FlowPro TM

High Performance Valve

DN 25 - 300, PN 63 - 160
Application Actuators Suitable for pneumatic or
electrical linear actuators

Control of neutral and aggressive ga- Bonnets

ses, vapours and liquids in industry
such as air, water, steam, gas oil, etc.

Flow in piping systems are controlled,

mixed, distri-buted or shut off using
a pneumatic SCHMIDT actuator, an
electric linear actuator, a SCHMIDT
thrust unit and electric rotary actuator
in conjunction with the valve. Standard Bonnet Extension Bonnet Bellows seal Bonnet

Due to its simple design and adapta-

billity to different plant systems, the
valve has a wide range of appli-cation. Tri

Product features
Body shape for optimum
flow characteristics Contoured
Plug
Disk
Plug
Perfo-
rated
Contou-
red Plug,
Perfo-
rated
Piston
Plug with
RLS
two-step
RLS
two-step
RLS
three-step
Mixing
Plug
Contoured
Plug
Plug top and Plug, contou- Series 1 Series 2 Series 2
bottom top and red seat Distributing
guided bottom Plug
• favourable flow dynamics when cor- guided
rectly selected
• solid top or top and bottom guided
plug

Long service life and ope-

Screwed Seats
rational reliability
• with aggressive or evaporating me-
dia due to sturdy design
• strong guides, thus minimal vibrati-
ons and wear
Bodies
Replaceable trim
• simple maintenance since the valve
body can remain in the piping when
trim is replaced
• seat screwed

Wide range of application

Three-Flange Body,
flanged
• up to 8 kvs values are available per
Four-Flange Body,
size flanged
• trims are partially exchangeable

Quality assurance system certifica-

ted acc. ISO 9001/EN 29001.

Covers

Cover Bottom Flange for Plugs

with top and bottom
guiding

Within the series following combinations of bodies,

trim, bonnets and actuators for each valve size are
possible:

2
 flowserve.com
FlowPro - High Performance Valve
TM

Suitable for linear thrust

units and electric rotary
actuators

100

Standard Bonnet, Extension Bonnet,

pressure-balanced pressure-balanced
Bonnet (heavy duty design)

Disk Perfo- Contou- Perfo- RLS RLS RLS Contoured Disk Perfo- Contou- Perfo- Piston RLS RLS RLS Mixing
Plug rated red Plug, rated two-step two-step three-step Plug Plug rated red Plug, rated Plug with two-step two-step three-step Plug
Plug top and Plug, Series 1 Series 2 Series 2 Plug top and Plug, contou- Series 1 Series 2 Series 2
bottom top and bottom top and red seat Distributing
guided bottom guided bottom Plug
guided guided

Four-Flange Body, Angle Body, Angle Body,

with Welded Ends flanged with Welded Ends

Bottom Seat Bottom Seat for

for Mixing Plug Distributing Plug
Bottom Flange with
control edge for RLS,
Series 2

HER
SC

Connection Piece for Three-Way Valve 99

R

3
Body with Flange Connection
Certificate Nominal Size DN
Body Material
without with 25 40 50 80 100 150 200 250 300
1.0619
1.4581 Material certificate Material certificate acc. to

Three- 1.4308 without EN 10 204 2.2

Flange EN 10 204 3.1
1.5419 Pressure/leakage certificate EN 10 204 3.2
1.6220 without Pressure/leakage cert. acc. to
1.7357 Schmidt minimal Valve Stan-
dards acc. to
EN 10 204 2.2
1.0619 EN 10 204 3.1
PED 97/23EC Cat. III EN 10 204 3.2
1.4581
Schmidt valves acc. to
Four- 1.4308
Flange 1.5419 AD - A4
TRB 801
1.6220 TRD 110
1.7357
Customer Standard
1.0619
PED 97/23EC Cat. IV
1.4581
Angle 1.4308
1.5419
1.6220
Three- 1.0619
Way 1.5419

Nominal Pressure Level, Form of Connection

Form of Connection Nominal Size DN
PN
Design PN 63 - 100 PN 63 - 160 25 40 50 80 100 150 200 250 300
Standard EN 1092-1, Form B2 DIN 2526, Form E 63
Recess EN 1092-1, Form F DIN 2526, Form R 100
Groove EN 1092-1, Form D DIN 2526, Form N 160*
Lense - DIN 2526, Form L *) not allowed by Three-Way Valves !

