Starting Application Software: User' S Manual 92015 Communication Package For Digital Multimeters
Starting Application Software: User' S Manual 92015 Communication Package For Digital Multimeters
IM92015-02E
3rd Edition: Oct.2017 (KYOU)
General Specifications
● Infrared Communication Adapter
How to Use the Product
External dimensions : 65(W)×40.6(H)×22.5(D) ● Connecting to Personal Computer
Cable length : Approx 2m Connect the communication to a USB Port of the personal computer.
Weight : Approx 80g ● Setting Communication Port
Specification of USB : Ver.1.1 (Reference)
Set the communication port to which the product is connected.
● Communication Application Software
Select Settings and then Communication Port. Specify the communication port
・System Requirements
number of the personal computer used. Refer to "3-1 COM Port Number" and "3-2
Operating system : Windows 7/8/10(32/64bit)
Changing the COM Port Number" in the supplied Installation Instructions for the port
Memory : At least 64 MB
number.
Storage device : Hard disk with at least 10 MB of free space and one
● Receiving Data
CD drive
Microsoft Excel : Excel2003 or later Turn on the DMM to receive real-time data, logging-mode data and save-mode data.
・Main Specifications for Communication Application Software These data can be received by clicking the respective toolbar buttons shown above.
Data receiver : Can receive save-mode and logging-mode memory Do not select the PRINT function of the DMM during a data receiving.
data, and real-time data from a DMM. (Maximum
receive real-time data: 32767)
Data processor : Can display digital data and trend graphs, saved and
read data, and transfer data to Excel.
Windows and Excel are registered trade marks of Microsoft in the United States.
For Models:TY720,TY710,TY530,CA450(*)
(*):When using CA450, functions of“Receives DMM save mode data”and“Receives
DMM logging mode data”are not valid.
For more information on Communication of CA450, see Section 6. Communication of
User's Manual (IM CA450-EN).
Specify a file type from New or Custom in the dialog box that appears:
Photo Sensor New file : You can arbitrarily choose a file name when saving from Excel.
KNOB 22.5
Custom file : Adds a new spreadsheet to an existing file.
2000±50
You can also specify a graph title. Enter any title in the box shown in the dialog box
and check the respective check boxes to store the existing custom file name and the
title to memory until you restart DMM Application and transfer data to Excel.
● DMM Monitor
The DMM measured values can be regularly displayed on a
personal computer screen. The Monitor screen is displayed by
clicking the button for starting data reception.
Communication Settings ● Request to Send Logging-mode Data Count
RN command
The communication settings for the TY700 and TY500 series of digital multimeters are fixed
as follows: Description Used to acquire the count of data in DMM logging-mode memory.
Baud rate : 9600 bps
Command RN<CrLf>
Parity : None
Stop bit : 2 bits Return RN, nnnnnx<CrLf>
Data length : 8 bits nnn : logging-mode data count (000 to 600) (734)
Handshake : None nnnnn : logging-mode data count (00000 to 01000) (TY710)
Delimiter : <CrLf> fixed nnnnn : logging-mode data count (00000 to 10000) (TY720)
nnnn : logging-mode data count (0000 to 1600) (TY530)
x : Checksum
Command References
● Request to Send Real-time Data
● Request to Send Interval of Logging-mode Data
RR command
RI command
Description Used to acquire current measured value. The data can be
Description Used to acquire the measurement interval of data in DMM logging-
consecutively acquired with a parameter following the command.
mode memory.
Command ・Single data acquisition : RR,1<CrLf>
Command RI<CrLf>
・Consecutive data acquisition : RR,2<CrLf>
・Consecutive acquisition stop : RR,0<CrLf> Return RI, nnnnx<CrLf>
nnnn : interval of logging-mode data (0001 to 1800)
Retum ・Single and consecutive data acquisition
x : Checksum
RR, S, MDDDDDDAUFFx<CrLf>
S : Status→ N=Normal O=Over B=LowBatt
M : Sign“−”or“+”
DDDDDD : measured value
A : auxiliary unit (k, m, etc.)
U : unit (V, A, etc.)
FF : measurement function (DC, AC, etc.)
x : Checksum
Example)
DC432.10mV → RR, N, +432.10mVDC7<CrLf>
Description Used to acquire the data from DMM save-mode memory. The
number of memory data can be specified with a parameter
following the command.
● After-sales Servicing
Should the product fail during operation or be not able to operate normally any
more, and thus need to be repaired, contact the sales representative from which you
purchased it.