quantum D 210 x 400/quantum D 250 x 400/quantum D 250 x 550

Lathes for the demanding user.“VARIO” type with infinitely variable speed control and
for quantum D 250 with frequency converter “Made in Germany”

· Solid, aged prismatic lathe bed made of grey casting, matured at least six months, inductively hardened (HRC 42-52) and precision ground
· quantum D 250 “Vario” type with frequency converter “Made in Germany” with extreme high-torque and mostly constant torque progression
· Hardened and ground slideways
· Guaranteed concentricity precision of the spindle nose less than 0.009 mm
· Concentricity precision - lathe chuck less than 0.05 mm
· Highly precise manufacturing
· Automatic longitudinal/leading spindle drive
· Taper roller bearing of P5 quality
· Rolled trapezoid spindles
· Thrust bearing
· Leading spindle running on two porous bearings
· With leading spindle for threading or
automatically longitudinal turning
· Large range of threading due to change gear kit
· High-grade lathe chuck protection
· Right-/left-handed rotation switchable on the
control panel
· Emergency-stop button and low-voltage release
· Manufactured according to DIN 8606
(toolmaker’s precision)
· Test certificate
· Stable value

Model D 210 x 400 D 250 x 400 D 250 x 550

Fig.: D 210 x 400 Vario
Item No (230 V) 342 0321 342 0400 342 0550
€ (VAT excl.) 889.00 990.00 1,090.00
Extent of supply
Item No (400 V) - 342 0403 342 0553
€ (VAT excl.) - 990.00 1,090.00 · 3-jaw chuck Ø 100 mm (D210)
· 3-jaw chuck Ø 125 mm (D250)
· Steady center MT2
Model D 210 x 400 Vario* D 250 x 400 Vario* D 250 x 550 Vario*
· Steady center MT3
Item No (230 V) 342 0324 342 0404 342 0554 · Lathe chuck protection
€ (VAT excl.) 1,190.00 1,690.00 1,790.00 · Lathe dog
· HSS cutting tool
Features of performance · Splash board
Electrical connection · Chip tray
Motor 750 W 230 V ~50 Hz 750 W ~50 Hz 750 W ~50 Hz · Quadruple tool holder
Machine data · Operating tool
Center height 105 mm 125 mm 125 mm · Change gear kit, 10 pcs.
from 0.4 up to 3 mm and inch-based
Center width 400 mm 450 mm 550 mm
(44-10 threads/”) thread
Turning Ø via lathe bed 210 mm 250 mm 250 mm
· Test certificate
Bed width 125 mm 135 mm 135 mm
Spindle speed 125 - 2,000 rpm 125 - 2,000 rpm 125 - 2,000 rpm Optional accessories
Number of steps 6 steps 6 steps 6 steps
· Digital measurement system MPA 3-S
*Spindle speed Vario 150 - 2,200 rpm 20 - 2,500 rpm 20 - 2,500 rpm Item No. 338 3902; € 699.- (VAT excl.)
Spindle taper MT 3 MT 3 MT 3 · Factory assembly MPA 3-S
Spindle hole 21 mm 21 mm 21 mm Item No. 900 0420; € 390.- (VAT excl.)
Top slide - travel 70 mm 70 mm 70 mm i Information for MPA 3-S on page 92
Compound slide - travel 110 mm 110 mm 110 mm
Tailstock taper MT 2 MT 2 MT 2
Tailstock sleeve travel 70 mm 70 mm 70 mm
Longitudinal feed 0.1 - 0.2 mm/rev 0.1 - 0.2 mm/rev 0.1 - 0.2 mm/rev
Pitch - Metric 0.4 - 3.5 mm/rev 0.4 - 3.5 mm/rev 0.4 - 3.5 mm/rev
Pitch - Inch 44 - 10 threads/1“ 44 - 10 threads/1“ 44 - 10 Gg/1“
Quadruple tool holder seat height 12.5 mm 13 mm 13 mm
Dimensions
Length x Width x Height 880 x 500 x 440 mm 1,010 x 500 x 500 mm 1,110 x 500 x 460 mm
Net weight 105 kg 110 kg 120 kg