Body with Welded End Connection

Certificate Nominal Size DN
Body Material
without with 25 40 50 80 100 150 200 250 300
1.0619 Material resp. Pressure / Material resp. Pressure /
Four- leakage certificate leakage certificate acc. to
Flange 1.4581
Schmidt minimal Valve EN 10204 2.2, 3.1, 3.2
1.4308 Standards acc. to
Schmidt valves acc. to
1.5419 PED 97/23EC Kat. III
AD - A4, TRB 801,
1.7357 TRD 110, Customer
1.0619 Standard, PED
Angle 97/23EC Kat. IV
1.5419

Nominal Pressure Level, Form of Connection

Di- Nominal Size DN
Form of Connection PN men-
sion 25 40 50 80 100 150 200 250 300
ød 3 168,3 219,1 273,0 323,9
63 see PN 100
s 5,6 7,1 8,8 11,0
Standard Welded Ends based on ød 3 33,7 48,3 60,3 88,9 114,3 168,3 219,1 273,0 323,9
DIN 3239 Section 1, Table 1 100
( Special welded end dimensions available ) s 2,6 2,6 3,2 4,0 5,0 7,1 10,0 12,5 14,2
ød 3 33,7 48,3 60,3 88,9 114,3 168,3 219,1 273,0 323,9
160
s 3,2 3,6 4,0 6,3 8,0 12,5 16,0 20,0 22,2

4
 flowserve.com
FlowTop - High Performance Valve TM

Pressure-Temperature Ratings ( acc. to EN 1092-1 )

Body Material W.Nr.: 1.0619, GP 240 GH Body Material W.Nr.: 1.4581, GX 5CrNiMoNb 19-11-2
PN safe load operating pressure in bar at °C PN safe load operating pressure in bar at °C
(bar) -100 -60 -10 50 100 200 250 300 350 400 450 500 530 (bar) -100 -60 -10 50 100 200 250 300 350 400 450 500 530
63 63 63 58,8 47,6 44,8 40,6 37,8 36,4 63 47,3 63 63 54,0 46,0 43,0 41,0 38,0 36,0
100 100 100 93,3 75,6 71,1 64,4 60,0 57,8 100 75,0 100 100 86,0 83,0 69,0 65,0 61,0 57,0
160 160 160 149,3 124,4 113,8 103,1 96,0 92,4 160 120,0 160 160 138,0 117,0 110,0 104,0 97,0 91,0

Body Material W.Nr.: 1.5419, G 20 Mo 5 Body Material W.Nr.: 1.7357, G 17 CrMo 5-5
PN safe load operating pressure in bar at °C PN safe load operating pressure in bar at °C
(bar) -100 -60 -10 50 100 200 250 300 350 400 450 500 530 (bar) -100 -60 -10 50 100 200 250 300 350 400 450 500 530
63 63 63 63 60,2 56,0 47,6 44,8 42,0 40,6 63 63 63 63 63 61,6 57,4 53,2 50,4 47,6 38,4 21,8
100 100 100 100 95,6 88,9 75,6 71,1 66,7 64,4 100 100 100 100 100 97,8 91,1 84,4 80,0 75,6 60,9 34,7
160 160 160 160 135,0 126,0 117,0 110,0 107,0 103,0 160 160 160 160 160 156,0 146,0 135,0 128,0 121,0 97,0 56,0

Body Material W.Nr.: 1.6220, G 20 Mn 5 Body Material W.Nr.: 1.4308, GX 5 CrNi 19-10
PN safe load operating pressure in bar at °C PN safe load operating pressure in bar at °C
(bar) -200 -100 -60 -10 50 100 200 250 300 350 400 450 500 (bar) -200 -100 -60 -10 50 100 200 250 300 350 400 450 500
63 47,3 63 63 42,0 37,8 36,8 35,7 63 63 63 63 63 49,0 43,4 35,6 33,0 30,8
100 75,0 100 100 66,7 60,0 58,3 56,7 100 100 100 100 100 77,8 68,9 56,4 52,4 48,9
160 120,0 160 160 106,7 96,0 93,3 90,7 160 160 160 160 160 128,0 114,0 89,0 84,0 78,0

Bonnet 1) pressure balancing not possible by three-way valves, Silentpack, MultiStream, Disk Plug and Disk Plug with Contoured Seat !

