each
    case by carrying out manual updates via the Hilti Website. Hilti will not be liable for consequences, such as the recovery of lost or damaged data
    or programs, arising from a culpable breach of duty by you.

    Input data and results must be checked for conformity with the existing conditions and for plausibility!
    PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

    You might also like