Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    G3406 Oil Cooler

    Uploaded by

    nobodymagdesign

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    G3406 Oil Cooler

    Uploaded by

    nobodymagdesign
    46 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views3 pages

    G3406 Oil Cooler

    Uploaded by

    nobodymagdesign

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product:  GAS ENGINE 
    Model:  G3406 GAS ENGINE 4FD 
    Configuration: G3406 Industrial Engine Natural Gas 4FD00001-UP 

    Disassembly and Assembly


    3406 SPARK IGNITED ENGINE
    Media Number -SENR3867-00 Publication Date -01/09/1992 Date Updated -08/09/2014 
     
     
    SENR38670003

    Oil Cooler
    SMCS - 1378-010

    Remove & Install Oil Cooler

    1. Drain the coolant from the engine.

    2. Drain the oil from the oil cooler.

    3. Disconnect tube assembly (1).

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
    G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 2 of 3

    4. Remove four bolts (2) on rear bonnet (3), four bolts (4) and two bolts (5) on front bonnet (6). Remove the front and rear bonnets with
    engine oil cooler (7) as an assembly.

    NOTE: Put marks on the oil cooler and bonnets to aid in assembly.

    5. Remove bonnet (3) from the oil cooler (7), and remove the O-ring seal from the bonnet.

    6. Remove bonnet (6) and adapter (8) from oil cooler (7), and remove the O-ring seals from the adapter.

    7. Use a 3.175 mm (.125 in) diameter rod to clean each tube of the engine oil cooler.

    NOTE: The following steps are for the installation of the engine oil cooler.

    8. Replace any O-ring seals that are worn or damaged, and put clean engine oil on them.

    9. Put the O-ring seals on adapter (8), and install the adapter and bonnet on oil cooler (7).

    10. Install the O-ring seal on bonnet (6) and install the bonnet on the oil cooler.

    11. Put the O-ring seals in position on the oil filter base.

    12. Put new gaskets in position on the engine, water pump and tube and install oil cooler (7) on the oil filter base.

    13. Install bolts (2), (4) and (5).

    14. Check the oil level in the engine. See the Maintenance Manual.

    15. Fill the cooling system to the correct level. See the Maintenance Manual.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023
    G3406 Industrial Engine Natural Gas 4FD00001-UP(SEBP1772 - 94)/Basic Search Page 3 of 3

    Copyright 1993 - 2023 Caterpillar Inc.  Sun Feb 19 17:56:01 UTC+0100 2023 
    All Rights Reserved. 
    Private Network For SIS Licensees. 

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp... 2/19/2023

    You might also like