-Bonnet
Standard- Bellows seal- HT Extension- LT Extension- Insulating- Heavy duty-
Use: Use: Use: Use: Use: Use:
Nominal general toxic, smell strong, in case of possible for reducing the for reducing the by rotary electric
Pressure Balancing Body Material Size fleeting, costly me- overhating of pack- danger of icing of danger of icing of actuators and linear
dia or vacuum ing and/or linear ac- the packing box the packing box thrust units
tuator
-10 °C to +250 °C -60 °C to +400 °C >250 °C to +450 °C -60 °C to +250 °C -200 °C to +250 °C -10 °C to +530 °C

Unbalanced, 1.0619
shaft guided
1.4581
25
1.5419
to
1.7357
300
1.6220
1.4308
V-Ring balanced 1), 1.0619
suitable for 80
Trim Material 1.4571 1.4581
to
-60 °C up to +250 °C 1.5419
300
1.6220
Piston-Ring balanced 1), 1.0619 50
s. f. Trim Material 1.4122 to
+250 °C up to +450 °C 1.5419 300

Packing Box
-Bonnet
Type of Packing
Standard- Bellows seal- HT Extension- LT Extension- Insulating- Heavy duty-
standard

PTFE-Rings - 200 °C up to 250 °C, general use, BAM

Pure Grafite-Rings - 180 °C up to 530 °C, general use, BAM

PTFE-Rings - 200 °C up to 250 °C, general use, BAM

Pure Grafite-Rings
loaded

- 180 °C up to 400 °C, general use, BAM

PTFE-Rings - 200 °C up to 250 °C, “TA-Luft”

Pure Grafite-Rings - 180 °C up to 400 °C, “TA-Luft”

Plug
Design Guide of Plug Flow
Plug Type Characteristic Top guided Top and bot-
tom guided Flow Action Flow Action
Seat 4 - 250 tends to tends to
(only Four-Flange)
standard partial full hardened tenifer open valve close valve
stellited stellited treated Seat 34 - 250

Parabolic Plug equal percentage

general use linear
Disk Plug on / off
Perforated Plug equal percentage
in case of cavitation, high differential pressure
by gases, vapours, for reducing nois ≤ 15 dB(A) linear
Piston Plug with Contoured Seat
equal percentage
in case of cavitation, steaming

RLS -Units equal percentage

for reducing noise ≤ 20 dB(A) linear
Mixing Plug general use linear
Distributing Plug general use linear

5
Parabolic Plug
Characteristic: modified-equal percentage

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122 1.4922
Size Plug (mm)
(m3/h)
stan- partial full soft stan- harde- stan-
dard stellited stellited seated dard ned dard 25 40 50 80 100 150 200 250 300
0,16 4 1
0,25 4 1
0,40 4 1
0,63 6 1
1,6 8 1
2,5 10 1
20
4,0 12 1
6,3 16 1
10 20 1
16 25 1
25 34 1/2*
40 42 1/2
40 42 1/2
63 53 1/2
40
100 67 1/2
160 84 1/2
160 84 1/2
200 100 1/2
355 125 1/2
80
450 150 1/2
710 200 1/2
1000 250 1/2

Parabolic Plug
Characteristic: linear

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122 1.4922
(m3/h) Size
Plug (mm) stan- partial full soft stan- harde- stan-
dard stellited stellited seated dard ned dard 25 40 50 80 100 150 200 250 300
4,0 12 1
6,3 16 1
10 20 1
20
16 25 1
25 34 1/2*
40 42 1/2
40 42 1/2
63 53 1/2
40
100 67 1/2
160 84 1/2
160 84 1/2
200 100 1/2
355 125 1/2
80
450 150 1/2
710 200 1/2
1000 250 1/2

* 1 Top guided
2 Top and bottom guided with four-flange body only

6
 flowserve.com
FlowPro TM
- High Performance Valve

Perforated Plug
Characteristic: equal percentage

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122 1.4922
(m3/h) Size Plug (mm)
tenifer stan- harde- stan- harde-
treated dard ned dard ned 25 40 50 80 100 150 200 250 300
2,5 20 1
4,0 20 1
6,3 20 1
20
10 25 1
20 34 1
25 42 1
28 42 1
50 53 1/2
40
71 67 1/2
100 84 1/2
160 84 1/2
200 100 1/2
280 125 1/2
80
400 150 1/2
500 200 1/2
710 250 1/2

