Cetamine f3100 en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Cetamine® F3100

An organic product for the protecting of cold and hot water closed systems, which do not
contain aluminium

APPLICATION Protection against copper corrosion occurs due


Cetamine® F3100 is an organic product for the to the copper inhibitor existing in the product.
protecting of cold and hot water closed systems, Neutral amines and polyamines are used for
which do not contain aluminium. The polyamines complete system processing. Neutral amines,
in the product form a protective film that creates reacting with free CO2, increase pH to the
a barrier between the oxygen dissolved in water required value and increase the efficiency of
and the metal surface, thus preventing corrosion polyamines.
and scale. In addition, the amine film changes the crystal
When using Cetamine® F3100 in closed pH chain of calcium carbonate, preventing it from
systems, pH levels are maintained at 9.0 - 9.5, attaching to the metal surface. The polymers,
thus, due to the passivation process speed, contained in Cetamine® F3100, reduce the
corrosion of copper and carbon steel is stopped. settling of calcining deposits.
The amines in Cetamine® F3100 modify the DOSAGE
crystalline chain of calcium carbonates to form It is normally recommended to use a dosage of
an anti-corrosion coating. Copolymers stop the 1 l/m3. The dosage depends on several system
formation of calcining deposits. parameters: temperature and total hardness.

SPECIFICATION USAGE
Cetamine® F3100 is a liquid product consisting The Cetamine® F3100 is sprayed directly into
of a specific copper inhibitor, polyamines the circulation system.
(which create a film), polymers and neutral The feed water is treated with automatic
amines. dosing system that regulates the product flow
Form: colorless/light according to the water quantity supplied. All
yellow liquid parts of the product feeding equipment must
pH (1 % liquid): 11,4 ± 0,3 be made of alkali-resistant materials (e.g.
Density 1,00 ± 0,03 g/cm3 PVC, PE).
(20°C/68°F): The product is not compatible with Viton.
Ability to the product is not Cetamine® F3100 should be used undiluted.
dissolve: recommended to ANALYTIC CONTROL
be diluted The quantity of Cetamine® F3100 is
determined according to the concentration of
IMPACT ON THE ENVIRONMENT the amine film formed using the A17 Amin I
Please read the safety data sheet. (BK-Giulini) analysis or the Rose Bengale A18
method.
ACTION Polyamines are supported in amounts of at
During processing, polyamines form a mono- least 2 g/m3.
molecular film on the metal surface, which Sufficient dosage of Cetamine® F3100 should
creates a barrier between water and metal. be checked with an additional pH level
The film reduces by 90% the oxygen flow rate measurement. In this case, it should be
to the metal surface, thus reducing corrosion. between 9.0 and 9.5.
SAFETY
Please read the safety data sheet.

ŠOMIS, JSC
Energetikų g. 6
LT-52461 Kaunas
Lietuva (Lithuania)
Phone + 370 37 407048
[email protected] www.somis.lt

You might also like