PT240 Hoja de Especificaciones

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PT240 PNEUMATIC TIRE ROLLER

TIER III CERTIFIED

ENGINE TRAVEL STANDARD equipment


Make Cummins QSB 3.3 - C99 Drive Powershift Fixed ROPS Open Platform with hand rails
Type Tier III certified Speeds 3 speed powershift Anti-vandal cover
Turbocharged / Charge-air cooled Halogen worklights x 4 (55 watt / front and rear)
Maximum speed 12 mph (19 km/hr)
Rated horsepower 99 hp (74 kW) Turn signal indicator (left and right)
Oscillation +/- (front axle) 5°
@ 2200 RPM Breaklights
Independent front axles 2 Tilt open hood
ELECTRICAL Gradeability % 25% Powershift Transmission (3-speed)
Backup alarm
Voltage 12 volts
Brakes Retractable seat belt - 2 in (51 mm)
Batteries 1 Dual operator stations
Service brake Hydro-pneumatic disc
Amp hour 100 Suspension seats with foldable arm rests
Parking Disc Pressurized water system
Cold cranking amps 640
Emergency Disc Water filtration - single stage
Emergency stop button
STEERING
Tires Master disconnect switch
Steering type Hydrostatic Horn
Tires (smooth) 4 + 4 - 11.0 x 20 18PR
Axles 2 x independent axles Hourmeter
Tire overlap 2 in
Front axle Isostatic w/ 2-pivot points Lift and tie down provision - 4-point
Tire inflation system Central (AOR*) Watering system drains
Rear axle Driven 2 tire pairs *(AOR) Air-on-the-run
w/ Diff. lock as option Electric fuse protection
Steering angle (+/-) 32° Steering wheel spinner knob
CAPACITIES
Spin-on fuel, engine oil and hydraulic filters
Oscillation angle +/- (front axle) 5°
Fuel tank 66 gal (250 L) Tool box
Inside turning radius (l/r) (243/239 in) Indicator lights
(6180/6065 mm) Engine oil 1.85 gal (7 L)
Battery
Outside turning radius (l/r) (392/344 in) Hydraulic reservoir 5.81 gal (22 L) Engine oil pressure
(9960/8735 mm) Intake preheater
Engine temperature
OPERATING WEIGHTS Parking brake
operator’s & CAPACITIES Sprinkler system ON/OFF
compartment Operating weight 20,525 lbs (9310 kg) Multi-function display
Operator work stations 2 w/ cab option (add) 617 lbs (280 kg) Engine RPM
Engine hours
Seats (vinyl/suspension) 2 Maximum operating weight 52,910 lbs Fuel rate
(24 000 kg) System voltage
Seatbelt (retractable) 2 in (51mm)
Maximum ballast 32,386 lbs % engine load at current RPM
Rearview mirrors 2 (side mounted) (14 690 kg) Coolant temperature
Oil pressure
One wheel load minimum 2,566 lbs Fuel economy
PRESSURIZED (1164 kg) Current fuel consumption
WATERING SYSTEM
One wheel load maximum 6,614 lbs Brush scrapers on each tire
Water tank 122 gal (460 L) (3000 kg)
Tank type Polyethylene Compaction width (max.) 78.2 in
(1986 mm) Optional Equipment
Watering pumps 1
Cab w/ heat
Water filtration stages 1 Cab air-conditioning
Radio mounting w/ 2 speakers and antenna
Cocoa mat scrapers
Thermal aprons
Scrap metal for ballast
Rotating beacon
Engine prefilter
Chock blocks
Spare tire with rim
Radial tires
Water tight chassis ballast compartment
Edge cutter
Page 1 of 2
E D

A
F

B G

DIMENSIONS
A. Wheelbase 149.6 in (3800 mm)
B. Overall length 197.6 in (5020 mm)
C. Overall length w/ thermal aprons 227.6 in (5780 mm)
D. Overall height 122.4 in (3110 mm)
E. Seat height 96.5 in (2450 mm)
F. Compaction width 78.2 in (1986 mm)
G. Overall width of fixed parts 82.7 in (2100 mm)
G. Overall width of fixed parts w/ thermal aprons 90.9 in (2310 mm)
H. Ground clearance 13.4 in (340 mm)
H*. Ground clearance w/ ballast boxes under machine 10.2 in (260 mm)

NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications
without notice and without incurring any obligation relating to such change. Case Construction
Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods
and/or services of companies other than CNH America LLC, are the property of those respective companies.
www.casece.com

Form No. CCE201102PT240 Printed in U.S.A. © 2011 CNH America LLC


PT240 • Page 2 of 2 All Rights Reserved

All Case construction equipment is biodiesel ready.

You might also like