XT25BG60 04

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Driver Specification Sheet

Model No:: XT25BG60-04 Rev: 1


Product Line: Tymphany Last Update: 2017-05-24 09:25:54

Product Description

This member of the XT tweeter family utilizes two Tymphany technologies to deliver exceptional sound
quality: the ring radiator patent, and the central waveguide patent. This model features a 4 ohm 25 mm
voice coil, mounted in a ferrite magnet motor. The tweeter also features a rear chamber to create
extended low frequency response. The faceplate features recessed mounting holes which minimizes
reflections off of mounting screws.

Mechanical Drawing

Specifications
DC Resistance Revc Ohms 2.99 5.0% Energy Bandwidth Product EBP (1/Qes)*fs
Minimum Impedance Zmin Ohms 3.44 7.5% Moving Mass Mms g 0.4
Voice Coil Inductance Le mH 0.01 Suspension Compliance Cms um/N 203.4
Resonant Frequency Fs Hz 589.1 15% Effective Cone diameter D cm 3.24
Mechanical Q Factor Qms 1.31 Effective Piston Area Sd cm^2 8.2
Electrical Q Factor Qes 0.43 Effective Volume Vas L 0.02
Total Q Factor Qts 0.32 Motor Force Factor BL Tm 3.07
Ratio Fs/Qts F Fs/Qts 1840.94 Motor Efficiency Factor ß (T*M^2)/Ohms 3.2
Half Space Sensitivity @2.83V [email protected]/1M dB 92.26 +/- 1.0db Voice coil former Material VCfm ASV
Half Space Sensitivity @1W/1M db@1W/1M dB 88.6 +/- 1.0db Voice coil inner diameter VCd mm 25.76
Gap Height Gh mm 2 Rated Noise Power P W 100
Maximum Linear Excursion Xmax mm 0.1 Test Spectrum Bandwidth 500Hz - 20kHz
Ferrofluid Type FF Driver Size Inch 25 mm
Driver Mass Kg 0.78

Frequency and Impedance Response

Tymphany HK LTD
Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong
E-mail: [email protected]

You might also like