Perforated Plug
Characteristic: linear

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122 1.4922
(m /h)
3
Size Plug (mm)
tenifer stan- harde- stan- harde-
treated dard ned dard ned 25 40 50 80 100 150 200 250 300
2,5 20 1
4,0 20 1
6,3 20 1
20
10 25 1
20 34 1
25 42 1
28 42 1
50 53 1/2
40
90 67 1/2
125 84 1/2
160 84 1/2
200 100 1/2
315 125 1/2
80
500 150 1/2
630 200 1/2
900 250 1/2

7
Disk Plug
Characteristic: on / off

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122 1.4922
(m3/h) Size Plug (mm)
standard standard standard 25 40 50 80 100 150 200 250 300
10 20 1
25 34 1 20
40 42 1
100 67 1
40
160 84 1
400 125 1
500 150 1
80
1000 200 1
1400 250 1

Piston Plug with Contoured Seat

Characteristic: equal percentage

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122
(m3/h) Size Plug (mm)
full stellited hardened 25 40 50 80 100 150 200 250 300
2,5 16 1
6,3 20 1
10 25 1 20
16 34 1
25 42 1
40 53 1
63 67 1 40
100 84 1
160 100 1
200 125 1 80
355 150 1

Mixing, Distributing Plug

Characteristic: linear

Material / Design
Kvs Port Guide Stroke Incorporable seat diameter depends on nominal size DN
of 1.4571 1.4122
(m /h)
3
Size Plug (mm)
tenifer
treated standard hardened 40 50 80 100 150 200
25 34 2
20
40 42 2
100 67 2
40
160 84 2
355 125 2
80
450 150 2

8
 flowserve.com
FlowPro TM
- High Performance Valve

Single Seat Valve suitable for

Linear Actuators

3.6

3.4 Designation Part Material

3.3 Body 1.1 1.0619 1.5419 1.7357 1.4581

1.4
Bonnet Gasket 1.2 Pure Graphite on Support Plate from 1.4571
Stud Bolt 1.3 G GA V
3.2
Hex Nut 1.4 G GA V
1.5 Extension Sleeve 1.5 G GA V
Screwed Seat 2.1 1.4571/1.4122 1.4922 1.4571
3.5
Contoured Plug 2.2 1.4571/1.4122 1.4922 1.4571
3.1 Spring Pin 2.3 A2
Stem 2.4 1.4571 1.4922 1.4571
Profil Ring 2.5 Pure Grafite
Bonnet 3.1 1.0460 1.5415 1.7335 1.4571
1.2 Bottom Ring 3.2 1.4571
Packing Box 3.3 PTFE-Rings or Pure Grafite Rings
Gland Flange 3.4 1.0460 1.5415 1.4571
2.4 Stud Bolt 3.5 A 2 - 70
Hex Nut 3.6 A 2 - 70
Insert 4.1 1.0460 1.5415 1.7335 1.4571

2.3 Special Materials on request !

2.2

2.1

2.5

1.3

1.1

1.3

1.2

4.1

1.5

1.4

Single Seat Valve with Standard Bonnet, Contoured Plug with

Top and Bottom Guiding (Symbolic Drawing DN 100, PN 160)

9
Single Seat Valve suitable for linear
Thrust Units and electrical rotary Actuators
5.10 + 5.11

5.9

5.7

5.8
Designation Part Materials
3.6
Body 1.1 1.0619 1.5419 1.7357 1.4581
3.4
Bonnet Gasket 1.2 Pure Graphite on Support Plate from 1.4571
3.3 Stud Bolt 1.3 G GA V
Hex Nut 1.4 G GA V
3.2 5.2
Extension Sleeve 1.5 G GA V
5.3 Screwed Seat 2.1 1.4122 1.4122 1.4922 1.4571
5.1 5.5 + 5.6 Contoured Plug 2.2 1.4122 1.4122 1.4922 1.4571
100

