Week 4 Prelim

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

STUDENT ACTIVITY SHEETS

Name Course & Yr. Section


Course BES-CAD Computer-Aided Drafting
Topic PRELIM EXAM Week 4
Intended Learning Outcomes Materials
At the end of the exam, you should be able to: Computer
o Assess the level of knowledge and understanding to answer most (Desktop or
or all of the questions correctly. Laptop), Student
o Assess the level of skills to perform most or all of the required Activity Sheet,
activities. AutoCAD Software
References
1. AutoCAD 2021 User’s Guide © Autodesk, Inc. 2020 All rights reserved

PRELIM EXAM
Multiple Choice:

Review the previous lessons (you may also refer to other online and offline resources to enhance
your knowledge and understanding) then answer the questions below by encircling the letter
matching the best (or what you think is the right) answer.

1. The _______ button is used to begin a new drawing.


a. Command b. Drawing Tabs c. Ribbon d. Start Drawing
2. You can click the _______ to switch between several open drawing files and the Start tab.
a. Command b. Drawing Tabs c. Ribbon d. Start Drawing
3. You can click the tabs in the _______ to access the basic commands in AutoCAD.
a. Command b. Drawing Tabs c. Ribbon d. Start Drawing
4. At the heart of AutoCAD is the _______ window, which is normally docked at the bottom of the
application window.
a. Command b. Drawing Tabs c. Ribbon d. Start Drawing
5. When you look for an option, right-clicking the _______ will display a menu that provides
relevant commands and options depending on where your cursor is located.
a. Keyboard b. Mouse c. Pen d. Screen
6. You can easily conform to industry or company standards by specifying settings for text,
dimensions, linetypes, and several other features of _______.
a. Display b. Models c. New Drawings d. Template
7. You can save any drawing (.dwg) file as a drawing _______ (.dwt) file.
a. Display b. Models c. New Drawings d. Template
8. After you start a new drawing, you'll first decide what the length of one _______ represents—an
inch, a foot, a centimeter, a kilometer, or some other _______ of length.
a. Amount b. Degree c. Measure d. Unit
9. After you decide what unit of length that you want to use, the UNITS command lets you control
several unit _______ settings
a. Display b. Models c. New Drawings d. Template
10. Always create your _______ at full size (1:1 scale).
a. Display b. Models c. New Drawings d. Template
11. You can change your _______ by using the mouse wheel.
a. Cursor b. Modify c. Places d. View
12. You can view, create, and _______ drawings on any devices while on a job site, the shop floor, at a
meeting, or when travelling.
a. Cursor b. Modify c. Places d. View
13. You can add an account with a cloud storage provider to your _______ bar in AutoCAD file
selection dialog boxes for direct navigation to the drawings in your cloud storage account.
a. Cursor b. Modify c. Places d. View
14. When you zoom in or out, the location of the _______ is important.
a. Cursor b. Modify c. Places d. View
15. Access your drawings from a remote location using the _______ to Web & Mobile and Open from
Web & Mobile commands.
a. Download b. Save c. Send d. Upload
Student Activity Sheets for BES-CAD Computer-Aided Drafting by Arwin Z. Visitacion 1
16. You only need to know a few _______ objects in AutoCAD to create most 2D drawings.
a. Geometric b. Hatch c. Linear d. Rectangular
17. The _______ is the most basic and common object in AutoCAD drawings.
a. Circle b. Line c. Polyline d. Rectangle
18. Press F7 in AutoCAD to turn on/off the _______ .
a. Grid Display b. Lattice Display c. Net Display d. Web Display
19. You click the _______ tool in AutoCAD to draw a line.
a. CIRCLE b. LINE c. POLYLINE d. RECTANGLE
20. Lines in AutoCAD can serve as _______ and construction geometry.
a. Location b. Orientation c. Position d. Reference
21. The _______ command in AutoCAD requires you to specify a center point and a radius.
a. CIRCLE b. LINE c. POLYLINE d. RECTANGLE
22. A _______ is a connected sequence of line or arc segments that is created as a single object.
a. Circle b. Line c. Polyline d. Rectangle
23. A fast way to create closed _______ polylines is to use the RECTANG or REC command.
a. Geometric b. Hatch c. Linear d. Rectangular
24. The _______ icon indicates the direction of the positive X and Y axis for any coordinates that you
enter, and it also defines the horizontal and vertical directions in a drawing.
a. Cartesian Coordinate System (CCS) c. User Coordinate System (UCS)
b. Global Coordinate System (GCS) d. World Coordinate System (WCS)
25. A _______ is a single, compound object that covers a specified area with a pattern of lines, dots,
shapes, a solid fill color, or a gradient fill.
a. Geometric b. Hatch c. Linear d. Rectangular

Performance Test:

Please refer to the AutoCAD Lessons.pdf file posted in your Google Classroom create the
AutoCAD drawings on pages 10, 14, 15, 20, 24 and 30.

Layers, text, dimensions and scaling are NOT required for the first five (5) drawings on pages 10,
14, 15, 20 and 24.

The objects on drawings 5 and 6 on pages 24 and 30 are the same except that layers, text,
dimensions and scaling are only required for the drawing objects on page 30 based on the step-
by-step instructions given in the AutoCAD Lessons.pdf file.

Review the step-by-step instructions in the AutoCAD Lessons.pdf file to make sure you can
complete the six (6) required AutoCAD drawings.

Save your AutoCAD drawing files with your Family Name, First Name, Course Year-Section, such
as the following:
o VisitacionArwin BSCAD I-A Drawing1.dwg
o VisitacionArwin BSCAD I-A Drawing2.dwg
o VisitacionArwin BSCAD I-A Drawing3.dwg
o VisitacionArwin BSCAD I-A Drawing4.dwg
o VisitacionArwin BSCAD I-A Drawing5.dwg
o VisitacionArwin BSCAD I-A Drawing6.dwg
Attach the files when you turn in your activity sheets in Google Classroom.

Student Activity Sheets for BES-CAD Computer-Aided Drafting by Arwin Z. Visitacion 2

You might also like