Scribd
Upload
373 views1 page

Thread Specification ORFS SAE J1453

The document provides technical specifications for ORFS (O-Ring Face Seal) fittings per SAE J1453 and ISO 8434-3 standards. The ORFS system consists of an ORFS Male fitting with an O-ring that seals against a flat-seated ORFS Female swivel nut fitting. The swivel nut can slide back to aid installation in tight spaces. The prominent O-ring position on the male fitting allows for easy inspection of the O-ring condition.

Uploaded by

Kiran Kadam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
373 views1 page

Thread Specification ORFS SAE J1453

The document provides technical specifications for ORFS (O-Ring Face Seal) fittings per SAE J1453 and ISO 8434-3 standards. The ORFS system consists of an ORFS Male fitting with an O-ring that seals against a flat-seated ORFS Female swivel nut fitting. The swivel nut can slide back to aid installation in tight spaces. The prominent O-ring position on the male fitting allows for easy inspection of the O-ring condition.

Uploaded by

Kiran Kadam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA

10.49 Thread Specification - ORFS (SAE J1453)


SAE J1453, ISO 8434-3
ORFS is O RING FACE SEAL

ORFS system consists of ORFS Male with O Ring in Face, which ORFS MALE ORFS FEMALE
seals against Flat Seated ORFS Female Swivel Nut fitting.

The Swivel Nut can be slipped back to help installation in tight


situations.

The prominent position of the O Ring on the Male fitting makes


it easy to inspect the condition of the O Ring.

MALE THREAD MALE FEMALE TUBE


O.D. & PITCH DASH THREAD O.D. THREAD I.D. SIZE
SIZE
inch - TPI mm inch mm inch mm
9/16 - 18 UNF -09 14.3 0.56 12.9 0.51 1/4
11/16 - 16 UN -11 17.3 0.68 16.0 0.63 3/8
13/16 - 16 UN -13 20.6 0.81 19.1 0.75 1/2
1 - 14 UNS -16 25.4 1.00 23.6 0.73 5/8
1.3/16 - 12 UN -19 30.0 1.18 28.2 1.11 3/4
1.7/16 - 12 UN -23 36.3 1.43 34.3 1.35 1
1.11/16 - 12 UN -27 42.7 1.68 40.6 1.60 1.1/4
2 - 12 UN -32 51.8 2.00 48.8 1.92 1.1/2
1 2 3 4 5 6 7 8 9 10
TECHNICAL DATA

355 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com

You might also like