Spring Pin 2.3 A2

3.5 0 5.4
Stem 2.4 1.4122 1.4122 1.4922 1.4571
1.4 Profil Ring 2.5 Pure Graphite
Bonnet 3.1 1.0460 1.5415 1.7335 1.4571
1.5
Bottom Ring 3.2 1.4122 1.4122 1.4922 1.4571
3.1 Packing Box 3.3 Pure Graphite Rings
Gland Flange 3.4 1.0460 1.5415 1.4571
Stud Bolt 3.5 A 2 - 70
Hex Nut 3.6 A 2 - 70
1.2 Insert 4.1 1.0460 1.5415 1.7335 1.4571
Yoke Rod 5.1 1.4021
Flange 5.2 1.0038
2.4 Hex Nut 5.3 8
Stroke indicator Scale 5.4 Aluminium
Hex Bolt 5.5 A 2 - 70
Washer 5.6 A2
2.3 Hex Nut 5.7 8
Hex Nut 5.8 04
2.2
Stroke indicator Disk 5.9 1.0114
Threaded Ring 5.10 1.1141
2.1 Set Screw 5.11 45 H

2.5
Special Materials on request !

1.3

1.1

1.3

1.2

4.1

1.5 Single Seat Valve with Standard Bonnet (heavy-duty),

Contoured Plug with Top and Bottom Guiding
(Symbolic Drawing DN 100, PN 160
1.4

10
 flowserve.com
FlowPro TM
- High Performance Valve

Valve with Three-Flange Body Valve with Four-Flange Body

≈H 5
≈H 3
≈H 2
≈H 1

≈H 1

DN 100 DN 100
PN 160 PN 160 DN 100 DN 100 DN 100
PN 160 PN 160 PN 160
≈h

BL

Valve with BL Valve with Valve with Valve with

Standard Bonnet Extension Bonnet Bellows seal Bonnet Insulating Bonnet
Valve with
Standard Bonnet

Nominal Size DN
Designations
25 40 50 80 100 150 200 250 300
Stroke 20 40 80
BL Face to Face Dimensions 230 260 300 380 430 550 650 775 900
≈h 120 135 165 195 240 315 405 480 535
≈ H1 Standard Bonnet 160 195 215 220 255 330 410 485 535
≈ H2 Extension Bonnet 160 195 215 390 425 505 580 655 705
≈ H3 Bellows seal Bonnet 325 360 360 550 550 905 905 905 905
≈ H5 Insulating Bonnet 650 650 650 650 650 670 800 800 800
≈ Weight in kg Standard Bonnet 19,5 30 44 84 133
Three-Flange Body
Extension Bonnet 19,5 30 44 86 136
Bellows seal Bonnet 26,0 38 50 98 144
Insulating Bonnet 26,0 38 50 98 144
≈ Weight in kg Standard Bonnet 23,5 34 48 91 161 320 600 981 1333
Four-Flange Body
Extension Bonnet 23,5 34 48 93 164 323 603 984 1336
Bellows seal Bonnet 30,0 42 55 105 172 340 620 1001 1353
Insulating Bonnet 30,0 42 55 105 172 340 620 1001 1353
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L
Welded Ends comply with DIN 3239 Section 1, Table 1

Valve with Three-Flange Body Valve with Four-Flange Body

100 100

0 0
≈H

≈H

DN 100 DN 100
PN 160 PN 160
≈h

BL

Valve with BL
Standard Bonnet
Valve with
Standard Bonnet

Nominal Size DN
Designations
25 40 50 80 100 150 200 250 300
Stroke 20 40 80
BL Face to Face Dimensions 230 260 300 380 430 550 650 775 900
≈h 120 135 165 195 240 315 405 480 535
≈H Standard Bonnet (heavy duty) 332 371 388 560 510 813 895 925 980
≈ Weight in kg - Three-Flange Body 30 40 54 105 169
≈ Weight in kg - Four-Flange Body 34 44 59 112 197 405 688 1077 1432
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L
Welded Ends comply with DIN 3239 Section 1, Table1

