0% found this document useful (0 votes)
80 views1 page

Master 50HZ

Uploaded by

Adriano ciriaco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
80 views1 page

Master 50HZ

Uploaded by

Adriano ciriaco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

No: PD505182-INT Revision 0 2015.12 50 Hz 8105.

182

Master
Electrical submersible drainage pump

H (m)
100

80 SH

60
H

40
N

20

0
0 10 20 30 40 50 60 Q (l/s)

P{ (kW)
12

10
50 Hz N H SH
N
8 H
Discharge connection 6´´ 4´´ 3´´
SH
Rated power P} [kW] 10 10 10 6
Max. power consumption P{ [kW] 11,7 11,7 11,7
Shaft speed [r.p.m.] 2855 2855 2855
4
Rated current at 230V 33 A 33 A 33 A
2
Rated current at 400V 19 A 19 A 19 A
Rated current at 500V 15 A 15 A 15 A 0
Rated current at 1000V 8A 8A 8A 0 10 20 30 40 50 60 Q (l/s)
Solids passage [mm] 10 10 10
Height [mm] 832 832 887
Diameter [mm] 346 346 346 ISO 9906/A
Weight [kg] 80 80 98
Other voltages on request
Pump types Shaft seals
N: normal pressure, H: high pressure, SH: super high pressure Cartridge seal: pre-assembled double mechnical seal running in an oil
compartment
Classification Material lower seal: silicon carbide - silicon carbide
Electrical submersible drainage pump Material upper seal: tungsten carbide - aluminium oxide
Protection class: IP 68
Bearings
Electrical motor Ball bearings with C3 clearance
Squirrel cage induction motor, insulation class: H (IEC 85)
Discharge connection
Motor protection 3-6´´ hose, ISO-G or NPT
Phase sequence control, phase failure guard, temperature guard with
thermal contacts in the stator opening temperature 140°C (284°F) (= Materials
SMART system), air valve. Casted parts: Aluminium
- DOL, star/delta Outer casing: Stainless steel
- Softstarter (only 400V-50Hz) Motor shaft: Stainless steel
Impeller and suction cover: Hard-Iron™
Cable - SubCab Diffusers: Nitrile rubber
230V: 4G4mm², 20 m (66 ft) or 8AWG/4, 53 ft Screws and nuts: Stainless steel
380-575V: 4G4mm², 20 m (66 ft) or 12AWG/4, 53 ft O-rings: Nitrile rubber

Limitations Accessories
Max. submersion depth: 20 m (66 ft) External level regulator
Max. liquid temperature: 40 °C (104 °F) Zinc anodes
Allowed pH range: 5 - 8 Tandem connection
Maximum liquid density: 1100 kg/m³ (68 lbs/ft³) Pump raft
Specifications can be changed without notice

Grindex AB • P.O. Box 7025 • 174 07 Sundbyberg • Sweden • Ph: +46 8 606 6600 • Fax: +46 8 745 5328 • [email protected] • www.grindex.com

You might also like