152
 e lathes
a nt to retrofit th
You w d D 250
to
D 210 an
hnology
?
CNC tec
lem! D210 x 400
No prob Slide
6 on
Informat
ion from
page 12 · Precisely machined D250 x 400
· Handwheels with adjustable
Trapezoid spindles
· Rolled
Chip protection
· At the top slide precision scaling of 0.04/0.01 D250 x 550
mm
Tailstock
· Quadruple tool holder
· Adjustable for taper turning
· All guidings adjustable via V-
· Tailstock spindle sleeve and
ledges
handwheel with adjustable
precision scaling of 0.02 mm
Change gear kit
· For threading
· Easy and fast speed
change via V-belts

Turning
Taper roller bearings
· Two pcs
· P5 quality
Thrust bearing

Leading spindle
· Running on two porous bearings

Prismatic bed
· Solid, aged prismatic bed made
of grey casting, matured at least
six months
· Inductively hardened (HRC 42-52)
· Precision ground
Machine substructure with shelves
· D 250 x 400: L x W x H: 870 x 380 x 748 mm
Fig.: D 250 x 550
· Item No. 344 0407; € 230.- (VAT excl.)
· D 250 x 550: L x W x H: 1,000 x 380 x 748 mm
· Item No. 344 0507; € 230.- (VAT excl.)
Accessories D 210 Item No € (VAT excl.) Accessories D 250 Item No € (VAT excl.)
· 3-jaw chuck Ø 100 mm 344 1010 269.00 · 3-jaw chuck Ø 125 mm 344 1025 279.00
· 4-jaw chuck Ø 100 mm 344 1012 299.00 · 4-jaw chuck Ø 125 mm 344 1027 319.00
· Lathe chuck flange Ø 100 mm 344 0312 70.00 · Lathe chuck flange Ø 125 mm 344 0511 70.00
· Lathe chuck flange Ø 125 mm 344 0313 70.00 · Plane clamping disk Ø 250 mm 344 0552 50.00
· Plane clamping disk Ø 200 mm 344 0352 50.00 · Revolving center MT2 344 0702 45.00
· Revolving center MT 2 344 0702 45.00 · Steady rest 344 0515 45.00
· Steady rest 344 0315 45.00 · Follow rest 344 0510 45.00
· Follow rest 344 0310 45.00 · Cutting tool kit HM 8 mm, 7 pcs. 344 1011 89.00
· Cutting tool kit HM 8 mm. 7 pcs. 344 1011 89.00 · Cutting tool kit 8 mm, 11 pcs. 344 1008 59.90
· Cutting tool kit 8 mm, 11 pcs. 344 1008 59.90 · Cutting tool kit HM 10 mm, 7 pcs. 344 1111 110.00
· Cutting tool kit HM 10 mm, 7 pcs. 344 1111 110.00 · Cutting tool kit 10 mm, 11 pcs. 344 1108 59.90
· Cutting tool kit 10 mm, 11 pcs. 344 1108 59.90 · Cutting tool kit HM 12 mm, 9 pcs. 344 1211 120.00
· Cutting tool kit HM 12 mm, 9 pcs. 344 1211 120.00 · Draw-in collet chuck ER 25 344 0505 80.00
· Draw-in collet chuck ER 25 344 0305 70.00 · Draw-in collet chuck ER 32 344 0506 90.00
· Draw-in collet chuck ER 32 344 0306 79.00 · Collet chuck kit ER 25. 1 - 16 mm, 15 pcs. 344 1109 240.00
· Collet chuck kit ER 25, 1 - 16 mm, 15 pcs. 344 1109 240.00 · Collet chuck kit ER 32. 3 - 20 mm, 18 pcs. 344 1122 260.00
· Collet chuck kit ER 32, 3 - 20 mm, 18 pcs. 344 1122 260.00 · Quick-action tool holder SWH 1-A 338 4301 350.00
· Quick-action tool holder SWH 1-A 338 4301 350.00 · Factory assembly SWH 900 0401 60.00
· Factory assembly SWH 900 0401 60.00 · Add-on adapter for assembly of upright
and milling head of the BF20(L) Vario 335 6572 99.00
More accessories from page 76 on · Add-on adapter for assembly of upright
and milling head of the BF16 Vario 335 6568 99.00

Machines are CE compliant 153