11
 Valve with Angle Body

≈H 4
≈H 3
≈H 2
≈H 1

DN 100 DN 100 DN 100 DN 100

PN 160 PN 160 PN 160 PN 160
E

Valve with Valve with Valve with Valve with

Standard Bonnet Extension Bonnet Bellows seal Bonnet Insulating Bonnet

Nominal Size DN
Designations
25 40 50 80 100 150 200
Stroke 20 40 80
E Angle Dimension 115 130 150 190 215 275 325
≈H1 Standard Bonnet 140 165 180 180 200 250 300
≈H2 Extension Bonnet 140 165 180 350 370 420 470
≈H3 Bellows seal Bonnet 305 340 340 510 510 820 820
≈H3 Insulating Bonnet 630 630 630 630 630 630 690
≈ Weight in kg Standard Bonnet 15 27 38 65 92 215 375
Extension Bonnet 15 27 38 67 95 218 378
Bellows seal Bonnet 22 34 43 79 103 235 380
Insulating Bonnet 22 34 43 79 103 235 380
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L
Welded Ends comply with DIN 3239 Section 1, Table 1

Valve with Angle Body

100

0
≈H

DN 100
PN 160
E

Valve with
Standard Bonnet

Nominal Size DN
Designations
25 40 50 80 100 150 200
Stroke 20 40 80
E Angle Dimension 115 130 150 190 215 275 325
≈H Standard Bonnet (heavy duty) 311 342 353 519 455 430 785
≈ Weight in kg 26 36 47 86 128 300 463
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L
Welded Ends comply with DIN 3239 Section 1, Table 1

12
 flowserve.com
FlowPro TM
- High Performance Valve

Three-Way Valve

≈H 5
≈H 3
≈H 2
≈H 1

DN 100 DN 100 DN 100 DN 100

PN 100 PN 100 PN 100 PN 100
≈h

BL

Valve with Valve with Valve with Valve with

Standard Bonnet Extension Bonnet Bellows seal Bonnet Insulating Bonnet

Nominal Size DN
Designations
40 50 80 100 150 200
Stroke 20 40 80
BL Face to Face Dimensions 260 300 380 430 550 650
≈h 240 250 310 350 450 550
≈ H1 Standard Bonnet 195 215 220 255 330 410
≈ H2 Extension Bonnet 195 215 390 425 505 580
≈ H3 Bellows seal Bonnet 360 360 550 550 905 905
≈ H5 Insulating Bonnet 650 650 650 650 670 800
≈ Weight in kg Standard Bonnet 40 56 105 176 348 654
Extension Bonnet 40 56 105 178 351 656
Bellows seal Bonnet 48 64 118 193 385 674
Insulating Bonnet 48 64 118 193 385 674
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L

Three-Way Valve

100

0
≈H

DN 100
PN 100
≈h

BL

Valve with
Standard Bonnet

Nominal Size DN
Designations
40 50 80 100 150 200
Stroke 20 40 80
BL Face to Face Dimensions 260 300 380 430 550 650
≈h 240 250 310 350 450 550
≈H Standard Bonnet (heavy duty) 371 388 560 510 813 895
≈ Weight in kg 50 67 126 212 433 742
Flanges Drilled and Dimensioned acc. to EN 1092-1, Form B2, Form F, Form D resp. DIN 2501, Form E, R, N, L

13
 Pneumatic linear Actuator
with NAMUR-Yoke

øA

≈H PD 252 - PD 700
Designation Area 250 500 700
Stroke 20 mm 20 mm 40 mm 20 mm 40 mm
øA mm 265 352 352 405 405
≈H mm 330 420 450 545 545
≈ Weight kg 16 31 40 46 46

øA
≈H PD 3002

≈H PD 1502

Designation Area 1500 3000

Stroke 20 / 40 / 80 mm 40 / 80 mm
øA mm 548 548
≈H mm 800 1140
≈ Weight kg 124 240

14
 flowserve.com
FlowPro TM
- High Performance Valve

Haselhofer - Electric linear Actuator øA

≈H
Designation Actuator ED 1,2 ED 4,5 ED 8 ED 12 ED 20 ED 25
Stroke 20 mm 20/40 mm 20 / 40 / 80 mm 80 mm
øA mm 145 145 184 184 216 216
≈H mm 505 535 570 570 660 660
≈ Weight kg 6,5 7,5 13 13 19 19

Linear thrust Unit “light” øA

Designation Thrust Unit LD 12 LD 16 LD 20 ≈H

Stroke 20 mm 40 mm 80 mm
øA mm 196 196 196
≈H mm 240 320 407
≈ Weight kg 12 17 20

Manual Operation øA
≈H

Designation Manual Operation HD 12 HD 16 HD 20

Stroke 20 mm 40 mm 80 mm
øA mm 300 300 400
≈H mm 400 450 480
≈ Weight kg 17 17 18

Linear thrust Unit “heavy” øA

≈H

Designation Thrust Unit SD 15 SD 35 SD 36 SD 75 SD120 SD200 SD300

Stroke 20 / 40 mm 80 mm
øA mm 125 125 175 175 175 210 300
≈H mm 165 165 290 280 280 335 410
≈ Weight kg 7,5 7,5 25 22 22 46 93

15
SPM - Code Typ
V724 DEVNA
DN
50
PN
160
Body/Cert.
1.0619/OOAO
Plug
PONP1GG
Seat kvs
42 40
Trim
1.4571
Actuator

Body Form 1.4571 Plug, Seat Material

1.4122
Three-Flange D 1.4922
Four-Flange V
Angle E
Three-Way W
kvs - Value 0,16 - 1600

Form of Connection
Port Size 4 - 250
Flange acc. to Form B2 M
EN 1092-1 Form D Q
Form F Y Flow tends top open Valve G
Flow tends to close Valve I
Flange acc. to Form E E
DIN 2526 Form N N
Form R R Characteristic
Form L L
modified - equal percentage G
Welded Ends acc. to linear L
DIN 3239 S on / off A
modified - equal percentage H
Bonnet Form with Special Rangeability

without Pressure Balancing V

with V-Ring Balancing O Plug Guidance
with Piston-Ring Balancing K
heavy duty S Top 1
Top and Bottom 2

Bonnet Assembly
Seat Leakage
Standard Bonnet N
Bellows seal Bonnet F IEC Class III O
HT-Extension Bonnet R Class IV P
LT-Extension Bonnet K Class IV - S1 Q
Insulating Bonnet I Class IV - S2 R
Class V S
Class VI T

Packing Box Assembly EN 12 266 LR A (DIN 3230 BN) A

LR A (DIN 3230 BO) B
Teflon-Rings, adjustable, BAM A
Graphite-Rings, adjustable, BAM B
Teflon-Rings, loaded, BAM N Plug Form
Graphite-Rings, loaded, BAM O
Teflon with Graphite, loaded, "TA" Q standard N
Graphite-Rings, loaded, "TA" V partial stellited D
contour stellited K
soft seated W
hardened H
Nominal Size 25 - 300 nitrided T

Nominal Pressure PN 63 63 Plug

PN 100 100
PN 160 160 Cont. Plug without Silent-Set P O
with Silentpack PK
with MultiStream Type C P C
with MultiStream Type D P D
Body Material 1.0619 with MultiStream Type E P E
1.4581 with MultiStream Type F P F
1.5419 with MultiStream Type G P G
1.7357 with MultiStream Type H P H
1.6220 with MultiStream Type I P I
1.7357 with MultiStream Type Q P Q
with MultiStream Type W PW
Disk Plug TO
Multi-Hole Plug LO
Materials acc. to international RLS-Unit, 2-step, Series I AO
Standards for Pressure Stressed Parts RLS-Unit, 2-step, Series II BO
RLS-Unit, 3-step, Series II DO
Standards for Materials Seat characteristic SO
without DGRL (Standard) O . . . Mixing Plug MO
TRD AG 1 H . . . Distributing Plug VO
AG 2 I . . .
TRB 801 AG A P . . .
AG B R . . . Standards and Certificates for final
AG C1 U . . . test
AG C2 T . . .
Standards for final test
Certificates for Materials
without EN 1349 (Standard) . . A .
without . O . . DGRL Kat. IV . .M.
EN 10 204 2.2 . Z . .
3.1 (Survay of Cert.) . B . . Certificates for final test
3.1 (CMTR) . D . .
3.2 . A . . without . . . O
EN 10 204 2.2 . . . Z
3.1 . . . B
3.2 . . . A

16
 flowserve.com
FlowPro TM
- High Performance Valve

PD 252 ADYOZ Operation on air failure ED 8/8 ZPO 50 Positioning Speed LD 16 Linear thrust Unit “light”

A Stem retracted 13,5 13,5 mm/min Thrust Stroke Torque ISO5210

Z Stem extracted 17 17 mm/min LD 12 10,4 kN 20 mm 30 Nm F10
25 25 mm/min LD 16 17,3 kN ≤40 mm 50 Nm F10
50 50 mm/min LD 20 27,7 kN ≤80 mm 80 Nm F10

Hand Wheel

O without Positioning Electronics

L top, light-weight-variant SD 15 Linear thrust Unit “heavy”
PD 252 + 502 O without (only SN-bonnet)
H top, heavy-duty-variant M Positioning Electronics,
PD 252 - 700 input in mA Thrust Stroke Torque DIN3210
S lateral PD 1502 - 3002 V Positioning Electronics, SD 15 15 kN ≤40 mm 30 Nm G0
input in V SD 35 35 kN ≤40 mm 100 Nm G0
SD 36 35 kN ≤80 mm 100 Nm G0
SD 75 77 kN ≤80 mm 250 Nm G1/2
Spring Range SD 120 121 kN ≤80 mm 500 Nm G1/2
Positioning Feedback SD 200 181 kN ≤80 mm 1000 Nm G3
Actuator Size Stroke
AD 0,2 - 1,0 PD 252 - 502 20 SD 300 288 kN ≤80 mm 1700 Nm G3
O without SD 300
AD 0,2 - 1,0 PD 502 - 3002 40
P 1000 Ohm potentiometerΩ
288 kN ≤80 mm 1700 Nm G4
AD 0,2 - 1,0 PD 1502 - 3002 80
M 4 - 20 mA positioning
GF 0,4 - 2,0 PD 1502 - 3002 40, 80
feedback
BL 0,5 - 1,9 PD 252 - 502 20
BL 0,5 - 1,9 PD 502 - 700 40
KI 0,75 - 1,4 PD 1502 - 3002 40, 80 HD 16 Manual Operation
MU 0,8 - 1,6 PD 1502 20 Mains Power
DY 1,0 - 2,4 PD 252 - 502 20 Thrust Stroke
DY 1,0 - 2,4 PD 502 - 700, 3002 40 Z alternating current HD 12 13 kN 20 mm
DY 1,0 - 2,4 PD 3002 80 230 V, 50 Hz HD 16 23 kN 40 mm
EP 1,3 - 2,1 PD 3002 40, 80 D alternating current HD 20 30 kN 80 mm
VI 1,5 - 2,1 PD 1502 20 400 V, 50 Hz
VC 1,5 - 2,7 PD 252 - 700 20 G direct current
VC 1,5 - 2,7 PD 502 - 1502 40 24 V
VC 1,5 - 2,7 PD 1502 80
VI 1,5 - 3,8 PD 252 - 502 20
VI 1,5 - 3,8 PD 502 - 700 40
JC 1,8 - 2,7 PD 700 20 Haselhofer - Electric linear
FY 2,0 - 3,5 PD 1502 40, 80 Actuator
FY 2,0 - 4,8 PD 252 - 502 20
FY 2,0 - 4,8 PD 502 - 700 40 ED 1,2/1,2 Actuating Power 1,2 kN
AJ 2,6 - 4,2 PD 1502 40, 80 ED 4,5/2 Actuating Power 2 kN
ED 4,5/4,5 Actuating Power 4,5 kN
ED 8/6 Actuating Power 6 kN
ED 8/8 Actuating Power 8 kN
Actuator Color ED 12/12 Actuating Power 12 kN
ED 20/15 Actuating Power 15 kN
A blue ED 20/20 Actuating Power 20 kN
B white ED 25/25 Actuating Power 25 kN
C yellow

Actuator Size with NAMUR-Yoke

Actuator Size Stroke
PD 252 250 cm2 20
PD 502 500 cm2 20, 40
PD 700 700 cm2 20, 40
PD 1502 1500 cm2 20, 40, 80
PD 3002 3000 cm2 40, 80

17
18
 flowserve.com
FlowPro TM
- High Performance Valve

19
 Flowserve (Austria) GmbH
Control Valves - Villach Operation

Kasernengasse 6
9500 Villach
Austria

Tel.: +43 (0) 4242 41181-0

Fax.: +43 (0) 4242 41181-50

[email protected]

www.flowserve.com
www.flowserve-villach.com

SAEEBRV724-01 01.10

Your contact:

TM
indicates a trade mark of Flowserve.
Infomation given in this product specification sheet is made in good faith and based upon specific testing but does not, however, constitute a guarantee.
Modifications without notice in line with technical progress.
PSS 108292 05/07 V724 en